enough of a monoprotic weak acid is dissolved in water to produce a 0.0143 m solution. the ph of the resulting solution is 2.66 . calculate the ka for the acid.

The isoline indicated on this weather map is an isobar.

The high-pressure area is located in a region of relatively high pressure.

In a high-pressure area, the weather is typically fair and dry, with clear skies and little or no precipitation.

High-pressure systems are associated with sinking air, which tends to suppress cloud formation and precipitation. The sinking air also leads to increased atmospheric stability, which further inhibits cloud formation and precipitation. An isobar is a line connecting points of equal atmospheric pressure on a weather map.

In a high-pressure area, the atmospheric pressure is relatively high compared to the surrounding areas, and the isobars are closely spaced together. This indicates a steep pressure gradient and strong pressure gradient force. The clockwise rotation of air around a high-pressure area in the Northern Hemisphere also leads to the formation of clear skies and dry weather conditions. The sinking air associated with the high-pressure system suppresses cloud formation and precipitation, resulting in sunny and dry weather conditions.

To know more about the Weather map, here

https://brainly.com/question/30260238

#SPJ1

Answer:

1. Isobar

2. 1024 mb

3. sunny weather

Explanation:

I did it on edge

we need to use the balanced chemical equation for the decomposition of SbCl5: Therefore, you need to add 0.05955 moles of chlorine gas to the 15.00L container to make the new equilibrium concentration of SbCl3 (g) half that of the original equilibrium concentration.

SbCl5 (g) ⇌ SbCl3 (g) + Cl2 (g)
equilibrium concentrations given are:
[SbCl5] = 0.0293 M
[SbCl3] = [Cl2] = 0.00794 M
We want to find the number of moles of Cl2 that must be added to the container to make the new equilibrium concentration of SbCl3 to be half that of the original equilibrium concentration.
Let's call the new equilibrium concentration of SbCl3 "x" M. Since the volume of the container is constant at 15.00 L, we can use the equilibrium expression to set up an equation and solve for x:
Kc = [SbCl3][Cl2]/[SbCl5]
Kc = (0.00794)(0.00794)/(0.0293) = 0.001706 M
0.001706 = x(0.00794-x)/(0.0293+x)
Simplifying this equation and solving for x, we get:
x = 0.002296 M
This is half of the original equilibrium concentration of SbCl3, which was 0.00794 M. So, we need to add enough Cl2 to increase the concentration from 0.00794 M to 0.002296 M.
The change in concentration of Cl2 is:
Δ[Cl2] = x - [Cl2] = 0.002296 - 0.00794 = -0.005644 M
This means we need to remove 0.005644 M of Cl2 from the container. Since the volume of the container is 15.00 L, we can use the equation:
moles = concentration × volume
to calculate the number of moles of Cl2 that must be removed:
moles of Cl2 = (0.005644 M) × (15.00 L) = 0.08466 moles
Therefore, we need to remove 0.08466 moles of Cl2 from the container to reach the new equilibrium concentration of SbCl3.

To determine the number of moles of chlorine gas that must be added to the 15.00L container to make the new equilibrium concentration of SbCl3 (g) half that of the original equilibrium concentration, follow these steps:
1. Write the balanced equation for the reaction:
SbCl5 (g) ⇌ SbCl3 (g) + Cl2 (g)
2. Given the original equilibrium concentrations:
[SbCl5] = 0.0293 M
[SbCl3] = [Cl2] = 0.00794 M
3. The new equilibrium concentration of SbCl3 (g) should be half the original:
[SbCl3_new] = 0.5 * 0.00794 M = 0.00397 M
4. Since the stoichiometry of SbCl3 and Cl2 in the balanced equation is 1:1, the change in the concentration of Cl2 must be equal to the change in the concentration of SbCl3:
Δ[Cl2] = 0.00397 M
5. Calculate the number of moles of Cl2 to be added to the container:
moles of Cl2 = Δ[Cl2] * volume of container
moles of Cl2 = 0.00397 M * 15.00 L = 0.05955 moles
Therefore, you need to add 0.05955 moles of chlorine gas to the 15.00L container to make the new equilibrium concentration of SbCl3 (g) half that of the original equilibrium concentration.

Visit here to know more about decomposition:

brainly.com/question/8009068

#SPJ11

The pair that cannot be mixed together to form a buffer solution is option A) NaCl, HCl. A buffer solution consists of a weak acid and its conjugate base or a weak base and its conjugate acid, which help maintain a constant pH.

A buffer solution is a solution that contains a weak acid and its conjugate base or a weak base and its conjugate acid. Buffers help to maintain a relatively constant pH when small amounts of acids or bases are added to the solution. In the pair NaCl and HCl, both compounds are strong electrolytes and do not contain a weak acid or a weak base. NaCl is a strong electrolyte because it dissociates completely into Na+ and Cl- ions in solution. Similarly, HCl is a strong acid that dissociates completely into H+ and Cl- ions. Since neither NaCl nor HCl contains a weak acid or a weak base, they cannot form a buffer solution. In order to form a buffer solution, it is necessary to have a weak acid and its conjugate base or a weak base and its conjugate acid. Other examples of compounds that cannot form a buffer solution include strong acids such as HNO3 and H2SO4, and strong bases such as NaOH and KOH. These compounds are also strong electrolytes and do not contain a weak acid or a weak base. In summary, a buffer solution requires a weak acid or a weak base and its conjugate base or acid, and strong electrolytes such as NaCl and HCl cannot form a buffer solution.

To know more about buffer please refer: https://brainly.com/question/22821585

#SPJ11

According to decreasing polarity, the order of the molecules in each set is as follows: PF₃ > PCl > PBr, BF > CF > NF, Te > Se > BrF₃, and so on. The bond's ionic nature (polarity) increases as the electronegativity difference between the atoms increases.

The degree of electronegativity gap between the atoms affects how polar covalent bonds are. The bonds' polarity increases as the difference in electronegativity between the atoms increases. Since fluorine is more electronegative than hydrogen, its p character would be higher in the N-F bond than in the N-H bond. More character also results in wide bond angles. As a result, the bond angle in NH₃ is higher than in NF₃.

To know more about polarity, click here:

https://brainly.com/question/30002497

#SPJ4

Rank the members of each set of compounds according to the ionic character of their bonds. Most ionic bonds?a) PCl3 PBr3 PF3 Most ionic bonds? b) BF3 NF3 CF3 Most ionic bonds? c) SeF4 TeF4 BrF3 Least ionic bonds? d) PCl3 PBr3 PF3 Least ionic bonds?e) BF3 NF3 CF3 Least ionic bonds? f) SeF4 TeF4 BrF3

The pH when 1.00 mL of 1.00 M HCl is added to:

a) Pure water is approximately 3.00, and

b) A buffer with [HOAc] = 0.700 M and [OAc-] = 0.600 M (pH 4.68) is approximately 4.65.


a) When 1.00 mL of 1.00 M HCl is added to 1.00 L of pure water, the HCl dissociates completely, providing 0.001 moles of H+. Since the total volume is 1.001 L, the H+ concentration becomes (0.001 moles / 1.001 L) ≈ 0.001 M. The pH is calculated as -log(0.001) ≈ 3.00.

b) For the buffer, use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). The pKa is -log(K) = -log(1.8x10⁻⁴) ≈ 3.74.

Adding 0.001 moles of HCl to the buffer will react with the OAc- ions, reducing [OAc-] by 0.001 moles and increasing [HOAc] by 0.001 moles. The new concentrations are [HOAc] = 0.701 M and [OAc-] = 0.599 M. The new pH is 3.74 + log(0.599/0.701) ≈ 4.65.

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

In the electrophilic aromatic substitution through iodination, the role of NaI is to generate the electrophile I+ and the role of NaOCl is to oxidize the vanillin to form the electrophilic species. The role of sodium thiosulfate in the work-up is to remove any remaining iodine in the reaction mixture.

The electrophilic aromatic substitution through iodination involves the use of sodium iodide (NaI) and sodium hypochlorite (NaOCl) as the reactants.

NaI serves as a source of iodine and generates the electrophile I+ which is an important component of the reaction. NaOCl oxidizes vanillin to form the electrophilic species. The reaction takes place in the presence of an acid catalyst and an organic solvent such as ethanol.

After the reaction, sodium thiosulfate is used in the work-up of the reaction. Sodium thiosulfate acts as a reducing agent and reacts with any remaining iodine in the reaction mixture to form harmless sodium iodide and sodium tetrathionate.

This helps to remove any unreacted iodine and prevents it from interfering with subsequent reactions or causing harm to the environment.

Overall, the role of each reactant in the transformation is to contribute to the formation of the electrophilic species and aid in the electrophilic aromatic substitution.

For more questions like Reaction click the link below:

https://brainly.com/question/30086875

#SPJ11

Butanoic acid (CH3CH2COOH)

Isobutanol (CH3CH(CH3)CH2OH)

These two compounds can react in the presence of catalytic acid to form methyl 3,3-dimethylbutanoate

In a Fischer esterification process, an alcohol and a carboxylic acid react to form an ester in the presence of a catalytic acid, typically sulfuric acid.

In this case, we want to form the ester methyl 3,3-dimethylbutanoate, which has the molecular formula CH3CH2CO2C(CH3)3.

To form this ester, we need to start with a carboxylic acid and an alcohol that can react to form the ester. One possible combination of reactants that would give us the desired product is:

Butanoic acid (CH3CH2COOH)

Isobutanol (CH3CH(CH3)CH2OH)

These two compounds can react in the presence of catalytic acid to form methyl 3,3-dimethylbutanoate:

CH3CH2COOH + CH3CH(CH3)CH2OH → CH3CH2CO2C(CH3)3 + H2O

Note that the acid catalyst (e.g. sulfuric acid) is not consumed in the reaction and serves only to facilitate the reaction.

To know more about Fischer esterification process here:

https://brainly.com/question/31041190#

#SPJ11

Option A. When a can of soda is moved from room temperature into a fridge, the solubility of carbon dioxide inside the beverage will increase.

When a can of soda is moved from room temperature into a fridge, the solubility of carbon dioxide inside the beverage will increase. This is because cooler temperatures generally increase the solubility of gases in liquids, allowing more carbon dioxide to dissolve into the beverage.

When you put your Soda can or bottle of Soda into the fridge, it will go flat faster than if you had left it out on the counter. This is because cold temperatures cause carbonation to escape more quickly from a beverage. This can happen when there are small holes in the bottom of an aluminum container.

Know more about  solubility - brainly.com/question/9098308

#SPJ11

The moles of benzoic acid (C6H5COOH) actually produced in the experiment is 0.1498 mol.

To determine the moles of benzoic acid produced, we need to first find the molar mass of benzoic acid.

Molar mass of C = 12 g/mol
Molar mass of H = 1 g/mol
Molar mass of O = 16 g/mol

From the chemical formula of benzoic acid, we can see that it contains 7 carbon atoms, 6 hydrogen atoms, and 2 oxygen atoms. Molar mass is the sum of the molar masses of its constituent atoms. Therefore, its molar mass is:

(7 * 12 g/mol) + (6 * 1 g/mol) + (2 * 16 g/mol) = 84 + 6 + 32 = 122 g/mol

Given that the product mass is 18.28 g, we can now calculate the moles of benzoic acid produced:

Moles of benzoic acid = Product mass / Molar mass = 18.28 g / 122 g/mol = 0.1498 mol

So, 0.1498 moles of benzoic acid were actually produced in the experiment.

Learn more about Molar mass: https://brainly.com/question/837939

#SPJ11

The pH of the solution formed by adding 30 mL of 0.10 M NaOH to 50 mL of 0.10 M CH₃COOH is 9.61.

First, we need to determine the number of moles of CH₃COOH and NaOH in the solution.

moles of CH₃COOH = 0.050 L × 0.10 mol/L = 0.005 mol

moles of NaOH = 0.030 L × 0.10 mol/L = 0.003 mol

Next, we need to determine which species is the limiting reagent. Since NaOH reacts with CH₃COOH in a 1:1 ratio, and there are fewer moles of NaOH than CH₃COOH, NaOH is the limiting reagent.

The reaction between NaOH and CH₃COOH produces NaCH₃COO and H₂O. The NaCH₃COO is a salt that is completely dissociated in water, so we can ignore it for pH calculations.

The reaction also produces H₃O⁺ ions, which will determine the pH of the solution.

Since NaOH is a strong base, it completely dissociates in water to produce OH⁻ ions. We can use the equation for the reaction between NaOH and H₂O to determine the concentration of OH⁻ ions in the solution:

NaOH + H₂O → Na⁺ + OH⁻ + H₂O

[OH⁻] = [NaOH] = 0.003 mol / (0.050 L + 0.030 L) = 0.03 M

Now we need to determine the concentration of CH₃COOH that remains unreacted. Since CH₃COOH is a weak acid, it only partially dissociates in water. We can use the expression for the equilibrium constant for the dissociation of acetic acid to determine the concentration of H₃O⁺ ions in the solution:

K_a = [CH₃COO⁻][H₃O⁺] / [CH₃COOH]

Assuming that the concentration of CH₃COOH that remains unreacted is x:

K_a = (0.005 - x)(x) / (0.005 + x)

Solving for x using the quadratic formula gives:

x = 0.00182 mol

Therefore, the concentration of H₃O⁺ ions in the solution is:

[H₃O⁺] = K_a / [CH₃COOH] = (1.8 × 10⁻⁵) .

learn more about equilibrium here:

https://brainly.com/question/30807709

#SPJ11

Four physical quantities that are conserved during a process include energy, momentum, angular momentum, and electric charge. On the other hand, two quantities that are not conserved during a process are mechanical energy and mass.

Energy conservation states that the total energy of an isolated system remains constant, as energy can neither be created nor destroyed, only converted from one form to another. Momentum conservation asserts that the total momentum of a system remains constant, provided no external forces act on it. Similarly, the conservation of angular momentum dictates that the total angular momentum of an isolated system remains constant if no external torques are applied. Lastly, electric charge conservation states that the net electric charge within an isolated system remains constant, as charges can neither be created nor destroyed, only redistributed or transferred.

Mechanical energy, which comprises kinetic and potential energy, may not be conserved in non-conservative systems, such as those experiencing dissipative forces like friction or air resistance. In these cases, some mechanical energy is lost as thermal energy or other forms of energy. Mass conservation is not always maintained at the subatomic level, particularly during processes like nuclear reactions, where mass can be converted into energy following Einstein's mass-energy equivalence principle, E=mc².

Learn more about mechanical energy at:

https://brainly.com/question/28928306

#SPJ11

The pH of the buffer is approximately 5.145.

To determine the pH of the buffer containing 0.17 mol of propionic acid ([tex]C_2H_5COOH[/tex]) and 0.22 mol of sodium propionate ([tex]C_2H_5COONa[/tex]) in 1.20 L, we can follow these steps:

Step 1: Calculate the concentrations of propionic acid and sodium propionate.
[Propionic acid] = (0.17 mol) / (1.20 L) = 0.1417 M
[Sodium propionate] = (0.22 mol) / (1.20 L) = 0.1833 M

Step 2: Determine the acid dissociation constant (Ka) for propionic acid.
The Ka for propionic acid is 1.3 x [tex]10^{-5[/tex].

Step 3: Use the Henderson-Hasselbalch equation to calculate the pH.
pH = pKa + log ([A-]/[HA])
Here, [A-] is the concentration of the conjugate base (sodium propionate) and [HA] is the concentration of the acid (propionic acid).

pH = -log(Ka) + log([0.1833]/[0.1417])

Step 4: Calculate the pH.
pH ≈ -log(1.3 x [tex]10^{-5[/tex]) + log(0.1833/0.1417)
pH ≈ 4.886 + 0.259
pH ≈ 5.145

To know more about "pH" refer here:

https://brainly.com/question/30761746#

#SPJ11

The false statement is: Vitamin K is covalently attached to proteins, but rather serves as a cofactor for the enzymes involved in blood coagulation.

1. Vitamin K1
2. Vitamin K is covalently attached to proteins.
3. Vitamin K is a water-insoluble molecule.
4. Vitamin K is important for blood coagulation.
5. Vitamin K is structurally related to warfarin.

Hence, The false statement is Vitamin K is covalently attached to proteins.

To know more about Vitamin K, visit:

https://brainly.com/question/12998225

#SPJ11

The mass of PbI2 produced is 105 g (to three significant digits).

The mole ratio of KI to PbI2 in the balanced chemical equation is 2:1.

The molar mass of PbI2 is 461.01 g/mol.

To solve this problem, we need to use stoichiometry to convert the given number of moles of KI to the mass of PbI2 produced.

From the balanced chemical equation, we can see that 2 moles of KI react with 1 mole of Pb(NO3)2 to produce 1 mole of PbI2. Therefore, the mole ratio of KI to PbI2 is 2:1.

We can use this ratio to calculate the number of moles of PbI2 produced:

0.455 moles KI x (1 mole PbI2 / 2 moles KI) = 0.228 moles PbI2

Next, we can use the molar mass of PbI2 to convert moles to grams:

0.228 moles PbI2 x 461.01 g/mol = 105.19 g PbI2

Learn more about mole ratio here:

https://brainly.com/question/15288923

#SPJ1

The mass of PbI2 produced is 105 g (to three significant digits).

The mole ratio of KI to PbI2 in the balanced chemical equation is 2:1.

The molar mass of PbI2 is 461.01 g/mol.

To solve this problem, we need to use stoichiometry to convert the given number of moles of KI to the mass of PbI2 produced.

From the balanced chemical equation, we can see that 2 moles of KI react with 1 mole of Pb(NO3)2 to produce 1 mole of PbI2. Therefore, the mole ratio of KI to PbI2 is 2:1.

We can use this ratio to calculate the number of moles of PbI2 produced:

0.455 moles KI x (1 mole PbI2 / 2 moles KI) = 0.228 moles PbI2

Next, we can use the molar mass of PbI2 to convert moles to grams:

0.228 moles PbI2 x 461.01 g/mol = 105.19 g PbI2

Learn more about mole ratio here:

https://brainly.com/question/15288923

#SPJ1

The oil from the seeds can be obtained by crushing, grinding, or rolling and then doing mechanical pressing to liberate oil from the seeds.

Most of the plants have seeds and they are a source of vegetable oils that can be used for cooking, medicinal purposes, and other self-care purposes. Oil can be extracted from the seeds by following a vigorous mechanical procedure.

The seeds are crushed to separate the oil, then mixed with a solvent like water or hexane. Then the oil floats on the liquid and is separated from the mixture. The cold-pressed oils are so pure.

Some of the important vegetable seed oils are coconut oil, almond oil, hazel-nut oil, hemp seed oil etc. All these oils are used on a daily basis for various requirements.

To know more about Vegetable oils, click on:https://brainly.com/question/16788604

For an electron with orbital angular momentum quantum number (l) equal to 5, the possible distinct angles from the vertical axis that the orbital angular momentum vector can make are determined by the magnetic quantum number (m_l).

The orbital angular momentum vector of an electron is given by the equation L = (nh/2π)√(l(l+1)), where n is the principal quantum number, h is Planck's constant, and l is the angular momentum quantum number.

For an electron with n = 5, the maximum value of l is 4 (since l must be less than n). Therefore, the possible values of l for this electron are 0, 1, 2, 3, and 4.

The number of distinct angles that the orbital angular momentum vector can make from the vertical axis is equal to the number of values of l. Therefore, for an electron with n = 5, there are 5 distinct angles that the orbital angular momentum vector can make from the vertical axis.

Learn more about electron here: brainly.com/question/28977387

#SPJ11

Hypothesis:I hypothesize that by increasing the size of the star, the gravitational pull on the planets in Solar System X will increase, resulting in a more stable system.

Gravitational force is a fundamental interaction of nature that attracts two objects with mass. It is the force that binds us to the planet, keeps the planets in orbit around the sun, and causes objects to fall to the ground when dropped. The force of gravity is inversely proportional to the square of the distance between the two objects; thus, objects that are closer together experience a greater gravitational force than those that are further apart.

Results:

When I increased the size of the star, the planets in Solar System X were indeed pulled in closer to the star and the system became more stable. I observed that the planets were orbiting closer to the star and had a smaller semi-major axis, which indicates that the gravitational pull was stronger. Additionally, the eccentricity of the orbits decreased, showing that the orbits were more circular. This demonstrates that increasing the size of the star increases the gravitational pull in Solar System X, resulting in a more stable system.

To learn more about gravitational

https://brainly.com/question/28623512

#SPJ1

1. Newman projections are used to visualize and analyze the spatial arrangement of atoms and their conformations in a molecule, specifically to represent the different rotational conformations of a single bond.

2. There are two main conformations of cyclohexane: the chair conformation and the boat conformation. However, there are additional conformations, such as twist-boat and half-chair, resulting in a total of four possible conformations.

3. The normal bond angle for a tetrahedral is approximately 109.5 degrees.

4. I do not have a modeling kit. Yes, I am going to purchase one after today to better understand the structures and conformations of molecules in the studies.

https://brainly.com/question/31485794

#SPJ11

In the early phases of protein folding, sheets are less likely to form than helices because sheets need the alignment of several polypeptide chains.

The polypeptide chain starts to fold into its natural conformation during the first stages of protein folding. Because it includes hydrogen bonding between neighbouring residues along a single polypeptide chain, the creation of helices is advantageous. In contrast, the formation of the distinctive hydrogen-bonded sheet structure in sheets necessitates the alignment of many polypeptide chains in a certain orientation. Because it requires numerous chains to join together in a certain orientation, whereas helices can form from a single chain, this alignment is less likely to happen by accident. Therefore, during the initial phases of protein folding, sheets are less likely to form.

learn more about  helices here:

https://brainly.com/question/13032246

#SPJ11

The balanced equation for the neutralization reaction between hydrochloric acid (HCl) and potassium hydroxide (KOH) is:

A neutralization reaction is a chemical reaction between an acid and a base that results in the formation of a salt and water.

In this type of reaction, the H+ ions from the acid react with the OH- ions from the base to form water, while the remaining ions from the acid and base combine to form a salt.

The general equation for a neutralization reaction is:

acid + base → salt + water

The reaction between HCl and KOH produces potassium chloride (KCl) and water (H2O).

Learn more about titration at

https://brainly.com/question/13307013

#SPJ1

The Lewis dot structure of FClO3 where there is an F-Cl bond is:

           F

           |

       Cl--O--O

           |

           O

Chlorine has a formal charge of C) +3 in FClO3.

The Lewis dot structure shows the arrangement of atoms and valence electrons in a molecule.

To draw the Lewis dot structure of FClO3, we need to first determine the total number of valence electrons in the molecule. Fluorine (F) has 7 valence electrons, chlorine (Cl) has 7, and oxygen (O) has 6. We also need to add 1 for the negative charge on the ion, giving a total of 32 valence electrons.

Next, we arrange the atoms in the molecule, with the central atom being the least electronegative. In this case, chlorine is the central atom, and it is bonded to one fluorine atom and three oxygen atoms. The F-Cl bond is a single bond, represented by a line between the F and Cl atoms.

We then place the remaining valence electrons around each atom, in pairs, until each atom has a full octet of electrons (except for hydrogen, which has only two electrons). The remaining valence electrons are placed on the central atom.

After drawing the Lewis dot structure, we can calculate the formal charge on each atom to ensure that it is as close to zero as possible.

The formal charge of an atom is the difference between the number of valence electrons on the free atom and the number of electrons assigned to the atom in the Lewis structure. In this case, chlorine has 6 valence electrons (7 minus 1 because of the bond with fluorine), and 3 lone pairs (6 electrons) for a total of 9 electrons.

Thus, its formal charge is +7 - 9 = -2. However, oxygen atoms have a higher electronegativity than chlorine, so we redistribute the electrons from the oxygen atoms to chlorine. Chlorine now has 5 lone pairs (10 electrons) and a formal charge of +3 (7 - 10). All the other atoms have a formal charge of zero.Chlorine has a formal charge of C) +3 in FClO3.

For more questions like Electron click the link below:

https://brainly.com/question/1255220

#SPJ11

To calculate the pOH and pH of a 1.25 M LiOH solution at 25°C, we need to use the following equations:

pOH = -log[OH-]

pH + pOH = 14

First, we need to find the concentration of hydroxide ions [OH-] in the solution.

LiOH is a strong base, meaning it completely dissociates in water to form Li+ and OH- ions:

LiOH → Li+ + OH-

So, the concentration of [OH-] in a 1.25 M LiOH solution is also 1.25 M.

Using the pOH equation, we can calculate:

pOH = -log (1.25)

        = 0.9031

Next, we can use the pH equation to find pH:

pH + pOH = 14
pH + 0.9031 = 14

pH = 13.0969

Therefore, the pOH of a 1.25 M LiOH solution at 25°C is 0.9031, and the pH is 13.0969.

https://brainly.com/question/31485772

#SPJ11

The solution is acidic and contains 2.6 x 10-11 M of OH-. The right option is A), acidic, 2.6 x 10-11 M.

To calculate the concentration of OH- in a solution that contains 3.9 x 10^-4 M H3O+ at 25°C, we will use the ion product constant of water (Kw) equation:

Kw = [H3O+] [OH-]

At 25°C, Kw = 1.0 x 10^-14.

We are given [H3O+] = 3.9 x 10^-4 M. We will now solve for [OH-]

1.0 x 10^-14 = (3.9 x 10^-4) [OH-]

To find [OH-], divide both sides by 3.9 x 10^-4

[OH-] = (1.0 x 10^-14) / (3.9 x 10^-4) = 2.564 x 10^-11 M

Now, we will identify the solution as acidic, basic, or neutral

Since [H3O+] > [OH-], the solution is acidic.

Thus, the concentration of OH- is 2.6 x 10^-11 M, and the solution is acidic. The correct answer is A) 2.6 x 10^-11 M, acidic.

Learn more about acidic solutions: https://brainly.com/question/24255408

#SPJ11

The root mean square speed of an oxygen gas molecule (O2) at 35.0 °C is approximately 490.1 m/s.

To calculate the root mean square speed of an oxygen gas molecule (O2) at 35.0 °C, follow these steps:
1. Convert the temperature from Celsius to Kelvin: K = °C + 273.15
  35.0 °C + 273.15 = 308.15 K
2. Use the root mean square speed formula: vrms = √(3RT/M), where vrms is the root mean square speed, R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin, and M is the molar mass of the gas in kg/mol.
3. Convert the molar mass of O2 to kg/mol:
  Molar mass of O2 = 32 g/mol (16 g/mol for each oxygen atom)
  1 g = 0.001 kg, so 32 g/mol = 0.032 kg/mol

4. Plug the values into the formula: vrms = √(3 x 8.314 J/(mol·K) x 308.15 K / 0.032 kg/mol)
5. Calculate the root mean square speed:
  vrms ≈ √(240,183.665625 J/mol) = 490.0853  ≈ 490.1 m/s

Therefore, the root mean square speed of an oxygen gas molecule (O2) at 35.0 °C is approximately 490.1 m/s.

Learn more about  root mean square speed : https://brainly.com/question/30759623

#SPJ11

Answer:

Pressure= 1.52atm

Explanation:

Using; PV = nRT

P (Pressure) = ?

V (Volume) = 10litres = 10dm³

n (Number of moles) = 0.6 mol

R (Universal Gas Constant) = 0.082

T (Absolute Temperature) = 35 + 273 = 308K.

P × 10 = 0.6 × 0.082 × 308

P = 15.1546 ÷ 10

P = 1.52atm

The reaction yields propene and sodium bromide as the final products. The mineral oil is used to maintain a constant temperature and to prevent the reaction mixture from boiling.

What is the mechanism of the double elimination reaction?

The mechanism of the 1,2-dibromopropane double elimination process with two equivalents of sodium amide.

The reaction mechanism begins with the deprotonation of one of the beta-carbons of 1,2-dibromopropane by sodium amide. This forms a carbanion intermediate that is stabilized by the electron-withdrawing effect of the two bromine atoms.

Next, a second equivalent of sodium amide deprotonates the other beta-carbon, forming another carbanion intermediate. The two carbanions then undergo an E2 elimination reaction, in which the bromine atoms are eliminated as bromide ions and a carbon-carbon double bond is formed.

To learn more about E2 elimination reaction, visit: https://brainly.com/question/28239179

#SPJ1

PF3 is the molecule that has dipole-dipole interactions in the liquid phase

Dipole-dipole "interactions" occur between polar molecules with dipoles, where the positive pole of one molecule is attracted to the negative pole of another molecule. In a "liquid" phase, molecules have enough energy to overcome some of their intermolecular forces, but not all.

1. PF3:

This molecule is polar because the fluorine atoms are more electronegative than the phosphorus atom, creating a net dipole moment.
2. XeF2:

This molecule is nonpolar due to its linear geometry, which causes the dipole moments of the two fluorine atoms to cancel each other out.
3. GeF:

This is an incomplete molecular formula, so it cannot be evaluated.
4. OPClS:

This is also an incomplete molecular formula, so it cannot be evaluated.
5. OBF:

This is another incomplete molecular formula, so it cannot be evaluated.

For more information on dipole dipole interactions  in Liquid phase refer https://brainly.com/question/11828970

#SPJ11

If the actual temperature of the solution is lower than that of the water bath, the value of the activation energy would likely be higher.

This is because the activation energy is the minimum amount of energy required for a reaction to occur. If the temperature is lower, there is less energy available for the reactants to reach this minimum energy threshold. Therefore, the reaction would proceed at a slower rate and require more energy to reach completion. In contrast, if the actual temperature of the solution was higher than that of the water bath, the value of the activation energy would decrease, as there would be more energy available to the reactants.

Learn more about temperature here:

https://brainly.com/question/13134636

#SPJ11

The energy change (δe) for the decomposition of hydrogen peroxide: 2 H₂O(g) → 2 H₂O(g) ⁺ O₂(g) is 794 kJ/mol.

To calculate the energy change (δe) for the decomposition of hydrogen peroxide, we first need to calculate the energy required to break the bonds in the reactants and the energy released when the bonds in the products form.

Here are the bond energies of the reactants and products:

To break the bonds in the reactants, we need to break four H-O bonds and one O-O bond, so the total energy required to break the bonds in the reactants is:

4(H-O) + 1(O-O)

= 4(463 kJ/mol) + 498 kJ/mol

= 2218 kJ/mol

To form the bonds in the products, we need to form two H-O bonds and one O=O bond, so the total energy released when the bonds in the products form is:

2(H-O) + 1(O=O)

= 2(463 kJ/mol) + 498 kJ/mol

= 1424 kJ/mol

Therefore, the energy change (δe) for the decomposition of hydrogen peroxide is:

δe = energy required to break bonds in reactants - energy released when bonds in products form

δe = 2218 kJ/mol - 1424 kJ/mol

δe = 794 kJ/mol

So the energy change for the decomposition of hydrogen peroxide is 794 kJ/mol.

Learn more about decomposition of hydrogen peroxide: https://brainly.com/question/18221920

#SPJ11