discuss why China's southern, western, northern, and eastern borders can be seen as potential weaknesses for China in its relations with its neighbors and other foreign countries.

The presence of trilobites in a slab can provide information about the age and paleoenvironmental setting of the rock, which could be anywhere between the Early Cambrian and the end of the Permian period.

How to determine the presence of trilobites in a slab tell us about its age and paleoenvironmental setting?

If trilobites were found in a slab, the age of the slab would depend on the specific species of trilobite present.

Trilobites lived from the Early Cambrian period, which began around 541 million years ago, until the end of the Permian period, which ended around 252 million years ago. So, the age of the slab could be anywhere within that time range.

Other fossils that might be found from this era include brachiopods, crinoids, and ammonites. These were all common marine organisms that lived during the same time as the trilobites.

The paleoenvironmental setting of the slab would likely be a marine environment, as trilobites were primarily marine organisms.

However, the specific conditions would depend on the age and location of the slab. For example, during the early Cambrian period, the paleoenvironmental setting would have been vastly different than during the Permian period.

Learn more about trilobites

brainly.com/question/27329190

#SPJ11

Answer:

Explanation:For the atmosphere, the drop in temperature of rising, unsaturated air is about 10 degrees C/1000 meters (5.5 deg F per 1000 feet) altitude. If a parcel of air is at 24 degrees C at sea level, and it rises to 1000 meters, its temperature will go down to 14 degrees C. If it goes up to 2000 meters, its temperature will go down to 4 degrees C.

4. What will its temperature be at 3000 meters?

The temperature would be minus 6 degrees C.

This rate of temperature change of unsaturated air with changing altitude is called the dry adiabatic lapse rate: the rate of change of the temperature of rising or subsiding air when no condensation is taking place (we’ll talk about the condensation part shortly).

If the air subsides, it also changes temperature. It warms up, and it is warming up at the dry adiabatic lapse rate. So, if the air at 4000 meters altitude has a temperature of -10 degrees C, and it subsides to 3000 meters, its temperature will warm up to 0 degrees C. If it continues to subside, then at 2000 meters, its temperature will be 10 degrees C.

5. What will the temperature of this air be at 1000 meters?

Its temperature would be 20 degrees C.

Make sure you notice that we are talking about moving air (rising or subsiding), not still air. The change in temperature of still air (that is, air that is not rising or subsiding) follows the environmental lapse rate, which varies considerably, but averages about 6.5 deg C/1000 meters (3.6 deg/1000 feet). In still air, if you went up in a hot air balloon, carrying a thermometer and taking the air temperature every 1000 meters, on average the temperature would drop 6.5 degrees C every 1000 meters. The rate of temperature change as you rise in still air is not as great as the rate of change of rising air; that is, the air parcel does not cool off as fast.

For instance, the air temperature at sea level is 28 degrees C. Climb into your balloon, release the tethers, and go up 1000 meters in the still air.

6. On average, what will the air temperature be at 1000 meters?

The temperature will be 21.5 degrees C.

Well, what happens is that the air will still cool off, but not as fast. If water vapor in the air is condensing, the adiabatic rate is lower. The air is only cooling off at a rate of about 5 degrees C/1000 meters (2.7 deg per 1000 feet). This is called the saturated adiabatic lapse rate (or the wet adiabatic lapse rate, or the moist adiabatic lapse rate, depending on the textbook you are using). The saturated lapse rate varies with the original temperature of the air parcel, but 5 degrees C/1000 meters is a commonly used value.

So, let’s assume a rising parcel of air reaches the lifting condensation level at 2000 meters, at a dew point temperature of 12 degrees C. At this point, clouds will form. As the air continues to rise, it will continue to decrease in temperature, but more slowly than it cooled off before condensation began.

11. What will the temperature of this parcel of air be at 3000 meters?

The temperature at 3000 meters will be approximately 7 degrees C. The saturated adiabatic lapse rate is given as 5 deg C/1000 meters, so if you go up 1000 meters, the air will cool off 5 degrees. 12-5=7.

a) The size of sediment grains carried by ocean water is directly related to the energy of the water. When the water is moving at a high velocity, it can carry larger sediment grains because it has more energy to overcome the frictional forces that keep the grains in place. Conversely, slower-moving water can only carry smaller sediment grains because it doesn't have enough energy to move larger ones.

b) Mapping the grain sizes of sediment that has settled onto the seafloor can provide valuable information about the history and dynamics of ocean currents. For example, if the sediment is composed mostly of fine-grained particles, it suggests that the water was moving slowly when it was deposited. On the other hand, if the sediment contains a mixture of fine and coarse-grained particles, it suggests that the water was moving at varying velocities.

By studying the distribution of sediment grain sizes, oceanographers can learn about the intensity and direction of ocean currents in the past and present, and use this information to make predictions about future oceanographic events.

To know more about sediment grains refer here:

https://brainly.com/question/29220733#

#SPJ11

True. Advection is the transfer of heat or other properties through the movement of a fluid, such as air or water. In the case of heat transfer from the equator to higher latitudes and polar regions, this is often accomplished through the advection of warm air and ocean currents towards these regions.

Advection is the transfer of heat, mass, or other properties through the motion of a fluid, such as air or water. It is different from conduction and radiation, which involve heat transfer through stationary materials or empty space, respectively.

Advection can occur in the atmosphere, oceans, or other fluids, and is often driven by differences in temperature or pressure between different regions. For example, warm air can advect towards colder regions, leading to an increase in temperature in those areas. Similarly, ocean currents can advect warm or cold water from one region to another, affecting the climate and weather patterns of those regions.

To know more about Advection here

https://brainly.com/question/18803983

#SPJ4

The right answer is option D. Assimilating everyone to a single cultural framework is NOT a reason for including cultural and linguistic competence in disaster preparedness and crisis response efforts.

The other options, A, B, and C, are all valid reasons for incorporating cultural and linguistic competence, as it helps to better serve diverse populations, reduce health disparities, and improve the overall quality of services and outcomes provided.

Linguistic competence, as used in linguistics, refers to the unconscious knowledge one possesses when speaking a language. It differs from linguistic proficiency, which refers to any other elements that enable one to use their language in practise. All facets of the organization's activities involve language. In order to facilitate communication across the organisational chart, interact with foreign partners, and ensure the use of proper language in business communication, linguistic proficiency is necessary.

To learn more about Linguistic Competence, click here:

https://brainly.com/question/28502594

#SPJ11

During tectonic activity, rock layers and blocks may rotate due to the deformation of the Earth's crust. This can occur through various mechanisms such as folding, faulting, or shearing. In some cases, entire blocks of rock can rotate along a horizontal or vertical axis, causing changes in the orientation of the rock layers.

However, faults are a specific type of geological structure where there is movement along a fracture in the rock, either horizontally or vertically. Faults themselves do not rotate, but the blocks of rock on either side of the fault may move relative to each other, resulting in changes in the of the rock layers on either side of the fault.

It's important to note that there are some cases where faults may appear to rotate due to changes in the orientatorientation ion of the surrounding rock layers. This can occur when the fault is located at an angle to the direction of the deformation, causing the rock layers on either side of the fault to rotate slightly as they are squeezed or stretched. However, the fault itself remains fixed in place.

Learn more about geological here

https://brainly.com/question/5634603

#SPJ11

The cross-cutting relationship best allows you to determine the age relationships between folding and faulting in a given region.

The cross-cutting relationship is a principle of relative dating that states that any feature that cuts across another feature must be younger than the feature it cuts across. In the context of structural geology, this means that any fault or fold that cuts across a rock layer must be younger than the rock layer itself. By examining the relationships between folds, faults, and rock layers in a given region, geologists can determine the relative timing of events and construct a timeline of geological activity.

The other options listed, such as the law of superposition, the law of original continuity, the principle of inclusion, and the law of original horizontality, are also principles of relative dating used by geologists to determine the relative ages of rock layers and geological events. However, these principles are less applicable to determining the age relationships between folding and faulting specifically.

Learn more about geologists here:

https://brainly.com/question/13428729

#SPJ11

Based on the Grand Canyon geologic map, the minimum amount of time that elapsed between the deposition of the Paleozoic sedimentary rocks and the Quaternary volcanics is approximately 600 million years. The Paleozoic sedimentary rocks were deposited during the Paleozoic Era, which spanned from 541 million to 252 million years ago.

On the other hand, the Quaternary volcanics were formed during the Quaternary Period, which began 2.6 million years ago and continues until the present day. This means that there were several geological periods and eras, including the Mesozoic and Cenozoic eras, that occurred between the Paleozoic and Quaternary periods.

Throughout this long timespan, various geological processes such as erosion, uplift, and tectonic activity shaped the landscape of the Grand Canyon. The result of these processes is the stunning geological record that is visible in the layers of rock that make up the canyon walls. The different colors and textures of the rocks represent different periods in Earth's history, and provide valuable insights into the planet's evolution over time.

to know more about grand canyon geologic map click this link -

brainly.com/question/7513662

#SPJ11

Answer:

About 13% of Muslims live in Indonesia, the largest Muslim-majority country; 31% of Muslims live in South Asia, the largest population of Muslims in the world; 20% in the Middle East–North Africa, where it is the dominant religion; and 15% in Sub-Saharan Africa and West Africa, incl.

Explanation:

The correct answer is D. The gunflint microbiota, described by Barghoorn and Cloud, is significant because it was the first Precambrian fossil discovery, hinting at a solution to Darwin's dilemma.

It provided evidence for the existence of life on Earth at least 1.9 billion years ago, which helped to address the question of the origin of life and the evolution of complex organisms.

While it was not the first fossil find on Earth, it was one of the earliest and most important in terms of understanding the history of life on our planet. It is not just a curiosity, but a crucial piece of evidence in the study of paleontology and evolution.

To know more about Darwin's dilemma,refer to the link :

https://brainly.com/question/14353066?#

#SPJ11

Peat bogs is/are NOT an example of alternative hydrocarbon sources. The correct option is D.

Peat bogs are not an example of alternative hydrocarbon sources. While methane hydrates, oil shales, and tar sands are all sources of hydrocarbons that can be extracted and processed for energy production, peat bogs are not considered hydrocarbon sources in the same sense.

Peat bogs are a type of wetland where dead plant material accumulates and forms peat, which is a precursor to coal. Although peat can be used as a fuel source, it is not categorized as a hydrocarbon like the other options mentioned.

To recap, out of the options provided, peat bogs are NOT an example of alternative hydrocarbon sources, while methane hydrates, oil shales, and tar sands are considered alternative sources of hydrocarbons.

To know more about Peat, refer here:

https://brainly.com/question/19322338#

#SPJ11

Complete question:

________is/are NOT an example of alternative hydrocarbon sources.

a. Methane hydrate

c. Oil shales

b. Peat bogs

d. Tar sands

Answer:

People often use the words “invention” and “innovation” interchangeably. This is not only incorrect but misses a few key subtleties in meaning that can change a conversation. Invention is about creating something new, while innovation introduces the concept of the “use” of an idea or method.

Answer:

First, let's define what biotic and abiotic factors are. Biotic factors are living organisms, including plants, animals, and microorganisms. Abiotic factors, on the other hand, are non-living components such as water, sunlight, soil, and climate.

Tropical rainforests are incredibly diverse ecosystems that are home to millions of species of plants and animals. They are also incredibly important for regulating the Earth's climate and biodiversity.

Biotic factors play a crucial role in the functioning of tropical rainforests. Plants, for example, are the foundation of the rainforest ecosystem, providing the energy that fuels the entire system. They absorb sunlight and use it to photosynthesize, converting carbon dioxide and water into organic matter. This organic matter is then consumed by a variety of animals, including insects, birds, and mammals.

The animals in the rainforest also play important roles in maintaining the ecosystem. For example, some animals pollinate plants, while others disperse seeds or help to control populations of other species.

Abiotic factors are also critical to the functioning of tropical rainforests. Sunlight is perhaps the most important abiotic factor, as it provides the energy needed for photosynthesis. Water is also essential, as it is required for plant growth and plays a role in regulating the temperature of the rainforest.

Soil is another important abiotic factor, providing a habitat for a variety of organisms and acting as a nutrient source for plants. Climate also plays a significant role in the functioning of tropical rainforests. For example, the amount of rainfall and the length of the dry season can affect the types of plants that are able to grow in a given area.

In conclusion, both biotic and abiotic factors play important roles in the functioning of tropical rainforests. The diversity and complexity of these ecosystems are a testament to the intricate web of relationships between living and non-living components. By understanding these relationships, we can better appreciate the beauty and importance of these vital ecosystems.

No, the rock cycle is not a one way life cycle as of a butterfly. It demonstrates the relationships between the three main types of rocks and the long-term processes that transform them from one type to another.

- The rock cycle does not necessarily proceed in a straight line (for instance, magma igneous sedimentary metamorphic magma).

The full rock cycle takes into consideration a variety of physical processes that influence the development of distinct types of rock.

1. Weathering and Erosion-

2. Heat and Pressure-

The same heat and pressure that metamorphize igneous rock into sedimentary rock also turn sedimentary rock into metamorphic rock.

3. Melting-

All three varieties of rock have the ability to melt back into magma at any point, restarting the cycle.

Therefore, The rock cycle is an ongoing, participatory process. It has neither a beginning nor an end. The rock cycle involves the ongoing formation, modification, and reformation of rocks.

Hence, it is not a one-way process.

To know more about Rock Cycle visit:

https://brainly.com/question/29767269

#SPJ1

The energy that drives longshore currents is derived from wind waves approaching the beach front at an angle. As waves approach the shore, they create a zig-zag pattern that pushes water along the coast. This results in the development of a longshore current, which can be powerful enough to move sediment and create sandbars. Hurricanes and cyclones can contribute to the energy of longshore currents, but they are not the primary source. Major surface currents, such as the Gulf Stream, and monthly high tides do not directly drive longshore currents.

Longshore currents are generated when a "train" of waves reach the coastline and release bursts of energy. The speed at which waves approach the shore depends on sea floor and shoreline features and the depth of the water.A longshore current is a current that flows parallel to the shore within the zone of breaking waves. Longshore currents develop when waves approach a beach at an angle (Figure 12.37). Longshore currents cause sediment transport called longshore drift.

TO KNOW MORE ABOUT longshore currents CLICK THIS LINK -

brainly.com/question/29800365

#SPJ11

Sandstone, mudstone, fossiliferous/oolitic limestone, sand ridges, and tempestites are all possible features of the continental shelf, which is a progression in grain size away from the coast. commonly known as the passive margin, a large, shallow region.

Geologists typically refer to the area of the continental margin that is located between the shoreline and the shelf break or, in the absence of a discernible slope, between the shoreline and the location where the depth of the water immediately adjacent to the shore is approximately between 100 and 200 meters.

A continent's oceanic edge is referred to as its continental shelf. The seven primary geographic divisions on Earth are known as continents. A continental shelf extends from the shoreline of a continent to a point where it drops off, which is referred to as the shelf break.

Learn more about continental shelf: https://brainly.com/question/383674

#SPJ1

Sandstone, mudstone, fossiliferous/oolitic limestone, sand ridges, and tempestites are all possible features of the continental shelf, which is a progression in grain size away from the coast. commonly known as the passive margin, a large, shallow region.

Geologists typically refer to the area of the continental margin that is located between the shoreline and the shelf break or, in the absence of a discernible slope, between the shoreline and the location where the depth of the water immediately adjacent to the shore is approximately between 100 and 200 meters.

A continent's oceanic edge is referred to as its continental shelf. The seven primary geographic divisions on Earth are known as continents. A continental shelf extends from the shoreline of a continent to a point where it drops off, which is referred to as the shelf break.

Learn more about continental shelf: https://brainly.com/question/383674

#SPJ1

The patterns of cell phone use that is mots correct is B. People in Pakistan often use their phones to access the Internet.

According to research, the people in Pakistan often use their cell phones to access the internet as Pakistan Telecommunication Authority found that nearly half of all mobile phone users in the country regularly use their devices to go online.

This trend is expected to continue as the country's mobile network infrastructure expands and more people gain access to affordable smartphones.

Read more about cell phone use

brainly.com/question/23433108

#SPJ1

During times when precipitation exceeds potential evapotranspiration, there can be various pathways for the excess water like water may go into deep percolation as groundwater, extra water goes into soil-water recharge, and there cannot be a deficit.

One pathway is deep percolation into the groundwater system. This means that the water infiltrates through the soil and accumulates in the saturated zone below the surface. Groundwater can then be used for various purposes such as drinking water, irrigation, and industrial processes.

Another pathway for excess water is soil-water recharge. This occurs when the soil is not at field capacity and can still absorb more water. The water infiltrates through the soil and replenishes the soil moisture, which can benefit vegetation and crops. However, if the soil is already at field capacity, the excess water can result in surface runoff and erosion.

It is important to note that during times when precipitation exceeds potential evapotranspiration, there cannot be a deficit. This means that all the water that enters the system will be used in some way, whether it is through groundwater recharge or soil-water replenishment. Understanding these pathways can help in managing water resources and ensuring that they are used in a sustainable manner.

Know more about groundwater here:

https://brainly.com/question/14241380

#SPJ11

For people to live better lives, basic amenities like power and energy, water and sanitation, garbage and waste management are essential.

Both provincial governments and local governments manage substantial public road networks and contribute to or provide services linked to public transit. They also actively administer elements of planning and regulatory frameworks that govern land use, have an impact on the development of infrastructure, and foster economic activity.

A municipality is supposed to: (a) arrange and manage its administrative, financial, and planning procedures to prioritize the community's basic needs and to promote the community's social and economic progress; and (b) participate in federal and provincial development programs.

Learn more about local governments: https://brainly.com/question/31333519

#SPJ1

The reason the sun's rate of fusion must gradually rise over billions of years is because fusion is a process that requires extremely high temperatures and pressures to occur. As the sun's core converts hydrogen into helium, the helium builds up and causes the core to contract, which in turn raises the temperature and pressure. This increase in pressure and temperature allows for more fusion to occur, which leads to even more helium buildup and contraction. This cycle continues, with the core getting hotter and denser over time, until the sun reaches a point where it can no longer sustain fusion. Therefore, the gradual rise in the sun's rate of fusion is necessary for the long-term sustainability of its energy production.

Hi! The sun's rate of fusion must gradually rise over billions of years due to the following reasons:

1. Hydrogen depletion: As the sun consumes hydrogen in its core through nuclear fusion, the amount of available hydrogen decreases over time. This causes the fusion reactions to become less efficient, requiring a gradually increasing rate of fusion to maintain the sun's energy output.

2. Gravitational contraction: As the sun loses mass through fusion, its gravitational force decreases. To counterbalance this loss and maintain equilibrium, the sun contracts, increasing the pressure and temperature in its core. This causes the rate of fusion to gradually rise.

3. Helium accumulation: As fusion continues, helium accumulates in the sun's core. Helium has a higher fusion temperature than hydrogen, so as more helium accumulates, the core temperature must rise to sustain fusion reactions. This causes the rate of fusion to gradually rise over time.

In summary, the sun's rate of fusion must gradually rise over billions of years due to hydrogen depletion, gravitational contraction, and helium accumulation, which together affect the core's pressure, temperature, and fusion efficiency.

Learn more about gradually rise here:

https://brainly.com/question/23323563

#SPJ4

Religion: Hinduism

Founder: No single founder

Date Founded: No specific date of founding

Faith Book: Vedas, Upanishads, Bhagavad Gita, and other texts

In continuation:

Religion: Buddhism

Religion: Taoism

Read more about religion  here:

https://brainly.com/question/11541955

#SPJ1

Religion

Hinduism

Buddhism

Taoism

Founder

Date Founded

Faith Book

Place of Worship

Basic Beliefs

Holy Days

# of Followers

Followers Referred to As

Proselytizing (Yes/No)

Religion: Hinduism

Founder: No single founder

Date Founded: No specific date of founding

Faith Book: Vedas, Upanishads, Bhagavad Gita, and other texts

What is the religion about?

In continuation:

Place of Worship: Temples, shrines, and other sacred places

Basic Beliefs: Belief in the concept of karma, reincarnation, and multiple gods and goddesses. Emphasis on the pursuit of dharma (righteousness), artha (material wealth), kama (pleasure), and moksha (liberation from the cycle of birth and death).

Holy Days: Diwali, Holi, Navaratri, and others depending on regional and local traditions

Number of Followers: Approximately 1.2 billion

Followers Referred to As: Hindus

Proselytizing (Yes/No): Not in the traditional sense, but some Hindu organizations do engage in outreach and conversion efforts.

Religion: Buddhism

Founder: Siddhartha Gautama (Buddha)

Date Founded: 5th century BCE

Faith Book: Tripitaka (Pali Canon) and other texts

Place of Worship: Temples, monasteries, and other sacred places

Basic Beliefs: The Four Noble Truths and the Eightfold Path. Emphasis on the concepts of impermanence, non-self, and the cessation of suffering through the attainment of enlightenment (nirvana).

Holy Days: Vesak, Asalha Puja, and other festivals depending on regional and local traditions

Number of Followers: Approximately 500 million

Followers Referred to As: Buddhists

Proselytizing (Yes/No): Some Buddhist organizations engage in outreach and conversion efforts, but there is no centralized authority or commandment to do so.

Religion: Taoism

Founder: Laozi (possibly legendary)

Date Founded: 4th century BCE (Dao De Jing written)

Faith Book: Dao De Jing and other texts

Place of Worship: Temples, shrines, and other sacred places

Basic Beliefs: The concept of the Tao (the way), Yin and Yang, and the pursuit of harmony with nature and the universe. Emphasis on simplicity, humility, and detachment from worldly desires.

Holy Days: Qingming Festival, Taoist festivals vary depending on regional and local traditions

Number of Followers: Estimates range from 20-30 million

Followers Referred to As: Taoists

Proselytizing (Yes/No): Generally, Taoism does not seek to convert others and emphasizes personal spiritual development rather than institutional growth.

The learning objectives of this lecture tutorial are to help students distinguish between chemical and physical weathering and to relate parent material to the type of weathering that is likely to occur.

After completing this lecture tutorial, students should be able to distinguish between chemical and physical weathering and relate parent material to the type of weathering that is likely to occur.
Part 1: Comparison of Chemical and Physical Weathering
1. When you put salt (the mineral halite) in hot water, after 10 minutes, you cannot see the salt in the water. This is because the salt undergoes chemical weathering, where it dissolves in the water and forms a homogeneous solution.
2. When you put sand (the mineral quartz) in hot water, after 10 minutes, you can still see the sand in the water. The sand undergoes physical weathering, where it remains as solid particles suspended in the water. The sand is different from the salt because it does not dissolve and remains visible in the water.

Learn more about  Physical Weathering here:

https://brainly.com/question/14426457

#SPJ11

Coastal cities like San Diego often have a smaller air temperature range than inland cities because of the moderating effect of water bodies. Water has a higher specific heat capacity than land, which means it can absorb and store a lot of heat energy before its temperature changes significantly. As a result, coastal areas experience milder temperatures than inland areas, where temperatures can fluctuate more dramatically.

During the day, when the sun is shining, land surfaces heat up quickly and become much hotter than nearby water bodies. This causes the air above the land to rise and cooler air from over the water to flow in and replace it. This flow of cooler air from the water is known as a sea breeze. The sea breeze helps to cool down the land and keep temperatures relatively stable, preventing the temperature from rising too high.

At night, the opposite happens, and land surfaces lose heat more quickly than water bodies. This causes the air over the land to cool rapidly and sink, while warmer air from over the water rises to replace it. This flow of warmer air from the water is known as a land breeze. The land breeze helps to warm up the land and prevent temperatures from dropping too low.

In summary, coastal cities like San Diego often have a smaller air temperature range than inland cities because of the moderating effect of water bodies. Water absorbs and stores heat energy, which helps to stabilize temperatures and prevent large temperature fluctuations.

To know more about Coastal cities click this link-

brainly.com/question/13850060

#SPJ11

The factors that make the climates different at Missoula and Cape Elizabeth are: D. latitude and proximity to large bodies of water.

Missoula is located inland at a higher altitude, which results in a continental climate with cold winters and warm summers.

Cape Elizabeth, on the other hand, is located on the coast and is influenced by the nearby ocean, resulting in a maritime climate with milder temperatures throughout the year. While altitude can also impact climate, it is not the primary factor that distinguishes the climates of these two locations.

Therefore, we can state that the factors that make the climates different at Missoula and Cape Elizabeth are: D. latitude and proximity to large bodies of water.

Learn more about climate on:

https://brainly.com/question/29321529

#SPJ1

The factors that make the climates different at Missoula and Cape Elizabeth are: D. latitude and proximity to large bodies of water.

Missoula is located inland at a higher altitude, which results in a continental climate with cold winters and warm summers.

Cape Elizabeth, on the other hand, is located on the coast and is influenced by the nearby ocean, resulting in a maritime climate with milder temperatures throughout the year. While altitude can also impact climate, it is not the primary factor that distinguishes the climates of these two locations.

Therefore, we can state that the factors that make the climates different at Missoula and Cape Elizabeth are: D. latitude and proximity to large bodies of water.

Learn more about climate on:

https://brainly.com/question/29321529

#SPJ1

Answer: The mass wasting process most likely to affect the area around tilted mountain is rock slide.

Explanation:

Rock slides occur when large sections of rock break away from a slope and slide downhill, often due to the presence of fractures or weaknesses in the rock. This type of mass wasting is more common on steep slopes and in areas with rugged terrain.

Answer:

Explanation: of a super hi standerd

The region of a continent that has been structurally stable for a long period of time is called a craton. A craton is a large, stable block of the Earth's crust that has been relatively unaffected by tectonic activity for billions of years.

These regions are typically found in the interiors of continents and are characterized by thick, ancient rocks that have been folded and uplifted, but not significantly deformed or destroyed by tectonic forces. Cratons are important for understanding the evolution of the Earth's crust and the formation of continents.

They provide valuable information about the geological history of the planet and have been studied extensively by geologists and geophysicists. Some of the most well-known cratons include the Canadian Shield, the Siberian Platform, and the African Shield.

To know more about craton visit:

https://brainly.com/question/31380649

#SPJ11

Numerical Dating is best used to identify when each rock type formed. Numerical Dating is the process of assigning an age to a rock in terms of numbers, usually in millions of years before present.

Numerical dating is a technique used to assign specific dates to geological events. It involves the evaluation of numerical data, such as radiometric age determinations, stratigraphic correlations, and other numerical evidence. Radiometric age determinations provide numerical data that allow geologists to assign absolute ages to specific geologic events.

This method of dating is most commonly used to determine the age of igneous rocks.
Relative Dating is best used to determine the sequence of events in the formation of rocks. Relative Dating does not assign an age to a rock, but instead it looks at the sequence of events and the relationships between different rock types. It is most commonly used to date sedimentary and metamorphic rocks.

To learn more about Numerical Dating
https://brainly.com/question/1616122
#SPJ1