Answer:
hola espero que mi respuesta ayude
Explanation:
The concentration of hydroxide ion (-OH) in 1.37 x10^-5 m solution of Ba(OH)2 is calculated as follows
write the equation for dissociation of Ba(OH)2
Ba(OH)2 = Ba^2+(aq) + 2OH^-(aq)
by use of mole ratio between Ba(OH)2 to OH^- which is 1:2 the concentration of OH^- = 2x ( 1.37 x10^-5) = 2.74 x10^-5 M
plzzzzzzzz helpppp
The half-life of a radioactive isotope is 2.4 minutes. If you started with 100.0 grams, how many grams would be left after 7.2 minutes has elapsed? Explain how you arrived at your answer.
Answer:
12.5grams would remain after time has elapsed
Determine the highest occupied energy level in the
following elements:
a. He
b. Be
c. Al
d. Ca
e. Sn
1. One atom contains 29 protons and 34 neutrons. Another atom of the same element has a mass number of 65. How many protons and neutrons does this unknown atom have?
A. 28 protons, 37 neutrons
b. 29 protons, 36 neutrons
C. 29 protons, 35 neutrons
D. 31 protons, 34 neutrons
Answer:
b
Explanation:
because its the atom of the same element, the no of protons doesn't change but the mass number changes so we can find the mass number by:
(mass number = atomic no/no of protons + no of neutrons)
here;
mass number given = 65
and we know, no of protons = 29
let no of neutrons = x
hence,
65 = 29 + x
x= 65 – 29
x= 36
hence your answer is b
225 million km to seconds
Answer:
You can't convert km to seconds because they are different units.
This is my class group-work with my friends but we are stuck on this question.
Explanation:
It has to be C, because Carbon can bond with four other atoms and is like a four-hole wheel.
(Sorry if my elplanation was kinds choppy Oof, helpfully it makes sense?)
So if you take an egg and cook it, is it still a baby chicken?
When the egg first forms it's only one cell, and is fertilized as it moves down the oviduct to be laid
__________________________________________________________
this point it's technically an embryo : though it doesn't look like a baby chick
___________________________________________________________
o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0
the atomic number is the same as the number of which subatomic particle?
Melting gold with other metals makes 10-karat gold. Which term best describes 10-karat gold?
compound
homogeneous mixture
heterogeneous mixture
pure substance
Answer:
I think its a homogeneous mixture (pls correct me if im wrong)
Explanation:
It is a homogeneous mixture because its an alloy made of gold, silver, copper, and other metals that are melted together. A homogeneous mixture is composed of a uniform composition of particles.
There are two types of mixture, one is homogeneous mixture and other is heterogeneous mixture. Therefore, the term best describes 10-karat gold is homogeneous mixture.
What is mixture?When two or more compounds are combined but each ingredient retains its chemical identity, the result is referred to as a mixture. In other words, there is no chemical interaction between the parts of a combination. According to how consistent they are and how well the components' particle sizes match up, mixtures are categorized.
Because it is an alloy comprised of melted gold, silver, copper, and other metals, it is a homogenous combination. A homogeneous mixture has a consistent distribution of its constituent particles.
Therefore, the term best describes 10-karat gold is homogeneous mixture.
To know more about mixture, here:
https://brainly.com/question/12160179
#SPJ2
PLEASE HELP ME I NEED HELP
Answer:
5 moles S x (36.02 g S/mole S) = 180.1 grams of S
Explanation:
The periodic table has mass units for every element that can be correlated with the number of atoms of that element. The relationship is known as Avogadro's Number. This number, 6.02x[tex]10^{23}[/tex] , is nicknamed the mole, which scientists found to be a lot more catchy, and easier to write than 6.02x[tex]10^{23}[/tex]. The mole is correlated to the atomic mass of that element. The atomic mass of sulfur, S, is 36.02 AMU, atomic mass units. But it can also be read as 36.02 grams/mole.
This means that 36.02 grams of S contains 1 mole (6.02x[tex]10^{23}[/tex]) of S atoms.
This relationship holds for all the elements. Zinc, Zn, has an atomic mass of 65.38 AMU, so it has a "molar mass" of 65.38 grams/mole. ^5.38 grams of Zn contains 1 mole of Zn atoms.
And so on.
5.0 moles of Sulfur would therefore contain:
(5.0 moles S)*(36.02 grams/mole S) = 180.1 grams of S
Note how the units cancel to leaves just grams. The units are extremely helpful in mole calculations to insure the correct mathematical operation is done. To find the number of moles in 70 g of S, for example, we would write:
(70g S)/(36.02 grams S/mole S) = 1.94 moles of S. [Note how the units cancel to leave just moles]
(b) at 400k both compounds are gases. at this temperature, which compound, ch4(g) or ccl4(g), behaves more like an ideal gas? justify your answer, including reasoning about both molecules.
CH4 has more ideal gas behavior than CCl4 due to its higher intermolecular interaction.
We must note that ideal gases have minimal interaction with each other. Hence, in deciding which gas has ideal gas behavior, we have to consider the gas that has the least degree of intermolecular interaction.
However, the both gases contain nonpolar molecules but CCl4 has a greater molecular mass and has more intermolecular interaction than CH4 hence CH4 has greater ideal gas behavior than CCl4.
Learn more about ideal gas: https://brainly.com/question/8711877
Large networks of ators covalently bonded together are called:
a) Giant covalent structures
b) Molecular structures
c) Giant ionic lattices
d) Superconductors
Answer:
Giant Covalent Structures, Diamond and Graphite are giant covalent structures since they're allotropes of Carbon.
Answer:
Giant covalent structures contain very many atoms. , each joined to adjacent atoms by covalent bonds. The atoms are usually arranged into giant regular lattices - extremely strong structures because of the many bonds involved.
Particulate Electrical Forces Unit Test for Connexus, Chemistry A
I've already finished the questions, but im stuck on the written parts 16-18, can anyone give a hand? :(
I’m sorry no one helped you with those questions. But could you please be a doll and give me the answer for the multiple-choice questions 1-15. Pleaseee I’m so desperate.?
how does ionization energy increase on the periodic table
[tex]\huge \bf༆ Answer ༄[/tex]
The trends showing increase in ionization energy on the periodic table ~
Ionization energy increases as we move from left to right in a period.[ due to increase in effective nuclear charge ]
Ionization energy increases as we move from bottom to top in a group.[ Due to decrease in number of shells ]
Ionization energy increases across a period from left to right in the periodic table.
Ionization energyIonization energy is the energy needed for the complete removal of valence electrons in its ground state from an isolated atom in its gaseous phase at a specified temperature to form an ion.
Ionization energy shows periodicity in that it shows a regular variation across a period and down a group in the periodic table.
Ionization energy increases across a period from left to right in the periodic table.
Learn more about ionization energy at: https://brainly.com/question/1445179
The atomic mall mass is an element depends upon the.
Answer:
Mass and relative abundance of each isotope of that element
The atomic mass of element has been dependent on mass of each isotopes and their abundance in nature.
The atomic mass has been the mass of neutrons and protons of the element. There has been the presence of the isotopes of the elements, with varying abundance, and varying atomic masses.
The atomic mass of the element has been the relative average atomic mass of the element with respect to the mass of the isotopes and their percent abundance.
The average atomic mass (amu) has been given by:
[tex]amu=M_1A_1\;+\;M_2A_2[/tex]
Where, [tex]M_1A_1[/tex] has been the atomic mass and abundance of isotope 1.
[tex]M_2A_2[/tex] has been the atomic mass and abundance of isotope 2.
Thus, the average atomic mass has been dependent on mass of each isotopes and their abundance in nature.
For more information about the atomic mass, refer to the link:
https://brainly.com/question/5566317
Tell me What is an element?
Answer:
Any substance that cannot be decomposed into simpler substances by ordinary chemical processes.
Another definition:
An element is the simplest pure substance which can neither be split nor built up from other simpler substances by chemical reaction
Helppppppppppppppppppppppppppppp
Answer:
A or B but im going to say A
Explanation:
hope this helped <3
how many atoms of mercury are in 50.15 g of mercury?
Answer:
please mark brainliest
Explanation:
The correct answer to this question is 0.2500 mol
Formula to calculate moles:
Moles = mass ÷ molar mass (n=m/M)
Mass = 50.15g
Atomic mass: 200.59 amu
Moles = 50.15g/200.59
= 0.2500 mol.
how to tell if an electron will make a cation or anion
The barometric pressure in Breckenridge, Colorado (elevation 9600 ft) is 580 mmHg. How many kPa is this?
Answer:
1 atmospheric pressure = 760.0 mm Hg
Thus 580 mm Hg = (580 mm Hg/(760 mm Hg/atm))
= 0.763 atm
which of the following substances is most soluble in water
a). table salt
b). baking soda
c). Epsom salt
d). table sugar
Answer:
Table salt
Explanation:
Is most soluble in water
dose any body know 2(-3+6)=
______
3
Answer: The answer is 6
1) Simplify -3+6 to 3.
2×3
And then Simplify.
6
Sorry if im wrong
Identify the total number of molecules in the chemical formula: 6CH4 a 6 b 10 c 24 d 30
Answer: A.6
Explanation:
The total number of molecules in the chemical formula is 6
What is a molecule?
Molecules are the smallest particle of a substance that has all of the physical and chemical properties of that substance. Molecules are made up of one or more atoms.
The correct form of question will be:-6 molecule of methane CH₄
6CH4
a) 6 c) 10 c) 24 d) 30⇒ Number of aton of carbon is 6
⇒Number of atom of hydrogen is 24
⇒Total number of atom is 30
What is an atom ?
An atom is a particle of matter that neither be created nor be destroyed. An atom consists of a central nucleus that is usually surrounded by one or more electrons. Each electron is negatively charged. The nucleus is positively charged, and contains one or more relatively heavy particles known as protons and neutrons.
Learn more about molecules here: https://brainly.com/question/26044300
#SPJ2
Welcome to my attic. I'm positive
that there are a lot of metals in
here.
Answer:
Gold Iron Titanium Lithium
Explanation:
state one cause of temporary hardness of water
Answer:
Temporary hardness of water is caused when thermally unstable chemicals like magnesium hydrogen carbonate and calcium hydrogen carbonate are dissolved in water. Temporary hardness is treated by heating the hard water.
Hope that helps. x
The main-group elements are the forty-four elements that occupy groups 1A-8A of the periodic table. Main-group elements are important because of their high natural abundance both in the Earth's crust and in the human body and are commercially valuable. Review the families containing main group elements. Identify all the characteristics that apply to the elements in family IA.
Answer:
The answer is a,b, and c. This is for the USA tesprep videos
Explanation:
The characteristics that apply to the elements in the family are they are highly reactive, they are shiny, soft metals and the element form +1 ions when forming compounds. Thus option a, b and c is correct.
What are main group elements?Main group elements are defined as any of the element belonging to the s and p blocks of the periodic table.
They are most abundant element in universe and on earth.
This elements and their compound are one of the most important economical elements.
They are very good conductor of heat and electricity.
Thus, the characteristics that apply to the elements in the family are they are highly reactive, they are shiny, soft metals and the element form +1 ions when forming compounds. Thus option a, b and c is correct.
To learn more about main group elements, refer to the link below:
https://brainly.com/question/5460947
#SPJ5
which type of bonding is found in all substances made up of molecules?
Answer:
Chemical bonds
Explanation:
Chemical bonds are forces that hold atoms together to make compounds or molecules. Chemical bonds include covalent, polar covalent, and ionic bonds. Atoms with relatively similar electronegativities share electrons between them and are connected by covalent bonds.
Carbon-12 contains 6 protons and 6 neutrons and electrons. which subatomic particle, if charged, would change identity of the elements.
A. proton
B. neutron
C. electron
D. all of the elements
Consider the reaction below. H2PO4â€"" H2O Right arrow. H3O HPO42â€"" Which of the following is a baseâ€""conjugate acid pair? H2O and H3O H2O and H2PO4â€"" H2PO4â€"" and HPO42â€"" H2PO4â€"" and H3O.
Taking into account the Brønsted-Lowry acid-base theory, a base/conjugate acid pair is H₂O/H₃O⁺.
The Brønsted-Lowry acid-base theory (or the Brønsted-Lowry theory) identifies acids and bases based on whether the species accepts or donates protons or H⁺.
According to this theory, acids are proton donors while bases are proton acceptors. That is, an acid is a species that donates an H⁺ proton while a base is a chemical species that accepts an H⁺ proton from the acid.
So, reactions between acids and bases are H⁺ proton transfer reactions, causing the acid to form its conjugate base and the base to form its conjugated acid by exchanging a proton.
In other words, a conjugate base is an ion or molecule resulting from the acid that loses the proton, while a conjugate acid is an ion or molecule resulting from the base that gains the proton:
acid + base ⇄ conjugate base + conjugate acid
In this case, you know:
H₂PO₄ + H₂O → H₃O⁺ + HPO₄⁻
H₂PO₄ behaves like acid because donates an H⁺ proton while H₂O behaves like base because accepts an H⁺ proton from the acid.
So, H₃O⁺ is the conjugate acid of the H₂O and HPO₄⁻ is conjugate base of H₂PO₄.
In summary, a base/conjugate acid pair is H₂O/H₃O⁺.
Learn more about the Brønsted-Lowry acid-base theory:
https://brainly.com/question/12916250?referrer=searchResultshttps://brainly.com/question/1191429?referrer=searchResultshttps://brainly.com/question/4000152?referrer=searchResultshttps://brainly.com/question/12808135?referrer=searchResultsCalculate the following examples.
1. Ramji conducted an experiment in the field related to the rate of percolation. He observed that it took 30 minutes for 600 ml of water to percolate through the soil. Calculate the rate of percolation per hour.
2. Jigna takes 50g of dry powdered soil in a filter paper and slowly adds water to the soil from a 100 ml fully filled measuring cylinder. When water starts dripping from the filter paper, 60 ml of water is left in the measuring cylinder. Find out the percentage of water absorbed by the soil.
Answer:
12ml per hour and
69% LOL
1) The rate of percolation would be 0.33 ml/s
Percolation rate = volume of water/time
= 600/1800s
= 0.33 ml/s
2) The percentage of water absorbed would be 40%
Percentage of water absorbed = amount absorbed/total water x 100
amount of water absorbed = 100 - 60
= 40 ml
total amount of water = 100 ml
Percentage of water absorbed = 40/100 x 100
= 40%
More on numerical calculations can be found here; https://brainly.com/question/24638543?referrer=searchResults
how many pounds of gold are present in 1 cubic mile of seawater?
Answer:
38 pounds of gold in cubic mile of seawater.