Answer:
ALU :An arithmetic logic unit (ALU) is a digital circuit used to perform calculations and logic operations
Registers:register holds the address of memory where CPU wants to read or write data.
CU:The control unit (CU) is a component of a computer's central processing unit (CPU) that directs the operation of the processor.
BIU:BIU takes care of all data and addresses transfers on the buses for the EU like sending addresses, fetching instructions from the memory, reading data from the ports and the memory as well as writing data to the ports and the memory.
Cache:Cache is used to temporarily hold instructions and data that the CPU is likely to reuse.
FPU:A floating-point unit (FPU, colloquially a math coprocessor) is a part of a computer system specially designed to carry out operations on floating-point numbers.
Explanation:
This is all I can say
Screenwriters would be least involved in planning which type of film?
This question is incomplete; here is the complete question:
Screenwriters would be least involved in planning which type of film?
A. Mystery
B. Historical fiction
C. Documentary
D. Adventure
The answer to this question is C. Documentary
Explanation:
The role of screenwriters is to create different elements in a film including the dialogues between the characters, the actions or events that occur, and even the general story that is told. Due to this, screenwriters play an essential role in fiction based films which include genres such as historical fiction, adventure, science fiction, etc.
However, screenwriters are less involved in genres such as documentaries because the purpose of documentaries is to show reality, this implies there are no fictional characters or one fictional story playwriters should create.
Answer:
b: documentary
Explanation:
edg2021
______was developed as an interim management protocol with OSI as the ultimate network management protocol.
Answer:
Simple Network Management Protocol
Explanation:
Simple Network Management Protocol otherwise referred to as SNMP is a form of computer protocol that is mainly used in obtaining and regulating information relating to connected gadgets. It is practically based on the internet and was originally planned as an interim protocol.
Hence, it can be concluded that the Simple Network Management Protocol was developed as an interim management protocol with OSI as the ultimate network management protocol.
Suppose you own a travel agency in a large city. You have many corporate clients, but growth has slowed somewhat Some long-term employees are getting discouraged, but you feel that there might be a way to make technology work in your favor. Use your imagination and suggest at least one strength, weakness, opportunity, and threat that your business faces.
Explanation:
For any business or organisation, a strategic planning is a road map leading to a successful future. SWOT planning and analysis makes contribution to that strategic planning processes by identifying the various labor, technical and financial resources. SWOT stands for --
S - Strength
W - Weakness
O - Opportunity
T - Threat
One such strength of our business is we have a great and commendable employee retention.
Weakness is that we have not utilize technology properly to attract the customers. Also we need to update to our software.
An opportunity is that we can explore many technological solutions for the problems that causes growth issues. Also we can be the first in the niche market to use such technologies thus attracting customers.
And a threat is that we adapting to changing internet and as well as technology climate can lead to our business failing.
At its most basic level, data is stored as binary numbers.
O False
O True
Answer: Binary numbers
Hope this helps!
(Please mark Brainliest!)
Answer:
True
Explanation:
How many fixes are available for Adobe Photoshop CS4 (64 Bit)?
Answer:
There are three (3) fixes in adobe cs4.
Explanation:
Adobe photoshop cs4 is a version of the creative cloud's professional graphic applications used to edit pictures, design interfaces, make graphical illustrations, draw and animate the drawings, etc.
It can be installed in several computer operating system platforms like linux, mac and windows. The adobe photoshop cs4 doesn't support the windows installation and might run into several issues. There are other issues in other supported platforms, but unlike for windows, there are three fixes for these problems.
In which architecture is the application logic usually on the client side?
Answer:
two-tier architecture
Explanation:
A two-tier architecture is a term often used in computer operation, that describes a form of software architecture that comprises a presentation tier or window outlook that operates from the client-side, while on the server-side, a data outlook or data configuration is saved. An example is platform architecture.
Hence, two-tier architecture is a form of architecture in which the application logic is usually on the client-side
Which of the following type of online advertising intermediaries decide the placement and pricing of online display ads by using the supply and demand of the ad landscape in a real- time auction process?
a. Ad networks
b. Retargeters
c. Content publishers
d. Data providers
e. Ad exchanges
Answer:
e. Ad exchanges
Explanation:
The ad exchange is a form of an online strategy that promotes the transaction of media advertising inventory from numerous ad networks. Here, prices for the inventory are defined through the supply and demand in a real-time auction system.
Hence, in this case, the correct answer is that the type of online advertising intermediaries is generally referred to as Ad Exchanges.
A type of online advertising intermediaries that can be decided ivia placement and pricing of online display ads is Ad Exchangers.
What is an ad exchanger?An ad exchange is known to be a type of technology methods that is often used when buyers and sellers tries to connect so that they can sell and purchase ad goods.
Note that it is the one that acts as a middleman in the advertising transaction means that exit between supply side platforms (SSPs) (publishers) and demand side platforms (DSPs) (brands).
Learn more about Ads from
https://brainly.com/question/1658517
Assign searchResult with a pointer to any instance of searchChar in personName.
#include
#include
int main(void) {
char personName[100] = "Albert Johnson";
char searchChar = 'J';
char* searchResult = NULL;
/* Your solution goes here */
if (searchResult != NULL) {
printf("Character found.\n");
}
else {
printf("Character not found.\n");
}
return 0;
}
Answer:
Here it the solution statement:
searchResult = strchr(personName, searchChar);
This statement uses strchr function which is used to find the occurrence of a character (searchChar) in a string (personName). The result is assigned to searchResult.
Headerfile cstring is included in order to use this method.
Explanation:
Here is the complete program
#include<iostream> //to use input output functions
#include <cstring> //to use strchr function
using namespace std; //to access objects like cin cout
int main() { // start of main() function body
char personName[100]; //char type array that holds person name
char searchChar; //stores character to be searched in personName
char* searchResult = nullptr; // pointer. This statement is same as searchResult = NULL
cin.getline(personName, 100); //reads the input string i.e. person name
cin >> searchChar; // reads the value of searchChar which is the character to be searched in personName
/* Your solution goes here */
searchResult = strchr(personName, searchChar); //find the first occurrence of a searchChar in personName
if (searchResult != nullptr) //if searchResult is not equal to nullptr
{cout << "Character found." << endl;} //displays character found
else //if searchResult is equal to null
{cout << "Character not found." << endl;} // displays Character not found
return 0;}
For example the user enters the following string as personName
Albert Johnson
and user enters the searchChar as:
J
Then the strchr() searches the first occurrence of J in AlbertJohnson.
The above program gives the following output:
Character found.
Check
Which tasks can a user accomplish by using the Find and Replace feature of Word? Check all that apply.
changing the size of the page
changing the case of a word
changing the spelling of a word
changing the margins of the page
changing a word to another word
Answer:
B,C,E :)
Explanation:
Answer:
B, C, E is the correct answer
Explanation:
edge2021
Which guidelines should be used to make formatting tasks more efficient?
Answer:
Use pasted text only; this does not keep the original formatting.
Explanation:
Hope wants to add a third use at the end of her
nitrogen list.
What should Hope do first?
f
What is Hope's next step?
Answer:
Put her insertion point at the end of the item 2b.
Press the enter key.
Explanation:
When you're formatting in excel 2013 there are basically three levels of formatting, put the
three levels in order of top to bottom levels
Answer:
The answer is "themes, styles, and direct formatting".
Explanation:
The selection of regular colors, font color, or type effects is also known as the Themes. There are many built-on Excel categories accessible mostly on page layout menu: an overview of its impact on the workbook could be accessed via a topic. You may find which various fonts will affect the design of your workbook. The style of a column is indeed a defined collection of layout tools like font and font color, numbers, cell borders, and cell shading. The range of cell styles incorporated, that can be added or modified. It could also alter or double a cell template to build your customizable cell model. To use a customized format it includes the font, color, borders, etc. It is the direct formatting for the document at a certain time and anywhere. It selects the cell and starts changing the font from the font drop list to modify the font of its current document.Write a Python program that prints your name, CS classes taken (or other relevant experience), and the date on separate lines. Use one variable each for the month, day, and year (3 total). Make sure there are no spaces between the forward slash and numbers. Submit the .py file. Sample Run: My name is Steven Allbee I have taken CS 10 - Python Programming Today's date is 1/17/19
Answer:
The program in Python is as follows:
name = input("Name: ")
course = input("Course: ")
month = input("Month: ")
day = input("Day: ")
year = input("Year: ")
ddate = (month+"/"+day+"/"+year).replace(" ", "")
print("My name is ",name)
print("I have taken ",course)
print("Today's date is ",ddate)
Explanation:
This line prompts user for name
name = input("Name: ")
This line prompts user for course classes taken
course = input("Course: ")
This line prompts user for month
month = input("Month: ")
This line prompts user for day
day = input("Day: ")
This line prompts user for year
year = input("Year: ")
This line calculates the date and remove all blank spaces
ddate = (month+"/"+day+"/"+year).replace(" ", "")
The next three lines print the user inputs
print("My name is ",name)
print("I have taken ",course)
print("Today's date is ",ddate)
A(n) _____ is a common output device for hard copy.
a. laser printer
b. optical character reader
c. plasma display
d. compact disc
Which type of input peripheral is most prevalent in a Point of Sale system?A. External USB storage.
B. Card reader.
C. Thermal receipt printer.
D. Projector.
Answer:
B. Card reader.
Explanation:
The point of sale system is the point where the customer purchased the product and at the same time they given the money so here the time and place should be recorded also the retail transaction is also completed. Here it represents the amount in an invoice prepared by the store and also presents the varies of options for payment through which the customer could choose it
basically it is the place where the products is purchased and the payment is made along with it the taxes are also applicable
So in the given situation, the option B is correct as it derives the input peripheral
The type of input peripheral that is most prevalent in a Point of Sale (POS) system is a: B. Card reader.
What is an input peripheral?An input peripheral can be defined as an electronic device that is typically designed and developed for sending data to a computer system such as a Point of Sale (POS). Thus, it is used for entering data (information) into a computer system.
The examples of input peripherals.In Computer technology, some examples of input peripherals include the following:
MouseScannerMicrophoneKeyboardCard readerA card reader is a type of input peripheral that is used in a Point of Sale (POS) system to receive payments in e-commerce stores or markets, especially by inserting or swiping a credit card in the Point of Sale (POS) system.
Read more on input peripheral here: https://brainly.com/question/5430107
chemical reaction to metal
Answer:
Metals can react with water, acid and oxygen. The reactivity of the metal determines which reactions the metal participates in.
Explanation:
In general, acids react with metals to give salt and release hydrogen gas. In general, bases do not react with metals and release hydrogen gas.When metals react with other substances, the metal atoms lose electrons to form positive ions .
In real-world environments, once the domains that are affected by the risks are identified, subsequent next steps would include:______.
Answer:
Explanation:
In real-world environments, once the domains that are affected by the risks are identified, subsequent next steps would include selecting, implementing, and testing controls to minimize or eliminate those risks.
What are some options available when inserting an address block? Check all that apply. previewing postal code full address label margins matching fields company name paragraph formatting
Answer:
A. previewing
B. postal code
C. full address
E. matching fields
F. company name
Answer: A, B, C, E, F
Explanation:
Your welcome :)
Anna wants to keep information secure from offenders. Which software should she install on her computer to ensure Internet safety?
O A database software
OB
presentation software
OC. anti-virus software
OD
graphics software
Anna wants to keep information secure from offenders. Which software should she install on her computer to ensure Internet safety?
O A database software
OB
presentation software
OC. anti-virus software
OD
graphics software
Answer: OC
Image below please help
Answer:
Open original documentPlace cursorHighlight textCtrl+CSwitch to new documentCtrl+VWrite an algorithm to settle the following question:
A bank account starts out with $10,000. Interest is compounded monthly at 6 percent per year (0.5 percent per month). Every month, $500 is withdrawn to meet college expenses. After how many years is the account depleted?
Here is what I got so far. Can you tell if I am on the right track.
Step 1 Start with the table:
Month Balance
0 $10,000.00
Step 2 Repeat steps 2a, 2b, 2c while the balance is greater than $0.00
Step 2a. Add a new row to the table.
Step 2b. In column 1 of the new row, labeled "Month", put one more than the preceding month value.
Step 2c. In column 2 of the new row, labeled "Balance", place the value of this formula
b * (1 + 0.005) - 500
where b is the preceding balance value.
Step 3 Read the last number in the month column (let's call it months). Report that the account will be depleted in (months / 12) years and (months % 12) months.
Answer:
algorithm
original = float(raw_input("Enter initial balance: "))
interest = float(raw_input("Enter promised return: "))
expenses = float(raw_input("Enter monthly expenses: "))
interest = interest / 100 / 12
month = 0
balance = original
if balance * interest - expenses >= 0:
print "You don't need to worry."
else:
while balance + balance * interest - expenses >= 0: # negation of the if condition
balance = balance + interest * balance # in one month
balance = balance - expenses
month = month + 1
print month, balance
print month / 12, "years and", month % 12, "months"
Which XP practice prescribes that "the code [always be] written by two programmers at one machine"?.
Answer:
Pair Programming
Explanation:
In Extreme Programming XP, pair programming is a practice in which two programmers work together in a pair at one machine, when writing a code.
One of the two programmers is called the "driver" or developer who writes the code and supervises all the changes made to the program.
The other one is called an "navigator" or observer who provides ideas on how the program should be written, observes or reviews it the program, identify the issues or errors in the code, help in code simplifications.
The two developers implements the program, do coding, review the program and check each other's work. They both are required to be equally skilled in order to implement and test the code. This improves the process of the software development. By working in a pair and reviewing and testing the code together, they develop a better code.
What is the full form of computer
Answer:
Computer is not an acronym, it is a word derived from a word "compute" which means to calculate. Some people say that COMPUTER stands for Common Operating Machine Purposely Used for Technological and Educational Research.
Which of the following is usually used to connect a monitor to a computer?
O DVI cable
O USB cable
O Ethernet cable
O SATA cable
Answer:
Ethernet cable
Explanation:
this is because you usually use a ethernet cable at schools , offices and even at home so ya tell me if im wrong
The DVI cable is usually used to connect a monitor to a computer option (A) DVI cable is correct.
What is a computer?A computer is a digital electronic appliance that may be programmed to automatically perform a series of logical or mathematical operations. Programs are generic sequences of operations that can be carried out by modern computers.
The Digital Display Working Group created the digital video interface known as DVI (Digital Visual Interface) (DDWG).
It is frequently found on computers, LCD monitors, projectors, and other digital display devices.
It supports both digital and analog video signals via a single DVI connection.
Thus, the DVI cable is usually used to connect a monitor to a computer option (A) DVI cable is correct.
Learn more about computers here:
brainly.com/question/21080395
#SPJ2
how many bits do you need to count up to 30 help please
Answer:
5
Explanation:
2⁵ = 32, so that fits.
In general, to calculate the number of bits without guessing, you can take the 2 log of the number and then round up:
[tex]\log_2 30 \approx 4.9[/tex]
rounded up gives 5.
In this assignment, you will write a Python 3.x program to calculate the length of the hypotenuse (side C) of a right triangle, given the lengths of the other two sides (A & B) as provided by the user. The program will also calculate the area of the triangle and the perimeter (the sum of the three sides). Other specifications: WRITE THE CODE FOR THE ANSWER.
Answer:
Explanation:
from math import hypot #import hypot for finding the hypotenuse
a = int(input("Enter a value for a: " )
b = int(input("Enter a value for b: " )
def find_hypotenuse(a,b):
return hypot(a,b) #find the hypotenuse
def find_area(a,b):
return 0.5 * a * b #calculate the area
def find_perimeter(a,b):
return a + b + find_hypotenuse(a,b) #calculate the perimeter
print("the hypotenuse is :", find_hypotenuse(a,b))
print("the area is :", find_area(a,b))
print("the perimeter is :", find_perimeter(a,b))
5. What happens when more than one keyword appears in a string? Consider the string "My mother has a dog but no cat." Explain how to prioritize responses in the reply method. Did this impact any changes you made to the getResponse method?
Answer:
Please see below
Explanation:
When this is the case, the prioritizing will be done on the basis of whichever keyword came first in the string - it is that particular method that will be called. Hence, if you wish to prioritize the method available for pets over the method available for family, you will need to place it as such in the source code - and this is how the getResponse method will be impacted.
What must you do in Disk Management so that File Explorer can recognize and use a new hard disk?
Answer: Create a new Volume/Partition
Explanation:
Typically, you want to make sure your drive is formatted and create a new volume span containing your drive space. For your PC to recognize the drive, it must be connected via SATA power and data. If it doesn't detect the drive otherwise, check if it has drivers installed in Device Manager. Go through the partition wizard to format your drive and mount a letter. After that it should be usable upon completion.
Which of the following is considered a basic task in the context of computer operations? a. Connecting to the Internet b. Natural language processing c. Word processing d. Logical operations
Answer:
The answer is "Option d".
Explanation:
The performing function into the computer is made up of three basic functions, that are: logical, arithmetical, and memory processes, in which the logical process or function is a particular symbol or expression, that links two or more knowledge sentences, and the incorrect choices can be explained as follows:
In Option a, It is wrong because it can't provide the basic tasks.In Option b, It an algorithm, that's why it is incorrect.In Option c, It is a software, which is used to provide editing on text, that's why it is incorrect.A task which is considered as a basic task in the context of computer operations is: D. Logical operations.
What is a computer?A computer can be defined as an electronic device that is designed and developed to receive data in its raw form as an input and processes these data into an output (information) that could be used by an end user.
In Computer technology, the basic task in the context of computer operations are broadly classified into three (3) categories and these include the following:
Arithmetical operations.Memory processes.Logical operations.Read more on computer here: brainly.com/question/959479
All of the data stored and transmitted by digital devices is encoded as bits.A. TrueB. False
Answer:
A. True
Explanation:
A digital device is an electronic device that has the ability and capability to receive, store, process and transmit data to another device.
Since the processing device in the digital device understands only zeros and ones which are binary numbers (also called bits), transmission and storage of data in these devices should be encoded in bits.
Examples of digital devices are;
i. flash drives
ii. mobile phones
iii. speakers
iv. printers
v. scanners