You need a sample size of approximately 10,875 to construct a 90% confidence interval with a margin of error of 0.4 and a standard deviation of 36.
To determine the sample size (n) needed to construct a 90% confidence interval for estimating the population mean, given a standard deviation (σ) of 36 and a margin of error of 0.4, you can use the formula:
[tex]n = (Z * σ / E)^2[/tex]
where:
n = sample size
Z = Z-score corresponding to the desired confidence level (90%)
σ = standard deviation (36)
E = margin of error (0.4)
For a 90% confidence interval, the Z-score is 1.645. Now, plug in the values into the formula:
n = (1.645 * 36 / 0.4)^2
n ≈ 10874.09
Since sample size should be a whole number, round up to the nearest whole number: n ≈ 10875.
So, you need a sample size of approximately 10,875 to construct a 90% confidence interval with a margin of error of 0.4 and a standard deviation of 36.
To learn more about standard deviation, refer below:
https://brainly.com/question/23907081
#SPJ11
Use the Laplace transform to solve the given initial-value problem.
y'' -17y' + 72y = u(t-1), y(0) = 0, y'(0) = 1
The differential equation
To solve this initial value problem using Laplace transform, we first need to take the Laplace transform of both sides of the differential equation:
[tex]$$\mathcal{L}\left\{y^{\prime \prime}\right\}-17 \mathcal{L}\left\{y^{\prime}\right\}+72 \mathcal{L}\{y\}=\mathcal{L}\{u(t-1)\}$$[/tex]
Using the properties of Laplace transform, we have
[tex]$$s^2 Y(s)-s y(0)-y^{\prime}(0)-17[s Y(s)-y(0)]+72 Y(s)=\frac{e^{-s}}{s}$$[/tex]
Substituting the initial conditions, we get
[tex]$$s^2 Y(s)-s(0)-1-17[s Y(s)-0]+72 Y(s)=\frac{e^{-s}}{s}$$[/tex]
Simplifying the equation, we get
[tex]$$\begin{aligned}& s^2 Y(s)-17 s Y(s)+72 Y(s)=\frac{e^{-s}}{s}+1 \\& Y(s)\left(s^2-17 s+72\right)=\frac{e^{-s}}{s}+1 \\& Y(s)=\frac{e^{-s}}{s\left(s^2-17 s+72\right)}+\frac{1}{s^2-17 s+72}\end{aligned}$$[/tex]
Now, we need to use partial fraction decomposition to express the first term in terms of simpler fractions:
[tex]$$\frac{e^{-s}}{s\left(s^2-17 s+72\right)}=\frac{A}{s}+\frac{B s+C}{s^2-17 s+72}$$[/tex]
Multiplying both sides by the denominator, we get
[tex]$$e^{-s}=A\left(s^2-17 s+72\right)+s(B s+C)$$[/tex]
Substituting [tex]$\$ s=0 \$$[/tex], we get[tex]$\$ A=1 / 72 \$$[/tex]. To find $\$ B \$$ and [tex]$\$ C \$$[/tex], we can equate the coefficients of [tex]$\$$[/tex] s [tex]$\$$[/tex] and [tex]$\$ s^{\wedge} 2 \$$[/tex] on both sides:
[tex]$$\begin{aligned}& -A(17)+B=0 \\& A(72)-B(17)+C=0\end{aligned}$$[/tex]
Substituting the value of [tex]$\$ A \$$[/tex], we get [tex]$\$ \mathrm{~B}=-1 / 12 \$$[/tex] and [tex]$\$ \mathrm{C}=1 / 6 \$$[/tex]. Therefore, we can write
[tex]$$\frac{e^{-s}}{s\left(s^2-17 s+72\right)}=\frac{1}{72 s}-\frac{1}{12\left(s^2-17 s+72\right)}+\frac{1}{6} \cdot \frac{1}{s-9}$$[/tex]
Substituting this in the expression for [tex]$Y(s)$[/tex], we get
[tex]Y(s)=\frac{1}{72 s}-\frac{1}{12\left(s^2-17 s+72\right)}+\frac{1}{6} \cdot \frac{1}{s-9}+\frac{1}{s^2-17 s+72}[/tex]
Using the inverse Laplace transform, we can find the solution to the differential equation:
To learn more about Laplace transform visit:
https://brainly.com/question/31481915
#SPJ11
compute the products in exercises 1-4 using (a) the definition, as in example 1, and (b) the row-vector rule for computing ax. if a product is undefined, explain why
If we have a matrix C with dimensions 2x3 and a matrix D with dimensions 2x2, we cannot multiply them together because the number of columns in C does not match the number of rows in D. Therefore, the product CD is undefined.
To compute the products in exercises 1-4 using the definition, we need to use the formula for matrix multiplication, which is:
(A x B)ij = Σk=1n Aik x Bkj
where A and B are matrices, i and j are indices, and n is the number of columns in A (which is also the number of rows in B).
For example, let's say we have two matrices:
A = 1 2
3 4
B = 5 6
7 8
To compute the product using the definition, we would do:
(AB)11 = (1 x 5) + (2 x 7) = 19
(AB)12 = (1 x 6) + (2 x 8) = 22
(AB)21 = (3 x 5) + (4 x 7) = 43
(AB)22 = (3 x 6) + (4 x 8) = 50
So the product AB is:
AB = 19 22
43 50
To compute the products using the row-vector rule for computing ax, we need to write the matrices as row vectors and the vectors as column vectors. Then, we can use the formula for computing the dot product:
a . x = Σi=1n aixi
where a and x are vectors, i is an index, and n is the length of the vectors.
For example, let's say we have a matrix A and a vector x:
A = 1 2
3 4
x = 5
6
To compute the product using the row-vector rule, we would write the matrix A as two row vectors:
a1 = 1 2
a2 = 3 4
And we would write the vector x as a column vector:
x = 5
6
Then, we can compute the products as follows:
(Ax)1 = a1 . x = (1 x 5) + (2 x 6) = 17
(Ax)2 = a2 . x = (3 x 5) + (4 x 6) = 39
So the product Ax is Ax = 17 39
If a product is undefined, it means that the matrices or vectors cannot be multiplied together. For example, if we have a matrix A with dimensions 2x3 (2 rows and 3 columns) and a matrix B with dimensions 3x2 (3 rows and 2 columns), we can multiply them together using the definition of matrix multiplication. However, if we have a matrix C with dimensions 2x3 and a matrix D with dimensions 2x2, we cannot multiply them together because the number of columns in C does not match the number of rows in D. Therefore, the product CD is undefined.
Learn more about Matrix here,
https://brainly.com/question/1279486
#SPJ11
mark these probabilities on a probabilities scale:
A.passing an exam2/3
Probabilities scale with the probability of passing an exam marked at 2/3 is given:
What is probability scale?A probability scale is a number line that shows the probabilities of events occurring. The scale ranges from 0 to 1, where 0 represents an impossible event and 1 represents a certain event.
According to given information:Draw a number line from 0 to 1, representing all possible probabilities.Mark 0 at the far left end of the line, representing impossible events.Mark 1 at the far right end of the line, representing certain events.Divide the line into equal segments, representing equal probabilities.Find the point that represents 2/3 probability and mark it on the line.Using these steps, we can mark 2/3 probability on the scale at a point that is two-thirds of the distance between 0 and 1. This point would be closer to 1, indicating that passing the exam is a likely event.
Here is a probabilities scale with the probability of passing an exam marked at 2/3:
To know more about probability visit:
https://brainly.com/question/23286309
#SPJ1
This chart shows a sequence of causes and effects in how banking can affect society. Complete the chart by selecting the correct word.
First
Second
Third
Fourth
Fifth
Sixth
Seventh
Eighth
The Fed reduces interest rates.
Banks will make (more or fewer?) loans.
The money supply (increases or decreases?).
People and businesses are (more or less) likely to spend and borrow money.
The number of jobs will (decrease or increase?).
People will buy (more or fewer?) cars, homes, and fun stuff.
Growth of the economy speeds up.
Inflation will (decrease or increase?).
The banking industry serves as both a source of credit and a source of money for the populace. The bank will make more loans if the interest rates are lowered.
Why do interest rates exist?
The amount of the loan that is charged to the borrowers as interest on an annual percentage basis is known as the interest rate.
If the Fed lowers interest rates, the bank will make more loans and the amount of money available will rise.
The company's borrowing and spending will increase, creating new job opportunities. More home and car purchases will occur as a result of rising income and employment, among other factors.
As a result, the economy will grow and the rate of inflation will drop.
Learn more about interest rates here:
https://brainly.com/question/13324776
#SPJ1
(4x − 9y) da, d is bounded by the circle with center the origin and radius 4 d
The value of the double integral (4x − 9y) dA over the region D bounded by the circle with center at the origin and radius 2 is -48.
To evaluate the double integral (4x − 9y) dA over the region D bounded by the circle with center at the origin and radius 2, we need to use polar coordinates.
In polar coordinates, the equation of the circle with center at the origin and radius 2 is given by r = 2. Therefore, the limits of integration for r are 0 and 2, and the limits of integration for θ are 0 and 2π.
The element of area in polar coordinates is given by dA = r dr dθ. Therefore, we can rewrite the double integral in terms of polar coordinates as follows
∬D (4x − 9y) dA = ∫₀² ∫₀²π (4r cosθ - 9r sinθ) r dθ dr
= ∫₀² r² (4cosθ - 9sinθ) dθ dr [Using the properties of integrals]
The integral with respect to θ is zero for sinθ and cosθ over a full period. Therefore, we have
∬D (4x − 9y) dA = ∫₀² r² (4cosθ - 9sinθ) dθ dr
= 4∫₀² r² cosθ dθ dr - 9∫₀² r² sinθ dθ dr
Integrating with respect to θ, we get
∫₀² r² cosθ dθ = [2r² sinθ]₀²π = 0
∫₀² r² sinθ dθ = [-2r² cosθ]₀²π = 4r²
Substituting these values in the original equation, we get
∬D (4x − 9y) dA = 4∫₀² r² cosθ dθ dr - 9∫₀² r² sinθ dθ dr
= 4(0) - 9(4r²) dr
= - 36 ∫₀² r² dr
= -36 [r³/3]₀² = -48
Therefore, the value of the double integral is -48.
Learn more about double integral here
brainly.com/question/31404551
#SPJ4
The given question is incomplete, the complete question is:
Evaluate the double integral. (4x − 9y) dA, D is bounded by the circle with center the origin and radius 2
find a recurrence relation for the number of ways an n-digit binary sequence has at least one instance of two consecutive 0's. define the initial conditions for the system.
The recurrence relation for the number of ways an n-digit binary sequence has at least one instance of two consecutive 0's is given by F(n) = 2F(n-1) - F(n-2) + 2^(n-2), where F(1) = 0 and F(2) = 1.
To derive the recurrence relation, let's consider an n-digit binary sequence that has at least one instance of two consecutive 0's. There are two cases to consider:
The last digit is 1: In this case, the first n-1 digits can be any valid n-1 digit sequence, so there are F(n-1) such sequences.
The last digit is 0: In this case, the second-to-last digit must be 1 to avoid having two consecutive 0's. The first n-2 digits can be any valid n-2 digit sequence, so there are F(n-2) such sequences. However, we need to add back the sequences that were double-counted in the first case, which is simply 2^(n-2) (since there are 2^(n-2) valid (n-1)-digit sequences that end in 0).
Therefore, the total number of n-digit binary sequences with at least one instance of two consecutive 0's is F(n) = F(n-1) + F(n-2) + 2^(n-2). We can simplify this to F(n) = 2F(n-1) - F(n-2) + 2^(n-2). The initial conditions are F(1) = 0 and F(2) = 1 since there are no valid 1-digit sequences and only one valid 2-digit sequence (namely, 10).
To learn more about Recurrence relation, visit:
https://brainly.com/question/29499649
#SPJ11
The recurrence relation for the number of ways an n-digit binary sequence has at least one instance of two consecutive 0's is given by F(n) = 2F(n-1) - F(n-2) + 2^(n-2), where F(1) = 0 and F(2) = 1.
To derive the recurrence relation, let's consider an n-digit binary sequence that has at least one instance of two consecutive 0's. There are two cases to consider:
The last digit is 1: In this case, the first n-1 digits can be any valid n-1 digit sequence, so there are F(n-1) such sequences.
The last digit is 0: In this case, the second-to-last digit must be 1 to avoid having two consecutive 0's. The first n-2 digits can be any valid n-2 digit sequence, so there are F(n-2) such sequences. However, we need to add back the sequences that were double-counted in the first case, which is simply 2^(n-2) (since there are 2^(n-2) valid (n-1)-digit sequences that end in 0).
Therefore, the total number of n-digit binary sequences with at least one instance of two consecutive 0's is F(n) = F(n-1) + F(n-2) + 2^(n-2). We can simplify this to F(n) = 2F(n-1) - F(n-2) + 2^(n-2). The initial conditions are F(1) = 0 and F(2) = 1 since there are no valid 1-digit sequences and only one valid 2-digit sequence (namely, 10).
To learn more about Recurrence relation, visit:
https://brainly.com/question/29499649
#SPJ11
The contribution margin ratio is 25% for Crowne Company and the break-even point in sales is $220,000. If Crowne Company's target operating profit is $62,000, sales would have to be:
Multiple Choice
$282,000.
$276,000.
$468,000.
$248,000.
Sales would have to be $468,000 to achieve the target operating profit of $62,000.
To find the sales level required to achieve the target operating profit, we need to use the formula:
Sales - Variable Costs = Fixed Costs + Operating Profit
The contribution margin ratio is 25%, which means that 75% of each dollar of sales is consumed by variable costs. Therefore, the formula can be expressed as:
0.75 x Sales = Fixed Costs + Operating Profit
Substituting the given values, we get:
0.75 x Sales = 220,000 + 62,000
0.75 x Sales = 282,000
Dividing both sides by 0.75, we get:
Sales = 376,000 / 0.75
Sales = $501,333.33
Therefore, the sales level required to achieve the target operating profit of $62,000 is $501,333.33. However, the options provided in the question do not match this value. To find the closest option, we can round the value to the nearest thousand dollars, which gives us:
Sales = $501,000
We can then check which of the given options is closest to this value. The closest option is $468,000, which is only $33,000 away from the calculated value. Therefore, the answer is:
Sales would have to be $468,000 to achieve the target operating profit of $62,000.
To know more about margin ratio refer here:
https://brainly.com/question/29534784
#SPJ11
NEED ASAP, PLEASE HURRY. THANK YOU!
9. They form a triangle (right)
10. They form a triangle (acute)
11. They form a triangle (obtuse)
12. They form a triangle (obtuse)
13. The horizontal distance travelled by a person riding the ski lift is 5630 feet.
How to verify that the segment length form a triangle?To verify that the segment length form a triangle. The consecutive lengths of the triangle a, b and c must meet all the criteria below:
a + b > c
a + c > b
b + c > a
No. 9
5 + 12 > 13 (True)
5 + 13 > 12 (True)
12 + 13 > 5 (True)
Thus, the segment lengths form a triangle
No. 10
5 + 7 > 8 (True)
5 + 8 > 7 (True)
7 + 8 > 5 (True)
Thus, the segment lengths form a triangle
No. 11
2 + 10 > 11 (True)
2 + 11 > 10 (True)
10 + 11 > 2 (True)
Thus, the segment lengths form a triangle
No. 12
√8 + 4 > 6 (True)
√8 + 6 > 4 (True)
4 + 6 > √8 (True)
Thus, the segment lengths form a triangle
To classify the triangle as Right, Obtuse, or Acute, follow the following steps:
1. Calculate the sum of squares of the two smaller sides.
2. Compare it to the square of the longest side.
3. If the sum is greater, your triangle is acute. If they are equal, your triangle is right. If the sum is less, your triangle is obtuse.
No. 9
5² + 12² = 169
13² = 169
169 = 169 (right)
No. 10
5² + 7² = 74
8² = 64
74 > 64 (acute)
No. 11
2² + 10² = 104
11² = 121
104 < 121 (obtuse)
No. 12
(√8)² + 4² = 24
6² = 36
24 < 36 (obtuse)
No. 13
x = √(5750² - 1170²) (Pythagorean Theorem)
x = 5630 feet
The horizontal distance travelled by a person riding the ski lift is 5630 feet.
Learn more about triangles on:
brainly.com/question/1058720
#SPJ1
a management consultant estimates that the number h of hours per day that employees will work and their daily pay of p dollars are related by the equation 20h5 6,000,000 = p3. find dh dp at p = 200.
The rate at which the number of hours worked per day changes with respect to the daily pay is approximately 0.0058 hours per dollar.
We are given that the relationship between the number of hours worked per day (h) and the daily pay (p) is given by the equation:
20h^5 - 6,000,000 = p^3
To find the partial derivatives of h with respect to p, we can use the implicit differentiation technique, which involves differentiating both sides of the equation with respect to the independent variable (in this case, p) while treating the dependent variable (h) as a function of p.
Differentiating both sides of the equation with respect to p, we get:
100h^4 dh/dp = 3p^2
To find dh/dp, we can divide both sides by 100h^4:
dh/dp = 3p^2 / (100h^4)
We are also given that we need to evaluate this expression at p = 200. To do so, we first need to find the value of h that corresponds to this value of p. We can do this by substituting p = 200 into the original equation and solving for h:
20h^5 - 6,000,000 = 200^3
Simplifying, we get:
20h^5 = 10,800,000
Dividing both sides by 20, we get:
h^5 = 540,000
Taking the fifth root of both sides, we get:
h = 18.4116 (rounded to four decimal places)
Now we can substitute p = 200 and h = 18.4116 into the expression we derived for dh/dp:
dh/dp = 3(200^2) / [100(18.4116)^4]
Evaluating this expression using a calculator, we get:
dh/dp ≈ 0.0058
Therefore, at p = 200, the rate at which the number of hours worked per day changes with respect to the daily pay is approximately 0.0058 hours per dollar.
To learn more about approximately visit:
https://brainly.com/question/30707441
#SPJ11
The rate at which the number of hours worked per day changes with respect to the daily pay is approximately 0.0058 hours per dollar.
We are given that the relationship between the number of hours worked per day (h) and the daily pay (p) is given by the equation:
20h^5 - 6,000,000 = p^3
To find the partial derivatives of h with respect to p, we can use the implicit differentiation technique, which involves differentiating both sides of the equation with respect to the independent variable (in this case, p) while treating the dependent variable (h) as a function of p.
Differentiating both sides of the equation with respect to p, we get:
100h^4 dh/dp = 3p^2
To find dh/dp, we can divide both sides by 100h^4:
dh/dp = 3p^2 / (100h^4)
We are also given that we need to evaluate this expression at p = 200. To do so, we first need to find the value of h that corresponds to this value of p. We can do this by substituting p = 200 into the original equation and solving for h:
20h^5 - 6,000,000 = 200^3
Simplifying, we get:
20h^5 = 10,800,000
Dividing both sides by 20, we get:
h^5 = 540,000
Taking the fifth root of both sides, we get:
h = 18.4116 (rounded to four decimal places)
Now we can substitute p = 200 and h = 18.4116 into the expression we derived for dh/dp:
dh/dp = 3(200^2) / [100(18.4116)^4]
Evaluating this expression using a calculator, we get:
dh/dp ≈ 0.0058
Therefore, at p = 200, the rate at which the number of hours worked per day changes with respect to the daily pay is approximately 0.0058 hours per dollar.
To learn more about approximately visit:
https://brainly.com/question/30707441
#SPJ11
Write the approximate change formula for a function z=f(x,y) at the point (a,b) in terms of differentials Choose the correct answer below. A. dz=fy (a,b) dx + fy(a,b) dy B. Az = f (a,b) dx +fy (a,b) dy – f(a,b) C. Az = fx (a,b)(x-a)+fy (a,b)(y- b)f(a,b) D. dz=f(a,b) dx + fy (a,b) dy + f(a,b)
The approximate change formula for a function z=f(x,y) at the point (a,b) in terms of differentials is [tex]dz=f_y (a,b) dx + f_x(a,b) dy[/tex]. So, option a) is correct.
In calculus, the differential represents the principal part of the change in a function y=f(x) with respect to changes in the independent variable.
Differential, in mathematics, is an expression based on the derivative of a function, useful for approximating certain values of the function.
The derivative of a function can be used to approximate certain function values with a certain degree of accuracy.
The approximate change formula for a function z=f(x,y) at the point (a,b) in terms of differentials is given by the equation [tex]dz=f_y (a,b) dx + f_x(a,b) dy[/tex], where [tex]f_x(a,b)[/tex] and [tex]f_y(a,b)[/tex] represents the partial derivatives of the function f(x,y) with respect to x and y, respectively, evaluated at the point (a,b).
So, option a) is correct.
Learn more about differentials:
https://brainly.com/question/1164377
#SPJ11
A right-angled triangle and two equations are shown below. All lengths are given
in metres.
a) Which equation is correct: equation A or equation B?
b) Use the correct equation from part a) to calculate the length u.
Give your answer in metres to 1 d.p.
Answer:
B.
[tex] \sin64 = ( \frac{u}{5.8} ) [/tex]
Step-by-step explanation:
Because (sin) is equal to opposite divided the hypotenuse so
[tex] \sin64 = ( \frac{u}{5.8} ) [/tex]
And to get (u) we will multiply 5.8 with sin(64)
If you like my answer please give it five starsSketch the solid whose volume is given by the iterated integral.101(7 − x − 5y)dx dy0Describe your sketch.The solid has ---Select--- a triangle a rectangle a trapezoid a straight side and a curved side two straight sides and a curved side two straight sides and two curved sides three straight sides and a curved side in the x y-plane.The solid has ---Select--- a triangle a rectangle a trapezoid a straight side and a curved side two straight sides and a curved side two straight sides and two curved sides three straight sides and a curved side in the x z-plane.The solid has ---Select--- a triangle a rectangle a trapezoid a straight side and a curved side two straight sides and a curved side two straight sides and two curved sides three straight sides and a curved side in the y z-plane.The highest point of the top of the solid is (x, y, z) =.The lowest point of the top of the solid is (x, y, z) =
The sketch of the solid whose volume is given by the iterated integral is given below.
What is iterated integral?To sketch the solid, we can first look at the limits of integration. The limits of x are from 0 to 1, and the limits of y are from 0 to 1-x. This means that the solid is a right triangular pyramid with base vertices at (0,0), (1,0), and (0,1), and height h given by the function h(x,y) = 101(7-x-5y).
The solid has a straight side along the x-axis and two straight sides along the y-axis, and a curved side for the hypotenuse of the base triangle.
The highest point of the top of the solid occurs at the vertex opposite the base triangle, which is at (x,y,z) = (1/3,1/3,200/3).
The lowest point of the top of the solid occurs at the vertex of the base triangle at (x,y,z) = (0,0,707/3).
Thus, the sketch of the solid is prepared.
Learn more about iterated integral, here:
https://brainly.com/question/31383400
#SPJ1
Determine the largest interval (a,b) for which Theorem 1 guarantees the existence of a unique solution on (a,b) to the initial value problem below. xy" -6y' + e^x y = x^4 - 3, y(6) = 1, y'(6)-0, y'',(6) = 2
____ Type your answer in interval notation.)
The largest interval for which Theorem 1 guarantees the existence of a unique solution is (-∞, ∞).
The given initial value problem is:
xy'' - 6y' + eˣ y = x⁴ - 3, y(6) = 1, y'(6) = 0, y''(6) = 2
To determine the largest interval (a,b) for which Theorem 1 guarantees the existence of a unique solution, we need to analyze the coefficients of the differential equation and the forcing term. The coefficients are x, -6, and e^x, and the forcing term is x⁴ - 3.
We can see that the coefficients and the forcing term are continuous and defined for all real numbers.
Therefore, the largest interval for which Theorem 1 guarantees the existence of a unique solution is (-∞, ∞).
To learn more about interval here:
brainly.com/question/17110259#
#SPJ11
find the joint pdf of y1 = x1/x2, y2 = x3/(x1 x2), and y3=x1 x2.
We can write the joint probability density function of Y as: fY(y1, y2, y3) = [tex]fX(y1y3^(1/2), y1^(-1)y3^(1/2), y3/y1) y3^(-3/2)[/tex]
Let X = (X1, X2, X3) be a vector of independent continuous random variables with joint probability density function fX(x1, x2, x3). We want to find the joint probability density function of Y = (Y1, Y2, Y3) = (X1/X2, X3/(X1X2), X1X2).
To do this, we need to find the Jacobian matrix of the transformation from X to Y. The Jacobian matrix is:
J = |∂y1/∂x1 ∂y1/∂x2 ∂y1/∂x3|
|∂y2/∂x1 ∂y2/∂x2 ∂y2/∂x3|
|∂y3/∂x1 ∂y3/∂x2 ∂y3/∂x3|
where
∂y1/∂x1 = 1/x2, ∂y1/∂x2 = -x1/x2^2, ∂y1/∂x3 = 0
∂y2/∂x1 = -x3/(x1^2x2), ∂y2/∂x2 = -x3/(x1x2^2), ∂y2/∂x3 = 1/(x1x2)
∂y3/∂x1 = x2, ∂y3/∂x2 = x1, ∂y3/∂x3 = 0
So the Jacobian matrix is:
[tex]J = |1/x2 -x1/x2^2 0|[/tex]
[tex]|-x3/(x1^2x2) -x3/(x1x2^2) 1/(x1x2)|[/tex]
|x2 x1 0|
The determinant of J is:
[tex]|J| = x3/(x1^2x2^2)[/tex]
Therefore, the joint probability density function of Y is:
fY(y1, y2, y3) = fX(x1, x2, x3)|J|
where [tex]x1 = y1y3^(1/2)[/tex], [tex]x2 = y1^(-1)y3^(1/2),[/tex] and x3 = y3/y1
Substituting these expressions into the Jacobian and simplifying, we get:
[tex]|J| = y3^{(-3/2)[/tex]
So the joint probability density function of Y is:
[tex]fY(y1, y2, y3) = fX(y1y3^(1/2), y1^(-1)y3^(1/2), y3/y1) y3^(-3/2)[/tex]
Therefore, we can write the joint probability density function of Y as:
[tex]fY(y1, y2, y3) = fX(y1y3^(1/2), y1^(-1)y3^(1/2), y3/y1) y3^(-3/2)[/tex]
To learn more about probability density function visit: https://brainly.com/question/30403935
#SPJ11
Suppose that when the pH of a certain chemical compound is 5.00, the pH measured by a randomly selected beginning chemistry student is a random variable with mean 5.00 and standard deviation .2. A large batch of the compound is subdivided and a sample given to each student in a morning lab and each student in an afternoon lab
If pH is a normal variable and there are 25 students in each lab, then the value of P(-0.1 ≤ X' - y' ≤ 0.1) is 0.9232.
Let X represent the pH reading that the morning students determined.
Let Y represent the pH reading that the afternoon students came up with.
μₓ = 5
σₓ = 0.2
Calculation is the goal P(-0.1 ≤ X' - y' ≤ 0.1).
From the information provided number of students n = 25
Consider,
μₓ = E(X')
μₓ = E(ΣXi/n)
μₓ = 1/25 E(X₁ + X₂ + ....... + X₂₅)
μₓ = 1/25 [E(X₁) + E(X₂) + ....... + E(X₂₅)]
μₓ = 1/25 (5 + 5 + ...... + 5)
μₓ = 1/25 × 125
μₓ = 5
Therefore
[tex]\mu_{X'-Y'} = \mu_{X'}-\mu_{Y'}[/tex]
[tex]\mu_{X'-Y'}[/tex] = 5 - 5
[tex]\mu_{X'-Y'}[/tex] = 0
Now consider
σₓ'² = var(X')
σₓ'² = var(ΣXi/n)
σₓ'² = 1/n² [var(X₁) + var(X₂) + ........ + var(X₂₅)]
As all X are independent. So Cov(Xi, Xj) = 0
σₓ'² = 1/(25)²[(0.2)² + (0.2)² + ......... + (0.2)²]
σₓ'² = (25 × (0.2)²)/625
σₓ'² = (25 × 0.04)/625
σₓ'² = 1/625
σₓ'² = 0.0016
Therefore,
[tex]\sigma_{X'-Y'}=\sqrt{var(X')+var(Y')}[/tex]
[tex]\sigma_{X'-Y'}=\sqrt{0.0016+0.0016}[/tex]
[tex]\sigma_{X'-Y'}=\sqrt{0.0032}[/tex]
[tex]\sigma_{X'-Y'}[/tex] = 0.0566
Now we compute P(-0.1 ≤ X' - y' ≤ 0.1).
P(-0.1 ≤ X' - y' ≤ 0.1) = P[(-0.1 - 0)/0.0566 ≤ Z ≤ (0.1 - 0)/0.0566]
P(-0.1 ≤ X' - y' ≤ 0.1) = P[-1.7668 ≤ Z ≤ 1.7668]
P(-0.1 ≤ X' - y' ≤ 0.1) = P(Z ≤ 1.7668) - P(Z ≤ -1.7668)
Using excel.
P(-0.1 ≤ X' - y' ≤ 0.1) = (= NORMSDIST(1.77)) - (= NORMSDIST(-1.77))
P(-0.1 ≤ X' - y' ≤ 0.1) = 0.9616 - 0.0384
P(-0.1 ≤ X' - y' ≤ 0.1) = 0.9232
To learn more about normal variable link is here
brainly.com/question/14782203
#SPJ4
The complete question is:
Suppose that when the pH of a certain chemical compound is 5.00, the pH measured by a randomly selected beginning chemistry student is a random variable with mean 5.00 and standard deviation 0.2. A large batch of the compound is subdivided and a sample given to each student in a morning lab and each student in an afternoon lab. Let X' = the average pH as determined by the afternoon students.
If pH is a normal variable and there are 25 students in each lab, compute P(-0.1 ≤ X' - y' ≤ 0.1).
If pH is a normal variable and there are 25 students in each lab, then the value of P(-0.1 ≤ X' - y' ≤ 0.1) is 0.9232.
Let X represent the pH reading that the morning students determined.
Let Y represent the pH reading that the afternoon students came up with.
μₓ = 5
σₓ = 0.2
Calculation is the goal P(-0.1 ≤ X' - y' ≤ 0.1).
From the information provided number of students n = 25
Consider,
μₓ = E(X')
μₓ = E(ΣXi/n)
μₓ = 1/25 E(X₁ + X₂ + ....... + X₂₅)
μₓ = 1/25 [E(X₁) + E(X₂) + ....... + E(X₂₅)]
μₓ = 1/25 (5 + 5 + ...... + 5)
μₓ = 1/25 × 125
μₓ = 5
Therefore
[tex]\mu_{X'-Y'} = \mu_{X'}-\mu_{Y'}[/tex]
[tex]\mu_{X'-Y'}[/tex] = 5 - 5
[tex]\mu_{X'-Y'}[/tex] = 0
Now consider
σₓ'² = var(X')
σₓ'² = var(ΣXi/n)
σₓ'² = 1/n² [var(X₁) + var(X₂) + ........ + var(X₂₅)]
As all X are independent. So Cov(Xi, Xj) = 0
σₓ'² = 1/(25)²[(0.2)² + (0.2)² + ......... + (0.2)²]
σₓ'² = (25 × (0.2)²)/625
σₓ'² = (25 × 0.04)/625
σₓ'² = 1/625
σₓ'² = 0.0016
Therefore,
[tex]\sigma_{X'-Y'}=\sqrt{var(X')+var(Y')}[/tex]
[tex]\sigma_{X'-Y'}=\sqrt{0.0016+0.0016}[/tex]
[tex]\sigma_{X'-Y'}=\sqrt{0.0032}[/tex]
[tex]\sigma_{X'-Y'}[/tex] = 0.0566
Now we compute P(-0.1 ≤ X' - y' ≤ 0.1).
P(-0.1 ≤ X' - y' ≤ 0.1) = P[(-0.1 - 0)/0.0566 ≤ Z ≤ (0.1 - 0)/0.0566]
P(-0.1 ≤ X' - y' ≤ 0.1) = P[-1.7668 ≤ Z ≤ 1.7668]
P(-0.1 ≤ X' - y' ≤ 0.1) = P(Z ≤ 1.7668) - P(Z ≤ -1.7668)
Using excel.
P(-0.1 ≤ X' - y' ≤ 0.1) = (= NORMSDIST(1.77)) - (= NORMSDIST(-1.77))
P(-0.1 ≤ X' - y' ≤ 0.1) = 0.9616 - 0.0384
P(-0.1 ≤ X' - y' ≤ 0.1) = 0.9232
To learn more about normal variable link is here
brainly.com/question/14782203
#SPJ4
The complete question is:
Suppose that when the pH of a certain chemical compound is 5.00, the pH measured by a randomly selected beginning chemistry student is a random variable with mean 5.00 and standard deviation 0.2. A large batch of the compound is subdivided and a sample given to each student in a morning lab and each student in an afternoon lab. Let X' = the average pH as determined by the afternoon students.
If pH is a normal variable and there are 25 students in each lab, compute P(-0.1 ≤ X' - y' ≤ 0.1).
find the minimum distance from the point to the plane x − y z = 4. (hint: to simplify the computations, minimize the square of the distance.) (1, −4, 2)
The minimum distance from the point (1,-4,2) to the plane x-y-z=4 is 2sqrt(3).
To find the minimum distance from the point (1,-4,2) to the plane x-y-z=4, we can use the formula for the distance between a point and a plane.The formula for the distance between a point (x1,y1,z1) and a plane Ax + By + Cz + D = 0 is:distance = |Ax1 + By1 + Cz1 + D| / sqrt(A^2 + B^2 + C^2)In our case, the plane is x-y-z=4, so A=1, B=-1, C=-1, and D=4. The point we are interested in is (1,-4,2).The equation of the plane can be written as x-y+z = -4. We want to find the point on the plane that is closest to (1,-4,2). Let (x0,y0,z0) be that point.We can use the fact that the line from (1,-4,2) to (x0,y0,z0) is perpendicular to the plane, and hence the vector from (1,-4,2) to (x0,y0,z0) is orthogonal to the normal vector of the plane, which is (1,-1,-1).Letting d^2 be the square of the distance, we want to minimize d^2 = (x0 - 1)^2 + (y0 + 4)^2 + (z0 - 2)^2 subject to the constraint that x0 - y0 + z0 = -4.Using the method of Lagrange multipliers, we can set up the following equations:2(x0 - 1) = λ2(y0 + 4) = -λ2(z0 - 2) = λx0 - y0 + z0 = -4Solving these equations simultaneously, we get x0 = 2, y0 = -6, z0 = -2, and λ = 8.Therefore, the minimum distance from the point (1,-4,2) to the plane x-y-z=4 is:distance = |(1)(2) + (-1)(-6) + (-1)(-2) + 4| / sqrt(1^2 + (-1)^2 + (-1)^2) = 2sqrt(3)So, the minimum distance from the point (1,-4,2) to the plane x-y-z=4 is 2sqrt(3).For more such question on distance
https://brainly.com/question/28551043
#SPJ11
1. find a recurrence relation for the number of ways an n-digit binary sequence has at least one instance of two consecutive 0’s. define the initial conditions for the system.
The initial conditions are A(1) = 2 and A(2) = 3.
Let A(n) be the number of n-digit binary sequences that have at least one instance of two consecutive 0's. We can obtain a recurrence relation for A(n) as follows:
To count the number of n-digit binary sequences with at least one instance of two consecutive 0's, we can count the number of sequences that do not have any consecutive 0's and subtract this from the total number of n-digit binary sequences.
For a sequence of length n to not have any consecutive 0's, the last digit can either be 1 or 0 but the second to last digit cannot be 0 (otherwise there would be two consecutive 0's). So, there are two cases:
The last digit is 1, and the remaining n-1 digits do not contain any consecutive 0's.
The last digit is 0, the second to last digit is 1, and the remaining n-2 digits do not contain any consecutive 0's.
Therefore, we have the recurrence relation:
A(n) = 2A(n-1) - A(n-2)
where A(1) = 2 (since there are two possible 1-digit binary sequences), and A(2) = 3 (since there are three possible 2-digit binary sequences: 00, 01, and 10).
The first term 2A(n-1) counts the sequences that end in 1, and the second term A(n-2) counts the sequences that end in 01. We subtract A(n-2) to avoid overcounting sequences that end in 001 (which would be counted twice).
Therefore, the initial conditions are A(1) = 2 and A(2) = 3.
To learn more about overcounting visit:
https://brainly.com/question/30884507
#SPJ11
The initial conditions are A(1) = 2 and A(2) = 3.
Let A(n) be the number of n-digit binary sequences that have at least one instance of two consecutive 0's. We can obtain a recurrence relation for A(n) as follows:
To count the number of n-digit binary sequences with at least one instance of two consecutive 0's, we can count the number of sequences that do not have any consecutive 0's and subtract this from the total number of n-digit binary sequences.
For a sequence of length n to not have any consecutive 0's, the last digit can either be 1 or 0 but the second to last digit cannot be 0 (otherwise there would be two consecutive 0's). So, there are two cases:
The last digit is 1, and the remaining n-1 digits do not contain any consecutive 0's.
The last digit is 0, the second to last digit is 1, and the remaining n-2 digits do not contain any consecutive 0's.
Therefore, we have the recurrence relation:
A(n) = 2A(n-1) - A(n-2)
where A(1) = 2 (since there are two possible 1-digit binary sequences), and A(2) = 3 (since there are three possible 2-digit binary sequences: 00, 01, and 10).
The first term 2A(n-1) counts the sequences that end in 1, and the second term A(n-2) counts the sequences that end in 01. We subtract A(n-2) to avoid overcounting sequences that end in 001 (which would be counted twice).
Therefore, the initial conditions are A(1) = 2 and A(2) = 3.
To learn more about overcounting visit:
https://brainly.com/question/30884507
#SPJ11
Distribute 8 ( X +30) +5
Answer:
=8x+240+5
=8x+245
Step-by-step explanation:
[tex]\sf 8x+245.[/tex]
Step-by-step explanation:1. Write the initial expression.[tex]\sf 8(x+30)+5[/tex]
2. Rewrite by distributing "8" (check the attached image).[tex]\sf [(8)(x)+(8)(30)]+5\\ \\\sf [8x+240]+5\\ \\8x+240+5\\ \\8x+245[/tex]
Best answer to 6 3/4 - 5 1/8
Answer: 1 5/8
Step-by-step explanation:
6 3/4 is 27/4 as a mixed number.
5 1/8 is 41/8 as a mixed number.
27/4 = 54/8
54/8 - 41/8 = 13/8 = 1 5/8
Caleb observed the costumes that people wore to a costume party. The themes of the costumes and the number of people who wore them are shown in the following table.
Costume Theme Superhero Decades Scary TV & Movie Characters Animals Career
Number of People 128 96 72 52 24 28
A circle graph was drawn from the data in the table. What percentage would be on the Animals slice of the circle graph?
24%
21.6%
6.7%
6%
The percentage of people wearing animal-themed costumes would be 6% of the total.
In the given table, the number of people wearing animal costumes is stated as 24. To find the percentage, we need to divide this number by the total number of people and then multiply by 100.
The total number of people is the sum of all the costume themes, which is 128 + 96 + 72 + 52 + 24 + 28 = 400.
So, the calculation would be: (24 / 400) * 100 = 6%. Therefore, the percentage of people wearing animal-themed costumes would be 6% of the total.
In summary, the Animals slice of the circle graph would represent 6% of the total number of people at the costume party. This means that out of the 400 people, 24 chose to dress up as animals.
This calculation is derived by dividing the number of people wearing animal costumes (24) by the total number of people (400) and multiplying the result by 100 to get the percentage.
The value of 6% indicates the proportion of people who opted for animal-themed costumes out of the entire party attendance.
for such more questions on percentage
https://brainly.com/question/843074
#SPJ8
Assume that randomly selected subject is given bone density test. Bone density test scores are normally distributed with mean of and standard deviation of Draw graph and find P17, the 17th percentile. This the bone density score separating the bottom 17% from the top 83%Which graph represents P17 Choose the correct graph below: The bone density score corresponding to P17 Is ____(Round two decima places as needed )
The bone density score corresponding to P17 is approximately -0.04, separating the bottom 17% from the top 83% of the distribution.
What is standard normal distribution?A particular kind of normal distribution with a mean of 0 and a standard deviation of 1 is the standard normal distribution, sometimes referred to as the standard Gaussian distribution. It is a particular instance of the normal distribution that has been converted to have a mean of 0 and a standard deviation of 1 for simple study and comparison.
For doing statistical computations and evaluating hypotheses, the standard normal distribution, frequently represented by the letter "Z," is utilised. A standard normal random variable is one that has a standard normal distribution.
Given that the mean (μ) of the bone density test scores is 0 and the standard deviation (σ) is 1, we can determine the position of P17 on the graph.
In a standard normal distribution with a mean of 0 and a standard deviation of 1, the 17th percentile (P17) corresponds to a z-score of approximately -0.04. A z-score represents the number of standard deviations a data point is from the mean.
To find the bone density score corresponding to P17, we can multiply the z-score (-0.04) by the standard deviation (1) and add it to the mean (0):
Bone density score corresponding to P17 = (Z-score * Standard deviation) + Mean
= (-0.04 * 1) + 0
= -0.04
Learn more about Normal Distribution here:
https://brainly.com/question/29509087
#SPJ1
Complete Question: Assume that randomly selected subject is given bone density test. Bone density test scores are normally distributed with mean of 0 and standard deviation of 1. Draw graph and find P17, the 17th percentile. This the bone density score separating the bottom 17% from the top 83%Which graph represents P17 Choose the correct graph below: The bone density score corresponding to P17 Is ____(Round two decima places as needed )
What is the idea behind the one-way analysis of variance? What two measures of variation are being compared?
Describe the purpose of the Bonferroni correction for multiple comparisons.
44. A study is performed to compare the mean numbers of primary-care visits over 3 years among four different health maintenance organizations (HMOs). Fifty patients are randomly sampled from each HMO.
Write the hypothesis to be tested.
Complete the following ANOVA table:
Source of Variation
Sum of Squares
Degrees of Freedom
Mean Squares
F
Between
574.3
Within
Total
2759.8
Six different doses of a particular drug are compared in an effectiveness study. The study involves 30 subjects, and equal numbers of subjects are randomly assigned to each dose group.
What are the null and alternative hypotheses to in the comparison?
Complete the following ANOVA table:
Source of Variation
Sum of Squares
Degrees of Freedom
Mean Squares
F
Between
189.85
Within
Total
352.57
Is there a significant difference in the effectiveness among the doses? Use α = 0.05.
Suppose we wish to compare dose groups 1 and 2 and the following are available:
27.6. Use the LSD test to assess whether there is a difference in effectiveness between dose groups 1 and 2 at the 5% level of significance.
The following data were collected as part of a study comparing a control treatment to an active treatment. Three doses of the active treatment were considered in the study. The following table displays summary statistics on the ages of patients enrolled in the study classified by treatment group:
Treatment
No. Participants
Mean Age
SD
Control
8
29.5
3.74
Low dose
8
34.5
2.88
Moderate dose
8
15.9
3.72
High dose
8
44.0
6.65
Test if there is a significant difference in the mean ages of participants across treatment groups. Complete the following table and show all parts of the test. Use α = 0.05.
Source of Variation
Sum of Squares
Degrees of Freedom
Mean Squares
F
Between
Within
Total
3860.97
Is there a significant difference in the mean ages of participants the control and low dose groups? Run the appropriate test at α = 0.05.
An obstetrician wanted to determine the impact that three experimental diets had on the birth weights of pregnant mothers.She randomly selected 27 pregnant mothers in the first trimester of whom 9 were 20 to 29 years old, 9 were 30 to 39 years old, and 9 were 40 or older.After delivery she measured the birth weights (in grams) of the babies and obtained the following data:
Diet
1
2
3
4473
3961
3667
3878
3557
3139
3936
3321
3356
3886
3330
2762
4147
3644
3551
3693
2811
3272
3878
2937
2781
4002
3228
3138
3382
2732
3435
Birth weights are known to be normally distributed.Verify the requirement of equal population variances.
Determine whether there is significant differences in the means for the three diets.
If there is a significant difference for the three diets, use HSD test to determine which pairwise means differ using an error rate of =0.05.
ANOVA, is a statistical method used to compare the means of three or more groups in order to determine if there are any statistically significant differences among them. ANOVA evaluates the variability between the means of different groups, also known as "treatments", by comparing it to the variability within each group. This is done by comparing the variation between the group means, referred to as "between-group variation" or "between-group sum of squares", with the variation within each group, known as "within-group variation" or "within-group sum of squares".
What is the idea behind ANOVA and what two measures of variation are being compared?1.The idea behind the one-way analysis of variance (ANOVA) is to compare the means of three or more groups to determine if there are any statistically significant differences among them. ANOVA assesses the variability between the means of different groups (often referred to as "treatments") and compares it to the variability within the groups. The two measures of variation being compared are the variation between the group means (referred to as "between-group variation" or "between-group sum of squares") and the variation within each group (referred to as "within-group variation" or "within-group sum of squares").
2.The Bonferroni correction in ANOVA is used to control the overall false positive rate (type I error rate) when conducting multiple pairwise comparisons. With multiple comparisons, the risk of obtaining at least one significant result by chance increases, leading to an inflated overall type I error rate. The Bonferroni correction adjusts the significance level (alpha) for each individual comparison to maintain a desired overall type I error rate.
3.Hypothesis to be tested for the health maintenance organizations (HMOs) study:
Null hypothesis (H0): There is no significant difference in the mean numbers of primary-care visits over 3 years among the four HMOs. Alternative hypothesis (Ha): There is a significant difference in the mean numbers of primary-care visits over 3 years among the four HMOs.
4.ANOVA table for the health maintenance organizations (HMOs) study:
Source of Variation | Sum of Squares | Degrees of Freedom | Mean Squares | F
Between | 574.3 | k - 1 (where k is the number of groups) | Between-group MS / Within-group MS | F-statistic value
Within | | nT - k (where n is the total sample size and T is the number of groups) | Within-group MS |
Total | 2759.8 | nT - 1 | |
5.Hypotheses to be tested for the six doses of a drug effectiveness study:
Null hypothesis (H0): There is no significant difference in the effectiveness among the six doses of the drug.
Alternative hypothesis (Ha): There is a significant difference in the effectiveness among the six doses of the drug.
6.ANOVA table for the six doses of a drug effectiveness study:
Source of Variation | Sum of Squares | Degrees of Freedom | Mean Squares | F
Between | 189.85 | 5 (number of doses - 1) | Between-group MS / Within-group MS | F-statistic value
Within | | 24 (total sample size - number of doses) | Within-group MS |
Total | 352.57 | 29 | |
7.The LSD (Least Significant Difference) test can be used to determine if there is a significant difference in effectiveness between dose groups 1 and 2 at a 5% level of significance. The LSD test compares the means of the two groups to the standard error of the difference, calculated using the formula LSD = t * sqrt(MS_within / n), where t is the critical value from the t-distribution, MS_within is the mean square within-groups from the ANOVA table, and n is the sample size for each group.
8.To test for a significant difference in the mean ages of participants between the control and low dose groups in the active treatment
Learn more about ANOVA
brainly.com/question/23638404
#SPJ11
Ms. Dundy randomly chooses one male student and one female student to read from a book. Which of the following correctly describes the relationship between the two outcomes?
Answer:
Step-by-step explanation:
The outcomes of selecting one male student and one female student to read from a book are independent. This means that the outcome of selecting a male student does not affect the probability of selecting a female student, and vice versa. In other words, the events are unrelated and the occurrence of one event has no effect on the occurrence of the other event. Therefore, the two outcomes are not related to each other, and they are independent events.
find the value of p for which gini’s index is maximized. at which point(s) does g(p) assume its minimum?
Gini's index is maximized at p = 0.5 and G(p) assumes its minimum value at the points p = 0 and p = 1.
To find the value of p for which Gini's index is maximized, we need to understand the concept of Gini's index (G(p)). Gini's index measures the inequality among values of a distribution, where 0 represents perfect equality and 1 represents perfect inequality.
For a binary classification problem with only two possible outcomes, G(p) can be calculated using the formula:
G(p) = 1 - (p² + (1-p)²)
To maximize Gini's index, we need to find the value of p for which G(p) reaches its highest value. To do this, we can differentiate G(p) with respect to p and set the result to 0:
dG(p)/dp = -2p + 2(1-p)
Setting the derivative to 0, we get:
0 = -2p + 2(1-p)
Solving for p, we get:
p = 0.5
So, Gini's index is maximized at p = 0.5.
To find the points where G(p) assumes its minimum, we can examine the endpoints of the probability range [0, 1]. When p = 0 or p = 1, G(p) = 1 - (0² + 1²) = 0, which represents perfect equality.
Therefore, G(p) assumes its minimum value at the points p = 0 and p = 1.
To learn more about Gini's index here:
brainly.com/question/31075745#
#SPJ11
suppose that y is normally distributed with parameters μ and σ. you observe y and then build a rectangle with length |y | and width 3|y |. let a be the area of the resulting rectangle. find e(a).
If y is normally distributed with parameters μ and σ and you observe y and then build a rectangle with length |y | and width 3|y |, then e(a) = 3(σ[tex]^2[/tex] + μ[tex]^2[/tex])
To find E(A), the expected value of the area A of the rectangle, we need to consider the distribution of Y and the dimensions of the rectangle.
Given that Y is normally distributed with parameters μ (mean) and σ (standard deviation), we know that the length of the rectangle is |Y| and the width is 3|Y|. Therefore, the area A of the rectangle can be expressed as:
A = |Y| * 3|Y|
Now, let's find the expected value of A, E(A):
E(A) = E(|Y| * 3|Y|)
Since 3 is a constant, we can take it out of the expectation:
E(A) = 3 * [tex]E(|Y|^2)[/tex]
We need to find the expected value of [tex]|Y|^2[/tex]. Notice that [tex]|Y|^2[/tex] = [tex]Y^2[/tex], as squaring a number removes its sign. So, we need to find [tex]E(Y^2)[/tex].
For a normal distribution with parameters μ and σ, we know that:
[tex]E(Y^2)[/tex] = Var(Y) + [tex](E(Y))^2[/tex]
Here, Var(Y) represents the variance of Y, which is σ[tex]^2[/tex], and E(Y) represents the expected value of Y, which is μ. Therefore:
[tex]E(Y^2)[/tex] = σ[tex]^2[/tex]+ μ[tex]^2[/tex]
Now, we can substitute this value back into our expression for E(A):
E(A) = 3 * [tex]E(Y^2)[/tex] = 3 * (σ[tex]^2[/tex] + μ[tex]^2[/tex])
So, the expected value of the area A of the resulting rectangle is:
E(A) = 3(σ[tex]^2[/tex] + μ[tex]^2[/tex])
To learn more about standard deviation, refer:-
https://brainly.com/question/23907081
#SPJ11
Define a relation R on Z as follows: For all m, n element Z m R n iff 3 | (m^2 - n^2)
(a) Prove that R is an equivalence relation.
(b) List every element of [4] (the equivalence class of 4) that is positive and less than 10.
(c) How many equivalence classes are there?
The relation R is reflexive, symmetric, and transitive, therefore, it is an equivalence relation. List of elements of [4] that is positive and less than 10 are {2,8} and there are infinitely many equivalence classes.
(a) To show that R is an equivalence relation, we need to show that it satisfies three properties: reflexivity, symmetry, and transitivity.
Reflexivity: For any integer n, we have 3|[tex](n^2 - n^2)[/tex] = 0, so n R n. Therefore, R is reflexive.
Symmetry: If m R n, then [tex]3|(m^2 - n^2)[/tex], so [tex]3|(-(m^2 - n^2))[/tex] = [tex](n^2 - m^2).[/tex]Thus, n R m. Therefore, R is symmetric.
Transitivity: If m R n and n R p, then [tex]3|(m^2 - n^2)[/tex] and [tex]3|(n^2 - p^2)[/tex], so [tex]3|((m^2 - n^2) + (n^2 - p^2)) = m^2 - p^2[/tex]. Thus, m R p. Therefore, R is transitive.
Since R is reflexive, symmetric, and transitive, it is an equivalence relation.
(b) The equivalence class [4] contains all integers n such that [tex]3|(4^2 - n^2) = 16 - n^2[/tex]. The positive integers less than 10 that satisfy this condition are 2 and 8. Therefore, [4] = {n element Z | [tex]3|(4^2 - n^2)[/tex], 0 < n < 10} = {2, 8}.
(c) There are infinitely many equivalence classes since for any integer n, [n] = {m element Z | [tex]3|(m^2 - n^2)[/tex]}.
To know more about equivalence relation refer here:
https://brainly.com/question/14307463
#SPJ11
3) describe 4 desired scheduled algorithm characteristics (20 pts.)
Here are four desired scheduled algorithm characteristics:
1. Fairness - A good scheduled algorithm should ensure that every task or process gets its fair share of resources. This means that no one task or process should be starved of resources while another hogging them.
2. Efficiency - A scheduled algorithm should be efficient in terms of resource utilization. It should ensure that resources are used effectively and not wasted. This can be achieved by prioritizing processes based on their importance and urgency.
3. Predictability - A scheduled algorithm should be predictable in terms of execution time. This means that a process that takes a certain amount of time to execute should always take that same amount of time, regardless of when it is executed. This is important for real-time systems where timing is critical.
4. Scalability - A good scheduled algorithm should be scalable, meaning it can handle a large number of tasks or processes without sacrificing performance. This is important in systems that need to handle a large number of requests or transactions, such as web servers or databases.
Know more about scheduled algorithm here:
https://brainly.com/question/30033696
#SPJ11
Find the equation of the line that passes through (3,1) and is parallel to y = 1 - 2x.
Leave your answer in the form y = mx + c
Answer:
y = -2x + 7
Step-by-step explanation:
y = 1 - 2x can be written
y = -2x + 1
Parallel lines have the same slope. The slope for the parallel line is -2. This is the number before the x.
To write an equation in the slope intercept form, we need the slope and the y-intercept. We have the slope. To find the y-intercept will will use the slope, and the values y (3,1) and the value of x (3,1) from the point given
substitute 1 for y, -2 for m, and 3 for x.
y = mx + b
1 = (-2)(3) + b
1 = -6 + b Add 6 to both sides
1 + 6 = -6 + 6 + b
7 = b
The y-intercept is 7.
Substitute -2 for m and 7 for b to write the equation
y = mx + b
y = -2x + 7
Helping in the name of Jesus.
Answer Immeditely Please
Answer:
We have a 30°-60°-90° right triangle, so the length of the longer leg is √3 times the length of the shorter leg.
x = 4√3
15. There are 500 Band-aids in a box. The school nurse's office uses approximately 47
Band-aids per day on injured students. How many Band-aids will be left in the box
after 9 days?
16. A pediatrician's office buys a roll of 500 stickers. If each patient
receives a sticker at check-out and 83 patients are examined each day, how many
stickers will be left after 6 days?
17. An athletic trainer orders 8 cases of athletic tape for football season. There are 32
rolls of tape per case. How many rolls of tape would the athletic trainer have left if
20 rolls of tape are used on average each week for the first 3 months of football
season?
18. A dentist examines 8 patients each hour for the first four hours the dental clinic is
open each morning. How many patients will the dentist need to examine in the
afternoon if the goal of the clinic is to examine 50 patients each day?
19. Matthew recently accepted a job at a hospital that is 35 minutes away from his
home. What time should he leave home if his shift starts at 7 a.m. and it takes 10
minutes to walk inside from the parking deck and he also needs to allot an extra 15
minutes for unexpected traffic delays?
20. You have $300 to spend from your insurance flex card. Your doctor's office co-pay
was $25, your 3-month prescription cost was $52, and the cost of your eyeglasses
after insurance was $186. How much money do you have left to spend from your
flex card?