can you classify matter based on chemical properties

The only force opposing the block's sliding as it slows down is friction with magnitude f . By Newton's second law, the net force in this direction is

∑ F = -f = ma = (4.00 kg) a

Assuming constant acceleration a , the acceleration applied by friction is such that

(1.5 m/s)² - (11 m/s)² = 2a (4.00 m)

Solve for the acceleration :

a = ((1.5 m/s)² - (11 m/s)²) / (8.00 m) ≈ -14.8 m/s²

Then the frictional force exerted a magnitude of

-f = (4.00 kg) (-14.8 m/s²)

f ≈ 59.4 N

and was directed opposite the block's motion.

The center of gravity of this two particle system is located 1/3 distance away from 2 m and on the line joining the two particles.

The given parameters:

The center of gravity of the two particles when first particle is fixed is calculated as;

[tex]C_G = \frac{m(0 ) \ +2m(L) }{m+ 2m} \\\\C_G = \frac{2mL}{3m} \\\\C_G = \frac{2L}{3}[/tex]

The center of gravity of the two particles when second particle is fixed is calculated as;

[tex]C_G = \frac{m(L) \ + \ 2m(0)}{m + 2m} \\\\C_G = \frac{mL}{3m} \\\\C_G = \frac{L}{3}[/tex]

Thus, the center of gravity of this two particle system is located 1/3 distance away from 2 m and on the line joining the two particles.

Learn more about center of gravity here: https://brainly.com/question/874205

Answer:

180 LUV:)

Explanation:

The shutter speed that should be used if the lens is changed to f/4.0 is; Choice D: 1/500 s.

The relationship between the shutter speed and the focal ratio is an inverse relationship.

Ratio of Areas = 5.6²/4²

Since; T1A1 = T2A2

In essence; when the focal ratio is reduced as in this case; from f/5.6 to f/4.0; the shutter speed is increased.

Ultimately, the shutter speed of the camera in discuss increases to; 1/500 s.

Read more:

https://brainly.com/question/13083614

At the equilibrium position of the spring, the mass has kinetic energy

1/2 (1.00 kg) (0.0400 m/s)² = 0.000800 J = 0.800 mJ = 800 µJ

and when the spring is maximally compressed, this kinetic energy is converted into potential energy.

The maximum spring potential energy of the simple harmonic motion is approximately 7.48 millijoules.

To find the maximum spring potential energy (Us) in simple harmonic motion, we need to determine the maximum displacement (A) of the mass from its equilibrium position.

In simple harmonic motion, the maximum displacement is equal to the amplitude of the oscillation.

The formula for maximum displacement (A) is given by:

A = v0 / ω

where v0 is the initial velocity (4.00 cm/s) and ω is the angular frequency of the oscillation.

The angular frequency (ω) is given by:

ω =[tex]\sqrt{(k / m)[/tex]

where k is the spring constant (9.00 N/m) and m is the mass (1.00 kg).

Substitute the values:

ω = [tex]\sqrt{(9.00 N/m / 1.00 kg)} = \sqrt{9.00 rad/s[/tex] ≈ 3.00 rad/s

Now, calculate the maximum displacement:

A = 4.00 cm/s / 3.00 rad/s ≈ 1.33 cm

Next, calculate the maximum spring potential energy:

Us =[tex](1/2) * k * A^2[/tex]

Us = (1/2) * 9.00 N/m * [tex](1.33 cm)^2[/tex]≈ 7.48 mJ

To know more about spring potential energy, here

brainly.com/question/29510087

#SPJ2

--The compleete Question is,  A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then what is the maximum spring potential energy of the simple harmonic motion--

Following are the calculation to the friction force:

The substring tension force is provided as follows:  

[tex]\to T-m_{1}g=0 \\\\\to T = m_{1}g \\\\[/tex]

       [tex]= (68\ kg) (9.81 \ \frac{m}{s^2} ) (\frac{ 1\ N}{ 1\ kg \cdot \frac{m}{s^2}}) \\\\ = (68 ) (9.81 ) ( 1\ N) \\\\= 667.08\ N \\\\[/tex]

Therefore, the friction force on the box is "667 N".

Learn more:

brainly.com/question/2285391

Answer:

972 J

Explanation:

At the bottom, all the gravitational potential energy was converted into kinetic energy. If you calculate the GPE, its value will be the same that the KE at the bottom. The GPE can be calculated this way:

GPE = mass×gravity×heigth

GPE = 2.2×9.8×45.08 ≈ 972

The internal energy after heating in terms of U is 100U.

The given parameters;

Assuming a constant pressure, the internal energy of the ideal gas is equal to the change in the enthalpy of the ideal gas.

[tex]\Delta H = U \times \Delta T\\\\\Delta H = U (200 - 100)\\\\\Delta H = 100 U[/tex]

Thus, we can conclude that the internal energy after heating in terms of U is 100U.

Learn more here:https://brainly.com/question/15517750

Answer:

4653

4565445655687568677667876

Answer:

i think its D or B

Explanation:

i just think

On Earth,in atmosphere the hydrogen is found in the less quantity. Option C is correct.

The chemical element hydrogen has the atomic number 1 and the symbol H. The smallest element is hydrogen.

Hydrogen is found in large numbers on Earth in combination with other elements, such as water and hydrocarbons, yet it is only 0.00005 percent present in Earth's atmosphere.

On Earth,in atmosphere the hydrogen is found in the less quantity.

Option C is correct.

To learn more about the hydrogen refer:

https://brainly.com/question/11837837

#SPJ2

[tex]\\ \rm\rightarrowtail Avg\: velocity=\dfrac{Total\: Displacement }{Total\: time}[/tex]

[tex]\\ \rm\rightarrowtail Avg\: velocity=\dfrac{4}{2}=2m/s[/tex]

Answer: Even though the genetic susceptibility plays a crucial role on the IQ of the individual, various modifiable environmental factors like education, premature birth, nutrition, pollution, drug and alcohol abuse, mental illnesses, and diseases can have an influence on an individual's IQ.

Answer:

v=u+at

v= 10+100×10

v = 10+1000

v = 1010 m/s

The magnetic field in the gap is [tex]\mathbf{B = \dfrac{\mu_oI s}{2 \pi a^2}}[/tex]

In a circuit, a magnetic flux is circulated or followed via a confined environment or passage called a magnetic field gap. The narrow air gap is a non-magnetic component of a magnetic circuit that is normally connected to the remainder of the circuit magnetically in series. This enables a significant amount of magnetic flux to pass via the gap.

The magnetic field in the gap at a distance s < a can be computed by using the formula:

[tex]\mathbf{ \oint Bdl = \mu_oI_{enclosed}}[/tex]

where;

[tex]\mathbf{B( 2 \pi d) = \mu _o \oint _s J_d da }[/tex]

where;

[tex]\mathbf{B( 2 \pi d) = \mu _o J_d \oint _sda }[/tex]

[tex]\mathbf{B( 2 \pi d) = \mu _o J_d (\pi d^2) }[/tex]

Making the magnetic flux density the subject, we have:

[tex]\mathbf{B =\dfrac{ \mu _o J_d (\pi d^2) }{( 2 \pi d)}}[/tex]

[tex]\mathbf{B =\dfrac{ \mu _o J_dd}{ 2 }}[/tex]

Recall that, the drift current density [tex]\mathbf{J_d = \dfrac{I}{\pi a^2}}[/tex]

[tex]\mathbf{B = \dfrac{\mu_o d}{2}(\dfrac{I}{\pi a^2})}[/tex]

Recall that distance in question is said to be (s);

∴

[tex]\mathbf{B = \dfrac{\mu_oI s}{2 \pi a^2}}[/tex]

Learn more about the magnetic field here:

https://brainly.com/question/7802337

Explanation:

I think this is it, give it a try

We have that for the Question "(a) what multiple of the maximum charge is on the capacitor and (b) what multiple of the maximum current is in the inductor"  

Answer:

From the question we are told

In an oscillating LC circuit, when 86.6% of the total energy is stored in the inductor's magnetic field

A) When 86.6\% energy is stored in inductor

[tex]\%[/tex]of energy stored in electric field = [tex]1 - 0.866 = 13.4\%[/tex]

[tex]\frac{V_E}{V} = \frac{\frac{q^2}{2c}}{\frac{Q^2}{2c}} = 0.134\\\\\frac{q}{Q} = \sqrt0.134\\\\\frac{q}{Q} = 0.366\\\\q = 0.366Q_{max[/tex]

B)

[tex]\frac{V_B}{V} = \frac{\frac{Li^2}{2}}{\frac{LI^2}{2}} = 0.866\\\\\frac{i}{I} = \sqrt0.866\\\\\frac{i}{I} = 0.931\\\\i = 0.931I_{max[/tex]

For more information on this visit

https://brainly.com/question/23379286

The potential difference between the initial and final point is 3.0 V.

The given parameters:

The potential difference between the initial and final point is calculated as follows;

[tex]E = \frac{V}{d} \\\\\frac{V_1}{d_1} = \frac{V_2}{d_2}[/tex]

where:

[tex]d_2[/tex] is the distance of the electron between the positive and negative plate

[tex]0.1 + d_2 + 0.05 = 0.2\\\\d_2 + 0.15 = 0.2\\\\d_2 = 0.2 - 0.15\\\\d_2 = 0.05 \ m[/tex]

[tex]V_2 = \frac{V_1d_2}{d_1} \\\\V_2 = \frac{12 \times 0.05}{0.2} \\\\V_2 = 3.0 \ V[/tex]

Thus, the potential difference between the initial and final point is 3.0 V.

Learn more here:https://brainly.com/question/1494836

Answer:

Explanation:

Average speed is total distance traveled over the time needed to do so.

d = vt

v = (1.0(3.0) + 1.6(5.0) + 1.4(4.0) / (3.0 + 5.0 + 4.0)

v = 16.6 / 12

v = 1.383333333...

v = 1.4 m/s

Answer:

Newton's second law states that .

Formulically

F=Force

m=mass

a=acceleration

The best example is hitting a tennis ball.

Answer:

Transmission

Explanation:

It’s the passage of electromagnetic waves through a medium.

The passage of a wave through a medium is known as transmission.

The transmission of waves may be characterized as a wave traveling through a medium or into a new medium. Not all waves transmit through the same materials. It significantly depends on the type of wave, the type of material, and even the frequency of the wave.

Transmission is generally the passage of electromagnetic radiation through a medium. While Reflection is the process by which electromagnetic radiation is returned either at the boundary between two media (surface reflection) or at the interior of a medium (volume reflection).

Waves can go through things. Waves go through water, light can pass through the glass, and sound can pass through walls. The material the wave passes through is called a medium. A single disturbance passing through a medium is called a pulse.

Therefore, the passage of a wave through a medium is known as transmission.

To learn more about the Transmission of the wave, refer to the link:

https://brainly.com/question/27844842

#SPJ6

Answer:

please mark me as brainliest I'm begging u

Explanation:

The behavior of an object that has been charged is dependent upon whether the object is made of a conductive or a nonconductive material. Conductors are materials that permit electrons to flow freely from particle to particle. An object made of a conducting material will permit charge to be transferred across the entire surface of the object. If charge is transferred to the object at a given location, that charge is quickly distributed across the entire surface of the object. The distribution of charge is the result of electron movement. Since conductors allow for electrons to be transported from particle to particle, a charged object will always distribute its charge until the overall repulsive forces between excess electrons is minimized. If a charged conductor is touched to another object, the conductor can even transfer its charge to that object. The transfer of charge between objects occurs more readily if the second object is made of a conducting material. Conductors allow for charge transfer through the free movement of electrons

Answer:

138

Explanation:

(since there's a blank next to "9x y j", I'm assuming the y of F(x, y) is 9x[tex]\sqrt{y}[/tex] j)

1) find the partial derivative of each:

[tex](6y^{\frac{3}{2} })i + (9x\sqrt{y} )j[/tex]  

 [tex]f_{x} =(6y^{\frac{3}{2} })_{x} = \int\limits{6y^{\frac{3}{2} }} \, dx = 6xy^{\frac{3}{2} } +c \\\\f_{y} = (9x\sqrt{y} )_{y} = \int\limits{9xy^{\frac{1}{2} } } \, dy = 9x(\frac{2}{3} )y^{\frac{3}{2} } +c = 6xy^{\frac{3}{2} } +c[/tex]

2) use partial integrals to make gradient of f:

take whatever you got from partial integral and add them together (if they repeat, just use it once)

[tex]F =[/tex] Vf (V = gradient of)

[tex]F(x, y) = 6xy^{\frac{3}{2} }[/tex]

3) Evaluate the integrals with given points:

Integral of F dotted with dr = F(point B) - F(point A) = F(3, 4) - F(1, 1)

[tex]F(point B) = 6(3)(4)^{\frac{3}{2} }\\F(Point A) = 6(1)(1)^{\frac{3}{2}}\\F(point B) - F(pointA) = 6(3)(4)^{\frac{3}{2} }-(6(1)(1)^{\frac{3}{2}})[/tex]

= 144 - 6 = 138 units of work

Work done by the force field F in moving an object from A to B = 138 J

Given data :

Force field F(x,y) = [tex]6y^{\frac{3}{2} }i + (9x\sqrt{y} ) j[/tex]  

Step 1 : determine the partial derivatives of the vector quantity

Fx = ∫ [tex]6y^{\frac{3}{2} }i = 6xy^{\frac{3}{2} } + c[/tex]

Fy = ∫ [tex](9x \sqrt{y})_{y} = 9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]

Equating the partial derivatives :  

[tex]9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]  = [tex]6xy^{\frac{3}{2} } + c[/tex]

therefore the gradient of F  i.e. F = vF  = F( x,y ) = [tex]6xy^{\frac{3}{2} }[/tex]

Next step : Determine the work done

Work done ( F.dr ) = [ F(point b ) = F( 3,4 ) ]  - [ F(point A) = F( 1,1 ) ]

F(3,4 ) = 6(3)(4)[tex]^{\frac{3}{2} }[/tex]  = 144

F( 1,1 )  = 6(1)(1)[tex]^{\frac{3}{2} }[/tex]    = 6

Therefore the work done by the force field = 144 - 6 = 138 J

Hence we can conclude that the work done by the force field F is = 138 J

Learn more about work done : https://brainly.com/question/21854305

Answer:

OK sure why not!!!!!!!!!!!!

Answer:

The axis of rotation of the Earth is tilted at an angle of 23.5 degrees away from vertical, perpendicular to the plane of our planet's orbit around the sun. The tilt of the Earth's axis is important, in that it governs the warming strength of the sun's energy.

Explanation:

can i get brainliest

Answer:

Critical angle is a angle of incidence, for which refraction is 90 degree, this is a least angle of incidence at which total reflection takes place, please mark me Brainliest

Answer

An Achievement test is an assessment of developed knowledge or skill. ... Achievement tests are developed to measure skills and knowledge learned in a given grade level, usually through planned instruction, such as training or classroom instruction. Achievement tests are often contrasted with aptitude tests.

Explanation:

Answer:

watts is for real power

volt amperes reactive (VA) for reactive power

volt amperes (VA) for apparent power

A. psychodynamic is the personality best explains Sam's behavior

The psychology of mental or emotional forces or processes developing especially in early childhood and their effects on behavior and mental states is called psychodynamic .

Since , any behavior  is not genetical or it never get inherited hence it is not biological . This has been  grown with time and this behavior have been grown in Sam by observing his parents doing the same hence correct option should be A. psychodynamic

learn more about psychodynamic

https://brainly.com/question/10373312?referrer=searchResults

#SPJ2

Answer: C.

Correct me if I'm wrong.