consider the molecules scl2, f2, cs2, cf4, and brcl. (a) which has bonds that are the most polar? cf4 (b) which of the molecules have dipole moments? brcl, scl2

Answers

Answer 1

Sure, I'd be happy to help!

To answer your question, we need to understand what dipole moments are and how they relate to the polarity of bonds in molecules.
bonds negative charges within a molecule. It is caused by the unequal sharing of electrons between atoms in a bond. When one atom has a higher electronegativity than the other, it attracts the shared electrons more strongly, creating a partial negative charge (δ-) on that atom and a partial positive charge (δ+) on the other atom.

The polarity of a bond is determined by the difference in electronegativity between the two atoms involved. The greater the difference, the more polar the bond.

Now let's apply these concepts to the molecules you listed.

CF4 has bonds that are the most polar because fluorine is highly electronegative compared to carbon, creating a large difference in electronegativity and thus a highly polar bond.

BRCl and SCl2 both have dipole moments because they have polar bonds due to differences in electronegativity between the atoms involved.

F2 and CS2 do not have dipole moments because the bonds in these molecules are nonpolar, meaning that the electrons are shared equally between the atoms involved and there is no separation of charge.

I hope that helps! Let me know if you have any further questions.
Hi! Considering the given molecules SCl2, F2, CS2, CF4, and BrCl:

(a) The most polar bonds are found in BrCl. This is because the electronegativity difference between Br and Cl is greater than the other molecules, creating a stronger dipole.

(b) The molecules with dipole moments are BrCl and SCl2. Both of these molecules have an asymmetric distribution of charge due to the difference in electronegativity between their constituent atoms.

Learn more about bonds in molecules here;

https://brainly.com/question/29224615

#SPJ11


Related Questions

The standard reduction potential E° for the reduction of permanganate in acidic solution is +1.51 V. What is the reduction potential for this half-reaction at pH = 5.00? E° = +1.51 V MnO4 (aq) + 8 H+ (aq) + 5 € → Mn²+ (aq) + 4H₂O(1) (B) +1.42 V (D) -0.85 V (A) +1.50 V (C) +1.04 V

Answers

The reduction potential for this half-reaction at pH = 5.00 can be calculated using the Nernst equation:

E = E° - (0.0592/n) x log([Mn²+][H₂O]⁴/[MnO4][H+]⁸)

where E° is the standard reduction potential, n is the number of electrons transferred in the half-reaction (5 in this case), [Mn²+] and [H₂O] are the concentrations of the products, and [MnO4] and [H+] are the concentrations of the reactants.

At pH = 5.00, the concentration of H+ is 10⁻⁵ M. Assuming the concentration of Mn²+ and H₂O are both 1 M, we can calculate:

E = 1.51 V - (0.0592/5) x log([1][1⁴]/[1][10⁻⁵]⁸) E = 1.51 V - (0.0592/5) x log(10¹⁶) E = 1.51 V - 2.01 V E = -0.50 V Therefore, the reduction potential for this half-reaction at pH = 5.00 is -0.50 V, which is option (D).

Learn more about standard reduction potential at

https://brainly.com/question/30904774

#SPJ11

given the following free energies of formation: c2h2(g), δGf° = 209.2 kj/mol c2h6(g), δGf°= –32.85 kj/mol Calculate Kp at 298 K for C2H2(g) + 2H2(g) ⇄ C2H6(g)A. 97.7B. 1.10C. 8.17 x 10^30D. 2.69 x 10^42

Answers

The correct answer for the given chemical equation is (B) 1.10.

Equilibrium constant:

The equilibrium constant (K) is a measure of the extent to which a chemical reaction reaches equilibrium. It is defined as the ratio of the product of the concentrations of the products raised to their stoichiometric coefficients, divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients, all at equilibrium.

The equilibrium constant (Kp) can be calculated using the equation:

ΔG° = -RT ln Kp

where ΔG° is the standard free energy change for the reaction, R is the gas constant (8.314 J/mol·K), T is the temperature in kelvin (298 K), and ln is the natural logarithm.

The standard free energy change for the reaction can be calculated using the free energies of formation of the reactants and products:

ΔG° = ΣnΔGf°(products) - ΣnΔGf°(reactants)

ΔG° = (1 mol)(-32.85 kJ/mol) - (1 mol)(209.2 kJ/mol) + (1 mol)(2 x 0 kJ/mol)

ΔG° = -242.9 kJ/mol

Now, substituting the values in the equation for Kp:

-ΔG° / RT = ln Kp

-(242900 J/mol) / ((8.314 J/mol·K)(298 K)) = ln Kp

ln Kp = -32.01

Kp = [tex]e^{-32.01}[/tex] = 1.10 x [tex]10^{-14}[/tex]

Therefore, the answer is (B) 1.10.

What is energy an formation?

The energy of formation (ΔHf°) is the enthalpy change that occurs when one mole of a compound is formed from its constituent elements in their standard states (i.e., the most stable form of the element at a given temperature and pressure). The standard state of an element is defined as its most stable form at 1 atmosphere pressure and a specified temperature (usually 25°C or 298 K).

The energy of formation is a thermodynamic property that provides information about the stability and reactivity of a compound. The energy of formation is usually reported in units of kilojoules per mole (kJ/mol) or kilocalories per mole (kcal/mol).

To know more about equilibrium constant, visit:

https://brainly.com/question/14773668

#SPJ1

The correct answer for the given chemical equation is (B) 1.10.

Equilibrium constant:

The equilibrium constant (K) is a measure of the extent to which a chemical reaction reaches equilibrium. It is defined as the ratio of the product of the concentrations of the products raised to their stoichiometric coefficients, divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients, all at equilibrium.

The equilibrium constant (Kp) can be calculated using the equation:

ΔG° = -RT ln Kp

where ΔG° is the standard free energy change for the reaction, R is the gas constant (8.314 J/mol·K), T is the temperature in kelvin (298 K), and ln is the natural logarithm.

The standard free energy change for the reaction can be calculated using the free energies of formation of the reactants and products:

ΔG° = ΣnΔGf°(products) - ΣnΔGf°(reactants)

ΔG° = (1 mol)(-32.85 kJ/mol) - (1 mol)(209.2 kJ/mol) + (1 mol)(2 x 0 kJ/mol)

ΔG° = -242.9 kJ/mol

Now, substituting the values in the equation for Kp:

-ΔG° / RT = ln Kp

-(242900 J/mol) / ((8.314 J/mol·K)(298 K)) = ln Kp

ln Kp = -32.01

Kp = [tex]e^{-32.01}[/tex] = 1.10 x [tex]10^{-14}[/tex]

Therefore, the answer is (B) 1.10.

What is energy an formation?

The energy of formation (ΔHf°) is the enthalpy change that occurs when one mole of a compound is formed from its constituent elements in their standard states (i.e., the most stable form of the element at a given temperature and pressure). The standard state of an element is defined as its most stable form at 1 atmosphere pressure and a specified temperature (usually 25°C or 298 K).

The energy of formation is a thermodynamic property that provides information about the stability and reactivity of a compound. The energy of formation is usually reported in units of kilojoules per mole (kJ/mol) or kilocalories per mole (kcal/mol).

To know more about equilibrium constant, visit:

https://brainly.com/question/14773668

#SPJ1

QUESTION 4 10 points Save Answer What is the kw of pure water at 53.2°C if the pH is 7.1? Enter your answer in scientific notation using "e" instead of "X101" (1.23x10-7 = 1.23e-7) and round to three sig figs. QUESTION 5 10 points Save Answer Aspirin is a weak acid with a Ka = 0.0003154. What is the pH of a solution created from 0.28 M aspirin? Round answer to 3 sig figs. QUESTION 6 10 points Save Answer What is the percent ionization of a 0.272 M acetic acid solution with a ka = 1.75x10-57 Round answer to 3 sig figs and do not include the percent sign. QUESTION 7 10 points Save Answer What is the pH of a 0.122 M solution of Ba(OH)2? Round answer to two decimal places.

Answers

The kw of pure water at 53.2°C if the pH is 7.1 is equal to 4.21e⁻¹².

The pH of the solution is 3.19.

The percent ionization of a weak acid is 0.0000000000000000000000000000000000000000016.

The pH of the Ba(OH)₂  is 13.04.

Question 4:At 53.2°C, the Kw of water is 4.21e-12, which is calculated using the equation Kw = [H+][OH-] and the fact that at pH 7.1, the concentration of H+ ions is equal to the concentration of OH- ions.

Question 5:Using the Ka value for aspirin, the concentration of H+ ions in a 0.28 M solution of aspirin can be calculated as 3.98e-5. The pH of the solution is then determined using the equation pH = -log[H+], resulting in a pH of 3.19.

Question 6:The percent ionization of a weak acid is given by the equation % ionization = [H+]/[HA] × 100. Using the Ka value and the initial concentration of acetic acid, the concentration of H+ ions can be calculated as 5.18e-29.

Dividing this by the initial concentration of acetic acid and multiplying by 100 gives a percent ionization of 0.0000000000000000000000000016.

Question 7:Ba(OH)2 is a strong base that dissociates completely in water, resulting in the formation of 2 OH- ions. Using the concentration of OH- ions, the pOH of the solution can be calculated as 0.33. Subsequently, the pH of the solution is found using the equation pH + pOH = 14, resulting in a pH of 13.04.

For more questions like pH click the link below:

https://brainly.com/question/15289741

#SPJ11

The kw of pure water at 53.2°C if the pH is 7.1 is equal to 4.21e⁻¹².

The pH of the solution is 3.19.

The percent ionization of a weak acid is 0.0000000000000000000000000000000000000000016.

The pH of the Ba(OH)₂  is 13.04.

Question 4:At 53.2°C, the Kw of water is 4.21e-12, which is calculated using the equation Kw = [H+][OH-] and the fact that at pH 7.1, the concentration of H+ ions is equal to the concentration of OH- ions.

Question 5:Using the Ka value for aspirin, the concentration of H+ ions in a 0.28 M solution of aspirin can be calculated as 3.98e-5. The pH of the solution is then determined using the equation pH = -log[H+], resulting in a pH of 3.19.

Question 6:The percent ionization of a weak acid is given by the equation % ionization = [H+]/[HA] × 100. Using the Ka value and the initial concentration of acetic acid, the concentration of H+ ions can be calculated as 5.18e-29.

Dividing this by the initial concentration of acetic acid and multiplying by 100 gives a percent ionization of 0.0000000000000000000000000016.

Question 7:Ba(OH)2 is a strong base that dissociates completely in water, resulting in the formation of 2 OH- ions. Using the concentration of OH- ions, the pOH of the solution can be calculated as 0.33. Subsequently, the pH of the solution is found using the equation pH + pOH = 14, resulting in a pH of 13.04.

For more questions like pH click the link below:

https://brainly.com/question/15289741

#SPJ11

Which of the following statements is true? A) A buffer forms when any acid or base are mixed together B) A buffer forms when a strong acid is mixed with a weak acid. C) A buffer forms when a conjugate weak acid/weak base pair are mixed together. D) A buffer forms when a weak acid is mixed with a weak base.

Answers

The correct statement is C)  A buffer forms when a conjugate weak acid/weak base pair are mixed together.

A buffer is a solution that resists changes in pH when small amounts of acid or base are added to it. It is made up of a weak acid and its conjugate base, or a weak base and its conjugate acid. When a strong acid or strong base is added to a solution, it can completely ionize and change the pH significantly, which is why they cannot form a buffer. However, when a weak acid is mixed with a weak base, they can form a conjugate acid-base pair and act as a buffer solution.

Learn more about conjugate acid here:

https://brainly.com/question/31229565

#SPJ11

arrange the following solvents by polarity (least to most polar): water, acetone, isopropanol, ethanol, and toluene

Answers

These solvents are arrange by polarity from least to most polar. The order is as follows: toluene, acetone, isopropanol, ethanol, and water.

The solvents arranged from least to most polar are: toluene, acetone, ethanol, isopropanol, and water.
 A polar aprotic solvent is a solvent that lacks an acidic proton and is polar. Such solvents lack hydroxyl and amine groups. In contrast to protic solvents, these solvents do not serve as proton donors in hydrogen bonding, although they can be proton acceptors. These solvents are able to dissolve both types of substances because they have a partially positive end (the polar part) and a partially negative end (the aprotic part), which allows them to interact with both types of molecules.

Visit here to learn more about  polarity : https://brainly.com/question/13468845
#SPJ11

31. Rank the following compounds in order of increasing rates of their SN2 reactions.
Rank the following compounds in order of increasin

Answers

In general, the following factors increase the rate of SN2 reactions:
1. Decreased steric hindrance around the electrophilic carbon
2. Increased nucleophilicity of the attacking nucleophile
3. Increased leaving group ability of the leaving group

With these factors in mind, the compounds can be ranked in order of increasing rates of SN2 reactions as follows:

1. tert-butyl chloride (most hindered)
2. isopropyl chloride
3. ethyl chloride
4. methyl chloride (least hindered)

So, the correct order from slowest to fastest SN2 reaction is: tert-butyl chloride, isopropyl chloride, ethyl chloride, and methyl chloride.

To know more about SN2 reactions:

https://brainly.com/question/27060397

#SPJ11

when can i use the henderson hasselbalch equation

Answers

An expression in chemistry that can be used to prepare buffer solutions is the Henderson-Hasselbalch equation.

The Henderson-Hasselbalch equation can be used to calculate the pH of a solution that contains a weak acid and its conjugate base, or a weak base and its conjugate acid. It is used when you have a buffer solution, which is a solution that can resist changes in pH when small amounts of acid or base are added. The Henderson-Hasselbalch equation allows you to calculate the pH of a buffer solution based on the concentration of the weak acid or base, the concentration of its conjugate base or acid, and the dissociation constant of the weak acid or base.

The Henderson-Hasselbalch equation is a chemical expression that can be used to determine an acid-base ratio in order to compute the pH of a buffer or to determine the acid and base concentrations required for a certain pH.

Learn more about Henderson-Hasselbalch equation here

https://brainly.com/question/13423434

#SPJ11

a chem 1314 student narrowed the unknown choice down to nacl or naoh. what reagent from this lab should she add to make her final identification?

Answers

Reagent from this lab should she add to make her final identification is NaCl or NaOH.

To make the final identification between NaCl and NaOH, the chem 1314 student should add a reagent that can differentiate between the two compounds. One possible reagent that could be used is silver nitrate (AgNO3). If the unknown compound is NaCl, then when AgNO3 is added, a white precipitate of silver chloride (AgCl) will form. However, if the unknown compound is NaOH, then no precipitate will form when AgNO3 is added. Therefore, the addition of silver nitrate can help the student identify whether the unknown compound is NaCl or NaOH.

Precipitates are solids that are created during or as byproducts of chemical reactions in solutions. Precipitates come in a wide variety of sizes and shapes, from tiny granules to huge pieces. The chemical compound NaCl is also referred to as sodium chloride. It is frequently called table salt.

Learn more about Precipitates here

https://brainly.com/question/31046678

#SPJ11

Pb203
+
2K3N
-)
2PBN
* 3K20
If 12.7 g of K20 were made with a percentage yield of 78.4 %, what mass of Pb20s was used?

Answers

Explanation:

The Molar mass of K2O is 94,2 g/mol

The moles of K2O can be calculated

[tex]n_{K_2 O} = \frac{12,7 g}{94,2 g/mol} = 0,135 mol[/tex]

The stoichiometric coefficients must be considered: in order to produce 3 moles of K2O, 1 mole of Pb2O3 are needed. In other words, if 1 mole of K2O is produced, 1/3 of a mole of Pb2O3 is needed. So

[tex]n_{Pb2O3} = \frac{0,135 mol}{3} = 0,0450 mol[/tex]

The molar mass of Pb2O3 is 462,4 g/mol

The theoretical mass of Pb2O3 used to produce K2O is

[tex]m_{Pb2O3} = 0,0450 mol \times 462,4 g/mol = 20,8 g[/tex]

Since the yield is not 100%, a larger mass was needed to perform the reaction.

[tex]\frac{20,8}{78,4} = \frac{x}{100} \\ \\ x = \frac{20,8 \times 100}{78,4} = 26,5 g[/tex]

Liquid potassium chloride, KCl(l), is decomposed in an electrolytic cell to form potassium and chlorine. Liquid KCl consists of ions. K+ and CI (a) Write balanced equations for the half-cell reactions at the anode and at the cathode, and for the overall cell reaction. (b) If a current of 2.00 A is passed through the cell for a period of 5.00 hours, calculate the mass of metal deposited and of gas liberated.

Answers

A) The balanced equations for the half-cell reactions at cathode and anode and  the overall cell reaction are:

K+ + e- -> K (At cathode)

2Cl- -> Cl2 + 2e- (At anode)

2KCl(l) -> 2K(l) + Cl2(g) (Overall cell reations)

B) The mass of K deposited is 14.57 g, and the mass of Cl2 gas produced is 26.45 g.

A) At the cathode: K+ + e- -> K (Reduction half-reaction)

At the anode: 2Cl- -> Cl2 + 2e- (Oxidation half-reaction)

Overall cell reaction: 2KCl(l) -> 2K(l) + Cl2(g)

B) First, we need to calculate the number of moles of electrons that flowed through the cell:

2.00 A * 5.00 h = 36000 C

n = Q/F = 36000 C / 96485 C/mol = 0.373 mol

At the cathode, 0.373 mol of electrons were consumed to form K metal:

m(K) = n(MW) = 0.373 mol * 39.10 g/mol = 14.57 g

At the anode, 0.373 mol of electrons were produced by the oxidation of Cl- ions, and reacted with H2O to form Cl2 gas:

2Cl- -> Cl2 + 2e-

The volume of Cl2 gas produced can be calculated using the ideal gas law:

PV = nRT

V = nRT/P = (0.373 mol * 8.314 J/mol.K * (273.15+25) K) / (101.325 kPa * 1000 Pa/kPa) = 0.0267 m3

The mass of Cl2 gas produced can be calculated using its molar mass:

m(Cl2) = n(MW) = 0.373 mol * 70.90 g/mol = 26.45 g

Therefore, the mass of K deposited is 14.57 g, and the mass of Cl2 gas produced is 26.45 g.

for more such question on half-cell reactions

https://brainly.com/question/15689958

#SPJ11

fill in the blank coefficient in the balanced version of the following chemical equation. ch4 h2o⟶co h2

Answers

The coefficients in the balanced chemical equation are:
CH₄ (1) + H₂O (1) ⟶ CO (1) + H₂ (3)

Balance the chemical equation CH₄ + H₂O ⟶ CO + H₂. Please follow the steps below:

1. Identify the number of atoms for each element on both sides of the equation:
  Unbalanced equation: CH₄ + H₂O ⟶ CO + H₂
  Left side: C = 1, H = 4 + 2 = 6, O = 1
  Right side: C = 1, H = 2, O = 1

2. Balance the elements by adjusting the coefficients:
  - Carbon is already balanced.
  - To balance the hydrogen, we can multiply H₂ on the right side by 3: CH₄ + H₂O ⟶ CO + 3H₂
  Balanced equation: CH₄ + H₂O ⟶ CO + 3H₂

To know more about "Atom" refer here:

https://brainly.com/question/14644957#

#SPJ11

find the solubility of cui in 0.32 m kcn solution. the ksp of cui is 1.1×10−12 and the kf for the cu(cn)2− complex ion is 1×1024 .

Answers

The solubility of CuI in a 0.32 M KCN solution is 1.03 M.

To find the solubility, first determine the reaction quotient (Q) for CuI dissolving in KCN:

CuI(s) + 2 KCN(aq) -> Cu(CN)2⁻(aq) + 2 K⁺(aq) + I⁻(aq)

Ksp(CuI) = [Cu⁺][I⁻] = 1.1 x 10⁻¹²
Kf(Cu(CN)2⁻) = [Cu(CN)2⁻]/([Cu⁺][CN⁻]^2) = 1 x 10²⁴

Now, set up the equilibrium equation with the given concentrations:
Q = [Cu(CN)2⁻]/([Cu⁺][0.32]²)

Since Q > Ksp, the reaction shifts right, and CuI dissolves. Substitute the Kf expression into the Q equation and solve for [Cu⁺]:
[Cu⁺] = (1 x 10²⁴)/[CN⁻]² = (1 x 10²⁴)/(0.32)²= 1.03 M

Thus, the solubility of CuI in a 0.32 M KCN solution is 1.03 M.

To know more about reaction quotient click on below link:

https://brainly.com/question/30200804#

#SPJ11

what is the ground state term of fe(cn6)4-

Answers

The ground state term of Fe(CN)6^4- is a quintet (5) configuration with a total orbital angular momentum quantum number (L) value of 2, represented by the term symbol 5D. This configuration is a result of the high-spin Fe^2+ ion with four unpaired electrons distributed among the d orbitals.

The ground state term of Fe(CN)6⁴⁻ is a configuration in which the central iron (Fe) atom is at its lowest energy level. In this complex, Fe is in the +2 oxidation state, which means it has lost two electrons compared to its neutral state. The ground state term for Fe in Fe(CN)6⁴⁻ is 5D, indicating a quintet (5) configuration with a total orbital angular momentum quantum number (L) value of 2, which is represented by the letter D. In Fe(CN)6^4-, the central iron (Fe) atom is in the +2 oxidation state, which means it has lost two electrons compared to its neutral state. The six cyanide (CN^-) ligands are negatively charged and each donate a lone pair of electrons to form coordinate covalent bonds with the Fe^2+ ion, resulting in an octahedral geometry. The ground state term of Fe(CN)6^4- is 5D, which indicates a quintet (5) configuration with a total orbital angular momentum quantum number (L) value of 2, represented by the letter D. The ground state term symbol is determined by the number of unpaired electrons and the value of L. In Fe(CN)6^4-, the Fe^2+ ion has four unpaired electrons, which gives it a high-spin configuration.

To know more about ground state please refer: https://brainly.com/question/1314094

#SPJ11

I’m not sure what’s going wrong on problem 25

Answers

The nature of the hemoglobin in the lungs lungs is Hb(O2)4.

The volume of water added is  1851.7 mL

What is the Le Chateliers principle?

Le Chatelier's principle is a principle in chemistry that describes how a system at equilibrium responds to changes in its environment.

Using the dilution principle;

C1V1 = C2V2

C1 = Antilog(-2.025)

= 9.4 * 10^-3 M

C2 = Antilog (-4.050)

= 8.9 * 10^-5 M

Then;

V2 = C1V1/C2

V2 = 9.4 * 10^-3 M * 17.7/8.9 * 10^-5 M

V2 = 1869.4 mL

Volume of water added = 1869.4 mL - 17.7 mL

= 1851.7 mL

Learn more about Le Chateliers principle:https://brainly.com/question/29009512

#SPJ1

how many photons per second strike a sheet of paper of size

Answers

The number of photons per second that strike a sheet of paper of a certain size will depend on the source of the photons and the distance between the source and the paper.

For example, if we consider sunlight as the source of photons and assume that the paper is placed at a distance of 1 meter from the source, then the number of photons per second that strike the paper can be estimated to be around 10^18 (1 followed by 18 zeros) photons per second. However, if we consider a laser beam as the source of photons and assume that the paper is placed at a much closer distance, say 1 centimetre, then the number of photons per second that strike the paper will be much higher. In general, the number of photons per second that strike a sheet of paper will depend on various factors such as the energy of the photons, the intensity of the light source, and the distance between the source and the paper.

Learn more about Photons here: brainly.com/question/28134171

#SPJ11

Impressed current uses external power to force current to flow from the anode to the structure through ______
A) metallic path
B) air
C) the electrolyte
D) backfill
E) ions

Answers

Impressed current cathodic protection (ICCP) is a corrosion prevention technique that utilizes an external power source to force a direct electrical current onto a metallic path, preventing corrosion.

The system consists of an anode, which is connected to the positive terminal of a DC power supply, and a cathode, the structure to be protected, connected to the negative terminal. The anode, usually made of an inert material such as platinum, is placed in an electrolyte, which is usually a conductive liquid. As a result, current flows from the anode, through the electrolyte, and onto the structure through a metallic path.
The impressed current system generates a current that is greater than the natural corrosion current, thereby making it more effective than other cathodic protection methods. The power source is typically designed to produce a current density that is sufficient to overcome the natural corrosion rate of the structure. ICCP systems are commonly used in environments with high corrosion rates, such as seawater, and are effective at protecting large structures such as bridges, offshore platforms, and pipelines. The system requires periodic maintenance to ensure that it continues to operate efficiently.

learn more about the corrosion Refer: https://brainly.com/question/31313074

#SPJ11

What is going on in the hexane layer at the end of a Group I Anion experiment?

On a qualitative Analysis for Anions experiment, to a sample, I had to add 3 M HNO3 until it was just acidic. Then, I had to add 3 drops of NaOCl solution then 1mL hexane. After shaking it well, if the solution was yellow, the anion was Br-. If the solution was brown or purple, it was a I- Anion. What is going on with the hexane layer? What does it have to do with the periodic table?

Answers

The hexane layer in a Group I Anion experiment is used to separate the anion from the aqueous solution. The hexane is immiscible with the aqueous solution and will float on top, forming a separate layer.

The hexane layer is then used to test for the presence of an anion by adding a few drops of NaOCl solution to the aqueous solution and then shaking it. If a yellow color appears in the hexane layer, then the anion present is bromide. If the color is brown or purple, then the anion present is iodide.

This is due to the fact that the Group I anions are all halogens and have different colors when reacted with NaOCl. Bromide will produce a yellow color, while iodide will produce either a brown or a purple color. The presence of these Group I anions can be determined by the periodic table, as all the Group I elements are found in the same column.

Know more about hexane layer here

https://brainly.com/question/15967693#

#SPJ11

The concentration of OH- in a saturated solution if Mg(OH)2 is 3.63 times 10-4 M. The Ksp of Mg(OH) is? A. 6.6 X 10^8 B. 4.8 X 10^11 C. 1.3 X 10^7 D. 3.6 X 10^-4 A. 2.4 X 10^11

Answers

The Ksp value of Mg(OH)2 is A. 2.4 X 10^11.

What is the Ksp value of Mg(OH)2?

To find the Ksp of Mg(OH)2, we need to use the equation:

Ksp = [Mg2+][OH-]^2

Since Mg(OH)2 is a strong electrolyte, it will dissociate completely in water, meaning that the concentration of Mg2+ will be equal to the concentration of Mg(OH)2, which is 3.63 times 10-4 M.

We can then use the concentration of Mg2+ to find the concentration of OH- using the equation:

Mg(OH)2 ⇌ Mg2+ + 2OH-

Since Mg(OH)2 is a 1:2 electrolyte, the concentration of OH- will be twice the concentration of Mg2+, or 2(3.63 times 10-4 M) = 7.26 times 10-4 M.

Plugging these values into the Ksp equation, we get:

Ksp = (3.63 times 10-4 M)(7.26 times 10-4 M)^2 = 2.4 times 10^11

Therefore, the answer is A. 2.4 X 10^11.

Learn more about Ksp value

brainly.com/question/13032436

#SPJ11

what is the photon energy of the yellow-orange light ( = 589 nm) produced by sodium vapor streetlights?

Answers

The photon energy (E) of a light wave can be calculated using the formula: the photon energy of the yellow-orange light produced by sodium vapor streetlights is approximately [tex]3.37 x 10^{-19} J[/tex].

E = hc/λ

where h is the Planck constant, c is the speed of light, and λ is the wavelength of the light.

Substituting the values:

λ = 589 nm = [tex]589 x 10^{-9}[/tex] m

h = 6.626 x [tex]10^{-34}[/tex] J s

c = 3.0 x 10^8 m/s

E = (6.626 x [tex]10^{-34}[/tex] J s x 3.0 x [tex]10^{8}[/tex] m/s) / (589 x [tex]10^{-9}[/tex] m)

E = 3.37 x [tex]10^{-19}[/tex] J

Therefore, the photon energy of the yellow-orange light produced by sodium vapor streetlights is approximately 3.37 x [tex]10^{-19}[/tex] J

Learn more about photon energy

https://brainly.com/question/28167863

#SPJ4

number of oxygen atoms in 5.20 mol of al2(so4)3.

Answers

There are [tex]3.757 * 10^{25}[/tex] oxygen atoms in 5.20 moles of at are calculated using Avogadro's number.

To find the number of oxygen atoms in 5.20 mol of [tex]Al_2(SO_4)_3[/tex], follow these steps:

1. Identify the number of oxygen atoms in one molecule of [tex]Al_2(SO_4)_3[/tex].

The formula shows that there are 3 [tex]SO_4[/tex] units, each containing 4 oxygen atoms: 3 x 4 = 12 oxygen atoms per molecule.

2. Calculate the total number of molecules in 5.20 mol of [tex]Al_2(SO_4)_3[/tex].

Use Avogadro's number ([tex]6.022 * 10^{23}[/tex] molecules/mol):

5.20 mol * ([tex]6.022 * 10^{23}[/tex] molecules/mol) = [tex]3.131 * 10^{24}[/tex] molecules.

3. Find the total number of oxygen atoms by multiplying the number of molecules ([tex]3.131 * 10^{24}[/tex]) by the number of oxygen atoms per molecule (12):

([tex]3.131 * 10^{24}[/tex] molecules) * (12 oxygen atoms/molecule) = [tex]3.757 * 10^{25}[/tex] oxygen atoms.

To learn more about atoms click here https://brainly.com/question/30898688

#SPJ11

draw all stereoisomers of the given compound. how many stereoisomers are there, in total?

Answers

The number of stereoisomers for a molecule with two stereocenters should be four. The number of stereoisomers that can exist for a molecule with three stereocenters should not exceed eight.

Because n is the number of chiral centres, the maximum number of stereoisomers for a given constitution is 2n. Enantiomers and diastereomers are the two types of stereoisomers that exist. There are four stereoisomers of the chemical total in this instance, but since one of them is a meso compound, the right response is three. There can be a maximum of two stereoisomers of the atom M. They are a pair of enantiomers.

To know more about stereoisomers, click here:

https://brainly.com/question/31147524

#SPJ4

How many stereoisomers are possible for given compound?

Serge completed an experiment similar to Part A. They made a cell with copper as the cathode (E°red= 0.34 V), and Metal X as the anode. The electrodes were submerged in solutions of their ions. What is the E°red of Metal X in Serge's cell if the E°cell was 1.025 V?

Answers

The standard oxidation potential (E°ox) of Metal X in Serge's cell is -0.685 V.

What exactly are electrodes?

An electrode is an electrical conductor that can carry current into nonmetals and other poor conductors of electricity. An anode and a cathode are the two types of electrodes. The positively charged electrode is known as the anode, while the negatively charged electrode is known as the cathode.

The overall cell potential can be calculated as:

E°cell = E°reduction (cathode) - E°oxidation (anode)

E°reduction = standard reduction potentials of the cathode

E°oxidation = standard reduction potentials of the anode

Copper is the cathode in Serge's cell, and Metal X is the anode. As a result, the half-reactions that occur at the electrodes are:

Cathode (reduction): Cu^{2+}(aq) + 2e- → Cu(s) (E°red = 0.34 V)

Anode (oxidation): Metal X(s) → Xn+(aq) + ne- (E°ox)

The overall cell reaction is:

Cu^{2+}(aq) + Metal X(s) → Cu(s) + Xn+(aq) (E°cell = 1.025 V)

E°cell = E°reduction (cathode) - E°oxidation (anode)

1.025 V = 0.34 V - E°ox

E°ox = 0.34 V - 1.025 V

E°ox = -0.685 V

To know more about the electrodes visit:

https://brainly.com/question/18251415

#SPJ1

The standard oxidation potential (E°ox) of Metal X in Serge's cell is -0.685 V.

What exactly are electrodes?

An electrode is an electrical conductor that can carry current into nonmetals and other poor conductors of electricity. An anode and a cathode are the two types of electrodes. The positively charged electrode is known as the anode, while the negatively charged electrode is known as the cathode.

The overall cell potential can be calculated as:

E°cell = E°reduction (cathode) - E°oxidation (anode)

E°reduction = standard reduction potentials of the cathode

E°oxidation = standard reduction potentials of the anode

Copper is the cathode in Serge's cell, and Metal X is the anode. As a result, the half-reactions that occur at the electrodes are:

Cathode (reduction): Cu^{2+}(aq) + 2e- → Cu(s) (E°red = 0.34 V)

Anode (oxidation): Metal X(s) → Xn+(aq) + ne- (E°ox)

The overall cell reaction is:

Cu^{2+}(aq) + Metal X(s) → Cu(s) + Xn+(aq) (E°cell = 1.025 V)

E°cell = E°reduction (cathode) - E°oxidation (anode)

1.025 V = 0.34 V - E°ox

E°ox = 0.34 V - 1.025 V

E°ox = -0.685 V

To know more about the electrodes visit:

https://brainly.com/question/18251415

#SPJ1

Identify the solute and solvent in each solution. (a) 80-proof vodka (40% ethyl alcohol) (b) oxygenated water (c) antifreeze (ethylene glycol and water)

Answers

The solute and solvent in each solution are: a) In 80-proof vodka, the solute is ethyl alcohol and the solvent is water. (b) In oxygenated water, the solute is oxygen and the solvent is water. (c) In antifreeze, the solute is ethylene glycol and the solvent is water.

A solute in any form, i.e. liquid, solid, or gas, is dissolved by a solvent to form a solution. A solvent is defined as a substance that dissolves the solute. It is ordinarily a liquid.

(a) In 80-proof vodka (40% ethyl alcohol), the solute is ethyl alcohol and the solvent is water.
(b) In oxygenated water, the solute is oxygen gas and the solvent is water.
(c) In antifreeze (ethylene glycol and water), the solute is ethylene glycol and the solvent is water.

To learn more about solute, visit: https://brainly.com/question/19958714

#SPJ11

predict the major absorbance bands in the ir spectra for both products, 3,3-dimethyl-2- butanone and 2,3-dimethylbut-3-en-2-ol, and outline the differences in the ir spectra. (6 pts)

Answers

The main differences in the IR spectra between 3,3-dimethyl-2-butanone and 2,3-dimethylbut-3-en-2-ol are due to the presence of carbonyl absorption in the former and hydroxyl and alkene absorptions in the latter, which can be used to differentiate them based on their functional groups.

For 3,3-dimethyl-2-butanone, the major absorbance bands in the IR spectra would be:
1. Carbonyl (C=O) stretching: around 1700 cm⁻¹
2. C-H stretching for methyl and methylene groups: 2850-3000 cm⁻¹
3. C-H bending for methyl groups: around 1375 cm⁻¹

For 2,3-dimethylbut-3-en-2-ol, the major absorbance bands in the IR spectra would be:
1. Hydroxyl (O-H) stretching: around 3200-3600 cm⁻¹ (broad)
2. C=C stretching for alkene: around 1650 cm⁻¹
3. C-H stretching for methyl, methylene, and alkene groups: 2850-3100 cm⁻¹
4. C-H bending for methyl groups: around 1375 cm⁻¹

The differences in the IR spectra between these two compounds would mainly be the presence of the carbonyl absorption in 3,3-dimethyl-2-butanone and the hydroxyl and alkene absorptions in 2,3-dimethylbut-3-en-2-ol. These differences help in distinguishing the two compounds based on their functional groups.

To know more about IR spectra click here:

https://brainly.com/question/30465075

#SPJ11

Question 12.38 & 12.42 In each case tell which SN2 reaction will proceed faster. 1. The displacement by OH- on CH3CH2I in (a) ethanol or (b) dimethyl sulfoxide. a b 2. The displacement by I- on (a) CH3Cl or (b) CH3OTos. a b

Answers

The [tex]Cl- ion[/tex] is a weaker leaving group than [tex]TosO-[/tex], which means that it is easier to displace.

How  [tex]SN2[/tex] reaction will proceed faster?

The SN2 reaction of [tex]CH3CH2I[/tex] with [tex]OH-[/tex] will proceed faster in (b) dimethyl sulfoxide (DMSO) than in (a) ethanol.

This is because DMSO is a polar aprotic solvent, which means it doesn't have an acidic proton to donate, and its polar nature facilitates the solvation of the ions.

This promotes the nucleophilicity of the [tex]OH-[/tex] ion, making it a stronger nucleophile and increasing the rate of the [tex]SN2[/tex] reaction.

In the second case, the [tex]SN2[/tex] reaction of I- with (a) [tex]CH3Cl[/tex] will proceed faster than with (b) [tex]CH3OT[/tex]os.

This is because [tex]CH3Cl[/tex] is a primary alkyl halide, which means it has a less hindered carbon atom and is therefore more susceptible to nucleophilic attack.

Additionally, the [tex]Cl- ion[/tex] is a weaker leaving group than Tos[tex]O-[/tex], which means that it is easier to displace.

Learn more about leaving group

brainly.com/question/28014622

#SPJ11

Given the following plot for the decomposition of N2O5, calculate the frequency factor (A):Y axis: ln kX axis: 1/t (K)The graph is a linear line.y= -12232x+30.863 R^2=1.000

Answers

The frequency factor (A) for the decomposition of N2O5 is 1.3 x 10^16 s^-1.

To calculate the frequency factor (A) for the decomposition of N2O5, we need to use the Arrhenius equation:

k = A * exp(-Ea/RT)

where k is the rate constant, A is the frequency factor, Ea is the activation energy, R is the gas constant (8.314 J/mol*K), and T is the temperature in Kelvin.

From the given plot, we have ln k on the Y axis and 1/t (K) on the X axis. We know that the slope of the linear line in this plot is equal to -Ea/R, so we can calculate Ea first:

slope = -Ea/R
-12232 = -Ea/8.314
Ea = 101609 J/mol

Now we can rearrange the Arrhenius equation to solve for the frequency factor (A):

ln k = ln A - Ea/RT

We can use any point on the linear line to solve for ln k and 1/t. Let's use the point (0.003333 K, 1.864) from the graph:

ln k = -12232 * 0.003333 + 30.863
ln k = -88.463

1/t = 0.003333 K^-1

Now we can substitute these values into the rearranged Arrhenius equation and solve for A:

-88.463 = ln A - (101609 J/mol) / (8.314 J/mol*K * 0.003333 K^-1)
-88.463 = ln A - 39137
ln A = 39048
A = exp(39048)
A = 1.3 x 10^16 s^-1

Thus, the frequency factor (A) for the decomposition of N2O5 is 1.3 x 10^16 s^-1.

Know more about Arrhenius Equation here: https://brainly.com/question/30514582

#SPJ11

CHEM 112 Acid and base basics (adapted from Dr. Sushilla Knottenbelt) 1. Sodium azide, NaN3, is sometimes added to water to kill bacteria. Sodium salts are generally soluble, and hence when dissolved in water, Na+ and N3- ions are produced. Azide, N3-, acts as a base. 2. What is the conjugate acid of azide? b. While the balanced equation to show the reaction of azide with water. Label acid, base and conjugue acid and base Morular basis for acid strength 2.a. What is the difference between a strong acid and a weak acid? b. The following exercise asks to you to deduce the rules for acid strength by comparing similarities and differences between strong and weak acids. The strong acids are: HCI, HBr,HI, HNO, H2SO4 and HCIO. For the purposes of this course, assume ALL other acids are weak! i For naming purposes in CHEM 121, you divided all acids into 2 categories - binary acids and oxyacids. Classify each strong acid as binary or oxy.

Answers

1. The conjugate acid of azide, N₃⁻, is hydrazoic acid, HN₃.

2.a. The difference between a strong acid and a weak acid lies in their ability to dissociate in water.

b. Strong acids have similar properties: they have high acidity, are very reactive, and completely dissociate in water.

c. The strong acids HCI, HBr, HI, and HCIO are binary acids, while HNO₃ and H₂SO₄ are oxyacids.

In the presence of water, the following reaction occurs: N₃⁻ + H₂O ↔ OH⁻ + HN₃. In this reaction, azide acts as a base, while water acts as an acid. The conjugate base of water, OH⁻, is formed, while the conjugate acid of azide, HN₃, is formed.

A strong acid completely dissociates in water, meaning that all of its molecules break apart into ions. A weak acid only partially dissociates, meaning that only some of its molecules break apart into ions.

Weak acids have lower acidity, are less reactive, and only partially dissociate in water. The rules for acid strength can be deduced from these similarities and differences. Strong acids are typically composed of a single element (e.g. HCl, HBr, HI) or contain multiple oxygens (e.g. HNO₃, H₂SO₄, HCIO). Weak acids typically contain one or more of the following elements: carbon, sulfur, or nitrogen. Additionally, the strength of an acid is related to the stability of its conjugate base: the weaker the acid, the stronger its conjugate base.

Learn more about conjugate acid: https://brainly.com/question/31229565

#SPJ11

1. The conjugate acid of azide, N₃⁻, is hydrazoic acid, HN₃.

2.a. The difference between a strong acid and a weak acid lies in their ability to dissociate in water.

b. Strong acids have similar properties: they have high acidity, are very reactive, and completely dissociate in water.

c. The strong acids HCI, HBr, HI, and HCIO are binary acids, while HNO₃ and H₂SO₄ are oxyacids.

In the presence of water, the following reaction occurs: N₃⁻ + H₂O ↔ OH⁻ + HN₃. In this reaction, azide acts as a base, while water acts as an acid. The conjugate base of water, OH⁻, is formed, while the conjugate acid of azide, HN₃, is formed.

A strong acid completely dissociates in water, meaning that all of its molecules break apart into ions. A weak acid only partially dissociates, meaning that only some of its molecules break apart into ions.

Weak acids have lower acidity, are less reactive, and only partially dissociate in water. The rules for acid strength can be deduced from these similarities and differences. Strong acids are typically composed of a single element (e.g. HCl, HBr, HI) or contain multiple oxygens (e.g. HNO₃, H₂SO₄, HCIO). Weak acids typically contain one or more of the following elements: carbon, sulfur, or nitrogen. Additionally, the strength of an acid is related to the stability of its conjugate base: the weaker the acid, the stronger its conjugate base.

Learn more about conjugate acid: https://brainly.com/question/31229565

#SPJ11

a mixture of he , n2 , and ar has a pressure of 14.8 atm at 28.0 °c. if the partial pressure of he is 2645 torr and that of ar is 2953 mm hg, what is the partial pressure of n2 ?

Answers

At 28°C. the partial pressure of N₂ in the mixture of He, N₂, and Ar is 5,650 torr.

To determine the partial pressure of N₂ in the mixture, we first convert all the given values into one consistent unit, then use Dalton's Law of partial pressures.

1. Convert the total pressure to a consistent unit. Since the partial pressures of He and Ar are given in torr and mmHg, let's convert the total pressure from atm to torr:
Total pressure in torr = 14.8 atm * (760 torr / 1 atm) = 11,248 torr

2. Since 1 torr = 1 mmHg, we can use either unit for our calculations. Let's use torr.

3. Use Dalton's Law of partial pressures to find the partial pressure of N₂:
Total pressure = P(He) + P(Ar) + P(N₂)
11,248 torr = 2,645 torr + 2,953 torr + P(N₂)

4. Solve for P(N₂):
P(N₂) = 11,248 torr - 2,645 torr - 2,953 torr
P(N₂) = 5,650 torr

The partial pressure of N₂ in the mixture is 5,650 torr.

Learn more about Dalton's Law of partial pressures here: https://brainly.com/question/19975849

#SPJ11

a) What is the pH of an aqueous solution that is 0.25 M HNO2 and 0.32 M NaNO2? b) Write the predominant chemical reaction (including physical states) that occurs when 0.05 mol of KOH is added to 1.00 L of the solution in part a. c) Calculate the pH of the solution described in part c.

Answers

a) The pH of the solution is 3.57.

b) The chemical reaction is HNO₂ (aq) + KOH (aq) → KNO₂ (aq) + H₂O (l)

c) The pH of the solution after adding 0.05 mol of KOH is 3.54.

a) To determine the pH of the solution, we need to first find the pKa value of HNO₂, which is 3.3. Then, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([NaNO₂]/[HNO₂])

pH = 3.3 + log(0.32/0.25)

pH = 3.57

b) When 0.05 mol of KOH is added to the solution, the following reaction occurs:

HNO₂ (aq) + KOH (aq) → KNO₂ (aq) + H₂O (l)

In this reaction, KOH acts as a base and reacts with HNO₂, which acts as an acid. The reaction results in the formation of KNO₂, which is a salt, and water.

c) To calculate the pH of the solution after adding 0.05 mol of KOH, we need to determine the concentration of HNO₂ and NaNO₂ after the reaction. Since KOH is a strong base, it will react completely with HNO₂, which means that all of the HNO₂ will be converted to NO₂⁻.

The moles of HNO₂ initially present in the solution is:

0.25 M x 1.00 L = 0.25 mol

Since 0.05 mol of KOH is added to the solution, the moles of HNO₂ remaining after the reaction is:

0.25 mol - 0.05 mol = 0.20 mol

The moles of NaNO₂ initially present in the solution is:

0.32 M x 1.00 L = 0.32 mol

Since HNO₂ reacts completely with KOH, the moles of NaNO₂ remaining after the reaction is still 0.32 mol.

Therefore, the new concentrations of HNO₂ and NaNO₂ are:

[HNO₂] = 0.20 mol / 1.00 L = 0.20 M

[NaNO₂] = 0.32 mol / 1.00 L = 0.32 M

Using the Henderson-Hasselbalch equation, we can calculate the pH of the solution after the reaction:

pH = pKa + log([NaNO₂]/[HNO₂])

pH = 3.3 + log(0.32/0.20)

pH = 3.54

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

The isomer [1-methylcyclohexane or 3-methylcyclohexene] is predicted to be formed in greater amounts. The reason is that the more stable, lower energy alkene isomer is the one that [has the highest molar mass, has the highest symmetry, has the higher degree of substitution, or has the lower degree of substitution].

Answers

The isomer 1-methylcyclohexene is predicted to be formed in greater amounts. The reason is that the more stable, lower energy alkene isomer is the one that has the higher degree of substitution.

The isomer predicted to be formed in greater amounts is 1-methylcyclohexane. The reason for this is that it has a higher degree of substitution compared to 3-methylcyclohexene, which makes it more stable and lower in energy. This is because 1-methylcyclohexane has a substituent (methyl group) attached to the primary carbon, while 3-methylcyclohexene has a substituent attached to a secondary carbon. Therefore, the higher degree of substitution in 1-methylcyclohexane makes it the more stable isomer.

Learn more about isomer here: brainly.com/question/12796779

#SPJ11

Other Questions
Find the directional derivative of the function at the given point in the direction of the vector v.f(x, y) = 3ex sin y, (0, /3), v =leftangle0.gif5, 12rightangle0.gifDuf(0, /3) = The term career criminal refers to_______. if an ideal gas has a pressure of 4.15 atm, a temperature of 393 k, and a volume of 55.31 l, how many moles of gas are in the sample? find the smallest natural number n that has the property that 2n>n2 for all n>n. An Eiffel Tower of construction decoration is metaphor How can having too little government regulation limit consumer choice in a mixed-market economy?The strongest businesses can dominate the economy. Competition between businesses can raise prices. Producers cannot control the factors of production. Property can no longer be privately owned can someone help (answer only) :P You place 50.0 mL of 0.500 M NaOH in a coffee cup calorimeter at 25.00C and add 25.0 mL of 0.500 M HCl, also at 25 C. After stirring, the final temperature is 27.21 [Assume that the total volume is the sum of the individual volumes and that the final solution has the same density as water.] Calculate the heat released and the enthalpy of reaction in terms of mols of H20. 6. Find the sales tax. Then find the total cost of the item.$50.00Sales TaxRate of Sales Tax Sales Tax7%? 1. If you observed growth of gram negative organisms on the PEA plate you inoculated does this negate the usefulness of PEA as a selective medium?2. PEA contains only 0.25% phenylethyl alcohol because high concentrations inhibit both gram positive and gram negative organisms. Describe some possible reasons why this occurs. how would you implement a distinct operator with a hash function Question 39 Some cells can partially burn sugar in environments that lack oxygen by utilizing which process? Aerobic Cellular Respiration Photosynthesis dehydration synthesis Fermentation if common stock is issued for an amount greater than par value, the excess would increase question 39 options: cash. retained earnings. paid-in capital in excess of par value. legal capital. How many one-millimeter cubes do you need to fill a cube that has an edge length of 1 centimeter? If a system is not selectively coordinated, unnecessary power loss can occur to loads that otherwise should be unaffected. TrueFalse Preterito and imperfect- write the correct form or either preterite or imperfect . Make sure your answers match the numbers in the story What is pulsus alternans and what does it indicate? The volume of blood in a person's body is proportional to body weight. A person who weighs 200 pounds has approximately 6 quarts of blood. Estimate the number of quarts of bloodin a person who weighs 90 pounds.Complete the proportion, where the ratios have volumes of blood in the numerators and body weights in the denominators.X(Doshot simplify.)XMore The nurse is caring for a child diagnosed with nephrotic syndrome. What finding should the nurse expect when assessing the child?Increased appetiteIncreased activity levelsWeight lossSwelling around the eyes After listening to his physical education professor's lecture about healthy eating habits, Alex decides to investigate how many Calories his classmates eat on an average day. Alex's professor claims that the number of Calories eaten for any given student is normally distributed with mean and standard deviation . Suppose Alex decides to randomly select n students from his school and ask each student how many Calories he or she eats on a typical day. The sampling distribution of Alex's one-sample t-statistic follows a a. t-distribution with n degrees of freedom. b. i-distribution with mean (u and standard deviation c. normal distribution with mean 0 and standard deviation 1. d. t-distribution with n 1 degrees of freedom. e. normal distribution with mean fi and standard deviation .