Can someone help me here

Currently, the information is as follows: weight (lb) (lb) mother/1000 empty weight 74.9 pound-inches.

In the International System of Units (SI), the newton is used as the unit of measurement for force, which is used to quantify weight. On the surface of the Earth, a one kilogram object weighs around 9.8 newtons, but the weight of the same thing on the Moon is only about one-sixth as great.

All things near Earth are constantly under the influence of weight. All things are subject to the gravitational attraction of the Earth, which pushes them all toward its core.

To know more about Weight visit:

https://brainly.com/question/29254543

#SPJ4

The initial  velocity of the car is 39.6 m/s and the final velocity is zero. Then, the acceleration of the car is - 9.9 m/s². The average distance covered is 158.4 m.

The acceleration of a moving body is the rate of change in its velocity. Acceleration is a vector quantity and is characterized with a magnitude and direction.

Acceleration is the ratio of change in velocity to the change in time. Here, the initial velocity is 39.6 m/s. The car is stopping , therefore the final  velocity is zero.

The time taken to stop is 4 seconds. Hence, the acceleration is :

a = 0 - 39.6 m/s / 4 s

   = -  9.9 m/s²

The distance covered within this time is the product of its velocity and time.

Distance  = velocity × time  = 4 s × 39.6 m/s = 158.4 m

Therefore, the car travels up to a distance of 158.4 m before stops.

To find more on acceleration, refer here:

https://brainly.com/question/2303856

#SPJ1

Your question is incomplete. But your complete question probably was:

Suppose a driver is moving with speed 39.6 m/s, and slams on the brakes, stopping the car in 4. s.

the acceleration and

(b) the distance the car travels while braking, assuming the acceleration is constant.

The frequency of 3.84 x 10^14 Hz corresponds to a color in the blue-violet range of the visible spectrum. So, the color of the light emitted by the rubidium atom is blue-violet.

The frequency of light determines its position in the electromagnetic spectrum, which includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. The frequency of light that is visible to the human eye is in the range of approximately 400-700 nanometers (nm). This corresponds to a frequency range of approximately 7.5 x 10^14 Hz to 4.3 x 10^14 Hz.

The frequency of light emitted by the rubidium atom, 3.84 x 10^14 Hz, is within this range, so it is in the visible spectrum. To determine the color of the light, you can use the relationship between the frequency of light and its corresponding color. The colors of the visible spectrum, from lowest frequency to highest, are red, orange, yellow, green, blue, indigo, and violet.

To know more about frequency

https://brainly.com/question/5102661

#SPJ4

The pulleys can be attached in such a way that the force required to lift the object will be less, and the direction of the pulley can be shifted systematically.

In the body, force is the result of either a push or a pull. The three main categories of forces are friction, nuclear, and gravitational. For instance, when a hand strikes a wall, the hand puts force on the wall and the wall also exerts a force on the hand. Newton was given a variety of laws to help him understand force.

We can move objects much more easily because of simple machinery called pulleys that can shift the direction of the force. When we employ many pulleys together, they also boost mechanical advantage. By using this method, less force is needed to raise an object.

To know more about Force:

https://brainly.com/question/13191643

#SPJ4

Therefore, only half of the wave fits since it is evenly divided and a whole crest fits on the string; the longest wavelength standing-wave pattern which can fit on this guitar has a wavelength of 1 = 120 cm.

The distance of two wave crests is known as the wavelength, and it also applies to troughs. The amount of vibrations that travel across a certain area in one second is measured in cycles each second, or frequency.

The wavelength is calculated by calculating the distance between two identical positions on adjacent waves. The distance of one compressive to the next or from one conformational to the subsequent is measured in order to calculate the wavelength of such a longitudinal wave.

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ4

Answer:

B

Explanation:

W = f * d

   = mg * d

   = 40(9.81)(10) =~4000 J

Capacitance is a direct issue with alternating current. The amount of power that may be sent across a line and the minimum distance between lines are both constrained by capacitance between parallel lines.

When charged electrons (current) are forced through a conducting loop by the pressure of an electrical circuit's power source, they may perform tasks like lighting a lamp. In a nutshell, voltage equals pressure and is expressed in volts (V).

The difference in electrical energy between two circuit components is known as voltage. It is measured in volts and is measurable with a voltmeter. The current increases as the voltage grows. Higher electrical voltage and current are required for large electrical appliances.

To know more about Voltage visit:

https://brainly.com/question/13521443

#SPJ4

Answer:

Option (C)

Explanation:

All electric machines are not ideal, therefore they have some losses due to which efficiency being less than 100%.

Enthalpy Changes the overall energy change in the substance portrayed in the graph at  48°C.

Mass (m) = 0.3 Kg

Initial temperature (T1) = 20°C

Heat (Q) added = 35 KJ

Specific heat capacity (C) = 4.18 KJ/Kg°C

Final temperature (T2)

The final temperature of water can be obtained as follow:

Q = MC(T2 – T1)

35 = 0.3 x 4.18 (T2 – 20)

35 = 1.254 (T2 – 20)

Clear the bracket

35 = 1.254T2 – 25.08

Collect like terms

1254T2 = 35 + 25.08

1.254T2 = 60.08

Divide both side by the coefficient of T2 i.e 1.254

T2 = 60.08/1.254

T2 = 47.9 ≈ 48°C

Therefore, the final temperature of the water is 48°C.

Learn more about temperature on:

https://brainly.com/question/11464844

#SPJ1

The average maximum height will be 103.7m.

A projectile is defined as an object that has an initial velocity and follows a path that dependent on the gravitational acceleration.

The gravitational force initially will act on the opposite direction until it reach the maximum height, and right after that, the gravitational force will accelerate the speed of the projectile.

The formular used will be;

[tex]H = \frac{1}{2} gt^{2}[/tex]

In this case, the initial velocity u = 0;

where g = 9.8m/s2

t = 4.6s

[tex]H = \frac{1}{2} (9.8)(4.6)^{2}[/tex]

H = 4.9 x 21.16

H = 103.7m.

Learn more on projectile here:https://brainly.com/question/8104921

#SPJ1

The key idea is that time and power are inversely related to each other for a given quantity of work. A more powerful engine should be able to complete the same amount of work faster, according to the power equation.

The rate of doing work is known as power. It is the same as the amount of energy used up in a given amount of time. The joule per second (J/s), or SI system, is the unit of power.

Work may be positive or negative; if it has a component in the same direction as the object's displacement, it is positive work.

To know more about work visit:-

https://brainly.com/question/19382352

#SPJ4

Answer:

180 J is the answer to how much work is done when a mass of 3kg is lifted vertically through 6 m

To calculate the amount of work done when a mass is lifted vertically through a certain distance, we can use the formula:

Work = Force * Distance

In this case, the mass is 3kg, which weighs 30N, and it is lifted vertically through a distance of 6m. Plugging these values into the formula, we get:

Work = 30N * 6m

= 180 Joules

Therefore, the amount of work done when the mass is lifted vertically through 6m is 180 Joules.

To learn more about work done,

https://brainly.com/question/21854305

https://brainly.in/question/5499258

Answer:

False

Explanation:

This can be proved through the simple force formula, [tex]\displaystyle{\sum \vec F = m\vec a }[/tex]. [tex]\displaystyle{\sum \vec F}[/tex] stands for net force, m is mass and [tex]\displaystyle{\vec a}[/tex] is acceleration.

As you see, force is equal to mass times acceleration. If we substitute mass = 9.0 kg and acceleration = 3 m/s² then we will have:

[tex]\displaystyle{\sum \vec F = 9.0 \, \text{kg} \, \times \, 3 \, \text{m/s}^2}[/tex]

This will result:

[tex]\displaystyle{\sum \vec F = 27 \, \text{kg}\cdot \text{m/s}^2}\\\\\displaystyle{\sum \vec F = 27\, N}[/tex]

Therefore, the force acting on the object should equal 27 N, not 3 N.

If there is an unexpected monetary contraction that shifts aggregate demand from AD1 to AD3, starting from long-run equilibrium at A with output equal to and the price level equal to P1, then the short-run non neutrality of money is represented by the movement from option A: point A to point B.

At point A, the economy is in long-run equilibrium, with output equal to and the price level equal to P1. The unexpected monetary contraction shifts aggregate demand from AD1 to AD3, which reduces the demand for goods and services in the economy.

This reduction in demand causes a decrease in the price level and a decrease in output. As a result, the economy moves from point A to point B on the AD-AS curve, where output is lower and the price level is lower.

Therefore, This movement represents the short-run non neutrality of money, as the unexpected monetary contraction has caused a change in both output and the price level in the short run.

Learn more about long-run equilibrium from

https://brainly.com/question/6275304

#SPJ1

See full question below

3. (Exhibit: AD–AS Shifts) Starting from long-run equilibrium at A with output equal to Y

and the price level equal to P1, if there is an unexpected monetary contraction that shifts

aggregate demand from AD1 to AD3, then the long-run neutrality of money is

represented by the movement from:

A) A to B.

B) A to G.

C) A to C.

D) A to D.

Her average rotational acceleration is equal to the board's average external torque over her, which is Nm234.16 Nm, or 28.18 rad/s.

An object rotating experiences a change of angular velocity per unit of time, which is quantified as angular acceleration (also known as rotational acceleration). It is a vector quantity that has two strongly outlined directions or senses and a magnitude component.

Given: Initial angular speed w, = 0 rad; Initial and final angular speeds cf, = 6–20 rad/s lime

Rotational inerlia I (= 12 leg m° at time t = 220 x163 5 Rotational angulas acceleration wU = wo tat 6.20 = 0 + xx 220 x103 6.20 = = 0.02918 x10 220 x103 a = 28.18 rad/s -> Quality varies torque N= IX 12x28.18 234.16 Nm

To know more about angular acceleration  visit:

https://brainly.com/question/29428475

#SPJ4

The speed of the spring from its initial position is 0.8 m/s.

The speed of the spring after it descended from the given position is calculated by applying the principle of conservation of energy.

K.E = U

¹/₂mv² = ¹/₂kx²

mv² = kx²

v² = kx² / m

v = √ ( kx² / m )

where;

The speed of the spring after descending the given distance is calculated as;

v = √ ( 850 x 0.049² / 3.2 )

v = 0.8 m/s

Learn more about speed of spring here: https://brainly.com/question/20357978

#SPJ1

They travel a horizontal distance of 4.17 m from the exit point before hitting the water.

Energy cannot be created or destroyed, according to the law of conservation of energy. However, it is capable of change from one form to another.

height of the slid: h = 3.1 m

horizontal movement above swimming pool: s = 1.4 m

Let the horizonal speed of the people at the end of the  water slide= v

Using energy conservation

mgh = 1/2 mv²

v = √(2gh)

Again time taken for falling s = 1.4 m under gravitation:

t = √(2s/g)

Hence, the horizontal distance  travelled = speed × time

= √(2gh)×√(2s/g)

= √(4hs)

= √(4 × 3.1 × 1.4)

= 4.17 m.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ4

Option F, with the GRAVITY arrow pointing to the right, is the appropriate diagram. By means of gravity, a planet and other body pulls items toward its core.

Moons are subject to the gravitational pull of planets. So because near side of the moon is subjected to a stronger pull compared to the far side, it is drawn into a slightly expanded shape. The moon seems to have a comparable differential pull to the Earth that causes ocean tides.

The Moon's and Earth's gravitational pull caused this particular case of tidal locking (called synchronous rotation).

One orbit of Sun is completed by the Earth in 365 and one-quarter days, or one year. The Earth rotates around the Moon just like the Moon does around the Sun. The Moon's orbit will last 27 1/2 days.

To know more about gravity visit:

https://brainly.com/question/4014727

#SPJ4

A position established in relation to an object or set of objects is the center of mass. It represents the system's average location as weighted by each component's mass.

The center of mass for straightforward stiff objects with homogeneous density is found at the centroid. The location where the distribution of mass is constant in all directions called the center of mass.

speed of the gymnast = 2.80 m/s

using the second equation of motion,

s = u t + 1/2 a t ^2

the position at time, t = 0.100 sec

s = (2.80) (0.100) + 1/2 (-9.8 m/s^2) (0.100)^2

s = 0.231 m.

the position at time, t = 0.200 sec

s = 0.364 m.

the position at time, t = 0.300 sec

s = 0.399 m.

the position at time, t = 0.500 sec

s = 0.175 m.

to know more about center of mass please visit.

https://brainly.com/question/28996108

#SPJ4

(a) The reading when the elevator is moving upward with a constant speed of 9.0 m/s is 40 N.

(b) The reading when the elevator is moving upward with a speed of 9.0 m/s while decelerating at a rate of 1.1 m/s² is 35.11 N.

What is acceleration?

The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. In vector quantities, accelerations exist (in that they have magnitude and direction).

The direction of the net force that is acting on an object determines its acceleration.

According to the given question:

Balance force ( W ) = 40 N

a)  moving upward with constant velocity (V ) = 9 m/s.

The reading will not change since it is moving with constant velocity

W = 40 N

b) Moving upward with V = 9 m/s and decelerating at the rate of

(a ) = 1.1 m /s²

The net force ( F ) = W - ma

where m = W/g = 40/9 = 4.45 kg

F = 40 - 4.45 * 1.1 = 35.11 N

Learn more about acceleration

brainly.com/question/460763

#SPJ4

''If a football quarterback runs into and tackles another player by grabbing onto them'' is Elastic collision. A closed system is a rolling oil drum across a smooth, frictionless marble floor.

Learn more about Elastic collision refer to :

https://brainly.com/question/12644900

#SPJ1

The average temperature of London is warmer than that of Calgary in December as the oceanic currents warm the atmosphere in London.

Gravity, wind, and water density are what cause ocean currents, which are the continuous, predictable, directed movement of seawater. There are two directions in which ocean water can move: horizontally and vertically. Vertical shifts are referred to as upwellings or downwellings, while horizontal motions are known as currents.

Long-distance ocean currents combine to form the global conveyor belt, which is a major factor in determining the climate in many parts of the world. Ocean currents specifically affect the temperature of the areas they pass through.

To know more about temperature:

https://brainly.com/question/15236370

#SPJ4

Answer:

1) the potential difference is the same for both resistors

2) the larger resistor must carry less current because of (1)

3) the potential difference is the same for both resistors - given (everything depends on this fact)

The maximum theoretical efficiency of this power plant is 7.9

A power plant , also referred to as a generating station or generating plant, is described as an industrial facility for the generation of electric power. Power plants are generally connected to an electrical grid.

The cold temperature =

5°C = 278K

Hot temperature =

28 ° = 273 + 28 K

28° = 303 K

n(efficiency) = 1- Tc/ Th

n(efficiency) = 1- 278/301

n(efficiency) = 1- 0.9175

(efficiency) = 0.082 x 100

n(efficiency) = 8.2 %

Learn more about power plant at: https://brainly.com/question/28349738

#SPJ1

Complete question =

An experimental power plant at the Natural Energy Laboratory of Hawaii generates electricity from the temperature gradient of the ocean. The surface and deep-water temperatures are 28 ∘C and 5 ∘C, respectively. What is the maximum theoretical efficiency of this power plant?

A satellite of mass mis orbiting Earth in a stable circular orbit of radius R, (a) Speed of satellite is v = sqrt(G x Mg/R). (b) total mechanical energy is E = KE + PE. (c)  the period of the satellite as orbit is T = 2 x pi x sqrt(R^3 / (G x Mg)).

(a) The speed of the satellite in its orbit can be derived using Kepler's second law of planetary motion, which states that a planet or satellite's orbital speed is inversely proportional to the square root of the distance from the center of the planet or satellite to the center of the primary body. This can be expressed mathematically as:

v = sqrt(G x Mg / R)

where v is the orbital speed of the satellite, G is the gravitational constant, Mg is the mass of Earth, and R is the radius of the satellite's orbit.

(b) The total mechanical energy of the satellite-Earth system in its orbit can be calculated using the formula for kinetic energy and the formula for gravitational potential energy. The kinetic energy of the satellite is given by:-

= KE

= 1/2 x m x v^2

The satellite's gravitational P.E. determined by:

= PE

= -G x Mg x m / R

The total mechanical energy of the satellite-Earth system is the sum of the kinetic energy and gravitational potential energy, so:

= E

= KE + PE

= 1/2 x m x v^2 - G x Mg x m / R

(c) The period of the satellite's orbit is the time it takes for the satellite to complete one full orbit around Earth. This can be calculated using the formula:-

= T

= 2 x pi x sqrt (R^3 / (G x Mg))

where T is the period of the orbit, G is the gravitational constant, Mg is the mass of Earth, and R is the radius of the satellite's orbit.

(d) If the new satellite has twice the mass of the original satellite, then its kinetic energy will be four times greater, since KE is proportional to m. However, the gravitational potential energy of the new satellite will also be four times greater, since PE is proportional to m. Since the total mechanical energy of the satellite-Earth system is the sum of the kinetic and gravitational potential energy, the total mechanical energy of the new satellite-Earth system will be the same as the total mechanical energy of the original satellite-Earth system. Therefore, the new satellite's orbital speed will be the same as the original satellite's orbital speed.

To know more about energy please refer: https://brainly.com/question/18370942

#SPJ4

The magnitude of the magnetic field at the point of the proton moving in the negative direction is equal to  18.39 × 10⁻¹⁵ T.

The magnetic force direction that is experienced by the proton moving in the negative direction is equal to  4.71 x 10⁻²⁸ N.

The magnitude of the magnetic field at distance 'r' at the point of the proton moving in the negative direction is determined as follows;

F = qvB = (kq²)/r²

qvB = kq²/r²

B = kq/vr²

where, k is the coulomb's constant, r is the distance between the protons, q is the magnitude of the charge of the protons, and v is the speed of the proton.

Given the charge n the proton, q = 1.602 x 10⁻¹⁹C

The speed of the proton, v = 1.6 x 10⁵ m/s

B = (9 x 10⁹ x 1.602 x 10⁻¹⁹) / (1.6 x 10⁵ m/s x 0.7 x 0.7)

B = 18.39 × 10⁻¹⁵ T

The magnetic force experienced by the proton in the negative direction is calculated as follows;

F = qvB

F = 1.602 x 10⁻¹⁹ x 1.6 x  10⁵ x 18.39 × 10⁻¹⁵ T

F = 47.1 x 10⁻²⁹ N

F = 4.71 x 10⁻²⁸ N

Learn more about magnetic force, here:

brainly.com/question/13277365

#SPJ1

When the leg it is in has the least resistance, the lightbulb may glow brightest. Because inductive capacitance is inversely proportional to angular frequency, this occurs at low frequencies.

Electrons moving through a conductors, for example a metal wire, create an electric current. The ions inside the metal may be struck by the speeding electrons. Resistance results this from, making it harder for the current to flow.

To better understand resistance, imagine how difficult it would be for a person to move from one shop to the next in a crowded market. This circumstance is undoubtedly comparable to an atom trying to get through a wire.

To know more about resistance visit;

https://brainly.com/question/29427458

#SPJ4

The particles inside the ball are vibrating about a fixed position at the start of the experiment.

When the ball is heated using a Bunsen burner, it no more passes through the ring because the particles have increased kinetic energy, hence, they are able to vibrate across a larger space and more frequently, resulting in an increase in volume of the ball.

Radiation is a process of heat transfer that occurs through space and thus does not require an intervening material medium for heat transfer.

When heat energy is added to a substance, some of the observable effects include:

Heat is transferred through two main processes; conduction, convection, and radiation.

When an object is heated, the particles acquire kinetic energy and collide faster resulting in an increase in temperature as well as volume of the object.

Thisbis observed in the ball and ring experiment.

Learn more about the effects of heat at: https://brainly.com/question/20711055

#SPJ1