Dawn is in a chemistry lab. She has container of a chemical. The chemical formula for the substance is on the label. Dawn measured a small portion of the mass on a balance beam. What will she need to do to find the number of moles in the substance?

Answer: The speed of the wave is 5.307 meters per second.

Explanation: The speed of a wave can be calculated using the equation:

speed = wavelength / period

Substituting the given values:

speed = 69 m / 13 s

Simplifying:

speed = 5.307 m/s

identify the reagents needed for the given transformation. The correct order of reagents is:
1. NBS/δ
2. [tex]NaOCH^2CH^3[/tex]
3. TsCl, pyr
4. t-BuOK
5. NBS/δ
6. [tex]CH^3CH^2OH[/tex], 25°C
7. HBr
8. t-BuOK
9. [tex]H^2SO^4[/tex]

To accomplish the transformation, follow these steps:

Step 1: Use NBS/δ for allylic or benzylic bromination.
Step 2: Perform a nucleophilic substitution with [tex]NaOCH^2CH^3[/tex] to replace the bromine.
Step 3: Convert the alcohol to a tosylate using TsCl and pyridine.
Step 4: Perform an elimination reaction using t-BuOK to form an alkene.
Step 5: Brominate the alkene using NBS/δ.
Step 6: Perform a nucleophilic substitution with [tex]CH^3CH^2OH[/tex] at 25°C to replace the bromine with an alcohol.
Step 7: Add HBr to form a bromoalkane.
Step 8: Use t-BuOK to perform an elimination reaction, forming an alkene.
Step 9: Add [tex]H^2SO^4[/tex] to perform an acid-catalyzed hydration, creating an alcohol.

To know more about "Nucleophilic substitution " refer here:

https://brainly.com/question/29910163#

#SPJ11

If an ideal gas expands at a constant temperature of 300 k from 0.50 to 4.0 l and the gas does 250 j of work, then there are approximately 0.0379 moles of gas in this scenario.

To determine the number of moles of gas in this scenario, we can use the formula for work done by an ideal gas at constant temperature, which is derived from the combined gas law: W = -nRT ln(V2/V1)

where W is the work done, n is the number of moles, R is the gas constant (8.314 J/mol·K), T is the temperature, V1 is the initial volume, and V2 is the final volume.

We are given:
W = 250 J
T = 300 K
V1 = 0.50 L
V2 = 4.0 L
R = 8.314 J/mol·K

First, let's find ln(V2/V1):

ln(4.0 L / 0.50 L) = ln(8)

Now, we can rearrange the formula to solve for n:

n = -W / (RT ln(V2/V1))

Plugging in the given values:

n = -250 J / (8.314 J/mol·K × 300 K × ln(8))

n ≈ 0.0379 moles

There are approximately 0.0379 moles of gas in this scenario.

Visit here to learn more about moles  : https://brainly.com/question/26416088
#SPJ11

The pH of the solution is approximately 0.87, and the pOH is approximately 13.13.

To calculate the pH and pOH of the aqueous solution containing 0.050 M HCl(aq) and 0.085 M HBr(aq) at 25°C, we'll first determine the total concentration of H+ ions in the solution, since both HCl and HBr are strong acids and completely dissociate in water.

Total H+ concentration = [HCl] + [HBr] = 0.050 M + 0.085 M = 0.135 M

Next, we'll use the formula for pH:

pH = -log10([H+])

pH = -log10(0.135) ≈ 0.87

Now, to find the pOH, we'll use the relationship between pH and pOH at 25°C:

pH + pOH = 14

0.87 + pOH = 14

pOH ≈ 13.13

Thus, the pH of the solution is approximately 0.87, and the pOH is approximately 13.13.

Know more about pH here:

https://brainly.com/question/491373

#SPJ11

The following equation can be used to determine the equilibrium constant (Keq) for this reaction: Keq is equal to [SO3]2/[SO2][O2].

Since the concentration of SO3 in this situation is 0.250M at equilibrium, the Keq value is calculated as 0.2502 / (0.500 x 0.400) = 0.4.

Given that the Keq value is more than 1, this indicates that the reaction is marginally biassed in favour of the products.

Learn more about equilibrium at:

https://brainly.com/question/30694482

#SPJ1

The amount of copper deposited at the cathode is directly proportional to the amount of electricity passed through the solution. From the given mass of copper deposited, we can calculate the amount of electricity passed using

Faraday's law

:

moles of electrons = mass of substance / molar mass * number of electrons transferred

For copper, the number of

electrons

transferred is 2, so the moles of electrons passed is:

2.00 g / 63.55 g/mol * 2 = 0.0629 moles of electrons

Since the reaction at the anode is the oxidation of water to oxygen gas:

2 H2O(l) → O2(g) + 4 H+(aq) + 4 e-

The number of moles of oxygen gas produced is half the number of moles of

electrons

passed:

0.0629 / 2 = 0.0315 moles of O2

Therefore, 0.0315 moles of

oxygen

gas were produced at the anode during the same

time period

.

Learn more about

Anode

here:- brainly.com/question/17109743

#SPJ11

The pH of the buffer solution that contains 1.8 g of NH₄Cl in 250 mL of 0.12 M NH₃ solution is 9.13. This pH is lower than the pH of the 0.12 M ammonia solution since the buffer contains both a weak base and its conjugate acid.

To determine the pH of a buffer solution containing 1.8 g of NH₄Cl in 250 mL of 0.12 M NH₃ solution, we need to calculate the concentrations of NH₃ and NH₄⁺ and then use the Henderson-Hasselbalch equation.

1. Calculate moles of NH₄Cl: (1.8 g) / (53.49 g/mol) = 0.0337 mol
2. Calculate the concentration of NH₄⁺: (0.0337 mol) / (0.25 L) = 0.1348 M
3. Use the Henderson-Hasselbalch equation: pH = pKa + log([A⁻]/[HA])
4. Convert Kb for NH₃ (1.8 x 10⁻⁵) to pKa for NH₄⁺: pKa = -log(Kw/Kb) = 9.25
5. Insert the concentrations into the equation: pH = 9.25 + log(0.12/0.1348) = 9.13

The pH of the buffer solution is 9.13. The pH of the 0.12 M ammonia solution would be higher than the buffer solution since the buffer contains both a weak base and its conjugate acid, which helps resist changes in pH.

Learn more about Henderson-Hasselbalch equation here: https://brainly.com/question/26746644

#SPJ11

For the reaction 2A(g)⇌B(g)+2C(g), the Value of Kp is equal to [tex]4.3 * 10^{-4[/tex].

Kp is known as the equilibrium constant in terms of partial pressures. For the given reaction, Kp can be calculated by taking the product of the equilibrium partial pressures of the products (PB and PC²) and then dividing by the product of the initial partial pressure of the reactant (PA) raised to the power of its stoichiometric coefficient. Substituting the given values in this expression gives the value of Kp as

Kp = (PB PC²) / PA² =  [tex]4.3 * 10^{-4[/tex].

Learn More about reactions

https://brainly.com/question/11231920

#SPJ4

The correct values of the gas constant R are:

a. 0.08206 L-atm/K-mol
d. 1.987 cal/mol-K
e. 8.314 J/K-mol

The gas constant is the constant of proportionality that connects the temperature scale, the amount-of-substance scale, and the energy scale in physics. The gas constant is symbolized by the symbol R and is stated in terms of units of energy per degree increase in temperature per mole. Avogadro constant NA multiplied by Boltzmann constant k (or kB) yields the gas constant R:

R = NA*k

Option a. 0.08206 L-atm/K-mol, d. 1.987 cal/mol-K, e. 8.314 J/K-mol; These values are the most commonly used gas constants in various units. The other options (b and c) do not represent the gas constant.

Learn more about  gas constant: https://brainly.com/question/30757255

#SPJ11

By considering the concentrations of these two species as well as the p K an of the weak acid, the Henderson-Hasselbalch equation enables you to determine the pH of a buffer solution that comprises a weak acid and its conjugate base.

Hypochlorous acid (HClO), in your situation, is the weak acid. One of its salts, potassium hypochlorite, or KClO, introduces the hypochlorite anion, the conjugate base of the compound, into the solution.Make an educated guess as to what the solution's pH will be in relation to the acid's p K a before performing any calculations. Be aware that the log term will equal zero if the weak acid and conjugate base concentrations are equal.

To know more about Henderson-Hasselbalch, click here:

brainly.com/question/13423434

#SPJ4

While using TLC (Thin Layer Chromatography) to monitor reaction progress, the Rf (Retention Factor) value can help indicate the position of the product and reactant on the TLC plate.

In the case of converting borneol to an amorphous product, the Rf value for the amorphous product is likely to be higher than the Rf value for borneol. This is because amorphous products generally have lower polarity than borneol, causing them to travel further up the TLC plate and resulting in a higher Rf value.

To know more about Rf values, click below.

https://brainly.com/question/30640980

#SPJ11

in the two trials, there were 0.00531 moles and 0.00513 moles of HCl present in the 25 mL HCl solution, respectively.

To find the moles of HCl present in the two trials, we'll first find the moles of NaOH used in each trial and then use the stoichiometry of the reaction between HCl and NaOH to determine the moles of HCl.
The balanced chemical equation for the reaction between HCl and NaOH is:
HCl(aq) + NaOH(aq) → NaCl(aq) + H₂O(l)
Since the reaction has a 1:1 stoichiometry, the moles of HCl will be equal to the moles of NaOH.
Now, let's find the moles of NaOH in each trial:
Moles = Molarity × Volume (in liters)
Trial 1:
Moles of NaOH = 0.18 M × (29.50 mL / 1000) = 0.00531 moles
Trial 2:
Moles of NaOH = 0.18 M × (28.50 mL / 1000) = 0.00513 moles
Now, we know that the moles of HCl are equal to the moles of NaOH in each trial.
Trial 1:
Moles of HCl = 0.00531 moles
Trial 2:
Moles of HCl = 0.00513 moles
So, in the two trials, there were 0.00531 moles and 0.00513 moles of HCl present in the 25 mL HCl solution, respectively.

learn more about solutions

https://brainly.com/question/30665317

#SPJ11

The partial pressure of a component gas in a mixture is the pressure that gas would exert if present alone in the vessel at the same temperature as that of the mixture. Here the partial pressure of oxygen is 0.21 atm.

The pressure exerted by a mixture of two or more non-reacting gases enclosed in a definite volume is equal to the sum of the partial pressures of the component gases.

Here 21% O₂ = 0.21

Partial pressure of a gas = Mole fraction of the gas × Total pressure

Total pressure = 1 atm

So partial pressure of O₂ = 0.21 × 1 = 0.21 atm

To know more about partial pressure, visit;

https://brainly.com/question/19250510

#SPJ1

The chemical potential varies with temperature and pressure because these factors influence the internal energy, entropy, and volume of the system, which are all related to the chemical potential.

The chemical potential is the measure of the potential energy change of a system when a small amount of a substance is added. It depends on various factors, including temperature and pressure.

a.) Temperature: The chemical potential varies with temperature because it is related to the internal energy and entropy of the system. As the temperature increases, the kinetic energy of the particles in the system also increases.

This leads to higher internal energy and entropy, which in turn affects the chemical potential. The relationship between chemical potential (μ), internal energy (U), and entropy (S) can be represented by the equation:

μ = (dU/dN) - TS
where N represents the number of particles and T is the temperature.

b.) Pressure: The chemical potential also varies with pressure due to its relationship with volume (V) and the number of particles (N). When the pressure of a system increases, the volume typically decreases, leading to a change in the chemical potential.

The relationship between chemical potential, volume, and pressure can be represented by the equation:
μ = (dU/dN) + PV

In summary, the chemical potential varies with temperature and pressure because these factors influence the internal energy, entropy, and volume of the system, which are all related to the chemical potential.

To know more about chemical potential click here:

https://brainly.com/question/31100203

#SPJ11

The reason why the halogenated acetanilide 5 must be transformed into the amine 6 before introducing iodine into the ring is because amide groups are less activating than amino groups. This means that amide groups are less able to donate electrons to the ring, which is important for the reaction with iodine.

When iodine is introduced into the ring, it forms an iodonium ion (1") which is highly electrophilic, meaning it is attracted to electron-rich molecules. The amino group in the amine 6 is more electron-rich than the amide group in the halogenated acetanilide 5, which makes it a better target for the iodonium ion (1").

In summary, transforming the halogenated acetanilide 5 into the amine 6 before introducing iodine into the ring is important because the amine group is more activating than the amide group, which makes it more susceptible to reaction with the highly electrophilic iodonium ion (1").
Hi! In order to introduce iodine into the ring, halogenated acetanilide 5 must be transformed into the amine 6 because of the differences in activating power and electrophilicity.

Amine groups (like in compound 6) are stronger activating groups than amide groups (like in compound 5). This means that the amine group can more effectively donate electron density to the aromatic ring, making it more nucleophilic and thus more reactive towards electrophilic aromatic substitution reactions.

The iodonium ion (1") is an electrophilic species. Due to the higher activating power of the amino group, the amine 6 is more susceptible to electrophilic attack by the iodonium ion, facilitating the introduction of iodine into the ring.

In summary, transforming halogenated acetanilide 5 into amine 6 enhances the reactivity of the aromatic ring towards electrophilic aromatic substitution by increasing the activating power, allowing for the successful introduction of iodine through the electrophilic iodonium ion (1").

Learn more about  halogenated acetanilide here;

https://brainly.com/question/14800378

#SPJ11

The carbon-oxygen double bond in COCl2 (phosgene) can best be described as a covalent bond.

The carbon-oxygen double bond in COCl2 (phosgene) is formed by the sharing of two pairs of electrons between the carbon and oxygen atoms, making it a covalent bond. Covalent bonds occur when two atoms share electrons to form a stable molecule. In a double bond, as found in COCl2, two pairs of electrons are shared between the atoms, making it a stronger bond with a higher bond energy than a single bond. The carbon and oxygen atoms in COCl2 are both highly electronegative, which means they strongly attract electrons towards themselves. This leads to a polar covalent bond where the electrons are not shared equally, resulting in a partially negative oxygen atom and a partially positive carbon atom. The strength of this bond is an essential factor in the chemical properties and reactivity of COCl2.

Know more about Covalent Bond here:

https://brainly.com/question/19382448

#SPJ11

When an alkali metal (a) and a halide (b) react, they form the salt ab. When this salt is dissolved in water, it dissociates into its constituent ions, as shown in the chemical equation: ab (s) → a⁺ (aq) + b⁻ (aq)

This equation represents the dissociation of the ionic solid ab in water. In this reaction, the solid salt ab breaks down into its constituent ions, with the alkali metal (a) forming a positively charged ion (a⁺) and the halide (b) forming a negatively charged ion (b⁻).

The resulting solution contains these ions in aqueous form, surrounded by water molecules that stabilize and solvate the ions. This dissociation process is what makes ab a soluble salt in water, and it is a fundamental process for many chemical reactions that involve ionic compounds.

To know more about chemical equation, refer here:
https://brainly.com/question/19626681#
#SPJ11

To calculate the molarity of the solution, we need to first determine the number of moles of methanol present. We know that the density of the solvent does not change upon dissolving methanol in it, so the volume of the solvent remains the same.

Therefore, we can assume that the volume of the solution is equal to the volume of the solvent, which is .

Next, we need to calculate the mass of methanol present. Assuming that the density of methanol is , we can use the formula density = mass/volume to find the mass of methanol present. Solving for mass, we get:

mass of methanol = density x volume x mole fraction of methanol

Since we know that the molar mass of methanol is , we can calculate the number of moles of methanol present:

moles of methanol = mass/molar mass

Now, we can calculate the molarity of the solution using the formula:

molarity = moles of solute/volume of solution in liters

To calculate the molality of the solution, we need to use the mass of the solvent, which is:

mass of solvent = density x volume

Using the formula for molality:

molality = moles of solute/mass of solvent in kg

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ11

Hi! I'd be happy to help you draw the structure of methionine at [tex]pH_{2}[/tex]. Since I cannot physically draw the structure here, I will provide you with a step-by-step explanation of how to draw it yourself:

1. First, draw the amino acid's central carbon (alpha carbon).
2. Attach an amino group ([tex]NH^{3+}[/tex]) to the alpha carbon. Since the pH is 2, which is acidic, the amino group will be protonated and positively charged.
3. Attach a carboxyl group (COOH) to the alpha carbon. At [tex]pH_{2}[/tex], the carboxyl group will not be deprotonated and will remain neutral.
4. Attach a hydrogen atom (H) to the alpha carbon.
5. Attach the R-group (side chain) of methionine to the alpha carbon. Methionine has a nonpolar side chain consisting of a [tex]CH_{2}[/tex] group connected to a  [tex]CH_{2}[/tex]  group, followed by a sulfur atom (S) and a methyl group ( [tex]CH_{3}[/tex] ).
So, the final structure at [tex]pH_{2}[/tex] will have a protonated amino group ([tex]NH^{3+}[/tex]), a neutral carboxyl group (COOH), and a nonpolar side chain specific to methionine.

To know more about the protonated amino group:

https://brainly.com/question/4679991

#SPJ11

The condition that H₂ must be under to be in corresponding states with CO₂ is at a temperature of approximately 43.6 K and a pressure of approximately 1.77 bar.

To find the condition when H₂ is in a corresponding state to CO₂ at 400 K and 10.0 bar, we'll use the reduced temperatures and pressures. Reduced temperature (Tr) and reduced pressure (Pr) can be calculated using the critical temperature (Tc) and critical pressure (Pc) with the following formulas:

Tr = T / Tc
Pr = P / Pc

For CO₂, Tr_CO₂ = 400 K / 304.2 K ≈ 1.315 and Pr_CO₂ = 10.0 bar / 73.7 bar ≈ 0.136.

Now, we need to find the conditions for H₂, where Tr_H₂ = Tr_CO₂ and Pr_H₂ = Pr_CO₂:

Tr_H₂ = T_H₂ / 33.2 K = 1.315 => T_H₂ ≈ 43.6 K
Pr_H₂ = P_H₂ / 13.0 bar = 0.136 => P_H₂ ≈ 1.77 bar

So, H₂ is in a state corresponding to CO₂ at 400 K and 10.0 bar when it is at a temperature of approximately 43.6 K and a pressure of approximately 1.77 bar.

Learn more about corresponding state here: https://brainly.com/question/15223242

#SPJ11

Chemical energy is the energy stored in the chemical bonds of a substance, like biodiesel. Energy density refers to the amount of energy stored per unit of volume or mass, and it is used to compare the performance of different fuels. Fuel efficiency is the ability of a fuel to produce useful work or energy from a given amount of mass or volu

a) Chemical energy refers to the potential energy stored in the bonds between atoms in a substance. Energy density, on the other hand, is the amount of energy stored per unit volume or mass of a substance. Fuel efficiency is the ratio of the amount of energy produced by a fuel to the amount of energy input into the system. In general, fuels with higher chemical energy and energy density tend to have higher fuel efficiency because they are able to produce more energy per unit of fuel used.

b) Not necessarily. While a higher heat of combustion for a fuel indicates that there is more energy available in the fuel, it does not necessarily mean that the fuel is more efficient. Other factors such as the combustion process, engine design, and energy losses due to friction and heat transfer can also impact fuel efficiency. Additionally, the type of fuel and its compatibility with the engine can also affect efficiency. Therefore, it is important to consider all of these factors when determining the overall efficiency of a fuel.

Learn more about Chemical here:

https://brainly.com/question/30970962

#SPJ11

In this case, we have Q = 2.31 and the equilibrium constant K for the reaction is not given. Without the value of K, we cannot determine the direction in which the reaction will proceed to reach equilibrium.

The reaction between NO2 and N204 is:
2NO2(g) ⇌ N204(g)

To determine if the system is at equilibrium, we need to calculate the reaction quotient Q. The expression for Q is:
Q = [N204]^2 / [NO2]^2
where [N204] and [NO2] are the molar concentrations of the respective species at any given time.

Using the given pressures and the ideal gas law, we can convert the pressures to molar concentrations:
[N204] = (7.00 atm) / (0.08206 L·atm/mol·K × 298 K) = 0.323 M
[NO2] = (5.00 atm) / (0.08206 L·atm/mol·K × 298 K) = 0.232 M

Substituting these values into the expression for Q, we get:

Q = (0.323 M)^2 / (0.232 M)^2 = 2.31

Since Q ≠ K, where K is the equilibrium constant for the reaction, the system is not at equilibrium. Specifically, Q is greater than K, which means the reaction has not yet proceeded far enough to reach equilibrium.

To determine which way the reaction will proceed to reach equilibrium, we need to compare Q and K. The reaction quotient Q gives us information about the direction in which the reaction must proceed to reach equilibrium. If Q > K, the reaction must proceed in the reverse direction to reach equilibrium. If Q < K, the reaction must proceed in the forward direction.

To learn more about equilibrium visit;

https://brainly.com/question/30807709

#SPJ11

The system's enthalpy and entropy indicators can be used to categorise phase shifts. As opposed to entropy, which measures a system's disorder or randomness, enthalpy measures the heat energy in a system.

A material turns from a liquid to a solid during freezing. As a result of melting, a substance returns to its liquid state. A substance condenses when it goes from being a gas to a liquid. It turns from a liquid to a gas during vaporisation.

Solids, liquids, and gases are the three different states of matter that exist in everyday life. Solids have set shapes and volumes and are comparatively rigid. A solid is something like a rock. In contrast, liquids, like a beverage in a can, have set volumes but flow to take on the shape of their containers.

To know more about entropy visit:-

https://brainly.com/question/13999732

#SPJ1

The overall δg°' of the coupled reaction when phosphoenolpyruvate is used to make ATP is -31.5 kJ/mol.

To determine the overall ΔG°, standard Gibbs free energy change, of the coupled reaction when phosphoenolpyruvate hydrolysis is coupled with ATP synthesis, you will need to consider the ΔG°' values of both the hydrolysis of phosphoenolpyruvate (PEP) and the synthesis of ATP.

Step 1: Find the ΔG°' values for the individual reactions
- Hydrolysis of PEP: ΔG°' = -61.9 kJ/mol
- Synthesis of ATP: ΔG°' = +30.5 kJ/mol

Step 2: Add the ΔG°' values of both reactions
Overall ΔG°' = (-61.9 kJ/mol) + (+30.5 kJ/mol)

Step 3: Calculate the overall ΔG°'
Overall ΔG°' = -31.4 kJ/mol

So, when phosphoenolpyruvate is used to make ATP, the overall ΔG°' of the coupled reaction is -31.4 kJ/mol.

Learn more about Gibbs free energy: https://brainly.com/question/13765848

#SPJ11

Rounding off to one decimal place, the answer is -29.5 kJ. Therefore, the correct option is (B) -29.5.

What is Heat Reation?

A heat reaction, also known as a thermochemical reaction, is a chemical reaction that involves the release or absorption of heat. It is characterized by a change in the enthalpy of the system, which is the sum of the internal energy of the system plus the product of the pressure and volume of the system.

The given reaction releases energy and the enthalpy change is -118 kJ. We need to calculate the heat (in kJ) associated with the complete reaction of 18.2 grams of HCl (aq).

First, we need to find the number of moles of HCl:

Molar mass of HCl = 1 g/mol (atomic mass of H) + 35.5 g/mol (atomic mass of Cl) = 36.5 g/mol

Number of moles of HCl = mass / molar mass = 18.2 g / 36.5 g/mol = 0.4986 mol

According to the balanced chemical equation, 2 moles of HCl produce -118 kJ of energy. Therefore, 0.4986 moles of HCl will produce:

= (-118 kJ / 2 mol) x 0.4986 mol

= -29.47 kJ

Learn more about Heat Reation from the given link

https://brainly.com/question/29415878

#SPJ1

In the Bohr model of the one-electron atom, the electron travels in fixed orbits around the nucleus, which are also called stationary states or energy levels. The Bohr model predicts that the radius.

 these orbits is proportional to the principal quantum number n, which is a positive integer that determines the energy level of the electron. Specifically, the radius of the nth Bohr orbit is given by:

r_n = a_0 * n^2 / Z

where a_0 is the Bohr radius (a fundamental physical constant), Z is the nuclear charge (equal to the atomic number), and n is the principal quantum number.

From this equation, we can see that the radii of the Bohr orbits increase as the principal quantum number n increases. This means that electrons in higher energy levels are further away from the nucleus atom and have more energy.

On the other hand, the radius of the Bohr orbits decreases as the nuclear charge Z increases. This is because a larger nuclear charge attracts the electron more strongly, pulling it closer to the nucleus and reducing the size of the orbit. Thus, for a given principal quantum number n, the Bohr radius decreases as Z increases.

Learn more about  atom   here:

https://brainly.com/question/30898688

#SPJ11

To calculate the partial pressure of krypton in the gas mixture, we need to use the mole fraction of krypton and the total pressure of the mixture. First, we need to convert the mass percentages of nitrogen.

krypton to their respective mole fractions. The molar mass of nitrogen is 28.02 g/mol, and the molar mass of krypton is 83.80 g/mol. Using these values, we can calculate the mole fraction of krypton as follows:

Mole fraction of krypton = (mass fraction of krypton / molar mass of krypton) / [(mass fraction of nitrogen / molar mass of nitrogen) + (mass fraction of krypton / molar mass of krypton)]

[tex]= (0.248 / 83.80) / [(0.752 / 28.02) + (0.248 / 83.80)]= 0.062[/tex]

Next, we use the ideal gas law to calculate the partial pressure of krypton. The ideal gas law is given by:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Assuming constant temperature and volume, we can write:

P_krypton = X_krypton * P_total

where P_krypton is the partial pressure of krypton, X_krypton is the mole fraction of krypton, and P_total is the total pressure of the gas mixture.

Substituting the values we calculated, we get:

P_krypton = 0.062 * 857 mmHg

Therefore, the partial pressure of krypton in the gas mixture is 53.17 mmHg (rounded to two decimal places).

Learn more about  nitrogen   here:

https://brainly.com/question/16711904

#SPJ11

To react of 2.0 moles of Fe, 1.21024 1.2 10 24 formula components of [tex]CuSO_{4}[/tex]C u S O 4 were also required.

Why we make use of moles rather than masses?

Because atoms, molecules, or other particles are so small, it takes a lot to ever even weigh them, which is why chemists use the term "mole." Remember that when you've got a mole of it, not all of it weighs the same.

What is an illustration of a mole?

It can be measured through utilizing an atomic weight from periodic table and expressing it in grams. For eg, iron Fe has an atomic weight of 55.845 u, so its g atomic mass would be 55.845 g.

To know more about mole visit :

brainly.com/question/26416088

#SPJ1

The equilibrium constant (K') for equation (I) is 0.0021 and the equilibrium constant (K") for equation (II) is 217156.

The equilibrium constant (K) for the reaction Fe₃⁺(aq) + SCN⁻(aq) ⇌ FeSCN₂⁻(aq) is 466.

(I) FeSCN₂⁺(aq) ⇌ Fe₃⁺(aq) + SCN⁻(aq)

The reverse reaction of equation (I) is equal to the forward reaction of the given reaction. Therefore, the equilibrium constant (K') for the given reaction can be calculated by taking the reciprocal of K as follows:

K' = 1/K = 1/466 = 0.0021

(II) 2FeSCN₂⁺(aq) ⇌ 2Fe₃⁺(aq) + 2SCN⁻(aq)

The equilibrium constant (K") for the given reaction can be calculated by multiplying the equilibrium constant of the reaction (I) by itself as follows:

K" = K² = (466)² = 217156

Therefore, the equilibrium constant (K') for equation (I) is 0.0021 and the equilibrium constant (K") for equation (II) is 217156.

Learn more about Equilibrium constant

brainly.com/question/31321186

#SPJ11

The approximate ratio of densities of liquids to gases is around 1000:1. This means that on average, liquids are about 1000 times denser than gases. For example, water has a density of 1000 kg/m3 while air has a density of around 1.2 kg/m3.
The approximate ratio of the densities of liquids to gases can be found by comparing the densities of water and air. Water has a density of about 1,000 kg/m³, while air has a density of approximately 1.2 kg/m³. Therefore, the ratio of the densities of liquids to gases is roughly 1,000:1.2, or approximately 833:1 when simplified.

Density is a physical property of matter that describes the amount of mass per unit volume of a substance. It is usually expressed in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³). The formula for density is:

Density = Mass / Volume

where mass is the amount of matter in an object, and volume is the space occupied by that matter. Density can help to identify and compare different substances since each substance has a unique density value.

Visit here to learn more about density brainly.com/question/29775886

#SPJ11