Draw the structures of the compounds
1. 2,4-dimethylhexane
2. 3,3-diethyl-4-methyl-5propyloctane
Please I need help

Answer:

plutonic rocks are formed when magma cools and solidifies underground This shows us if the rock is plutonic or volcanic. When magma cools underground, it cools super slow and when lava cools above ground, it cools faster. When magma and lava cool, mineral crystals start to form in the molten rock.

Explanation:

i hope this is correct

Answer:

c. pairs of electrons are shared between two nonmetal atoms

Explanation:

Bonding between elements solely depends on their electronegativity. When there is large difference in electronegativity, those atoms form ionic bonds. Covalent bonds form when the difference is minimal, or none at all. When the difference between electronegativities is 0 or very close to 0, then they form pure covalent bonds, or nonpolar bonds. An example of this are diatomic molecules. Diatomic molecules are two of the same atom that form nonpolar covalent bonds because their electronegativy difference is 0, as they have the same electronegativity. When the electronnegativties have bit of difference, they form polar covalent bonds.

Answer: The reaction of 1 mol of C to form carbon monoxide in the reaction 2 C(s) + O2(g) ( 2 CO(g) releases 113 kJ of heat. How much heat will be released by the combustion of 100 g of C according the the above information? According to the balanced chemical equation;

Explanation:

Answer:

source Mass extinctions are episodes in which a large number of plant and animal species become extinct within a relatively short period of geologic time—from possibly a few thousand to a few million years. ... Permian Period — 252 million years ago. Devonian Period — 359 million years ago. Ordovician Period — 443 million years

BP: Nowadays, scientists are aware of five mass extinction events in the past, starting with the End-Ordovician Extinction 450 million years ago and up to the End-Cretaceous Extinction that killed off the dinosaurs 66 million years ago

In your own words- Mass extinctions area unit episodes during which an oversized variety of plant and animal species become extinct at intervals a comparatively short amount of earth science time—from probably some thousand to some million years. ... Permian period — 252 million years past. period — 359 million years past. geological period — 443 million years

BP: today, scientists area unit alert to 5 mass extinction events within the past, beginning with the End-Ordovician Extinction 450 million years past and up to the End-Cretaceous Extinction that killed off the dinosaurs sixty six million years past

Explanation:

source is where i got this information and the in your own words is it fully rewritten hope this helps and my aplogies for making this so lengthy!

Answer:

Temperature

Explanation:

This is because quantitative data include numerical values for example 10 degrees Celsius. However the others are qualitative data because the research can be described but not with numbers like your appearance is very nice.

Hope this helps :P

Answer:

Quantitative data is the type of data whose value is measured in the form of numbers or counts, with a unique numerical value associated with each data set. Also known as numerical data, quantitative data further describes numeric variables (e.g. How many? How often? How much?)

Explanation:

so its temp

Answer:

1.) Tin oxide + Carbon → Tin + Carbon monoxide.

2.) Lead oxide + Carbon → Lead + Carbon monoxide.

These equations show that the metals are being extracted by their oxides by heating with carbon. This is because the metals (Tin and Lead) are less reactive than carbon. Remember, extraction methods of metals are determined by their reactivity. Since the elements tin and lead are less reactive than carbon, the extraction process of heating with carbon is needed.  Remember that when a metal heats with carbon, the carbon displaces the metal from the compound and removes the oxygen from the oxide. Leaving you with the metal and carbon monoxide.

Answer:

The forms of energy are:

These are the six forms hope you can write short notes on them.

Answer:

sdfs

Explanation:

dfssdf

When 1-bromo-2-methylpropane is reacted with methoxide the same product 1-methylprop-2-ene is obtained. This reaction is attached in image below:

The SN2 reaction is a nucleophilic substitution reaction that breaks one bond while forming another. The rate-determining step of the reaction involves two reacting species. SN2 is an abbreviation for Substitution Nucleophilic Bimolecular.

The reaction is bimolecular because two molecules are present in the transition state, as indicated by the number 2 in the SN2 symbol. As a result, the rate of the reaction is affected by the concentrations of both the nucleophile and the substrate.

The SN2 reaction is a nucleophilic substitution with two components in the rate determining step. -SN2 reactions are bimolecular, with bond-forming and bond-breaking steps occurring simultaneously. There is no intermediate in -SN2 reactions.

Thus, product 1-methylprop-2-ene is obtained.

To learn more about the SN2 reaction, follow the link;

https://brainly.com/question/14080839

#SPJ6

Answer:

Conversion of energy

Explanation:

Shaking the sand is a form of kinetic energy. The friction of the sand particles rubbing against each other converts the kinetic energy to heat energy. Some of the kinetic energy also converts into the energy of sound waves, which you can hear while you shake the sand.

Answer:

Pressure Cooking

Explanation:

Pressure cooking is a very old cooking method that’s experienced a recent resurgence thanks to a new generation of cookers that promise a speedy, set-it-and-forget-it path to dinner. These devices, whether electrical or stovetop, are all much safer than those of decades ago (which tended to explode), with mechanisms to prevent them from accumulating too much pressure. If you read the owner’s manual carefully, however, you’ll still find one important precaution to take when cooking under pressure: adding water. Water and pressure cooking go hand in hand. In fact, it’s water that helps generate the high-pressure environment that makes your food cook faster.

Most pressure cooker instructions state a minimum amount of water required for pressure cooking even a tiny amount of food. Inside the tightly sealed pressure cooker, the water is heated and eventually boils into steam. Since the steam cannot escape, it collects above the food. All those trapped water molecules increase the pressure inside the cooker.

Answer:

1.Phenolphthalein

2.Method

a.Use the pipette and pipette filler to add 25 cm 3 of alkali to a clean conical flask.

b.Add a few drops of indicator and put the conical flask on a white tile.

c.Fill the burette with acid and note the starting volume.

d.Slowly add the acid from the burette to the alkali in the conical flask, swirling to mix.

Explanation:

The volume of the dry nitrogen gas at STP is 57.4 mL

From the question given above, the following data were obtained:

Initial volume (V₁) = 77 mL

Initial temperature (T₁) = 50 °C = 50 + 273 = 323 K

Initial pressure (P₁) = 763 – 92.5 = 670.5 mmHg

Final temperature (T₂) = STP = 273 K

Final pressure (P₂) = 760 mmHg

The volume of the dry nitrogen can be obtained by using the combine gas equation as follow:

[tex] \frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} \\ \\ \frac{670.5 \times 77}{323} = \frac{760 \times V_2}{273} \\ \\ cross \: multiply \\ \\ 323 \times 760 \times V_2 = 670.5 \times 77 \times 273 \\ \\ divide \: both \: side \: by \: 323 \times 760 \\ \\ V_2 = \: \frac{670.5 \times 77 \times 273 }{323 \times 760} \\ \\ V_2 = 57.4 \: ml[/tex]

Therefore, the volume of the dry nitrogen gas is 57.4 mL

Learn more: https://brainly.com/question/25080013

Answer: Atom

..............................................

Answer:

Transpiration is the correct answer mark me brainliest

Answer:

and id say maybe

Explanation:

Light waves travel much faster than sound waves.

Answer:

An ion is a charged atom or molecule. It is charged because the number of electrons do not equal the number of protons in the atom or molecule. An atom can acquire a positive charge or a negative charge depending on whether the number of electrons in an atom is greater or less then the number of protons in the atom.

Answer:an amino acid

Explanation:

For me this was the correct answer on a castle learning

Answer:

p=F/A.Explanation:

C

R. F. M (Relative Formula Mass) of C=12

12g of C=1 mole

1.39g of C=(1*1.39)/12

=0.1158 moles

The pressure of this gas in atm is equal to 1.63 atm.

Given the following data:

To calculate the pressure of this gas, we would use the ideal gas law equation;

[tex]P=\frac{nRT}{V}[/tex]

Where;

Substituting the given parameters into the formula, we have;

[tex]P=\frac{0.742 \times 0.0821 \times 291}{10.91} \\\\P = \frac{17.73}{10.91}[/tex]

Pressure, P = 1.63 atm.

Read more: https://brainly.com/question/25706436

Answer:

Hailstones are formed when raindrops are carried upward by thunderstorm updrafts into extremely cold areas of the atmosphere and freeze.

so i'm gonna guess and say that it does not matter because the rain drops freeze in the atmosphere in a cold place.

Explanation:

Hailstones are formed when raindrops are carried upward by thunderstorm updrafts into extremely cold areas of the atmosphere and freeze.

An atmosphere is defined as a blanket of gases that surrounds Earth which held near the surface of the planet by Earth’s gravitational force of attraction.

Argon, oxygen and nitrogen from the three main constituents of the atmosphere, it Helps to retain the sun’s heat and prevents it from escaping back into space, Protects life from harmful radiation, Plays a major role in Earth’s water cycle.

The atmosphere has five distinct layers which are determined by the changes in temperature and it happen with increasing altitude. Layers of Earth’s atmosphere are divided into five different layers as  Exosphere

Thermosphere, Mesosphere, Stratosphere, Troposphere

For more details regarding atmosphere , visit

https://brainly.com/question/24747263

#SPJ2

Answer:

Al2 (SO4)3

2×27 + 3×(32+ 4×16)

54 + 3×(32+ 64)

54+ 3×(96)

54+ 288

=342g

BRAINLIST PLS

Answer:

the charge or oxidation number on the cation and anion.

Explanation:

The factor that governs the formula of an ionic compound such as Ca3N2 is the charge or oxidation number on the cation and anion.

In the example, Ca has a +2 charge, N has a -3 charge

So we need 3 x ( +2) to balance 2 x (-3) and have an electrically neutral compound, so

+6 -6 =0

The factor that governs the formula of an ionic compound such as Ca₃N₂ is charge.

Those compounds in which ionic bond is present between the cation and anion is known as ionic compound.

The most important factor that is essential for the formation of ionic compounds are charge i.e. positive charge and negative charge. In the given compound Ca₃N₂, Calcium (Ca) is present in the +2 oxidation state and Nitrogen is present in the -3 oxidation state. So due to attraction between these charges they make a ionic compound.

Hence charge is important factor.

To know more about ionic compounds, visit the below link:

https://brainly.com/question/11638999

Answer:

5.57 x 10^24 atoms

Explanation:

first, you are seeking the number of ATOMS of Boron.

Boron has an Atomic mass of 10.8 g/mol (see #5 on the periodic table)

100 gm of Boron would have 100 g /10.8 g/mol =9.26 moles

each mole has Avogadros number of atoms 6.02 x 10^23

9.26 moles has 9.26 x 6.02 x 10^23 atoms =5.57 x 10^24 atoms

mix the food with digestive juices that have acids and enzymes, breaking it into much smaller, digestible pieces

Answer:

yes/no

Explanation:

I prefere it refrigerated because it lasts longer in my opinion. but some people keep it out

Answer:

yes.

Explanation:

It does unless you want warm soggy pie.

Answer:

because they are saturated