Answer: The concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.
Explanation:
The ratio of concentration of products and reactants raised to the power of their coefficients is called equilibrium constant. The symbol used to denote equilibrium constant is [tex]K_{eq}[/tex].
As the given reaction equation is as follows.
[tex]2NO_{2}(g) \rightleftharpoons N_{2}O_{4}(g)[/tex]
The expression for equilibrium constant of this reaction is as follows.
[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}[/tex]
Now, substitute the given values into above formula as follows.
[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}\\67.3 = \frac{(0.2)}{[NO_{2}]^{2}}\\So, [NO] = \sqrt{\frac{0.2}{67.3}}\\= 0.0545 M[/tex]
Thus, we can conclude that the concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.
What is the Molar mass of zinc
65.38 u (or g)
I just searched it up
Which of the following involves a change in chemical properties
Answer: A chemical change occurs when the substance's composition is changed. When bonds are broken and new ones are formed a chemical change occurs.
When water is boiling in a pot, heat energy is being transferred throughout the water by which type of heat transfer?
O Convection
O Conduction
O Radiation
Answer:
it would be Convection.
What determines how atoms will bond?
Answer:
Explanation:
The number of electrons in the outermost shell of a particular atom determines its reactivity, or tendency to form chemical bonds with other atoms.
Answer correctly for brainliest
only answer the question with the 4 choices in the middle
. Explain why some desert animals excrete uric acid rather than ammonia.
(2 marks)
Answer:
AFAIK
Explanation:
uric acid is much less toxic than ammonia, hence bigger concentrations of it are tolerated in the body. This means you can excrete it while excreting very little water - beneficial wherever water's not abundant.
There's a tradeoff though, uric acid requires more energy to synthesize than ammonia, so pretty much all fish, say, excrete ammonia rather than uric acid - it's no problem to dilute ammonia since there's no water shortage.
Jonathan raised 60 goats, then entered into a series of business transactions. He traded all the goats for sheep at an exchange rate of 5 goats for 7 sheep. Next, he exchanged all the sheep for hogs at a rate of 4 sheep for 2 hogs. How many hogs did he get?
Answer:
just awser
eeww
Explanation:
How many grams of water can be heated from 15.0 oC to 55oC using 4250.0 J.
Answer:
25.42 grams
Explanation:
The specific heat of water is 4.18 J/g •°C, so that means that it takes 4.18 joules of energy to raise one gram of water 1 °C.
Change in temp = 55 - 15 = 40°C
So we can calculate how much energy it would take to raise the temp of one gram of water by one degree using the following
(4.18 J/g•°C) * (40°C) * (1 gram) = 167.2 J
So if it takes 167.2 J of energy to raise on gram of water 40°C, we now we can calculate the amount of grams of water that can heated with 4250 J of energy
(4250 J) ÷ (167.2 J) = 25.42 grams of water can be heated from 15°C to 55°C
True or false: If a nuclear chain reaction is uncontrolled, it produces a lot of energy all at once. This is
what happens in an atomic bomb.
Answer: False, I think...
Explanation:
Answer:
True
Explanation:
It is uncontrolled
What molecule represents this structure
A)NH4
B)NH3
C)NH4+
D)NH3+
Explanation:
As I think Option C is correct i.e. NH4+.
intermolecular forces between particles are
Explanation:
Intermolecular forces hold multiple molecules together and determine many of a substance's properties. All of the attractive forces between neutral atoms and molecules are known as van der Waals forces, although they are usually referred to more informally as intermolecular attraction.
Intermolecular forces are the forces of attraction or repulsion which act between neighboring particles (atoms, molecules, or ions ). These forces are weak compared to the intramolecular forces, such as the covalent or ionic bonds between atoms in a molecule.
what is the ph of a 8.4x10^-6 M H+ solution?
If you have a solution that is 15 percent by mass of KCl in benzene, what is the new boiling point?
Answer:
https://www.chegg.com/homework-help/questions-and-answers/1-10-points-solution-15-percent-mass-kcl-benzene-new-boiling-point--901-c-b-921-c-c-821-c--q63751186
Explanation: Thats your answer
What are the components of DNA?
A. ribose sugar, cytosine, guanine, adenine, thymine, and phosphate group
B. ribose sugar, cytosine, guanine, adenine, uracil, and phosphate group
C. deoxyribose sugar, cytosine, guanine, adenine, thymine, and phosphate group
D. deoxyribose sugar, cytosine, guanine, adenine, uracil, and phosphate group
Answer:
C
Explanation:
A-T G-C
Answer:
C
Explanation:
EDGE 2022
As the temperature in a sample of gas molecules decreases, which
of the other properties of the gas molecules could be caused to
increase or decrease? *
(Please help me)
Answer:
See Explanation
Explanation:
The kinetic energy of gas molecules is related to the temperature of the gas because temperature is a measure of the average kinetic energy of the molecules of a gas hence the lower the temperature of the gas the lower the average kinetic energy of the molecules of the gas.
The volume of a given mass of gas is directly proportional its absolute temperature(Charles's law). Hence, as the temperature of the gas gas decreases, the gas volume also decreases.
The number of gas molecules is totally independent of the temperature of the gas hence it stays the same.
As the temperature decreases, the number of collision of gas particles decreases as the kinetic energy of the gas particles decreases.
The pressure of a given mass of gas is related to the movement of gas particles. Hence, the lower the temperature the lower the pressure of the gas. Pressure and temperature are directly related hence pressure decreases as temperature decreases.
4.3 x 10^2 - 7.0 x 10^2 in scientific notation
Question 4 (10 points)
If a sollition has a pOH of 5.2 the [OH-] of the solution is
оа
6x 10-6 M
Ob
6.3 x 10-6 M
Oc
1.58 x 10-5M
Od
2x10-5M
Answer:
Explanation:
which molecule is butene
Answer:
Option C is the answer
Butene, also called Butylene, 4 isomeric compound belonging to the series of olefinic hydrocarbons. The chemical formula is C4H8, option c is correct.
What are the 4 isomers of butene?Butene, also called Butylene, four isomeric Combinations belong to the series of olefinic hydrocarbons. The chemical formula is C4H8.
The isomeric forms are 1-butene, cis-2-butene, trans-2-butene, and isobutylene.
Thus, option "C" is correct. the chemical formula is C4H8.
To learn more about Butene click here:
https://brainly.com/question/13186233
In this experiment, you will need to prepare 250.0 mL of 0.100 M KCl(aq) solution. Determine the mass in grams of potassium chloride required to prepare this solution. Type your numerical answer (no units) in the box below. Even though the number of significant figures is limited to three by the inputs, please report your answer to four significant figures.
Answer: The mass in grams of potassium chloride required to prepare this solution is 1.862 grams
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in ml
moles of [tex]KCl[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{xg}{74.5g/mol}[/tex]
Now put all the given values in the formula of molality, we get
[tex]0.100=\frac{x\times 1000}{74.5g/mol\times 250.0ml}[/tex]
[tex]x=1.862g[/tex]
Therefore, the mass in grams of potassium chloride required to prepare this solution is 1.862 grams
Colligative properties of solutions include all of the following except: a. an increase in the osmotic pressure of a solution upon the addition of more solute b. elevation of the boiling point of a solution upon addition of a solute to a solvent c. an increase of reaction rate with increase in temperature d. depression of the freezing pont of a solution upon addition of a solute to a solvent e. depression of vapor pressure upon addition of a solute to a solvent
Answer:
Option C, an increase of reaction rate with increase in temperature
Explanation:
Colligative properties are as follows
a) Decrease of vapor pressure
b) Increase of boiling point
c) Reduction of freezing point
d) Increase of osmotic pressure
There is no impact on reaction rate and hence it is not a colligative property.
Thus, option c is the right choice
An increase of reaction rate with increase in temperature isn't an example
of colligative properties of solutions
Colligative properties of solutions depend on the ratio of the number of
solutes to that of the solvent(concentration) and not on the nature of the
substances involved.
Examples of colligative properties include vapor pressure lowering, boiling
point elevation, freezing point depression, and osmotic pressure. Increase of
reaction rate with increase in temperature is therefore not an example of
colligative properties of solutions.
Read more on https://brainly.com/question/24260365
how many moles of Li2SO4 molecules are in 12.71g?
Answer:
₰₮₤₳V₤
Explanation:
First you must calculate the number of moles in this solution, by rearranging the equation. No. Moles (mol) = Molarity (M) x Volume (L) = 0.5 x 2. = 1 mol.
For NaCl, the molar mass is 58.44 g/mol. Now we can use the rearranged equation. Mass (g) = No. Moles (mol) x Molar Mass (g/mol) = 1 x 58.44. = 58.44 g.
How/what do I answer this?--> "heat of the chemical reactions"
like this is the question :/
Answer:
The heat of reaction is the energy that is released or absorbed when chemicals are transformed in a chemical reaction. It describes the change of the energy content when reactants are converted into products.
Explanation:
Yeah, that would confuse me a bit but then you read it and then you will get that answer above! Have a great rest of your day!
Write the balanced half-reaction that occurs at the anode in a lead-acid (storage) battery during discharge. Phases are optional. anode half-reaction: Write the balanced half-reaction that occurs at the cathode in a lead-acid (storage) battery during discharge. Phases are optional. cathode half-reaction: Write the balanced overall cell reaction that occurs in the lead-acid (storage) battery during discharge. Phases are optional. overall cell reaction:
Answer: Anode: [tex]Pb+SO_4^{2-}\rightarrow PbSO_4+2e^-[/tex]
Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]
Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]
Explanation:
Lead storage battery is a secondary cell used in automobiles and invertors. The anode is made up of lead and undergoes oxidation during discharging and cathode is made up of lead oxide and acts as cathode during discharging. The electrolyte used is dilute .
Lead storage battery acts as electrochemical cell while discharging.
Discharging reaction for Anode:
Discharging reaction for Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]
Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]
A lead storage battery is an energy storage device. At the anode lead and sulfate ion reacts to produce Lead(II) sulfate and release two electrons.
What are anode and cathode?In secondary cells or the recharge-discharge cells during recharge, the positive electrode is the anode, while during discharge cathode is the positive electrode.
The anode (lead) of the cell undergoes an oxidation reaction during the discharge, whereas the lead oxide or the cathode undergoes reduction.
The discharging reaction at the anode of the cell is given as,
[tex]\rm Pb + SO_{4}^{2-} \rightarrow PbSO_{4} + 2e^{-}[/tex]
The discharging reaction at the cathode of the cell is given as,
[tex]\rm PbO_{2} + 4H^{+} + SO_{4}^{2-} + 2 e^{-} \rightarrow PbSO_{4} + 2H_{2}O[/tex]
The overall cell reaction is given as,
[tex]\rm Pb + 2SO_{4}^{2-} + PbO_{2} + 4H^{+} \rightarrow 2PbSO_{4} + 2H_{2}O[/tex]
Therefore, the gain and loss of electrons are represented at the cathode and the anode of the cell.
Learn more about discharge battery here:
https://brainly.com/question/8341588
8. Calculate (H^+), (OH^-), pOH and the pH for a 0.00024 M solution of calcium hydroxide. Must show work!
Answer:
1. [H⁺] = 2.0×10¯¹¹ M
2. [OH¯] = 4.8×10¯⁴ M
3. pOH = 3.3
4. pH = 10.7
Explanation:
From the question given above, the following data were obtained obtained:
Molarity of Ca(OH)₂ = 0.00024 M
We'll begin by calculating the concentration of the hydroxide ion [OH¯]. This can be obtained as follow:
Ca(OH)₂ (aq) —> Ca²⁺ + 2OH¯
From the balanced equation above,
1 mole of Ca(OH)₂ produced 2 moles of OH¯.
Therefore, 0.00024 M Ca(OH)₂ will produce = 2 × 0.00024 = 4.8×10¯⁴ M OH¯
Thus, the concentration of the hydroxide ion [OH¯] is 4.8×10¯⁴ M
Next, we shall determine the pOH of the solution. This can be obtained as follow:
Concentration of the hydroxide ion [OH¯] = 4.8×10¯⁴ M
pOH =?
pOH = –Log [OH¯]
pOH = –Log 4.8×10¯⁴
pOH = 3.3
Next, we shall determine the pH of the solution. This can be obtained as follow:
pOH = 3.3
pH =?
pH + pOH = 14
pH + 3.3 = 14
Collect like terms
pH = 14 – 3.3
pH = 10.7
Finally, we shall determine the concentration of hydrogen ion [H⁺]. This can be obtained as follow:
pH = 10.7
Concentration of hydrogen ion [H⁺] =?
pH = –Log [H⁺]
10.7 = –Log [H⁺]
Divide both side by –1
–10.7 = Log [H⁺]
Take the antilog of –10.7
[H⁺] = Antilog (–10.7)
[H⁺] = 2.0×10¯¹¹ M
SUMMARY:
1. [H⁺] = 2.0×10¯¹¹ M
2. [OH¯] = 4.8×10¯⁴ M
3. pOH = 3.3
4. pH = 10.7
What type of compound is a salt
Answer: Salt is an ionic compound.
Explanation:
A compound formed by transfer of electrons from one atom to another is called an ionic compound.
For example, chemical formula of salt is NaCl (also called table salt).
Salt is formed when sodium (atomic no. 11) donates its one valence electron to chlorine (atomic no. 17). As a result, sodium ion and chlorine ion chemically combine together and form the compound NaCl.
Thus, we can conclude that salt is an ionic compound.
A gas has a volume of 6.00 liters at a temperature of 300 K and a pressure of 1.00 atm what is the volume of the gas in liters at a temperature of 600 K and a pressure of 3.00 atm
Answer:
V₂ = 4.00 L
Explanation:
Given that:
Volume (v1) = 6.00 L
Temperature (T1) = 300 K
Pressure (P1) = 1.00 atm
VOlume (V2) = unknown???
Temperature (T2) = 600 K
Pressure (P2) = 3.00 atm
Using combined gas law equation:
[tex]\dfrac{P_1V_1}{T_1}= \dfrac{P_2V_2}{T_2}[/tex]
[tex]\dfrac{1 \times 6}{300} = \dfrac{3 \times V_2}{600}[/tex]
[tex]\dfrac{1}{50} = \dfrac{1 \times V_2}{200}[/tex]
200 = 50V₂
V₂ = 200/50
V₂ = 4.00 L
In an effort to maintain homeostasis, the organ systems of the human body work to keep the body's internal water level constant. Which of the following statements describe how the human body responds when its internal water level drops too low?
A. The skeletal system produces more circulating blood cells that insecure the body’s water intake
B. The excretory system signals the kidneys to retain more water and produce more concentrated urine to decrease water loss.
C. The nervous system signals the muscles to constrict , holding more water in the digestive track and decreasing water loss .
D.The excretory system signals the kidneys to release more water into the bladder to increase water loss .
Can someone please help me with this question.
Answer:
A-Sphalerite + Dioxygen+Zinc Oxide+Sulfur Trioxide
B-Sodium+Magnesium+Sodium iodide
Explanation:
Heyyy love good luck i may be wrong on letter B so if it is thats my bad but A should be correct :)
ibigay ang kahulugan nito ayun sa paliliwanag
konduktor piloto drayber makinista
Answer:
konduktor
- ang konduktor ay maaaring isang konduktor nga koryente, train o isang taong namumuno sa isang orkestra o isang grupo ng mga mang-aawit.
piloto
-isang tao na tagalipad ng ereplano
drayber
- isang tao na nagmamaniho ng sasakyan
makinista
-ay isang tao na nagpapakilos o nagpapagana ng makina
please give me brainliest.
For a chemical reaction, the activation energy for the forward reaction is +181 kJ and the activation energy for the backward reaction is +62 kJ. What is the overall energy change for the forward reaction?
Given :
For a chemical reaction, the activation energy for the forward reaction is +181 kJ and the activation energy for the backward reaction is +62 kJ.
To Find :
The overall energy change for the forward reaction.
Solution :
The overall energy change for the forward reaction is :
[tex]\Delta E_f = E_f - E_b\\\\\Delta E_f = 181 - 62 \ Kj\\\\\Delta E_f = 119 \ Kj[/tex]
Therefore, the overall energy change for the forward reaction is 119 Kj.