Conversions to Grams Beryllium is a light metal used to fabricate transparent X-ray windows for medical imaging instruments. How many moles of Be are in a thin-foil window weighing 3.24 g? Select the correct answer below: O 0.360 mol O 2.78mol O 19.50 mol O 29.20 mol

a) 2/1L t will be the volume of the balloon if 0.20 moles of gas are released

b) 1.02L is the volume (in L) at which the balloon bursts.

What is ideal gas law ?

The macroscopic characteristics of ideal gases are related by the ideal gas law (PV = nRT). A gas is considered to be ideal if its particles (a) do not interact with one another and (b) occupy no space (have no volume).

There are four guiding principles that determine if a gas is "ideal": The volume of the gas particles is quite small. The gas particles are of similar size and do not interact with one another through intermolecular forces (attraction or repulsion). The random motion of the gas particles is consistent with Newton's Laws of Motion.

a) PV = nRT

R = 0.082 atm.L/K.mol

V1 = 1.50 L

n1 = 3.00 mol

T1 = 25°C ≅ 298 K

P1 = (RT1n1)/(V1) = (0.082 *298 *4.00 )/(2)

P1 = 48.8 atm

If pressure and temperature remain constant:

T2 = T1 = 298 K

P2 = P1 = 48.8 atm

n2 = 0.20 mol + 4.00 mol = 4.20 mol

V2 = (RT2n2)/P2

V2 = (0.082 * 298 *4.20)/(48.8)

V2 = 2.1 L

b) V1 = 35.0 L

T1 = 20.0 °C = 293K.

P1 = 1.00 atm

P2 = 26.0 torr

T2 = -50.0 °C = 223K

P1V1/T1 = P2V2/T2

1*35/293 = 26*V2/223

V2 = 1.02L

To learn more about ideal gas law :

https://brainly.com/question/27870704

#SPJ4

1) The percentage ionization is 3.2%

2) The percentage ionization is 21.9%

The percent ionization is primarily used for weak acids and bases, where only a fraction of the compound dissociates. Strong acids and bases, on the other hand, completely dissociate in solution, so the percent ionization is 100%.

We have to use the formula;

α = √ka/C * 100

Where;

α = percent ionization

Ka = The dissociation constant

C = concentration

Then;

α = √1.4×10^−4/0.135 * 100

= 3.2 %

2) α = √6.5×10^−3/0.135 * 100

= 21.9%

Learn more about percent ionization:https://brainly.com/question/1619653

#SPJ4

The new molarity of the solution is 0.5 M after diluting 2.0 L of a 1.5 M solution with water until the final volume is 6.0 L.

To find the new molarity of the solution, we can use the formula:

M1V1 = M2V2

Where:

M1 = initial molarity of the solution

V1 = initial volume of the solution

M2 = final molarity of the solution

V2 = final volume of the solution

Given:

M1 = 1.5 M

V1 = 2.0 L

V2 = 6.0 L

Let's substitute the values into the formula and solve for M2:

M1V1 = M2V2

(1.5 M)(2.0 L) = M2(6.0 L)

3.0 mol = M2(6.0 L)

Now, let's isolate M2 by dividing both sides of the equation by 6.0 L:

M2 = 3.0 mol / 6.0 L

M2 = 0.5 M

Therefore, the new molarity of the solution is 0.5 M after diluting 2.0 L of a 1.5 M solution with water until the final volume is 6.0 L.

Learn more about molarity here:

https://brainly.com/question/2817451

#SPJ11

a) In the reaction: [tex]Zn + 2H^+ - > H_2 + Zn_2^+[/tex]

  The substance that is reduced is Zn (zinc), which gains electrons to form Zn2+.

  The substance that is oxidized is H+ (hydrogen), which loses electrons to form H2.

  Oxidizing agent (OA): H+

  Reducing agent (RA): Zn

b) In the reaction: [tex]NH + H_2O - > NH_3 + OH[/tex]

  This reaction does not involve a redox process. It is a simple acid-base reaction where NH acts as a base and H2O acts as an acid.

c) In the reaction: [tex]Br2 + 2 Agl - > 12 + 2 AgBr[/tex]

  The substance that is reduced is Br2 (bromine), which gains electrons to form 2 Br-.

  The substance that is oxidized is Agl (silver iodide), which loses electrons to form 2 Ag.

  Oxidizing agent (OA): Br2

  Reducing agent (RA): Agl

d) In the reaction: [tex]Pb + PbO_2 + 2 SO_4^2- + 4H - > 2 PbSO_4 + 2 H_2O[/tex]

  The substance that is reduced is [tex]PbO_2[/tex] (lead dioxide), which gains electrons to form [tex]PbSO_4[/tex].

  The substance that is oxidized is Pb (lead), which loses electrons to form [tex]PbSO_4[/tex].

  Oxidizing agent (OA): [tex]PbO_2[/tex]

  Reducing agent (RA): Pb

e) In the reaction: [tex]4H + 2 NO_3- + Zn - > Zn_2+ + 2 H_2O + 2 NO_2[/tex]

  The substance that is reduced is [tex]NO_3^-[/tex](nitrate), which gains electrons to form [tex]NO_2[/tex].

  The substance that is oxidized is Zn (zinc), which loses electrons to form [tex]Zn_2^+[/tex].

  Oxidizing agent (OA): [tex]NO_3^-[/tex]

  Reducing agent (RA): Zn

f) In the reaction: [tex]2 OH + 2 MnO_2 + 3 H_2O_2 - > 2 MnO_4^- + 4 H_2O[/tex]

  The substance that is reduced is MnO2 (manganese dioxide), which gains electrons to form [tex]MnO_4^-[/tex].

  The substance that is oxidized is H2O2 (hydrogen peroxide), which loses electrons to form [tex]H_2O[/tex].

  Oxidizing agent (OA): [tex]H_2O_2[/tex]

  Reducing agent (RA): [tex]MnO_2[/tex]

Learn more about Oxidizing agent here:

https://brainly.com/question/29137128

#SPJ11

Answer: The cleaning spray might have containing alcohol.

Explanation:

Some alcohol have the tendency to give an explosive effect on heating. According to the given situation, if the cleaning fluid is containing alcohol and when it had been exposed to air, oxygen and sun heat it will become unstable by producing peroxides which can explode the can in which they have been stored. So, in the given situation, the cleaning spray containing alcohol will explode due to intense heat.

Answer:

Yes I agree

Explanation:

The molar solubility of strontium fluoride is 1.11 × 10⁻³ M.

The Ksp value for strontium fluoride, SrF2, is 2.6 × 10⁻⁹. The molar solubility of strontium fluoride, we use the equation for the solubility product constant (Ksp). Ksp = [Sr²⁺] [F⁻]² Ksp is the product of the concentrations of the dissolved ions, each raised to the power of its stoichiometric coefficient. The balanced equation for the dissociation of strontium fluoride is as follows:SrF₂(s) ⇌ Sr²⁺(aq) + 2 F⁻(aq)The molar solubility of strontium fluoride is represented by "s," so we will substitute "s" into the concentrations of the dissolved ions as shown below:Ksp = [Sr²⁺] [F⁻]²2.6 × 10⁻⁹ = s × (2s)²= 4s³Solving for "s" gives us the molar solubility of strontium fluoride:s = ∛(2.6 × 10⁻⁹ / 4)= 1.11 × 10⁻³ MTherefore, the molar solubility of strontium fluoride is 1.11 × 10⁻³ M.

Learn more about  molar solubility here:

https://brainly.com/question/31043999

#SPJ11

The mass of each gas present in a 1.10 L sample of the gas mixture at 25.0 °C is as follows:

To calculate the mass of each gas, we need to use the ideal gas law and the partial pressure of each gas.

First, we calculate the number of moles of each gas using the equation:

n = PV / RT

For N2:

n(N2) = (236 torr * 1.10 L) / (0.0821 L·atm/mol·K * 298.15 K) = 0.0100 moles

For O2:

n(O2) = (159 torr * 1.10 L) / (0.0821 L·atm/mol·K * 298.15 K) = 0.0067 moles

For He:

n(He) = (131 torr * 1.10 L) / (0.0821 L·atm/mol·K * 298.15 K) = 0.0055 moles

Next, we calculate the mass of each gas using their respective molar masses:

Mass = moles * molar mass

For N2:

Mass(N2) = 0.0100 moles * 28.0134 g/mol = 0.280 g ≈ 0.0462 g

For O2:

Mass(O2) = 0.0067 moles * 31.9988 g/mol = 0.216 g ≈ 0.0309 g

For He:

Mass(He) = 0.0055 moles * 4.0026 g/mol = 0.022 g ≈ 0.0213 g

Therefore, the mass of each gas in the given gas mixture is approximately:

Learn more about molar: https://brainly.com/question/837939

#SPJ11

A. Sucrose (aq) + H₂O(l) ⇌ Glucose (aq) + Fructose (aq) (k = 1.4 × 10⁵)

B. NH₃ (aq) + H₂O(l) ⇌ NH⁴⁺(aq) + OH⁻(aq) (k = 1.6 × 10⁻¹⁵)

C. Fe₂O₃(s) + 3 CO(g) ⇌ 2 Fe(s) + 3 CO₂(g) (k at 727°C = 24)

A. Sucrose (aq) + H₂O(l) ⇌ Glucose (aq) + Fructose (aq) (k = 1.4 × 10⁵)

The high value of the equilibrium constant (k = 1.4 × 10⁵) indicates that the reaction strongly favors the products (glucose and fructose) at equilibrium. This means that at equilibrium, there will be a high concentration of glucose and fructose compared to sucrose and water.

B. NH₃ (aq) + H₂O(l) ⇌ NH₄⁺(aq) + OH⁻(aq) (k = 1.6 × 10⁻⁵)

The low value of the equilibrium constant (k = 1.6 × 10⁻⁵) indicates that the reaction favors the reactants (NH₃ and H₂O) at equilibrium. This means that at equilibrium, there will be a higher concentration of NH₃ and H₂O compared to NH₄⁺ and OH⁻.

C. Fe2O₃(s) + 3 CO(g) ⇌ 2 Fe(s) + 3 CO₂(g) (k at 727°C = 24)

The value of the equilibrium constant (k = 24) does not provide information about whether the reaction favors the reactants or products. To determine which side is favored, one would need to compare the initial concentrations or partial pressures of the reactants and products. However, the presence of the solid Fe2O₃ indicates that it is likely the reactant side (Fe2O₃ and CO) that is favored at equilibrium, as the solid does not contribute to the equilibrium expression.

Overall,

A. The reaction strongly favors the products.

B. The reaction favors the reactants.

C. The information provided is insufficient to determine which side is favored at equilibrium.

To learn more about  equilibrium constant here

https://brainly.com/question/29809185

#SPJ4

The pressure of the gas is 5.52 atm

Mass of CO2 (dry ice) = 9.70 gVolume of the balloon after the solid CO2 sublimes = 1.00 LTemperature of the balloon = 298 KWe need to find out the pressure of the gas. The molar mass of CO2 is:Molecular mass of C = 12.01 g/molMolecular mass of O = 15.99 g/molMolecular mass of CO2 = 12.01 + (2 × 15.99) = 44.01 g/molNow, the number of moles of CO2 = mass/molar mass= 9.70/44.01 = 0.220 molThe Ideal Gas Law is represented by the formula PV = nRT,where P = pressureV = volume of the gasn = number of moles of the gasR = gas constant = 0.0821 L atm/(mol K)T = temperature of the gasNow substituting the values in the Ideal Gas Law,we getP = nRT / V= (0.220 mol × 0.0821 L atm/(mol K) × 298 K) / 1.00 LP = 5.52 atmTherefore, the pressure of the gas is 5.52 atm.

Learn more about pressure here:

https://brainly.com/question/30673967

#SPJ11

The reflectivity that would be necessary to keep the average temperature exactly at the freezing point is 31%.

Reflectivity is the property of reflecting light from the surface of a planet or moon. It is often represented as the ratio of the amount of radiation reflected by a surface to the amount of incident radiation. The Albedo of Earth is approximately 30%. Albedo is a measure of the amount of radiation reflected by a surface. As a result, the Earth's average surface temperature is kept lower than it would be without it.

Approximately 30% of the incident solar radiation is reflected back to space by the Earth's surface and atmosphere, according to the NASA Energy and Water Cycle Study (NEWS). Therefore, to keep the average temperature exactly at the freezing point, a reflectivity of 31% would be required.

You can learn more about radiation at: brainly.com/question/31106159

#SPJ11

In the Newman projection, the adenine group is in the axial position, while the CHOH group is in the equatorial position. This arrangement suggests that the adenine group is pointing upward and away from the ring, while the CHOH group is pointing outward and slightly downward.

Converting the Newman projection into a bond-line chair form involves visualizing the cyclohexane ring in a chair conformation. In this conformation, the six carbon atoms form a hexagonal shape, resembling a chair, with alternating axial and equatorial positions. The adenine group, initially in the axial position, is represented as a substituent extending upward from one of the carbons in the ring, while the CHOH group, initially in the equatorial position, is depicted as a substituent extending outward and slightly downward from the ring.

Learn more about CHOH here ; brainly.com/question/28305078

#SPJ11

The main answer is: E. None of the given statements is correct as none accurately describes the correlation between linear combinations of variables.

None of the given statements accurately describes the correlation between linear combinations of variables. In general, the correlation between two linear combinations (aX + b) and (cY + d) cannot be simply expressed as a product of correlations or as the correlation between the original variables X and Y. The correlation between linear combinations depends on the specific values of a, b, c, and d, as well as the correlation between X and Y.

Therefore, none of the given statements are correct in this case.

The complete question should be:

Which of the following statements are correct if a and c are either both positive?

A. Corr(aX + b, cY + d) = ab Corr(X, Y) + bd

B. Corr(aX + b, cY + d) = ab Corr(X, Y)

C. Corr(aX + b, cY + d) = Corr(X, Y)

D. Corr(aX + b, cY + d) = Corr(aX, cY)

E. None of the given statements is correct.

To learn more about linear combinations, Visit:

https://brainly.com/question/29393965

#SPJ11

The balanced chemical equation for the reaction between ammonia (NH₃) and hydrogen chloride (HCl) to form ammonium chloride (NH₄Cl) is

NH₃ + HCl → NH₄Cl and for the reaction between carbon monoxide (CO) and oxygen (O₂) to form carbon dioxide is (CO2) is 2CO + O₂ → 2CO₂

One molecule of ammonia (NH₃) reacts with one molecule of hydrogen chloride (HCl) to produce one molecule of ammonium chloride (NH₄Cl). The reaction is a simple acid-base reaction, where the ammonia acts as a base by accepting a proton (H⁺) from the hydrogen chloride, forming the ammonium ion (NH₄⁺) and the chloride ion (Cl⁻).

Two molecules of carbon monoxide react with one molecule of oxygen to produce two molecules of carbon dioxide. The equation is balanced with two carbon atoms, four oxygen atoms, and two oxygen atoms on both sides.

The reaction represents the combustion of carbon monoxide, where carbon monoxide acts as the reducing agent and oxygen acts as the oxidizing agent. The balanced equation shows the conservation of mass, with the same number of atoms on both sides. This reaction is an important process in the combustion of carbon-containing fuels.

Learn more about acid here:

https://brainly.com/question/30086613

#SPJ4

The stoichiometric concept can be employed for the 3A(g) → 3B(g) transformation.

The enthalpy change for the reaction leading from A(g) to B(g) with a value of ΔH = 70 kJ implies that the corresponding enthalpy change for the conversion of 3A(g) to 3B(g) will be threefold higher, with ΔH = 3 * 70 kJ = 210 kJ.

To determine the enthalpy change for the inverse reaction of A(g) → B(g), we can utilize the knowledge that the enthalpy change has the inverse polarity in the reverse reaction.

The enthalpy change for the conversion of gas B to gas A will result in a decrease of 70 kJ.

We can determine the enthalpy shift for the A(g) → C(g) reaction by merging the provided equations.

By combining the equations A(g) → B(g) with a heat of reaction of 70 kJ and B(g) → C(g) with a heat of reaction of -110 kJ, we can obtain a new equation.

Through this, we are presented with the generalized reaction of converting A into B, which subsequently forms C, accompanied by a change in enthalpy of -40 kJ within the range of 70 kJ-110 kJ.

Read more about enthalpy changes here:

https://brainly.com/question/16387742

#SPJ4

The complete sentences are:

Page 3:

The effect of energy in phase transitions of matter is that it is required to break the intermolecular forces that hold the particles of a substance together. When energy is added to a substance, the particles move faster and the intermolecular forces are broken. This can cause the substance to change phase.

The interactive demonstration on the sample of water shows that energy is required to melt ice and boil water. When the ice is heated, the particles start to move faster and the ice melts. The temperature of the water stays constant at 0°C until all of the ice has melted. This is because the energy is being used to break the intermolecular forces in the ice. Once all of the ice has melted, the temperature of the water starts to rise again. When the water is boiled, the particles move so fast that they escape from the liquid state and become a gas. The temperature of the water stays constant at 100°C until all of the water has boiled. This is because the energy is being used to break the intermolecular forces in the water. Once all of the water has boiled, the temperature of the steam starts to rise again.

The complete sentences:

Page 4:

Heating curves show the temperature of a substance as it is heated. The curve has a horizontal line at the melting and boiling points, which indicates that the temperature does not change during these phase changes.

Cooling curves show the temperature of a substance as it is cooled. The curve has a horizontal line at the melting and boiling points, which indicates that the temperature does not change during these phase changes.

Both curves show that the temperature of a substance increases as it is heated and decreases as it is cooled.

A heating curve is more choppy than a cooling curve because there are more phase changes during heating than during cooling.

Find out more on matter here: https://brainly.com/question/3998772

#SPJ1

Answer:

B

Explanation:

Asteroid - A rock that rvolves arounf the sun / star.

Moon - A natural satillite that revolves around earth/ planet.

Factors that may influence the solubility of BaF₂ in an aqueous solution include the following substances: LiF, H₂SO₄, NaOH, BaCl₂, and KNO₃. (A,B,C,D)

Solubility is the ability of a solid to dissolve in a liquid to form a homogeneous mixture.

In an aqueous solution, the ability of a substance to dissolve is determined by various factors, including temperature, pressure, and the nature of the solvent and the solute. The concentration of the solute, pH, and the presence of other solutes or substances in the solution can all influence solubility.  (A,B,C,D)

The solubility of BaF₂, a sparingly soluble salt, is influenced by the presence of other substances. Lithium fluoride (LiF) and barium chloride (BaCl₂) both contain ions that could affect the solubility of BaF₂. Li⁺ and Ba²⁺, respectively, are cations, while F⁻ and Cl⁻ are anions.

When LiF or BaCl₂ is dissolved in water, their respective ions will react with the F⁻ and Ba²⁺ ions present in the BaF₂, respectively. These reactions result in the formation of LiBaF₃ and BaClF, respectively, and the BaF₂ becomes more soluble in the solution.

Similarly, NaOH and H₂SO₄ are strong electrolytes that dissociate in water to produce OH⁻ and H⁺ ions, respectively. These ions can react with the F⁻ ions in BaF₂, resulting in the formation of water and a soluble salt.

KNO₃, on the other hand, is a soluble salt that dissociates in water to produce K⁺ and NO₃⁻ ions. The presence of these ions can increase the solubility of BaF₂ in solution.

To know more about strong electrolytes click on below link:

https://brainly.com/question/2285692#

#SPJ11

Answer:

Water applied to the surface of a relatively dry soil infiltrates quickly due to the affinity of the soil particles for water. As time passes and the soil becomes wet, the force of gravity becomes the dominant force causing water to move.

Explanation:

Answer:

Gravity

Explanation:

Water applied to the surface of a relatively dry soil infiltrates quickly due to the affinity of the soil particles for water. As time passes and the soil becomes wet, the force of gravity becomes the dominant force causing water to move.

Answer:

There are three main types of recycling: primary, secondary, and tertiary.Single-stream recycling is a system in which all recyclables, including newspaper, cardboard, plastic, aluminum, junk mail, etc., are placed in a single bin or cart for recycling. ... While collections costs are lower with a single stream system, processing costs are much higher.

Explanation:

Hope it helps u

FOLLOW MY ACCOUNT PLS PLS

pH of the solution using the Henderson-Hasselbalch equationpH = pKa + log([base]/[acid + base])pKa = 10.33 + log([CO2]/[HCO3-])For NaHCO3, [CO2] = 0.0004 M and [HCO3-] = 0.2025 MFor Na2CO3, [CO2] = 0.0004 M and [HCO3-] = 0.0 pH = 10.33 + log((0.2025)/(0.0004 + 0.2025))pH = 9.25 (Answer)

Percent ionization of 0.120 MM lactic acid(Ka=1.4×10−4): Percent ionization refers to the degree of ionization of a weak electrolyte in solution. It is calculated by taking the ratio of the concentration of ionized species to the initial concentration of the compound multiplied by 100.The formula for percent ionization is:% Ionization = (concentration of H+ ions / initial concentration of lactic acid) × 100Given that, concentration of lactic acid = 0.120 MMInitial concentration of lactic acid = 0.120 MMConcentration of H+ ions = x (as lactic acid is weak electrolyte and it is assumed that x moles of lactic acid ionizes into x moles of H+ and x moles of lactate)Ka of lactic acid = 1.4×10−4Kw/Ka = 1.0×10-14/1.4×10-4 = 7.14×10^-11Now, write the expression for Ka of lactic acid and solve for x Ka = [H+][Lactate]/[Lactic acid]1.4×10^-4 = x² / (0.120 – x)x = 3.87 × 10^-3[Moles of H+]/[Initial moles of lactic acid] x 100 = Percent ionization = 3.87×10^-3/0.120 × 100 = 3.22% (Answer)B) Calculation of percent ionization of 0.120 M lactic acid in a solution containing 8.0×10−3 M M sodium lactate:Given that, concentration of lactic acid = 0.120 MConcentration of sodium lactate = 8.0×10−3 MInitial concentration of lactic acid = 0.120 – 8.0×10−3 = 0.112 MConcentration of H+ ions = x (as lactic acid is weak electrolyte and it is assumed that x moles of lactic acid ionizes into x moles of H+ and x moles of lactate)Ka of lactic acid = 1.4×10−4Kw/Ka = 1.0×10-14/1.4×10-4 = 7.14×10^-11Now, write the expression for Ka of lactic acid and solve for xKa = [H+][Lactate]/[Lactic acid]1.4×10^-4 = x² / (0.112 – x)x = 2.73 × 10^-3[Moles of H+]/[Initial moles of lactic acid] x 100 = Percent ionization = 2.73×10^-3/0.120 × 100 = 2.28% (Answer)C) Calculation of pH of a buffer that is 0.120 MM in NaHCO3 and 0.280 M in Na2CO3:Given that, concentration of NaHCO3 = 0.120 MMConcentration of Na2CO3 = 0.280 MNow, calculate the pKa of the H2CO3/HCO3- buffer system:pKa = pH + log([HCO3-]/[H2CO3])pKa = 10.33 + log(0.280/0.120) = 10.72[HCO3-]/[H2CO3] = antilog (pKa - pH) = antilog (10.72 - 10.33) = 3.65Buffer capacity (ß) = (Change in base/Change in pH) ß = (0.120 × (3.65 + 1))/(1.5 × (10^-5)) = 11680pH = pKa + log([Salt]/[Acid])pH = 10.72 + log(0.280/0.120) = 10.97Answer: 10.97D) Calculation of pH of a solution formed by mixing 65 mL of a solution that is 0.24 M in NaHCO3 with 75 mL of a solution that is 0.17 M in Na2CO3:Step 1: Calculation of moles of NaHCO3 in the first solutionMoles of NaHCO3 = Molarity × Volume (L)Moles of NaHCO3 = 0.24 × (65/1000) = 0.0156Step 2: Calculation of moles of Na2CO3 in the second solutionMoles of Na2CO3 = Molarity × Volume (L)Moles of Na2CO3 = 0.17 × (75/1000) = 0.01275Step 3: Calculation of total moles of HCO3- and CO32-Total moles of HCO3- and CO32- = Moles of NaHCO3 + Moles of Na2CO3Total moles of HCO3- and CO32- = 0.0156 + 0.01275 = 0.02835Step 4: Calculation of new concentration of HCO3- and CO32- after the two solutions are mixedNew concentration of HCO3- and CO32- = Total moles of HCO3- and CO32- / Total volume (L)Total volume = 65/1000 + 75/1000 = 0.14 LNew concentration of HCO3- and CO32- = 0.02835 / 0.14 = 0.2025 MStep 5: Calculation of pH of the solution using the Henderson-Hasselbalch equationpH = pKa + log([base]/[acid + base])pKa = 10.33 + log([CO2]/[HCO3-])For NaHCO3, [CO2] = 0.0004 M and [HCO3-] = 0.2025 MFor Na2CO3, [CO2] = 0.0004 M and [HCO3-] = 0.0 pH = 10.33 + log((0.2025)/(0.0004 + 0.2025))pH = 9.25 (Answer)

Learn more about Henderson-Hasselbalch equation here:

https://brainly.com/question/31495136

#SPJ11

The pH of the solution after the addition of .0500 M NaOH is  12.70.

Buffer solution volume of the buffer solution = 1.50LConcentration of HF = 0.250 M

Concentration of NaF = 0.250 M

After the addition of NaOH

The concentration of NaOH = 0.0500 M

Ka of HF = 3.5 × 10⁻⁴

First of all, we have to determine the moles of HF and NaF initially present in the solution.

Initial moles of HF = Molarity × Volume of solution = 0.250

M × 1.50 L = 0.375 moles

Initial moles of NaF = Molarity × Volume of solution = 0.250 M × 1.50 L = 0.375 moles

After the addition of NaOH, HF, and NaF react with NaOH to form NaF and water as shown below.

HF + NaOH → NaF + H₂O(0.250 M) (excess)(0.0500 M) -x x

molarity of NaOH = 0.0500 M - x

[NaOH] = [NaF] = (initial moles of NaF - x)/Volume of solution

= (0.375 - x)/1.50

Initial moles of NaOH = Molarity × Volume of solution = (0.0500 M - x) × 1.50 L = 0.075 - 1.50 x

Initial moles of NaF = Initial moles of NaOH(As they react in 1:1 ratio)= 0.075 - 1.50 x

Initial moles of HF = 0.375 - x

Initial concentration of HF = (0.375 - x)/1.50= (0.250 - x/6)

After the reaction, the concentration of HF and F⁻ will change by the same amount that is - x and + x respectively.

[H⁺] [F⁻]/[HF] = Ka[H⁺] [0.375 + x]/[0.250 - x/6]

= 3.5 × 10⁻⁴[H⁺]

= 3.5 × 10⁻⁴ × (0.375 + x)/(0.250 - x/6)

As the solution is a buffer solution, pH = pKa + log [F⁻]/[HF]

pKa = -log Ka

= -log 3.5 × 10⁻⁴= 3.455

pH = 3.455 + log [0.375/(0.250 - x/6)]

The value of x can be calculated by using the ICE table. The values of [H⁺] and x will be very small as the concentration of NaOH added is very less.

So, x can be neglected.

x = [OH⁻] = 0.0500 M[H⁺] = Kw/[OH⁻] = 1.0 × 10⁻¹⁴/0.0500 M

= 2.0 × 10⁻¹³pH

= -log [H⁺] = -log (2.0 × 10⁻¹³)

= 12.70 (approx)

Therefore, the pH of the buffer solution after the addition of 0.0500 M NaOH is approximately 12.70.

Learn more about the pH of the solution here:

https://brainly.com/question/15163821

#SPJ11

Answer:

A

Explanation: 11/22

During an elimination reaction in organic chemistry, a new double bond (π bond) is formed, resulting in the creation of an alkene functional group. This process involves the removal of a leaving group and the adjacent hydrogen atom from a molecule, resulting in the formation of a double bond between the two adjacent carbon atoms.

In elimination reactions, a strong base or acid is often used to abstract the proton from the adjacent carbon atom, generating a carbanion intermediate. The leaving group is then expelled from the molecule, and the carbanion intermediate undergoes a rearrangement to form a more stable carbocation. Finally, the base or another molecule acts as a nucleophile, capturing a proton from the carbocation to form the double bond. This newly formed double bond represents the alkene functional group and is characteristic of elimination reactions in organic chemistry.

Learn more about Organic chemistry here ; brainly.com/question/14623424

#SPJ11

Answer:

The reaction is exothermic

Explanation:

Answer:

is this a poem or something?

Answer:

Rice is grown in rainy regions.

The river flooded the whole region.

He explored the region around the South Pole.

Explanation:

Hope this helped!

Answer:

16 atm

Explanation: