Answer:
Intelligence Analysis in a Cycle. Analysis resides within the larger intelligence cycle. The intelligence cycle determines the daily activities of the Intelligence Community. It starts with the needs of the intelligence "consumers' such as policymakers, military officials, and other decision makers who need intelligence for their activities.
Explanation:
can i get brainlist
Answer:
The Intelligence Community's daily activities are determined by the intelligence cycle. It begins with the requirements of intelligence "consumers," such as policymakers, military officials, and other decision-makers who require intelligence to carry out their tasks.
Explanation:
Hope it helps
The compound ammonium sulfate consists of two ions, NH4+ and SO42–, both of which are
as heat is added to melt ice. Does the temperature change?
Answer:
Depending on the deformity it will depend on the amount of the ice that is melted,it the majority is melted that is relevant to the heated liquid melting the ice,so yes only the water formalities of the melted ice.
how does the body and brain react when u are developing feelings for someobody?
Step 2: Predict the Number of Nuclei at Each Half-Life
0.5"
Using the values from Step 1, predict the pattern
for the decay of 100 atoms over the course of eight
half-life cycles, Round to the nearest whole
number of atoms. Record in the appropriate
blanks
Time- Half-
Life Cycles, no
Initial
Radioactive Atoms
(Predicted)
100
1
1
0.5
А
2
0.25
A= 27
25
3
0.125
B
B = 16
4.
0.0625
6
C = 9
5
0.03125
С
D=4
6
0.015625
D
7
0.0078125
1
E
8
0.00390625
E
DONE
) Intro
Answer:
A=50
B=13
C=3
D=2
E=0
Explanation:
How do you know how to order an empirical formula?
Answer:
Start with the number of grams of each element, given in the problem. the mass of each element = the percent given. Convert the mass of each element to moles using the molar mass from the periodic table. Divide each mole value by the smallest number of moles calculated.
what happens when phosphorus forms an ion?
Answer:
Phosphorus would form a -3 charge
Explanation:
Phosphorus has five outer electrons that can bind atoms. As a result, Phosphorus forms a ion has a charge of -3.
how many core electrons are there in a sodium atom?
Answer:
There are 13 core electrons in a sodium atom.
A compound contains 9.50 moles of carbon, 9.60 moles of hydrogen and 2.38 moles of sulfur. The molar mass of the compound is 168 grams per mole. What is the empirical and molecular formula of the compound?
Answer :
C4H4S and C8H8S2
construct a Device to Regulate the
Release of Energy - Student Guide
PLEASE WRITE IN LAB REPORT FORM ASAP PLEASE HELP 75 POINTS WILL MARK BRIANLIEST
Answer:
Hi there
Thermal Energy and Chemical Reactions
The device controlled the activation as shown by the water holding room temperature for 15 seconds until activation by crushing the pills. The temperature rose 30° over two minutes,showing a measurable exothermic reaction from the Calcium Chloride dissolving in the water.
Pour 5mL water in a quart bag
Place Thermometer in the bag to make contact
Fill two gelatin 000 capsules with 1 gram of Calcium Chloride
Place capsules into the bag
Wait 15 seconds to crush the capsules while they are submerged in the water
-Temperature
0 seconds 75 degrees
15 seconds - Activation 75 degrees
30 seconds 85 degrees
60 seconds 95 degrees
90 seconds 104 degrees
120 seconds 105 degrees
Conclusion: During a reaction, thermal energy from the environment is converted into chemical energy stored in the products.
Brainliest plz
why does a diprotic acid dissociate in a stepwise manner
Because they have the ability to supply exactly two protons.
Hope this helps!
A diprotic acid dissociates in a step wise manner as it has two protons and it looses one proton each in each dissociation step.
What are acids?Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste. Compounds HCl, H₂SO₄ and HNO₃ are acids as they yield H+ ions on dissociation.
According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic acids depending on the number of protons which are liberated on dissociation.
Acids are widely used in industries for production of fertilizers, detergents batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.
Learn more about acids,here:
https://brainly.com/question/1512259
#SPJ2
Which of the following is the best definition of deposition in geology?(1 point)
A:the creation of volcanic rock when liquid magma hits the ocean and cools
B:the mixing of many layers of sediment by wind, water or ice
C:laying down of sediment in layers carried by wind, water or ice
D:the creation of any metamorphic rock
Answer:
Deposition is the laying down of sediment carried by wind, flowing water, the sea or ice. Sediment can be transported as pebbles, sand and mud, or as salts dissolved in water.
mixture requires constant shaking to keep its constituents combined. It is best described as a _____.
homogenous mixture
colloid
suspension
solution
Answer:
[tex] \tiny \tt \: [/tex]
Suspension
what is the molecular formula of linoleic acid?
Answer:
C18H32O2
Explanation:
This is it, i hope it helps Good luck.
the largest source of anthropogenic greenhouse gases in the united states is
Answer:
Human activities are responsible for almost all of the increase in greenhouse gases in the atmosphere over the last 150 years. The largest source of greenhouse gas emissions from human activities in the United States is from burning fossil fuels for electricity, heat, and transportation.
BALANCED WORD EQUATION Aluminium carbonate + hydrochloric acid -->
Answer: 2Al+6HCl→2AlCl3+3H22Al+6HCl → 2AlCl3 + 3H2
Explanation:
EXPERIMENT 4 : TYPES OF PLATE BOUNDARY
Answer:
Movement in narrow zones along plate boundaries causes most earthquakes. Most seismic activity occurs at three types of plate boundaries—divergent, convergent, and transform. As the plates move past each other, they sometimes get caught and pressure builds up.
Explanation:
How many grams of solute are needed to order to prepare 100.00 mL of a 0.1000 M solution of a compound with a molecular weight of 350.0 g/mol
Answer:
i got 35 but i am as lost as you are so don't really take my answer as a trusted answer
The grams of solute are required.
The mass of solute is 3.5 g
c = Molarity = 0.1 M
M = Molar mass = 350 g/mol
V = Volume of solution = 100 mL = 0.1 L
n = Number of moles
m = Mass of solute
Molarity is given by
[tex]c=\dfrac{n}{V}\\\Rightarrow n=cV\\\Rightarrow n=0.1\times 0.1\\\Rightarrow n=0.01\ \text{moles}[/tex]
Molar mass is given by
[tex]M=\dfrac{m}{n}\\\Rightarrow m=Mn\\\Rightarrow m=350\times 0.01\\\Rightarrow m=3.5\ \text{g}[/tex]
The mass of solute is 3.5 g
Learn more:
https://brainly.com/question/16633651?referrer=searchResults
1. A box of hardware contains 100 pieces. Assuming there are 25 pieces in each vial, calculate the
mass of a box of each kind of hardware. Express these values in units of g/box
Answer:
fofo you for your patience and
The question is incomplete.
Following things are required to solve the question:-
Mass of the vileMass of the piecesWithout the information we can not solve the question. Therefore, please provide with the incomplete information.
For more information, refer to the link:-
https://brainly.com/question/2817451
When glucose is broken down in an atmosphere where oxygen supply is limited, a 3-carbon compound known as ________ accumulates in the muscle.
Answer: Lactate!
Explanation:Hope this helps!!!
An electron moved from a lower energy level to a higher energy level. What most likely happened during the transition? (4 points)
Group of answer choices
A random amount of light was released.
A fixed amount of energy was absorbed.
A fixed amount of energy was released.
A random amount of light was absorbed.
Answer:
A. A random amount of light was released
Explanation:
A random amount of light was released. Hence, option A is correct.
What are electrons?An electron is a negatively charged subatomic particle. It can be either free (not attached to any atom) or bound to the nucleus of an atom. Electrons in atoms exist in spherical shells of various radii, representing energy levels. The charge on a single electron is considered the unit electrical charge.
Electrons are sub-atomic particles that occupy energy levels in an atom of any chemical element. These electrons may move from one energy level to another.
Electrons may move from a lower energy level or ground state to an excited state or high energy level, or else move from a higher energy level to a lower energy level.
When an electron moves from a lower energy level to a higher energy level energy is absorbed by the atom, and when the movement is from a higher energy level to lower energy is released mainly as light.
Hence, option A is correct.
Learn more about electrons here:
https://brainly.com/question/2293721
#SPJ5
Which are characteristics of matter? (Select all that apply)
A. Created from mixtures
B. Takes up space
C. Makes up atoms
D. Has mass
Answer:
B and D.
Explanation:
Matter takes up space and has mass.
Answer:
B and D
Explanation:
It is because matter is anything that has mass (weight) and can occupy space
Explain why reaction speed increases with temperature.
what volume will 28.0 g of O2 occupy at STP?
Considering the definition of STP conditions, 28 grams of O₂ will ocupy at STP 19.6 L.
The STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
On the other side, the molar mass of substance is a property defined as its mass per unit quantity of substance, in other words, molar mass is the amount of mass that a substance contains in one mole.
In this case, you have 28 g of O₂. The molar mass es 32 [tex]\frac{g}{mole}[/tex]
Next, you can apply the following rule of three: if 32 grams of the compound are contained in 1 mole, 28 grams are contained in how many moles?
[tex]number of moles=\frac{28 gramsx1 mole}{32 grams}[/tex]
number of moles= 0.875 moles
Now, you can apply the following rule of three: if by definition of STP conditions 1 mole of O₂ occupies a volume of 22.4 liters, 0.875 moles occupies how much volume?
[tex]volume=\frac{0.875 molesx22.4 L}{1 mole}[/tex]
volume= 19.6 L
Finally, 28 grams of O₂ will ocupy at STP 19.6 L.
Learn more:
https://brainly.com/question/3773297?referrer=searchResultshttps://brainly.com/question/9901446?referrer=searchResultsbrainly.com/question/12695086?referrer=searchResultshttps://brainly.com/question/15507610?referrer=searchResultshttps://brainly.com/question/14260169?referrer=searchResultshttps://brainly.com/question/14831640?referrer=searchResults
MULTIPLE CHOICE
What is the molality (m) of 3.5 mol of sugar in 2.5 kg of water?
The molality of the solution is 1.4 moles per kilogram (molal).
The molality of the solution is equal to the number of moles of sugar (solute) divided by the number of kilograms of water (solvent). Hence, the molality is determined below:
[tex]m = \frac{3.5\,mol}{2.5\,kg}[/tex]
[tex]m = 1.4\,\frac{mol}{kg}[/tex]
The molality of the solution is 1.4 moles per kilogram (molal).
We kindly invite to check this question on molality: https://brainly.com/question/4580605
11.Three atoms of element X react with an element(s) Y from group VIA. What
would be the chemical formula between X and Y.
Element “X” belongs to family 2A, meaning it is part of the family that includes elements such as Be and Mg. These elements will all have 2 valence electrons and can be represented by the following Lewis diagram:
Element “Y” belongs to family 5A, meaning it is part of the family of elements that includes elements such as N and P. These elements will all have 5 valence electrons and can be represented by the following Lewis diagram:
Atoms from these two families will usually react with each other by losing or gaining valence electrons to create stable ions (an ion is what we call an atom/particle that has a charge). These stable ions form by the atoms either losing or gaining electrons until they have the same number of valence electrons as the nearest Noble Gas. This means that each ion will have a full valence shell (usually consisting of 8 electrons), often referred to as a “stable octet”, and this process of creating stable ions is often called the “octet rule”.
Atoms with fewer that 4 valence electrons will normally have a weak hold on their valence electrons and will tend to lose their valence electrons when forming ions.
Atoms with 4 or more valence electrons will normally have a strong hold on their valence electrons and will tend to gain electrons when forming ions.
The charge on the ion arises from the fact that, initially, the atom is electrically neutral because it has the same number of electrons (negative charges) as protons (positive charges). By losing electrons, the atom will end up with more protons (positive charges) than electrons (negative charges) and will form an ion with an overall positive charge. By gaining electrons, the atom will end up with more negative electrons than positive protons becoming an ion with an overall negative charge.
So, an atom of element “X”, with only 2 valence electrons, must lose its 2 valence electrons (which will be gained by element “Y”) to form a stable ion with a 2+ charge (losing two electrons leaves the ion with 2 more positive charges (protons) than negative charges, so a net charge of 2+).
An atom of element “Y”, with 5 valence electrons, must gain 3 electrons (from element “X”) to form a stable ion with a 3- charge (gains 3 extra negative charges).
We can show this process using Lewis diagrams:
From this set of diagrams you can see that in order to create stable ions of both “X” and “Y” we need these atoms to react with each other in a 3:2 ratio (we need 3 atoms of X for every 2 atoms of Y). This means that the resulting chemical formula of the compound will be:
Now, we will look at a short cut that can help you figure this out without having to draw Lewis diagrams.
Compounds are electrically neutral, meaning they must contain equal numbers of positive and negative charges. For compounds consisting of oppositely charged ions, this means that the total charge of the negative ions must be equal to the total charge of the positive ions. In other words the ions must combine in a ratio that makes their charges add to zero.
If we look at the compound we just made, X3Y2, we can confirm this:
So, now you can you predict the formula of simple ionic compounds:
from the family of elements, determine the number of valence electrons each element has
determine the charge of the ions that each atom will form using the octet rule (or look on the periodic table, most will tell you the stable ionic charges that each element can form)
determine the ratio of positive ions to negative ions that results in an overall charge of zero
Example,
What is the formula of a compound produced when an element from family 3A combines with an element from family 7A?
What is the average acceleration of the car between 24 and 40 seconds? Include the correct units.
Answer:
16
Explanation:
40 - 24 16
how many moles of iron are present in 3.15 × 10^24 atoms of iron?
Answer:
5.23 moles
Explanation:
How many moles of iron are present in 3.15 × 10^24 atoms of iron?
1 mole has 6.02 X 10^23 particles
so
3.15X10^ 24 atoms =( 3.15 X 10^24)/(6.02 X 10^23) =(3.15/6.02 )X 10 =
5.23 moles
What will a wave look like with high amplitude and long wavelength?
A. Tall and narrow
B. Short and narrow
C. Tall and wide
D. Short and wide
Answer:
A tall and narrow A tall and narrow
Explanation:
Answer:
A. Tall and Narrow
Explanation:
The frequency of a wave is inversely proportional to its wavelength. That means that waves with a high frequency have a short wavelength, while waves with a low frequency have a longer wavelength. But high amplitude waves tend to be short spent and tall narrow linings.
how many valence electrons are there in an argon atom?
Answer:
There are 8 valence electrons in an argon atom.
Write a 4-6 sentence paragraph using science vocabulary, full sentences, proper grammar, and details explaining the difference between plant cells and animal cells. Science...
Answer:
Plant cells and animal cells are both eukaryotic cells. They both have a nucleus, Golgi complex, endoplasmic reticulum, ribosomes, mitochondria, cytoskeleton and cell membrane. Only plants cells have a vacuole, cell wall and chloroplast, while animal cells have cilia, centrioles and lysosomes which plant cells don't usually have. Because of their cell walls plant cells are in rigid rectangular shapes while animal cells have looser round shapes. The main difference in their functions is that animals don't produce their own food while plan cells do.