Draw molecules that satisfy the following prompts:
1. All molecules must have a minimum of 12 Carbon atoms and exactly 3 heteroatoms (not carbon or hydrogen atoms).
2. You may not use the same molecule twice for any parts of this question.
4. You do not need to look up solubility information, but the answers must be reasonable (supported by the concepts that we have discussed). Also, the structures must be reasonable (improper structures, e.g. carbon with 5 bonds or oxygen with one bond and no charge, will not receive any credit).
a. Draw two non-charged molecules that will be separated once they are placed in a separatory funnel that contains 2.5 M HCl(aq) and dichloromethane.
b. Draw two non-charged molecules that will be separated once they are placed in a separatory funnel that contains 2.5 M NaOH(aq) and dichloromethane.
c. Draw two non-charged molecules that will be separated using neutral water and dichloromethane and in a separatory funnel.
Answers
Answer:
see images attached
Explanation:
Here we are trying to perform solvent extraction. In solvent extraction, there must be an aqueous phase and an organic phase.
One of the species to be separated is extracted in greater concentration in the aqueous phase while the other is extracted in greater concentration in the organic phase.
The phase into which each specie is extracted depends on the nature of the specie.
Two structures are shown in the images attached that will be separated by the methods shown in (a) (b) (c) in the question
Related Questions
Plz answer me will mark as brainliest
Answers
Explanation:
Valves
Blood capillaries
What is the frequency of a wave having 4.90 x 10 -12 J of energy?
Answers
Answer:
The answer is
[tex] \huge 7.40 \times {10}^{21} Hz[/tex]
Explanation:
To find the frequency of the wave we use the formula
[tex]f = \frac{E}{h} \\ [/tex]
where
E is the energy
f is the frequency
h is the Planck's constant which is
6.626 × 10-³⁴ Js
From the question
E = 4.90 × 10-¹² J
So we have
[tex]f = \frac{4.90 \times {10}^{ - 12} }{6.626 \times {10}^{ - 34} } \\ [/tex]
We have the final answer as
[tex]7.40 \times {10}^{21} \: \: Hz[/tex]
Hope this helps you
Why aren’t two hydrogen atoms bonded together considered a compound? Explain.
Answers
Answer:
Hydrogen gas (H2) is a molecule, but not a compound because it is made of only one element. Water (H2O) can be called a molecule or a compound because it is made of hydrogen (H) and oxygen (O) atoms. There are two main types of chemical bonds that hold atoms together: covalent and ionic/electrovalent bonds.
For the solution resulting from dissolved 0.32 g of naphthalene (C10H8) in 25 g of benzene (C6H6) at temperature of 26.1°C, calculate the vapor pressure lowering, the boiling point elevation, and the freezing point depression. The vapor pressure of benzene at the temperature of the experiment is 100 torr. (Kf of benzene = 2.67 °C/m, Kb of benzene = 5.12 °C/m)
Answers
Answer:
See explanation
Explanation:
Number of moles of naphthalene = 0.32g/128.1705 g/mol = 0.0025 moles
Molality = number of moles/ mass of Solvent in kilograms
Molality = 0.0025/0.025 Kg
Morality = 0.1 m
But
∆T= K × i × m
Where ∆T = boiling point elevation
i= number of particles (this is equal to 1 because naphthalene is molecular and not ionic)
m= molality of naphthalene = 0.1 m
K= boiling point elevation constant = 5.12 °C/m
∆T= 5.12 °C/m ×0.1 = 0.512°C
For freezing point depression
∆T= K× i × m
Where ∆T= freezing point depression
i= number of particles (this is equal to 1 because naphthalene is molecular and not ionic)
m= molality of naphthalene = 0.1 m
K= freezing point depression constant = 2.67 °C/m
∆T= 2.67 °C/m ×0.1 = 0.267°C
From Raoult's law;
∆P = XBPA°
Where;
∆P = vapour pressure lowering
XB = mole fraction of solute
PA° = vapour pressure of pure solvent
Number of moles of solvent = mass/molar mass = 25g/ 78 g/mol= 0.3205 moles
Total number of moles = number of moles of solute + number of moles of solvent = 0.0025 moles + 0.3205 moles = 0.323 moles
Mole fraction of solute = 0.0025 moles/0.323 moles = 0.0077
Vapour pressure of benzene = 100 torr
Therefore;
∆P = 0.0077 × 100torr = 0.77 torr
Hence;
∆P = 0.77 torr
For each of the following molecules draw the Lewis structure on a separate sheet of paper. MAKE SURE TO FOLLOW THE RULES FROM CLASS (ie do not break the octet rule unless necessary to connect all the atoms). Then based on your structure indicate:
the total number of valence electrons.
the electronic and molecular shapes (choose from: linear, trigonal planar, bent, tetrahedral, trigonal pyramidal, trigonal bipyramidal, seesaw, T-shaped, octahedral, square pyramidal, or square planar).
whether or not the molecule is polar (Y/N).
Note: The central atom is the first atom listed, except for HCN, H2CO, and OCN-, where carbon is the central atom (underlined).
Formula Valence electrons Electronic Shape Molecular Shape Polar (Y/N)
HCN
PH3
CHCl3
NH4+
H2CO
SO42-
SeF2
CO2
O2
ClO4-
HBr
PF5
BeH2
PO43-
BH3
Br3-
Answers
Answer:
Kindly check the explanation section.
Explanation:
Without mincing words let us dive right into the solution to the question above, taking each compound at a time.
NB: Kindly Check attachment for the Lewis Structure of each of the chemical compounds.
Therefore, the number of valence electrons, electronic shape, molecular shape and whether the molecules are polar(Polarity) is given below for each chemical compound.
(1). Compound: HCN
(a). number of valence electrons = 10.
(b). electronic shape =linear.
(c). molecular shape = linear.
(d). Polarity = Y.
(2). Compound: PH3
(a). number of valence electrons = 8.
(b). electronic shape = Tetrahedral.
(c). molecular shape = Trigonal Pyramidal.
(d). Polarity = Y.
(3). Compound: CHCl3.
(a). number of valence electrons = 26.
(b). electronic shape = tetrahedral.
(c). molecular shape = tetrahedral.
(d). Polarity = Y.
(4). Compound: NH4^+
(a). number of valence electrons = 8
(b). electronic shape = tetrahedral
(c). molecular shape = tetrahedral
(d). Polarity = Y.
(5). Compound: H2CO
(a). number of valence electrons = 12.
(b). electronic shape = Trigonal planar.
(c). molecular shape = Trigonal planar
(d). Polarity = Y.
(6). Compound: SO4^2-
(a). number of valence electrons = 32.
(b). electronic shape = Tetrahedral.
(c). molecular shape = Tetrahedral.
(d). Polarity = N.
(7). Compound: SeF2.
(a). number of valence electrons = 20.
(b). electronic shape = Tetrahedral.
(c). molecular shape = bent.
(d). Polarity = Y.
(8). Compound: CO2.
(a). number of valence electrons = 16.
(b). electronic shape = linear.
(c). molecular shape = linear.
(d). Polarity = N.
(9). Compound: O2
(a). number of valence electrons = 32.
(b). electronic shape = Trigonal planar.
(c). molecular shape = Linear.
(d). Polarity = N.
(10). Compound: ClO4-.
(a). number of valence electrons = 32.
(b). electronic shape = Tetrahedral.
(c). molecular shape = Tetrahedral.
(d). Polarity = N.
(11). Compound: HBr.
(a). number of valence electrons = 8.
(b). electronic shape = Linear.
(c). molecular shape = Linear.
(d). Polarity = Y.
(12). Compound: PF5.
(a). number of valence electrons = 40.
(b). electronic shape = Trigonal Bipyramidal.
(c). molecular shape = Trigonal Bipyramidal.
(d). Polarity = N.
(13). Compound: BeH2.
(a). number of valence electrons = 4.
(b). electronic shape = Linear.
(c). molecular shape = Linear.
(d). Polarity = N.
(14). Compound: PO4^3-.
(a). number of valence electrons = 32.
(b). electronic shape = Tetrahedral.
(c). molecular shape = Tetrahedral.
(d). Polarity = N.
(15). Compound: BH3.
(a). number of valence electrons = 6.
(b). electronic shape = Trigonal planar.
(c). molecular shape = Trigonal planar.
(d). Polarity = N
(16). Compound: Br3-.
(a). number of valence electrons = 32.
(b). electronic shape = Trigonal Bipyramidal.
(c). molecular shape = Linear.
(d). Polarity = N.
Is lead a representative metal or transitional metal?
Answers
Answer:
It's a representative metal
Explanation: Transitional metals are metals of various chemical elements and have valence electrons—i.e., electrons that can participate in the formation of chemical bonds.
How many milliliters of 10.7 M perchloric acid solution should be used to prepare 5.50 L of 0.200 M
Answers
Answer:
102.8 mL.
Explanation:
From the question given above, the following data were obtained:
Molarity of stock solution (M1) = 10.7 M
Molarity of diluted solution (M2) = 0.2 M
Volume of diluted solution (V2) = 5.5 L
Volume of stock solution needed (V1) =.?
The volume of the stock solution needed can be obtained by using the following formula:
M1V1 = M2V2
10.7 × V2 = 0.2 × 5.5
10.7 × V2 = 1.1
Divide both side by 10.7
V2 = 1.1 / 10.7
V2 = 0.1028 L
Finally, we shall convert 0.1028 L to millilitres (mL) in order to obtain the desired result. This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.1028 L = 0.1028 L × 1000 mL / 1 L
0.1028 L = 102.8 mL
Therefore, 0.1028 L is equivalent to 102.8 mL.
Thus, 102.8 mL of the stock solution (i.e perchloric acid) is needed.
Which statement describes how this rock was likely formed?
slow cooling of magma beneath the surface of Earth
rapid cooling of magma beneath the surface of Earth
slow cooling of lava on the surface of Earth
rapid cooling of lava on the surface of Earth
I will mark Brainlyest
Answers
Answer:
A
Explanation:
Slow cooling of magma beneath the surface of earth
To solve this we must be knowing each and every concept related to rock and its formation. Therefore, the correct option is option A among all the given options.
What is rock?Rock is a naturally occurring mineral aggregate that is cohesive and composed of one or even more minerals. These aggregates often take the shape of recognisable and mappable volumes and are the fundamental building block of the solid Earth.
Mineral crystals as well as the sorts of rocks that serve as their hosts cycle through many forms as geologic materials. Temperature, weight, time, and variations in the climate in the Earth's crust and on its surface all play a role in the process. Slow cooling of magma beneath the surface of Earth is the statement that best describes the formation of rock.
Therefore, the correct option is option A.
To learn more about rock, here:
https://brainly.com/question/29767269
#SPJ2
Label each of the following changes as a physical change or chemical change. Give evidence to support your answer.
A catalytic converter changes nitrogen dioxide to nitrogen gas and oxygen gas
Answers
Answer:
A catalytic converter changes nitrogen dioxide to nitrogen gas and oxygen gas is a chemical change.
Explanation:
Hello.
In this case, since physical changes do not modify the molecular composition and structure of the material undergoing it whereas the chemical change does, for catalytic converters we should know they promote chemical reaction in which the composition is changed; for instance, for the given example, the following chemical reaction is the evidence:
[tex]2NO_2\rightarrow N_2+O_2[/tex]
As you can see, nitrogen and oxygen are no longer bonded but separated by themselves, therefore, this is a chemical change.
Best regards.
calculate the mass of N2 gas which has a volume 0.227 at STP
Answers
What metalloid has commonly been used as an insecticide due
to its effectiveness as a poison.
Answers
Answer:
Arsenic.
Explanation:
Hello there!
In this case, since insecticides are substances that act as poisons to get rid of insects in order to prevent their presence and/or reproduction in houses, companies, crops and others, a substance that has been widely used is the metalloid arsenic due to its direct affection of the insect's body (movement, performance, cellular functions).
In addition, high levels of arsenic in food could cause arsenic poisoning in humans as well, that is why such practice must be properly performed and by using the correct security protocol.
Best regards!
Answer:
As
Explanation:
hoffe das hilf jedem in der zukunft
All of the following conditions in Earth can cause metamorphic rock to form EXCEPT
O pressure
O heat
the presence of hot, plastic like material
O exposure to air
Answers
Explanation:
heat
the presence of hot, plastic like material
what’s the most abundant isotope of lawrencium
Answers
Answer:
266Lr
Thirteen isotopes of lawrencium are currently known; the most stable is 266Lr with a half-life of 11 hours, but the shorter-lived 260Lr (half-life 2.7 minutes) is most commonly used in chemistry because it can be produced on a larger scale.
Explanation:
hopefully that helps you
Define a function compute_gas_volume that returns the volume of a gas given parameters pressure, temperature, and moles. Use the gas equation PV
Answers
Answer:
def compute_volume(pressure,moles,temperature):
volume = (8.314 * moles * temperature)/pressure
print("Volume: "+str(volume))
Explanation:
This line defines the function
def compute_volume(pressure,moles,temperature):
This line calculates the volume
volume = (8.314 * moles * temperature)/pressure
This line prints the calculated volume
print("Volume: "+str(volume))
HELP ME ASAP!
Under the Law of Multiple Proportions, Carbon Dioxide has a ratio of 2.666 g
Oxygen for every 1 g Carbon. Given this, how much oxygen is present in a sample
of carbon dioxide that has 16 g of carbon?
Answers
Answer:
In carbon dioxide, on the right, there is 2.666 g of oxygen for every gram of carbon. So the ratio of oxygen in the two compounds is 1:2, a small whole number ratio
please mark me as the brainliest answer and please please pleaseeee follow me.
Which is an example of a current research focus in chemistry?
A. applying gene therapy to treat certain diseases
B. using hook-and-loop tape in the clothing industry
C. developing smoke detectors for common use
D. studying coal combustion as an energy source
Answers
Answer:
b is the correct answer
do not trust answer one
Explanation:
help me please i’ll give u a good rating
Answers
Answer:
d
Explanation:
WHOEVER ANSWERS THIS GETS A SHOUTOUT ON INSTA LIKE I DONT EVEN CARE HELP
The heater used in a 4.33 m x 3.43 m x 3.03 m dorm room uses the combustion of natural gas (primarily methane gas) to produce the heat required to increase the temperature of the air in the dorm room. Assuming that all of the energy produced in the reaction goes towards heating only the air in the dorm room, calculate the mass of methane required to increase the temperature of the air by 7.35 °C. Assume that the specific heat of air is 30.0 J/K-mol and that 1.00 mol of air occupies 22.4 L at all temperatures. Enthalpy of formation values can be found in this table. Assume gaseous water is produced in the combustion of methane.
Answers
Answer:
The answer is 7.89
Explanation:
Mass of methane required to increase the temperature of the air in the room by 7.35 °C is 7.95 g
The volume of air in the room is first calculated:
Volume of air in the room = 4.33 m x 3.43 m x 3.03 = 45.00 m³
1 m³ = 1000 L
45.00 m³ = 45.00 m³ * 1000 L/m³
Volume of air in L = 45000 L
Number of moles of air in 45000 L of air is then determined:
1.00 moles of air occupies 22.4 L
number of moles of air in 45000 L = 45000 L * 1 mole / 22.4 L
number of moles of air = 2008.93 moles of air
Energy that is needed to heat the room by 7.35 °C is then calculated:
Quantity of energy needed = Specific heat capacity * number of moles * temperature increase
Specific heat capacity of air = 30.0 J/K/mole
Quantity of energy needed = 30.0 * 2008.93 * 7.35
Quantity of energy needed = 442969.065 J = 443.00 kJ
The amount of methane required to produce that amount of energy is then calculated:
Equation of combustion of methane : CH₄ + 2 O₂ ---> CO₂ + 2 H₂O
Enthalpy of combustion of methane = −890.3 kJ/mole
Number of moles of methane required = 443.00 kJ / 890.8 kJ/mole = 0.497 moles
Mass of 1 mole of methane = 16.0 g
mass of 0.497 moles of methane = 16.0 * 0.497 = 7.95 g
Therefore, mass of methane required to increase the temperature of the air in the room by 7.35 °C is 7.95 g
Learn more at: https: brainly.com/question/4213585
The pH of a solution of 19.5 g of malonic acid in 0.250 L is 1.47.The pH of a 0.300 M Solution of sodium hydrogen malonate is 4.26. What are the values of Ka1and Ka2
Answers
Answer:
[tex]Ka_1=1.61x10^{-3}[/tex]
[tex]Ka_2=1.01x10^{-8}[/tex]
Explanation:
Hello.
In this case, since the stepwise dissociation of malonic acid which is a diprotic acid that we are going to symbolize by H₂A, is:
[tex]H_2A\rightleftharpoons H^++HA^-;Ka_1\\\\HA^-\rightleftharpoons H^++A^-;Ka_2[/tex]
The first ionization has the following equilibrium expression:
[tex]Ka_1=\frac{[H^+][HA^-]}{[H_2A]}[/tex]
Whereas the concentration of H⁺ equals the concentration of HA⁻ and is computed via the pH:
[tex][H^+]=[HA^-]=10^{-pH}=10^{-1.47}=0.0339M[/tex]
Next, we compute the molarity of the 19.5 g of malonic acid (molar mass = 104.06 g/mol) as shown below:
[tex][H_2A]=\frac{19.5g/(104.06 g/mol)}{0.250L}=0.750M[/tex]
Thus, Ka1 turns out:
[tex]Ka_1=\frac{(0.0339)(0.0339)}{0.750-0.0339}=1.61x10^{-3}[/tex]
Now, for the second ionization, since the 0.300-M sodium hydrogen malonate is the source of HA⁻, and the pH is 4.26, we can compute the concentration of both H⁺ and A⁻² again by considering the pH:
[tex][H^+]=[A^-^2]=10^{-4.26}=5.50x10^{-5}M[/tex]
Therefore Ka2 turns out:
[tex]Ka_2=\frac{[H^+][A^{-2}]}{[HA^-]}=\frac{(5.50x10^{-5})(5.50x10^{-5})}{0.300-(5.50x10^{-5})}\\ \\Ka_2=1.01x10^{-8}[/tex]
Best regards!
Balance the equations by inserting coefficients as needed.
equation 1:
PCl_{3} + Cl_{2} -> PCl_{5}
PCl3+Cl2⟶PCl5
equation 2:
Mg_{3}N_{2} + HCl -> MgCl_{2} + NH_{3}
Mg3N2+HCl⟶MgCl2+NH3
Answers
Answer:
first one is already balanced
2. MgN2+6HCl->3MgCl2+2NH3
Explanation:
To balance the equations, we need to ensure that the same number of each type of atom is present on both sides of the equation. Here's how we can balance the given equations:
Equation 1: PCl₃ + Cl₂ -> PCl₅
In this equation, there are 1 phosphorus (P) atom, 3 chlorine (Cl) atoms, and 5 chlorine (Cl) atoms. To balance the equation, we can put a coefficient of 2 in front of PCl₃ to have 2 phosphorus atoms, and a coefficient of 5 in front of Cl₂ to have 10 chlorine atoms:
2PCl₃ + 5Cl₂ -> PCl₅
Now the equation is balanced with 2 phosphorus atoms and 10 chlorine atoms on both sides.
Equation 2: Mg₃N₂ + HCl -> MgCl₂ + NH₃
In this equation, there are 3 magnesium (Mg) atoms, 2 nitrogen (N) atoms, 2 hydrogen (H) atoms, and 1 chlorine (Cl) atom.
To balance the equation, we can put a coefficient of 3 in front of HCl to have 3 hydrogen atoms, and a coefficient of 2 in front of NH3 to have 2 nitrogen atoms:
Mg₃N₂ + 3HCl -> MgCl₂ + 2NH₃
Now the equation is balanced with 3 magnesium atoms, 2 nitrogen atoms, 6 hydrogen atoms, and 2 chlorine atoms on both sides.
Know more about coefficient:
https://brainly.com/question/12318261
#SPJ2
Identify the oxidizing and reducing agent in the following reaction, and determine which element is oxidized and which is reduced. Fe2+(aq) + ClO2(aq) → Fe3+(aq) + ClO2–(aq) ClO2 is the reducing agent and Fe2+ is the oxidizing agent . Fe is oxidized and Cl is reduced. g
Answers
Answer:
Explanation:
Fe⁺²(aq) + ClO₂(aq) → Fe⁺³(aq) + ClO₂⁻(aq)
Here oxidation number of Fe is increased from +2 to +3 , so Fe is oxidised .
The oxidation number of Cl is reduced from + 4 to +3 so Cl is reduced .
So ClO₂(aq) is oxidising agent and Fe⁺²(aq) is reducing agent .
These are two metamorphic rocks.
Left: red and white rock with rounded grains and coarse texture. Right: flat, gray rock composed of thin layers.
Which statement about the rocks is accurate?
The rock on the right is foliated.
The rock on the left formed from granite.
The rock on the left is formed from cooled magma.
The rock on the right has randomly arranged grains.
Answers
Answer:
A. the rock on the right is foliated
Explanation:
because if you look at the image then you see that the rock is arranged in layers so you can see that it is a foliated rock and also I got it right on my quiz
HOPE IT HELPS!!!
Our universe is made up of at least a
Answers
Which of these would be classified as a chemical property that could be measured quantitatively?
Volume
Flammability
рн
Solubility
Answers
Answer:
рн
Explanation:
From the given choices, pH is the only chemical property that can be measured quantitatively.
A chemical property is one that tells us about what a substance can do as regards to whether or not the substance reacts with other substances.
Examples are flammability, rusting of iron, precipitation, decomposition of water e.t.c
pH is the degree of acidity or alkanility of a solution. It is usually determined quantitatively using a pH scaleThe scale is graduated from 1 to 14 1 to 7 is for acids7 is for neutral compounds7-14 is for alkalines.Given the following balanced equation:
9 Fe2O3 + 2 NH3 → 6 Fe3O4 + N2 + 3 H2O
A) how many grams of NH3 are needed to react with 125 grams of Fe2O3?
B) how many grams of Fe3O4 will be produced?
Answers
Answer:
What mass of sodium hydroxide is needed to react completely with 10.0 g of iron( III) chloride? The conversion sequence is: A. B.
Explanation:
make me as brain liest
A hydrocarbon molecule contains carbon and hydrogen atoms in equal numbers. Its molar mass is 130.18 g/mol. What is the molecular formula for the hydrocarbon
Answers
Answer:
The molecular formula of the hydrocarbon is C10H10
Explanation:
Here, we are interested in finding the molecular formula for the hydrocarbon.
Since there are equal number of moles of carbon and hydrogen, then we have the molecular formula looking like;
CnHn
Kindly recall that the atomic mass of carbon is 12 a.m.u while that of hydrogen is 1 amu
so calculating the atomic mass of the compound, we have;
12(n) + 1(n) = 130.18
13n = 130.18
n = 130.18/13
n = 10.01
So the molecular formula will be C10H10
Answer:
C10H10
Explanation:
A hydrocarbon is a binary compound of carbon and hydrogen. Hence a hydrocarbon is a compound of the general formula (CH)n
Thus;
(12 + 1) n = 130.18
n= 130.18/13
n = 10
Hence the molecular formula of the compound is C10H10
What type of energy is defined as the kinetic energy of the atoms of a substance?
Answers
Explanation:Thermal energy, or heat, is the energy that comes from the movement of atoms and molecules in a substance. Heat increases when these particles move faster. Geothermal energy is the thermal energy in the earth. Motion energy is energy stored in the movement of objects.
I hope this helped!
What does this diagram represent?
Answers
Answer:
Linear molecule with two domains
Explanation:
Explain how plucking occurs
Answers
Answer:
plucking is usually extracting hair
Explanation:
example: pluck the chicken feathers
pluck my brows
H3C - CH2 - CEC - CH3
Compound name
Answers
Answer:
2-pentene
hope this helps :)
Explanation: