Calculate the time required to fly from P to B, in terms of the eccentricity e and the period T. B lies on the minor axis.

Answers

Answer 1

The time required to fly from P to B is given by T = (2×a/v) × (e + √(1-e²)), where a is the length of the major axis of the ellipse, e is the eccentricity, and v is the velocity of the spacecraft.

What is Kepler's second law?

Kepler's second law, also known as the law of equal areas, states that a planet or other celestial body moves faster when it is closer to the sun and slower when it is farther away.

Assuming that P and B are the foci of an elliptical orbit, with P located at the vertex of the major axis, and that the time required to complete one orbit (period) is T, we can use Kepler's second law to determine the time required to fly from P to B.

Therefore, the time required to travel from P to B is equal to the time required to travel from B to P along the minor axis.

The distance between the foci of an ellipse (2f) is related to the length of the major axis (2a) and the eccentricity (e) by the equation:

2f = 2a×e

Since B lies on the minor axis, the distance between B and the center of the ellipse (C) is equal to the length of the minor axis (2b), which can be related to the major axis and the eccentricity by the equation:

2b = 2a×√(1-e²)

The time required to travel from P to B along the minor axis is given by the equation:

T/2 = (1/2) × [(2b + 2f) / v]

Substituting the expressions for 2f and 2b gives:

T/2 = (1/2) × [(2ae + 2a√(1-e²)) / v]

Simplifying the expression gives:

T = (2×a/v) × (e + √(1-e²))

To know more about distance visit:

https://brainly.com/question/31194640

#SPJ1


Related Questions

A hockey player does work on a hockey puck in order to propel it from rest across the ice. When a constant force is applied over a certain distance, the puck leaves his stick at speed v. If instead he wants the puck to leave at speed 2v, by what factor must he increase the distance over which he applies the same force?Squareroot 2 2 2 Squareroot 2 4 8

Answers

To increase the speed of the hockey puck from v to 2v, the player must increase the distance over which he applies the same force by a factor of √2.

This is because the kinetic energy of the puck is proportional to the square of its velocity, so to double the velocity, the player must increase the kinetic energy by a factor of 2² = 4. Since work is the change in kinetic energy, the player must apply the same force over a distance that is √4 = 2 times greater in order to achieve this increase in kinetic energy, which corresponds to a velocity of 2v. Therefore, the required increase in distance is √2 times the original distance.

Learn more about speed here:https://brainly.com/question/13943409

#SPJ11

find the power dissipated in w by the 23.5 ω resistor when connected in series with the rest of the circuit.

Answers

the power dissipated in w by the 23.5 ω resistors when connected in series with the rest of the circuit is 1.39 W.

To find the power dissipated by the 23.5 Ω resistors when connected in series with the rest of the circuit, we need to first calculate the total resistance of the circuit. This can be done by adding up the individual resistances in series. Once we have the total resistance, we can use Ohm's law to find the current flowing through the circuit. Finally, we can use the formula P = I^2R to calculate the power dissipated by the 23.5 Ω resistors.

Let's assume that the circuit consists of three resistors in series: R1 = 10 Ω, R2 = 23.5 Ω, and R3 = 15 Ω. The total resistance of the circuit is then:

R_total = R1 + R2 + R3 = 10 Ω + 23.5 Ω + 15 Ω = 48.5 Ω

To find the current flowing through the circuit, we can use Ohm's law:

I = V / R_total

where V is the voltage across the circuit. If we assume that V = 12 V, then:

I = 12 V / 48.5 Ω = 0.2474 A

Finally, we can use the formula P = I^2R to calculate the power dissipated by the 23.5 Ω resistors:

P = I^2R2 = (0.2474 A)^2 x 23.5 Ω = 1.39 W

Therefore, the power dissipated by the 23.5 Ω resistors when connected in series with the rest of the circuit is 1.39 W.

Learn more about power  at  brainly.com/question/29575208

#SPJ11

what are the mole fractions of n2o4 and no2 once the pressure stabilizes at 2.96 atm?

Answers

TheThe mole fraction of N2O4 is 1.52/(1.52 + 1) = 0.603, and the mole fraction of NO2 is 0.397.

To determine the mole fractions of N2O4 and NO2, we need to use the partial pressures of each component and the total pressure of the system.

Let x be the mole fraction of N2O4, then the mole fraction of NO2 is (1-x). The total pressure of the system is 2.96 atm, which is equal to the sum of the partial pressures of N2O4 and NO2.

From the chemical equation for the reaction of N2O4 to NO2:

N2O4(g) ⇌ 2NO2(g)

we know that the equilibrium constant Kp is equal to the partial pressure of NO2 squared, divided by the partial pressure of N2O4:

Kp = (PNO2)^2/PN2O4

At equilibrium, Kp is equal to the ratio of the product of the mole fractions of NO2 and N2O4, raised to their stoichiometric coefficients, to the product of the mole fractions of N2O4 raised to its stoichiometric coefficient:

Kp = [(1-x)^2]/x

We can rearrange this equation to solve for x:

x = [(Ptotal)(Kp)]/[1 + Kp]

Substituting the values given, we get:

x = [(2.96 atm)(4.63)]/[1 + 4.63] = 1.52 atm

Therefore, the mole fraction of N2O4 is 1.52/(1.52 + 1) = 0.603, and the mole fraction of NO2 is 0.397.

Visit to know more about Mole fraction:-

brainly.com/question/31285244

#SPJ11

Determine the positions of a simple harmonic oscillator at which its speed is one-third of the maximum speed?

Answers

Answer:

x = ± √(8/9) A.

Explanation:

For a simple harmonic oscillator with amplitude A and angular frequency ω, the speed at position x is given by v = ω√(A^2 - x^2).

The maximum speed occurs at the equilibrium position, where x = 0, and is given by vmax = ωA.

To determine the positions at which the speed is one-third of the maximum speed, we need to solve the equation:

v = (1/3)vmax

ω√(A^2 - x^2) = (1/3)ωA

√(A^2 - x^2) = (1/3)A

A^2 - x^2 = (1/9)A^2

8/9 A^2 = x^2

x = ± √(8/9) A

Therefore, the positions at which the speed of the simple harmonic oscillator is one-third of the maximum speed are x = ± √(8/9) A.

what is the intensity at a point on the circle at an angle of 4.60 ∘ from the centerline? express your answer in watts per square meter.

Answers

The intensity at a point on the circle at an angle of 4.60 ∘ from the centerline is I = I0×0.9976 watts per square meter.

What is centerline?

Centerline is a term used to refer to a line that is equidistant from two opposite edges of a given object or area. It is a line that divides the object or area in two equal halves, running from one end to the other. Centerline can be found in a variety of objects, such as floors, walls, roofs, and roads, among many others. It is a line of symmetry, and is used to ensure that objects are properly aligned or balanced.

The intensity at a point on a circle at an angle of 4.60 ∘ from the centerline can be calculated by using the formula I = I0×cos(θ), where I0 is the intensity at the centerline and θ is the angle from the centerline.

In this case, I = I0×cos(4.60) = I0×0.9976.

Therefore, the intensity at a point on the circle at an angle of 4.60 ∘ from the centerline is I = I0×0.9976 watts per square meter.

To learn more about centerline

https://brainly.com/question/17034418

#SPJ1

using cbc and and iv=010, encrypt 111110001100?

Answers

using CBC with IV=010, the plain text 111110001100 would be encrypted as 1101 0010 1010.

Using CBC (Cipher Block Chaining) mode with IV (Initialization Vector) = 010, we can encrypt the plaintext message 111110001100 as follows:

- Divide the plaintext into 3 blocks of 4 bits each: 1111 1000 1100
- XOR the first block with the IV: 1111 ⊕ 010 = 1101
- Encrypt the XOR result with a block cipher (e.g. AES): assume we get the ciphertext block 1010
- XOR the ciphertext block with the second plaintext block: 1010 ⊕ 1000 = 0010
- Encrypt the XOR result with the same block cipher: assume we get the ciphertext block 0110
- XOR the second ciphertext block with the third plaintext block: 0110 ⊕ 1100 = 1010
- The final ciphertext is the concatenation of the three ciphertext blocks: 1101 0010 1010

Therefore, using CBC with IV=010, the plaintext 111110001100 would be encrypted as 1101 0010 1010.

To learn more about CBC https://brainly.com/question/30859463

#SPJ11

Suppose the 1.3 km main span of steel for the Golden Gate Bridge had no expansion joints. How much longer (in meters) would the bridge be for an increase of 70C? It is assumed your answer will be in meters.
αsteel=11x10-6/C

Answers

The bridge increase at 70C is  7.7*[tex]10^{-11}[/tex]  m.  when Golden Gate Bridge  longer (in meters) would the bridge be for an increase of 70C.

How long are the Golden Gate Bridge's principal cables?

With a diameter of little over three feet, 7,659 feet in length, and 27,572 parallel wires, each of the two major cables is composed. The Golden Gate employs the world's longest bridge cables, which at the equator could circle the globe more than three times.

From one end to the other, how far is the Golden Gate Bridge?

To cross the Golden Gate Bridge, how long does it take? Walking each direction takes roughly 35 minutes because the bridge is 1.7 miles long.

Change of Length: ΔL= aΔT

[remember that the product of ΔL must then be multiplied by the length of the steel bridge (1.3K)]

To know more about Golden Gate Bridge visit:-

https://brainly.com/question/5314674

#SPJ1

a 2.0 kg metal hoop that has a radius of 20.0 cm rolls at a velocity of 10.0 m/s. it begins to climb at a 15o incline. how high does it get?

Answers

The hoop reaches a maximum height of 5.10 meters when it climbs the incline.

Why are it begins to climb at a 15o incline?

we need to use the principle of conservation of energy. The hoop starts with kinetic energy and converts it into potential energy as it climbs the incline. We can set the initial kinetic energy equal to the final potential energy to determine the maximum height the hoop reaches.

The initial kinetic energy of the hoop can be calculated as:

K = (1/2) ˣ m ˣ v²

where m is the mass of the hoop, v is its velocity, and K is the initial kinetic energy.

Plugging in the given values, we get:

K = (1/2) ˣ 2.0 kg ˣ (10.0 m/s)² = 100 J

The final potential energy of the hoop is given by:

U = m ˣ g ˣ h

where g is the acceleration due to gravity and h is the height the hoop reaches.

Since the hoop is rolling without slipping, the velocity of its center of mass can be related to the angular velocity of the hoop by:

v = R * w

where R is the radius of the hoop and w is its angular velocity.

Solving for the angular velocity, we get:

w = v / R = 10.0 m/s / 0.2 m = 50 rad/s

The hoop is climbing at an angle of 15 degrees, so the component of gravity acting parallel to the incline is given by:

F_parallel = m ˣ g ˣ sin(15)

Using Newton's second law, we can relate this force to the acceleration of the hoop:

F_parallel = m ˣ a

Solving for the acceleration, we get:

a = F_parallel / m = g ˣ sin(15)

Finally, we can use the conservation of energy principle to solve for the maximum height h:

K = U

(1/2)ˣ mˣ v² = m ˣ g ˣ h

h = (1/2) ˣ v² / g

Plugging in the values we calculated, we get:

h = (1/2) ˣ (10.0 m/s)² / (9.81 m/s²) = 5.10 m

Learn more about climbs incline

brainly.com/question/16958898

#SPJ11

find a general solution to the given differential equation. 25w''+60w'+36w=0 A general solution is w(t) =____

Answers

The general solution is w(t) = C₁e^(-6t/5) + C₂te^(-6t/5).

To find the general solution to the given differential equation, 25w'' + 60w' + 36w = 0, we will first solve the characteristic equation for the given homogeneous linear differential equation.

The characteristic equation is:
25r^2 + 60r + 36 = 0

By solving for r, we can determine the general solution. In this case, we can factor the equation:
(5r + 6)(5r + 6) = 0

Since both factors are the same, we have a repeated root:
r = -6/5

Now, we can construct the general solution using the repeated root:
w(t) = C₁e^(-6t/5) + C₂te^(-6t/5)

Learn more about differential equations at https://brainly.com/question/28099315

#SPJ11

Object A has density rho1. Object B has the same shape and dimensions as object A, but it is three times as massive. Object B has density rho2 such that
rho2 = rho1 / 3
rho2 = rho1 / 2
rho2 = 3 rho1
rho2 = 2 rho1

Answers

Object B has density rho₂ such that  rho₂ = 3 rho₁. From the given options, the third option is the correct one for the density.

Why is the density of the object B 3 times the first density?

The density of a particular thing or object is specified as its mass per unit volume. Let's assume that object A has a mass of m and a volume of V. Therefore, its density rho₁ is given by:

rho₁ = m/V

Now, object B has the same form and proportions as physical object A, but it is three times as big as the object A. This means that the mass of object B is 3m. Since the two objects have the same shape and dimensions, they have the same volume V. Therefore, the density rho₂ of object B is given by:

rho₂ = (3m)/V

Substituting m/V from the equation for rho₁, we get:

rho₂ = 3 rho₁

Therefore, the correct answer is rho₂= 3 rho₁.

Learn more about density here:

https://brainly.com/question/28464887

#SPJ1

red he ne laser light(633 nm in vacuum) is traveling through water with n=1.33 what is the speed of light in water
What is the wavelength of the laser beam in the liquid?

Answers

The wavelength of the laser beam in water is approximately 475.2 nm. The speed of light in a vacuum is 299,792,458 m/s. However, when light travels through a medium, such as water, it slows down. This is because light interacts with the atoms and molecules in the medium, which can cause it to change direction and speed.

In this case, the red helium-neon laser light is traveling through water with a refractive index of 1.33. The refractive index is a measure of how much a medium slows down light. To calculate the speed of light in water, we can use the formula:

speed of light in medium = speed of light in vacuum / refractive index

So, the speed of light in water would be:

speed of light in water = 299,792,458 m/s / 1.33
speed of light in water = 225,148,876 m/s

Therefore, the speed of light in water is approximately 225,148,876 m/s.

To calculate the wavelength of the laser beam in the liquid, we can use the formula:

wavelength in medium = wavelength in vacuum / refractive index

So, the wavelength of the laser beam in water would be:

wavelength in water = 633 nm / 1.33
wavelength in water = 475.2 nm

In summary, when light travels through a medium such as water, it slows down, and its wavelength changes. This is due to the interaction between light and the atoms and molecules in the medium.

In this case, the red helium-neon laser light has a wavelength of 633 nm in a vacuum, but its wavelength changes to approximately 475.2 nm when it travels through the water with a refractive index of 1.33.

To know more about wavelength refer here:

https://brainly.com/question/31143857#

#SPJ11

This question is for an Energy lab."What word (four letters long) describes the transfer of potential energy into kinetic energy?"I am just struggling a little conceptually with this one.

Answers

The word that describes the transfer of potential energy into kinetic energy is "work". Work is a fundamental concept in physics that describes the transfer of energy from one object to another as a result of a force acting over a distance.

When work is done on an object, energy is transferred to that object, and the object gains kinetic energy. The amount of work done on an object is equal to the force applied to the object multiplied by the distance over which the force is applied.

In the context of an energy lab, the transfer of potential energy into kinetic energy can be observed in many different systems. For example, a simple pendulum consists of a mass suspended from a fixed point by a string.

When the mass is raised to a certain height, it gains potential energy due to its position relative to the ground. When the mass is released, it begins to swing back and forth, and its potential energy is gradually converted into kinetic energy as it moves faster and faster.

The transfer of energy from potential to kinetic is a key concept in understanding many different systems in physics and engineering, and the word "work" is used to describe this transfer in a concise and accurate way.

Know more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ11

At a certain instant in time, an electromagnetic wave hasin the -z direction andin the +y direction. In what direction does the wave propogate? A) +z direction B) +x direction C) +y direction D) -x direction E) -z direction

Answers

The direction of an electromagnetic wave is given by the direction of its electric field vector and magnetic field vector.

Therefore, the answer is B) +x direction.

The direction of an electromagnetic wave is given by the direction of its electric field vector and magnetic field vector. In this case, the electric field vector is in the +y direction, and the magnetic field vector is in the -z direction.

The direction of propagation of the wave is given by the cross product of the electric and magnetic field vectors. Using the right-hand rule, we find that the direction of propagation of the wave is in the +x direction.

Therefore, the answer is B) +x direction.

Visit to know more about Electromagnetic wave:-

brainly.com/question/25847009

#SPJ11

A 1.3 kg bicycle tire with a radius of 30 cm rotates with an angular speed of 155 rpm. Find the angular momentum of the tire, assuming it can be modeled as a hoop. Answer needs to be in kg x m^2/s.

Answers

The Angular momentum of the bicycle tire is 1.90 kg x [tex]m^2/s[/tex].

The formula for angular momentum of a rotating object is L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
For a hoop, the moment of inertia is I = [tex]MR^2[/tex], where M is the mass of the object and R is the radius.
Using this formula, we can find the moment of inertia of the bicycle tire:

I = [tex](1.3 kg)(0.3 m)^2[/tex] = 0.117 kg x [tex]m^2[/tex]

Next, we convert the angular speed from rpm to rad/s:

ω = (155 rpm) x (2π/60) = 16.22 rad/s

Finally, we can calculate the angular momentum:

L = Iω = (0.117 kg x [tex]m^2[/tex])(16.22 rad/s) = 1.90 kg x [tex]m^2/s[/tex]

For more questions on Angular momentum, click on:

https://brainly.com/question/4126751

#SPJ11

Conservation of momentum - Internal Motion Problem A man with a mass of 70 kg
is standing on the front end of a flat railroad car, which has a mass of 1,000 kg
and a length of 10 m
. The railroad car is initially at rest relative to the track. The man then walks from one end of the car t
to the other at a speed of 1.0 m/s
relative to the track. Assume there is no friction in the wheels of the railroad car. (a) What happens to the cart while the man is walking? (b) How fast does the cart move? (c) What happens when the man stops at the rear of the car?

Answers

On conservation of momentum:

(a) The cart goes in the opposite direction as the man does.

(b) With a speed of 0.07 m/s, the cart proceeds in the opposite direction as the guy.

(c) the cart starts moving in the forward direction with the same velocity of 0.07 m/s.

How to  determine conservation of momentum?

(a) As per the conservation of momentum, the total momentum of the system is conserved. Initially, the system was at rest, but when the man starts walking towards the other end, he gains some momentum in the forward direction, which the cart has to compensate for. So, the cart moves in the opposite direction to that of the man's motion.

(b) Assume that the man moves a distance of 10 m, i.e., the length of the cart.

Therefore, the total distance covered by the man is 20 m (10 m forward and 10 m backward).

The momentum gained by the man while walking forward is (70 kg) x (1.0 m/s) = 70 kg m/s.

As the total momentum of the system is conserved, the cart gains an equal and opposite momentum of -70 kg m/s.

The mass of the cart is 1,000 kg, so its velocity can be calculated using the conservation of momentum formula:

Total initial momentum = Total final momentum

0 = (70 kg) x (1.0 m/s) + (1,000 kg) x V

V = -0.07 m/s

So, the cart moves in the opposite direction to that of the man's motion with a speed of 0.07 m/s.

(c) When the guy comes to a complete halt at the back of the automobile, he loses the momentum he got while going forward, and the cart obtains equal and opposite motion. As a result, the cart begins going ahead at the same velocity of 0.07 m/s.

Find out more on Conservation of momentum here: https://brainly.com/question/7538238

#SPJ1

Ernesto's physician prescribes a loop diuretic, which acts directly on what part of the kidney?a. Nephronsb. Bowman's capsulec. Renal pelvisd. Loop of Henle

Answers

Ernesto's physician prescribes a loop diuretic, which acts directly on the Loop of Henle in the kidney. Option D.

Loop diuretics are a type of medication that act directly on the Loop of Henle, which is a section of the nephron in the kidney. The Loop of Henle is responsible for reabsorbing water and electrolytes, such as sodium and chloride, from the filtrate produced by the glomerulus of kidneys.

Loop diuretics inhibit the transport of sodium and chloride ions across the walls of the Loop of Henle, which prevents the reabsorption of these ions and leads to an increased excretion of water and electrolytes in the urine. This makes loop diuretics useful for treating conditions such as edema, congestive heart failure, and hypertension.

To learn more about kidneys, click here:

https://brainly.com/question/29992259

#SPJ11

why do you think it is essential to measure current in series instead of in parallel? what would happen if you simply connected the current probe to opposite sides of the resistor?

Answers

Measuring current in series is essential because it ensures that the current passing through each component in the circuit is the same. In a series circuit, there is only one path for the current to flow, which means that the current measured at any point is the same throughout the entire circuit.

If you were to connect a current probe in parallel, you would create an additional path for the current to flow, which could lead to an inaccurate measurement. Connecting the probe across the resistor (opposite sides) in parallel would essentially create a short circuit, bypassing the resistor and causing a potentially dangerous situation with increased current flow, potential damage to the circuit, and an incorrect current reading.

Therefore, it's essential to measure current in series to ensure accuracy and maintain the safety of the circuit.

Learn more about current here:

https://brainly.com/question/13076734

#SPJ11

what is the potential energy of two charges 3.6 millicoulombs and 2.5 millicoulombs separated by a distance of 10 meters? round your answer to 1 decimal place.

Answers

The potential energy of two charges 3.6 millicoulombs and 2.5 millicoulombs separated by a distance of 10 meters is 0.0015 J, when rounded to one decimal place.

The potential energy of two charges 3.6 millicoulombs and 2.5 millicoulombs separated by a distance of 10 meters can be calculated using the formula for electrostatic potential energy: U = (1/4πε₀)q₁q₂/r, where q₁ and q₂ are the charges, and r is the distance between them.

In this case, U = (1/4πε₀) (3.6 x 10⁻⁶ C) (2.5 x 10⁻⁶ C) / (10 m). Calculating this yields a potential energy of 0.0015 J.

This potential energy is a result of the electric field that exists between two charges, and is due to the force of attraction or repulsion between them. This electrostatic potential energy can be used to do work, and can be converted into other forms of energy, such as kinetic energy.

Know more about potential energy here

https://brainly.com/question/24284560#

#SPJ11

predict the direction of the magnet field at different locations around a bar magnet and an electromagnet.

Answers

Hi! The direction of the magnetic field at different locations around a bar magnet and an electromagnet can be predicted using the following principles:

For a bar magnet, the magnetic field lines emerge from the North pole and enter the South pole. So, at locations near the North Pole, the magnetic field direction is away from the magnet, while near the South pole, it's towards the magnet. On the sides of the bar magnet, the magnetic field lines curve from North to South.

For an electromagnet, the magnetic field direction depends on the direction of the current flowing through the coil. You can use the right-hand rule to predict the direction of the magnetic field: point your thumb in the direction of the conventional current (positive to negative), and your fingers will curl around the coil in the direction of the magnetic field lines.

So, at different locations around an electromagnet, the magnetic field direction will follow the circular path of the coil, with the field lines emerging from the North pole and entering the South pole, similar to a bar magnet.

https://brainly.com/question/31485859

#SPJ11

write an analytic expression for the total linear momentum of the system of the two cars (mass m1 and m2), with velocities v1 and v2.

Answers

The analytic expression for the total linear momentum of the system of two cars with masses [tex]m_1[/tex] and m2[tex]m_2[/tex], and velocities [tex]v_1[/tex] and [tex]v_2[/tex], is [tex]P_{total} = m_1v_1 + m_2v_2[/tex].

To write an analytic expression for the total linear momentum of the system of two cars with masses [tex]m_1[/tex] and [tex]m_2[/tex], and velocities [tex]v_1[/tex] and [tex]v_2[/tex], follow these steps:

Step 1: Understand the concept of linear momentum. Linear momentum (p) is defined as the product of an object's mass (m) and its velocity (v). Mathematically, it is expressed as [tex]p=mv[/tex].

Step 2: Identify the linear momentum of each car. For car 1, with mass [tex]m_1[/tex] and velocity [tex]v_1[/tex], the linear momentum is [tex]p_1=m_1v_1[/tex]. Similarly, for car 2, with mass [tex]m_2[/tex] and velocity [tex]v_2[/tex], the linear momentum is [tex]p_2=m_2v_2[/tex].

Step 3: Calculate the total linear momentum of the system. To find the total linear momentum, add the linear momentum of both cars: [tex]P_{total} = p_1 + p_2[/tex].

Step 4: Substitute the expressions for [tex]p_1[/tex] and [tex]p_2[/tex] from Step 2 into the equation from Step 3. The result is [tex]P_{total} = m_1v_1 + m_2v_2[/tex].

In conclusion, the analytic expression for the total linear momentum of the system of two cars with masses [tex]m_1[/tex] and [tex]m_2[/tex], and velocities [tex]v_1[/tex] and [tex]v_2[/tex], is  [tex]P_{total} = m_1v_1 + m_2v_2[/tex].

To know more about linear momentum refer here:

https://brainly.com/question/31138302#

#SPJ11

why is th diameter of a silver 108 is approximately three times that of the diameter of a nucleus of helium

Answers

The difference in size between a silver-108 atom and a helium nucleus is due to the fact that the atomic radius of the silver-108 atom is much larger than the diameter of the helium nucleus.

What is Nulceus?

The nucleus is positively charged because of the presence of protons, while neutrons have no charge. The number of protons in an atom's nucleus is called its atomic number and determines the element to which it belongs. The sum of the protons and neutrons in the nucleus is called the mass number.

Silver-108 has an atomic number of 47, which means it has 47 protons in its nucleus, along with 61 neutrons. The electrons of the silver atom are distributed around the nucleus in different energy levels or orbitals.

Learn more about Nulceus from the given link

https://brainly.com/question/5223117

#SPJ1

find the rest energy, in terajoules, of a 16.516.5 g piece of chocolate. 1 tj1 tj is equal to 1012 j1012 j .

Answers

Answer:

1485 TJ

Explanation:

Given that

m = (16.5*10^-3) kg

c = 3*10^8 m/s

E = mc^2

E = (16.5*10^-3 kg) * (3*10^8 m/s)^2

E = 1.485*10^15 J

To express in Terajoules

E = (1.485*10^15)/(1*10^12)

E = 1485 TJ

(a) Compute the concentration of holes and electrons in an intrinsic sample of Si at room temperature. You may take me = 0.7m and mh = m. (b) Determine the position of the Fermi level under these conditions.

Answers

(a) The concentration of holes and electrons in an intrinsic sample of Si at room temperature can be computed using the intrinsic carrier concentration formula:

ni² = (Nv)(Nc)e^(-Eg/kT)

where ni is the intrinsic carrier concentration, Nv is the effective density of states in the valence band, Nc is the effective density of states in the conduction band, Eg is the band gap energy, k is the Boltzmann constant, and T is the temperature in Kelvin.

For Si at room temperature (T = 300K), Nv = 1.04x10^19 cm^-3, Nc = 2.81x10^19 cm^-3, and Eg = 1.12 eV. Substituting these values and solving for ni, we get:

ni = sqrt[(Nv)(Nc)e^(-Eg/kT)] = 1.5x10^10 cm^-3

Since Si is an intrinsic semiconductor, the concentration of electrons and holes are equal and are given by:

n = p = ni = 1.5x10^10 cm^-3

(b) The position of the Fermi level under these conditions can be determined using the relationship between the Fermi level and the carrier concentrations:

n = Ncexp[(Ef - Ec)/kT] and p = Nvexp[(Ev - Ef)/kT]

where Ef is the Fermi level energy, Ec and Ev are the energies of the conduction and valence bands, respectively.

Since n = p = ni, we can write:

ni² = NcNvexp[-Eg/kT] = Ne^(-Ef/kT)

where Ne is the total number of electrons in the conduction band.

Solving for Ef, we get:

Ef = Ec + (kT/2)ln(Nv/Nc) = Ev - (kT/2)ln(Nv/Nc) = 0.57 eV

Therefore, the position of the Fermi level in an intrinsic sample of Si at room temperature is 0.57 eV.

Learn more about intrinsic semiconductor here:

https://brainly.com/question/15184439

#SPJ11

the air pressure in the tires of a 980-kgkg car is 3.4×105n/m23.4×105n/m2.

Answers

The air pressure in the tires of a 980-kg car is 3.4×105 N/m2. It is important to maintain proper air pressure in car tires as it affects the handling, performance, and fuel efficiency of the vehicle.

The force that the Earth's atmosphere applies to the ground below is known as air pressure, commonly referred to as atmospheric pressure. The air molecules' gravitational attraction towards the Earth is what generates this pressure. The air pressure and density are increased due to the compression of the air molecules nearest to the Earth's surface. A barometer is often used to measure air pressure since it measures the force the atmosphere exerts on a unit of surface area. The pascal (Pa) is the accepted unit of measurement for air pressure, however millibars (mb) and inches of mercury (inHg) are also frequently used.

Learn  more about air pressure here:

https://brainly.com/question/13081874

#SPJ11

a person slaps her leg with her hand, bringing her hand to rest in 240 ms from an initial speed of 3.85 m/s. (a) What is the average force exerted on the leg, taking the effective mass of the hand and forearm to be 1.50 kg? (b) Would the force be any different if the woman clapped her hands together at the same speed and brought them to rest in the same time? Explain why or why not.

Answers

(a) To find the average force exerted on the person's leg, we first need to calculate the acceleration of the hand and forearm. Using the equation vf = vi + at,

where vf is the final velocity (0 m/s, as the hand comes to rest),

vi is the initial speed (3.85 m/s), a is the acceleration,

and t is the time (240 ms or 0.24 s):

0 = 3.85 + a * 0.24

Solving for a, we get:

a = -3.85 / 0.24 ≈ -16.04 m/s²

Now, we can use Newton's second law (F = ma) to find the average force exerted on the leg, where F is the force, m is the mass (1.50 kg), and a is the acceleration (-16.04 m/s²):

F = 1.50 * -16.04 ≈ -24.06 N

The average force exerted on the leg is approximately -24.06 N (negative because it's in the opposite direction of the initial speed).

(b) If the woman clapped her hands together at the same speed and brought them to rest in the same time, the force would be the same. This is because the mass and the change in velocity are the same, leading to the same acceleration and, consequently, the same force. The only difference would be that the force would be exerted on the opposite hand rather than the leg.

Learn more about Newton's second law here:

https://brainly.com/question/13447525

#SPJ11

(a) To find the average force exerted on the person's leg, we first need to calculate the acceleration of the hand and forearm. Using the equation vf = vi + at,

where vf is the final velocity (0 m/s, as the hand comes to rest),

vi is the initial speed (3.85 m/s), a is the acceleration,

and t is the time (240 ms or 0.24 s):

0 = 3.85 + a * 0.24

Solving for a, we get:

a = -3.85 / 0.24 ≈ -16.04 m/s²

Now, we can use Newton's second law (F = ma) to find the average force exerted on the leg, where F is the force, m is the mass (1.50 kg), and a is the acceleration (-16.04 m/s²):

F = 1.50 * -16.04 ≈ -24.06 N

The average force exerted on the leg is approximately -24.06 N (negative because it's in the opposite direction of the initial speed).

(b) If the woman clapped her hands together at the same speed and brought them to rest in the same time, the force would be the same. This is because the mass and the change in velocity are the same, leading to the same acceleration and, consequently, the same force. The only difference would be that the force would be exerted on the opposite hand rather than the leg.

Learn more about Newton's second law here:

https://brainly.com/question/13447525

#SPJ11

Find the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º

Answers

the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º is approximately 6.18 x 10^-7 m.

To find the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º, we can use the equation:

d*sinθ = mλ

Where d is the distance between the two slits, θ is the angle of the first minimum (41.0º), m is the order of the minimum (in this case, m = 1), and λ is the wavelength of the violet light (405 nm = 405 x 10^-9 m).

Rearranging the equation to solve for d, we get:

d = mλ/sinθ

Plugging in the values, we get:

d = (1 * 405 x 10^-9 m) / sin(41.0º)

Using a calculator, we can evaluate sin(41.0º) to be 0.6561, so:

d = (1 * 405 x 10^-9 m) / 0.6561

d ≈ 6.18 x 10^-7 m

Therefore, the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º is approximately 6.18 x 10^-7 m.

Learn more about the distance at  brainly.com/question/15172156

#SPJ11

Part D A diverging lens has a focal length of magnitude 13 cm At what object distance will the magnification be +0.80? Express your answer with the appropriate units. OTH HÅR O ? Value Units Submit Request Answer

Answers

The object distance at which the magnification will be +0.80 for a diverging lens with a focal length of magnitude 13 cm is:

do = -21.67 cm

To solve this problem, we can use the formula for magnification:

m = -di/do

Where m is the magnification, di is the image distance, and do is the object distance.

We are given that the focal length of the lens, f, is 13 cm. For a diverging lens, the focal length is negative, so we can write:

f = -13 cm

We are also given that the magnification, m, is +0.80. Substituting these values into the formula above, we get:

0.80 = -di/do

Solving for di, we get:

di = -0.80do

Now we can use the lens equation to relate do and di:

1/do + 1/di = 1/f

Substituting the values we know, we get:

1/do + 1/(-0.80do) = 1/(-13 cm)

Simplifying and solving for do, we get:

do = -21.67 cm

However, we need to express our answer with the appropriate units, which are centimeters. Therefore, the object distance at which the magnification will be +0.80 for a diverging lens with a focal length of magnitude 13 cm is:

do = -21.67 cm

(Note that the negative sign indicates that the object is on the opposite side of the lens from the observer, which is consistent with the fact that we are dealing with a diverging lens)

For more information on lens and their focal length refer to https://brainly.com/question/25779311

#SPJ11

Within a star like the Sun, there are several forces at work. Classify the following forces as directed outward or directed inward. Not all items will be used
Directed outward
Directed inward
Answer Bank:
thermal pressure, gravitational force, systematic electrical force

Answers

The Directed outward is thermal pressure and the Directed inward is the gravitational force, and systematic electrical force.

Is the sun an outside force?

The sun's attraction is the external force acting on both the earth and the moon, but gravity causes the gravitational attraction of the earth and moon.

What is the solar outward force?

Pressure generates an outward force within the Sun, from the high-pressure core to the low-pressure surface. In contrast, gravity creates an inward force. A system is said to be in hydrostatic equilibrium when the force due to pressure exactly balances the force due to gravity.

What opposing inward and outward forces exist within a star?

Any main sequence star can be described as a dense gas/fluid in hydrostatic equilibrium. Gravity is balanced by the outward-acting forces of gas pressure and radiation pressure.

To know more about the Directed outward visit:

https://brainly.com/question/27561491

#SPJ1

determine the moment of inertia ixx of the sphere in appendix a ex- pressed in terms of its total mass, m. the material has a constant density rho and a uniform mass distribution.

Answers

The moment of inertia (Ixx) of the sphere in Appendix A expressed in terms of its total mass (m), with constant density (rho) and uniform mass distribution, is

  Ixx = (8/15) * pi * r^5 * rho

To determine the moment of inertia (Ixx) of the sphere in Appendix A expressed in terms of its total mass (m), we will consider the sphere's constant density (rho) and uniform mass distribution. Here's a step-by-step explanation:

1. First, let's find the mass of the sphere. Mass (m) can be calculated using the formula:
  m = (4/3) * pi * r^3 * rho
  where r is the radius of the sphere.

2. Now, let's calculate the moment of inertia (Ixx) of the sphere. For a solid sphere, the moment of inertia along any axis passing through its center can be expressed as:
  Ixx = (2/5) * m * r^2

3. We want to express Ixx in terms of the total mass (m). To do this, we can substitute the mass equation from step 1 into the moment of inertia equation from step 2:
  Ixx = (2/5) * [(4/3) * pi * r^3 * rho] * r^2

4. Finally, simplify the equation:
  Ixx = (8/15) * pi * r^5 * rho

So, the moment of inertia (Ixx) of the sphere in Appendix A expressed in terms of its total mass (m), with constant density (rho) and uniform mass distribution, is:
Ixx = (8/15) * pi * r^5 * rho

For more information on inertia, mass and density refer to https://brainly.com/question/1140505

#SPJ11

A supernova is
A. a giant explosion caused by the iron core a star collapsing
B. a giant explosion which happens when a white dwarf exceeds 1.44 solar masses
C. the birth of a star
D. Both A and B
E. None of the above

Answers

Answer: D. Both A and B

Explanation: A supernova is a giant explosion caused by the iron core of a star collapsing. A supernova is also a giant explosion which happens when a white dwarf exceeds 1.44 solar masses.

A supernova obviously is not the birth of the star.

Other Questions
9999999999999999999999999999999999999999956596859873 -57854909049287634246299583729875472656475965593947699= ____________________________________________________________________98899876788877656687989/988998-*995895966++5966656566666666655555555555958545156548448489+4964898748/798784484878554659757564250216407694722= Word search U.S Landscapes if the u.s. aggregate price level falls: a) the purchasing power of wealth declines. b) net exports rise. c) interest rates go up. d) the aggregate demand curve shifts to the right. A cellular reaction with a AG of 8.5 kcal/mol could be effectively coupled to the hydrolysis of a single molecule of ATP (AG of-7.3 kcal/mol). True or False On the addition of 6M HCl, the solution remained colorless and no bubbles were observed.When 0.1M BaCl2 was added to the acidified unknown, awhite precipitate was formed.When 0.1 M AgNO3 was added to the unknown, a white precipitate was formed.When 1 M Na2C2O4 was added, a white precipitate formed.On the basis of the test results,which ions are likely present in the unknown? assume you assign the color 'red' to the first variable selected in part b. show the steps involved in checking the remaining legal values for all other variables using arc consistency. What is the informal trading sector Select the most appropriate trade pact for each description 1. United States President Donald Trump believes that this agreement does not benefit all members equally. He has threatened to pull the United States out if more favorable terms are not reached Click to selecti 2. This group signed a free trade agreement with China that removes tarifs on 90% of traded goods. Foto selectD 3. In 2016 Venezuela was suspended for violating this pact's democratic principles and engaging in widespread human rights violations Foto select 4. Recession troubles in 1998 led to greater downfall of this agreement. 5. Customs Union Falck to select D 6. Council of Ministers is composed of government ministers from each member. Fick to select 7. There has been limited progress to foster free trade under this agreement Click to select 8. Includes France and Germany fick to selectD 9. Opposition to this agreement believed there would be a mass exodus of jobs from the United States and Canada into Mexico Rick to select) 10. A signed agreement in 1969 was based on the EU model Foto select MERCOSUR Andean Community EU ASEAN NAFTA c function to take a string parameter given to it and print itIn the process of learning C... trying to create a function for some test cases; I want something that prints out the name of each test case taken from input. Just wanted to eliminate some dup code in each test case which is `printf("Testing foo); etc. Have a function which would be called like this: outTesting("foo"); Pretty basic, but I'm unfamiliar with some of these data structures; help is appreciated. Here's what I have so far: write a function file that takes in t as a vector, k as a scale and eq as the equation number (1,2, or 3) Financial accounting's primary purpose is to communicate financial information and performance to all of the following external users, except: stockholders. patients. the government. insurers. please write a minimum of 5 sentences explaining why this piece of writing provided supports the new deal. evaluate d(xyy2)da if d is the region bounded by the x-axis and the lines x=1,y=1, and y=x. 1-What options are available when it comes to selecting a degree to prepare for a career in journalism?2-Why is the willingness to take feedback and criticism an important trait for future journalists?3-Why is a portfolio an important piece of your job search?4-How does the role of a public relations specialist differ from other journalism positions?5-Why could specializing in a niche be beneficial in journalism? Required information Skip to question [The following information applies to the questions displayed below.] A company like Golf USA that sells golf-related inventory typically will have inventory items such as golf clothing and golf equipment. As technology advances the design and performance of the next generation of drivers, the older models become less marketable and therefore decline in value. Suppose that in the current year, Ping (a manufacturer of golf clubs) introduces the MegaDriver II, the new and improved version of the MegaDriver. Below are year-end amounts related to Golf USAs inventory. Inventory Quantity Unit Cost Unit NRV Shirts 29 $60 $64 MegaDriver 14 300 200 MegaDriver II 24 330 360 3. Record any necessary adjusting entry to inventory. (If no entry is required for a transaction/event, select "No Journal Entry Required" in the first account field.) A poll of 1,100 voters in one district showed that 49% of them would favor stricter gun control laws. Find the 95% confidence interval for the population proportion favoring stricter gun control laws. Round to four decimal places. which form of purchasing is used by organizations that want to centralize the procurement process? group of answer choices enterprise level model cross plant model plant specific model decentralized model Which of these is a current trend that helps employees with career development?A. Externship programsB. Flex-time to attend schoolC. Better benefit packagesD. Piece-rate payE. Support for lifetime learning I"LL MARK YOU BRAINLIST!!!!!!!!PLS HELP ME!!!!!!!!!! a thin 14-cm-long solenoid has a total of 470 turns of wire and carries a current of 2.4 A.calculate the field inside the solenoid near the center.