Answer:
A
Explanation:
moving a magnet into a coil of wire in a closed circuit
Craig, move a magnet into a coil of wire in a closed circuit for the discovery of electromagnetism. Option A is correct.
What is electromagnetism ?The physical interplay of electric charges, magnetic moments, and the electromagnetic field is known as electromagnetism.
The electromagnetic field can be static, moving slowly, or forming waves.
Craig, move a magnet into a coil of wire in a closed circuit for the discovery of electromagnetism.
Hence, option A is correct.
To learn more about the electromagnetism, refer to the link;
https://brainly.com/question/3427992
#SPJ2
How sun directly overhead effects climate?
Answer:
The amount of heat energy received at any location on the globe is a direct effect of Sun angle on climate, as the angle at which sunlight strikes Earth varies by location, time of day, and season due to Earth's orbit around the Sun and Earth's rotation around its tilted axis.
Answer:
The earth's climate system depends entirely on the sun for its energy. Solar radiation warms the atmosphere and is fundamental to atmospheric composition.
Explanation:
hope this helps :)
If the sun is 400 times bigger than the moon, how couild the moon possibly cover the sun during a solar eclipse?
Explanation:
the Moon passes between Earth and the Sun Even though the Moon is much smaller than the Sun, because it is just the right distance away from Earth, the Moon can fully block the Sun's light from Earth's perspective This completely blocks out the Sun's light
Answer:
It's all about perspective. The moon is far closer to the Earth than the Sun is, so they appear roughly the same size. If they were closer to each other, then obviously the moon wouldn't be large enough to cover a substantial amount of the sun's light. But given the huge distance both between them and the moon and the earth, to us they look relatively the same.
Can you anser the two questions fast
Answer:
yes! what are the questions??
Explanation:
Describe the effect of the mass on the net force.
Answer:
F = m a
it means as m increase force increase also and acceleration is constant
the best example of this case is free fall regardless of the mass of something the free fall acceleration is constant - 9.81 m/s^2, because as mass increase gravitational force increase also
Answer:
hlw I'm jess bregoli
your answer is here (◕ᴗ◕✿)
mass is the amount of matter..Gravity affects weight, it does not affect mass.
Masses always remain the same.
Explanation:
hope it may help you
There is a bell at the top of a tower that is 45m high. The bell weighs 190N. The bell has ___________________ energy. Calculate it.
I NEED THE ANSWER PLEASE
Answer:
250mn
Explanation:
In a few sentences, describe how the thermostat utilizes a bimetallic strip in order to turn a furnace on and off in one or two sentences.
Answer:
Explanation:
Bimetallic strips are used in thermostats for measuring and controlling temperature. The strip is connected to a switch and as the temperature changes, the strip flexes and opens or closes a contact. They are also used in ovens for measuring temperature. An electromechanical thermostat typically contains either a bi-metal coil or a metal strip. When the temperature changes, this coil or strip will move, causing a vial containing mercury to tip to one side. The mercury flows to one end of the vial, signaling that the heating or cooling needs to be turned on.
Using a 100 year time frame,what is the CO2e of 1 tonne of CO2,2 tonne or methane,and 3 tonnes of nitrous oxide
Well, let's see what we've got here:
( 4⁻³ · 3⁴ · 4² ) / ( 3⁵ · 4⁻² ) .
The two simple rules of exponents that we're
going to use here are:
-- Two multiply two numbers with the same base,
add their exponents. Like (A³) · (A²) = A⁵ .
But the bases have to be the same.
-- A negative power just means it belongs in the
other section of a fraction.
A negative power on top means it belongs on the bottom.
A negative power on the bottom means it belongs on top.
Like A⁻² means 1/A² . And 1/B⁻³ means B³ .
That's all you need in order to clean up the big fraction
in the question. But in order to see where you can use
these rules, you need to re-arrange things first.
Original: ( 4⁻³ · 3⁴ · 4² ) / ( 3⁵ · 4⁻² )
Let's send the 4⁻³
to the bottom
where it belongs: ( -- 3⁴ · 4² ) / 4³ · ( 3⁵ · 4⁻² )
Not take that 4⁻² from
the bottom, and put it on
top, where it belongs: ( 4² · 3⁴ · 4² ) / 4³ · ( 3⁵ -- )
Multiply the 4²s on top: ( 4⁴ · 3⁴ ) / ( 4³ · 3⁵ )
Now let me break this up.
Not changing anything, just
writing it in a different way: ( 4⁴ / 4³ ) · ( 3⁴ / 3⁵ )
Look at the first fraction: 4⁴ / 4³ .
Divide top and bottom by 4³ , and it becomes just 4 .
Now look at the second fraction: 3⁴ / 3⁵ .
Divide top and bottom by 3⁴ , and it becomes just 1/3 .
So in the end, we're left with just 4 / 3 .
And THAT is exactly equal to the original big messy fraction
in the question. It has exactly the same numerical value, but
you'd never know it when you see it, because it's a lot simpler.
There are a lot of other ways we could have manipulated and
massaged the original fraction, but the steps are the same:
-- Multiply numbers with the same base, by adding the exponents.
-- Remember that a number with a negative exponent belongs
in the other section of the fraction, with a positive exponent.
The flow chart shows the life cycle of a star. Was this star smaller than our sun, about the same or bigger than our sun?
1. Bigger
2. About the same
3. Smaller
The star is bigger than our sun. The correct option is 1.
The flow chart of the life cycle of a star indicates that the star starts as a nebula, which is a cloud of gas and dust. The nebula can collapse due to gravitational forces and form a protostar. The protostar can then continue to contract and heat up until it reaches a temperature and density at which nuclear fusion can occur, leading to the star entering the main sequence phase.
The size of a star is determined by its mass, and the more massive a star is, the bigger it will be. Based on this information, we can infer that if a star follows the life cycle shown in the flow chart, starting from a nebula and eventually reaching the main sequence, it must be at least as massive as our sun or even more massive, since only stars with sufficient mass can become main sequence stars.
To learn about the heliocentric model of the Solar System click:
https://brainly.com/question/12075871
#SPJ2
Gold is more active than copper? A. True B. False
Answer:
false
Explanation:
sana po maktulong
A carpenter applies a force of 60N horizontally to push a plane 40 cm along a piece of wood, how much work does she do?
Answer:
W = 24 J
Explanation:
Given that,
Applied force, F = 60 N
Distance moved, d = 40 cm = 0.4 m
We need to find the work done by the carpenter. We know that,
Work done, W = Fd
Put all the values,
W = 60 N × 0.4 m
= 24 J
Hence, the required work done is equal to 24 J.
If a train traveled 400 miles north and traveled back 275 miles south and the total trip took 5 hours to complete, what was the average velocity of the train in mph?
The average velocity is 25 mph north.
Average velocity = displacement/time
Displacement =
(400 mi north) + (275 mi south)
Displacement = 125 mi north
Average V = (125 mi north) / 5 hours.
Average V = 25 mph north
A 60 kg girl on a swing is pulled 1.5 meters back and then released. The girl oscillates at pi/3 radians per second.How far from equilibrium will the girl be in 4 seconds into the motion
Answer:
-0.75 m
Explanation:
The displacement of the girl is given by x = x₀cosωt where x₀ = maximum displacement of swing = 1.5 m, ω = angular frequency = π/3 rad/s and t = time of swing = 4 s
Substituting the values of the variables into the equation, we have
x = x₀cosωt
x = (1.5 m)cos(π/3 rad/s × 4 s)
x = (1.5 m)cos(2π/3)
x = (1.5 m)cos120°
x = 1.5 m × -0.5
x = -0.75 m
So, the girl is 0.75 m to the left of the equilibrium position 4 seconds into the motion.
What is the gravitational potential energy of a 3.0-kg rock that is 12.4 m above the ground?
Answer:
Explanation:
PE = mgh where m is mass, g is the pull of gravity, and h is the height to which the object can possibly fall.
PE = 3.0(-9.8)(-12.4) so
PE = 360 J, rounded to the correct number of sig figs.
The gravitational potential energy of the rock is 362.4 joules.
What is gravitational potential energy?The gravitational potential energy of an object is given by the formula:
PE = mgh
where PE is the potential energy, m is the mass of the object, g is the acceleration due to gravity (which is approximately 9.81 m/s^2 near the surface of the Earth), and h is the height of the object above a reference point.
In this case, the mass of the rock is 3.0 kg, the height above the ground is 12.4 m, and the acceleration due to gravity is 9.81 m/s^2. Substituting these values into the formula, we get:
PE = (3.0 kg) x (9.81 m/s^2) x (12.4 m) = 362.4 J
Therefore, the gravitational potential energy of the rock is 362.4 joules.
To learn about universal gravitation constant click:
https://brainly.com/question/858421
#SPJ3
Q1. What is the mass of a ball that has a kinetic energy of16 J and it is traveling at 4 m/s?
Q2. What is the kinetic energy of a soccer ball which has a mass of 1 kg and is kicked with a velocity of 10 m/s?
Q3.exercise ball is on a table 2 m above the ground. What is the mass of the ball if it has a GPE of 40 ?
Q4.What is the gravitational potential energy (GPE) of a 2 kilogram book that is 20 meter above the ground?
Answer:
Explanation:
Kinetic Energy has a formula of
[tex]KE=\frac{1}{2}mv^2[/tex] and
Potential Energy has a formula of
PE = mgh. The first 2 problems use the KE formula and the next 2 use the PE formula.
Q1. KE = 16 and v = 4 m/s:
[tex]16=\frac{1}{2}m(4)^2[/tex] and
[tex]\frac{2(16)}{16}=m[/tex] so
m = 2 kg
Q2. mass = 1 kg and v = 10 m/s:
[tex]KE=\frac{1}{2}(1)(10)^2[/tex] so
KE = 50 J
Q3. PE = 40, h = 2, g = 9.8:
40 = m(9.8)(2) and
[tex]\frac{40}{(9.8)(2)}=m[/tex] so
m = 2.0 kg
Q4. mass = 2 kg, g = 9.8 m/s/s, h = 20:
PE = 2(9.8)(20) so
PE = 392 J
**I completely disregarded the rules for sig fig's because your numbers were very inexact**
Se tiene un péndulo cuyo frecuencia de oscilación es de 0.4 Hz. Cual sera la frecuencia de oscilacion de otro péndulo cuya longitud es el triple del anterior
Answer:
f = 0.365 Hz
Explanation:
The angular velocity of a simple pendulum is
w = [tex]\sqrt{g/L}[/tex]
angular velocity and frequency are related
w = 2π f
we substitute
2π f = [tex]\sqrt{g/L}[/tex]
Let's find the initial length of the pendulum
L = [tex]\frac{g}{4\pi^2 } \ f_o[/tex]
L₀ = [tex]\frac{9.8}{4 \pi ^2} \ 0.4[/tex]
L₀ = 0.6206 m
Indicates that the length of the chord triples
L = 3 L₀
L = 3 0.6206
L = 1.8618 m
let's find the frequency
f = [tex]\frac{1}{2\pi } \ \sqrt{\frac{9.8}{1.8618} }[/tex]
f = 0.365 Hz
pleaseeeeeee helppppp this is mah last question... thank u (. ^ ᴗ ^. )
Answer:
44.1 m
Explanation:
Consider the displacement being x:
x = (g•t²)/2
x = (9.8•3²)/2
x = (9.8•9)/2
x = 88.2/2
x = 44.1 m
Answer:
44.1 mExplanation:
that's the correct answer
HELP ME PLEAASEEE ILL MARK U THE BRAINLIEST
Answer:
D.
[tex]impulse = force \times time \\ = 60 \times 10 \times 20 \\ = 12000 \: kgm {s}^{ - 1} [/tex]
Option C: 60 mass of child/kg & 10 time / s
hope this helps :)
If you want to decrease the current created by a generator what can you do?
Answer:
To decrease the current;
1) Use fewer loops or number of turns
2) Use a lower speed of rotation of the coil in the magnetic field
3) Use a weaker magnetic
Explanation:
According to Faraday's Law of induction, which is the basis of the electromagnetism, electromagnetic induction and therefore the basis of the electric generator, can be written as follows;
[tex]\epsilon = -N \cdot \dfrac{\Delta \phi}{\Delta t}[/tex]
Where;
ε = The induced voltage
N = The number of turns (loops)
ΔФ = The change in the magnetic flux
Δt = The change in the time (the duration)
Given that voltage is directly related to the current, decreasing the voltage, decreases the current
To decrease the voltage, and therefore, the current we can;
1) Reduce the number of loops in the coil
2) Increase the time change per unit change in flux by slowing down the speed of rotation of the generator
3) Decrease the amount of change in the magnetic field per turn, by using a weaker magnetic
a cylinder has volume 50 cm and radius 4 cm find its volume. pls do it with the full process
Explanation:
Please, check the question properly
The diameter of a copper wire is thought to be approximately 0.3mm. Which instrument should be used to obtain a more accurate measurement of the diameter of the wire? A measuring tape B metre rule C micrometer D ruler 2
Answer:
C
Explanation:
The correct answer should be the micrometer.
The micrometer is an instrument that is capable of measuring the component of an object to very high precision. It is used to obtain accurate measurements in engineering.
In the case of the copper wire, the diameter of 0.3 mm was an approximation and a more accurate measure of the diameter would be obtained by using the micrometer.
The correct option is C.
A 5.00 kg pendulum swings back and forth. At the top of its arc it reaches a height of 0.36 m. What is the velocity of the pendulum at the top of the arc?
0 m/s
7.2 m/s
2.7 m/s
Answer:
Gravitational potential energy = (mass) x (gravity) x (height)
Kinetic energy (of a moving object) = (1/2) (mass) x (speed)²
When the pendulum is at the top of its swing, its potential energy is
(mass) x (gravity) x (height)
= (5 kg) x (9.8 m/s²) x (0.36 m)
= (5 x 9.8 x 0.36) joules
17.64 joules .
Energy is conserved ... it doesn't appear or disappear ... so that number is exactly the kinetic energy the pendulum has at the bottom of the swing, only now, it's kinetic energy:
17.64 joules = (1/2) x (mass) x (speed)²
17.64 joules = (1/2) x (5 kg) x (speed)²
Divide each side by 2.5 kg:
17.64 joules / 2.5 kg = speed²
Write out the units of joules:
17.64 kg-m²/s² / 2.5 kg = speed²
(17.64 / 2.5) (m²/s²) = speed²
7.056 m²/s² = speed²
Take the square root of each side: Speed = √(7.056 m²/s²) = 2.656 m/s.
Looking through the choices, we're overjoyed to see that one if them is ' 2.7 m/s '. Surely that's IT !
Hope this will help you ...
A person weighs 60 kg. The area under the foot of the person is 150 cm2. Find the pressure exerted on the ground by the person.
Answer:
Pressure = 39200 N/m²
Explanation:
Given the following data;
Mass = 60 kg
Area = 150 cm²
Conversion:
1 centimeter square = 0.0001 meter square
150 centimeter square = 150 * 0.0001 = 0.015 m²
To find the pressure exerted on the ground by the person;
Mathematically, pressure is given by the formula;
[tex] Pressure = \frac {Force}{area} [/tex]
First of all, we would determine the force exerted by the person.
Force = mass * acceleration due to gravity.
We know that acceleration due to gravity is equal to 9.8 m/s².
Substituting into the formula, we have;
Force = 60 * 9.8
Force = 588 Newton
Next, find the pressure;
[tex] Pressure = \frac {Force}{area} [/tex]
Substituting into the formula, we have;
[tex] Pressure = \frac {588}{0.015} [/tex]
Pressure = 39200 N/m²
Please help !!! anyone
The motor of a battery-powered scooter can maintain a speed of 5.3 m/s by providing a force of 280 N. What is the power output of the motor? *
Answer:
the power output P = 1484 W
Explanation:
Power P = Force× speed
Given that motor of a battery-powered scooter can maintain a speed of 5.3 m/s by providing a force of 280 N.
Therefore,the power output of the motor P = 280×5.3 = 1484 W
Hence, the power output P = 1484 W
Qué tipo de onda tiene mayor velocidad: Onda mecánica en un sólido Onda electromagnética Onda mecánica en el aire
Answer:
Onda electromagnética
Explanation:
Las ondas mecánicas requieren un medio material para la propagación, mientras que las ondas electromagnéticas no requieren un medio material para la propagación.
Generalmente, las ondas electromagnéticas se mueven con una velocidad muy alta.
Todas las ondas electromagnéticas se denominan colectivamente luz y tienen una velocidad común de 3 × 10 ^ 8 m / s en el aire.
Ninguna onda mecánica tiene una velocidad tan alta en el aire.
please helppppppp ASAP. thank u
Answer:
-9.8
Explanation:
gravity gives constant acceleration,negative for going upwards
To add to the complexity, those precious atoms face the peril of disintegrating into the void. Luckily, by now, they are feeling the influence of gravity to bring them safely together. Based on this sentence, the reader can infer that — A There was no gravity at the time of the Big Bang. B The most basic atoms were formed due to the force of gravity. C Gravity developed right after the first atoms fell apart. D The force of gravity helped collapse the newly created atoms.
Answer:
B The most basic atoms were formed due to the force of gravity.
Explanation:
Since the statement says that the atoms could have faced the peril of disintegrating into the void, this means that, they could have been destroyed by movement away into the void.
But, it also says that by now, they are feeling the influence of gravity to bring them safely together. This statement shows that gravity brings them (the atoms) together and thus doesn't allow them disintegrate into the void.
So, a reader can thus infer that the most basic atoms were formed due to the force of gravity since it doesn't allow the atoms disintegrate into the void.
So, B is the answer.
A test car and its driver, with a combined mass of 600 kg, are moving along a straight,horizontal track when a malfunction causes the tires to stop rotating. The car skids to a halt with constant acceleration, leaving skid marks on the road during the whole time it skids. Which two of the following measurements, taken together, would allow engineers to find the total mechanical energy dissipated during the skid?
A. The length of the skid marks
B. The contact area of each tire with the track.
C. The coefficent of static frction between the tires and the track.
D. The coefficent of static frction between the tires and the track.
Answer:
The two of the following measurements, when taken together, would allow engineers to find the total mechanical energy dissipated during the skid
B. The contact area of each tire with the track.
C. The co-efficent of static friction between the tires and the track.
D. The co-efficent of static friction between the tires and the track.
Explanation:
Which variable is represented by the following symbol? λ
a. Wavelength
b. Amplitude
c. Frequency
d. Velocity
Answer:
A
Explanation:
Wavelength is represented by lambda
Someone HELP if the displacement is in the start and it ends in the same spot then would It be 0?
Answer:
Yes
Explanation:
Displacement is equal to the final position of X minus the initial position of X.