Explain why Iceland is a good place to use hydrothermal power, power produced from heated water

When two items are slipping by one another, it is abrasive. Sliding friction is the force that prevents motion as a simple result of the two surfaces rubbing against one another.

What is the force of sliding friction?

The force for friction force is inversely related to the weight while travelling in a plane parallel to the surface. In particular, the force would be equal to the weight of the object if the body was sliding across a horizontal surface. The sliding force first few of a normal force divided by the amount of sliding friction.

Does the amount of in contact surface have an impact on the sliding friction?

It depends on the pull of gravity and substance, both of which are important. Changes in the sliding friction are unaffected by

To know more about friction visit:

https://brainly.com/question/13000653

#SPJ4

One child has blonde hair like their mother, and their sibling has brown hair like their father; this is due to genetics. A baby's gender and the reasons why some diseases run in families are also influenced by DNA.

Many of your characteristics, like your skin and hair colors, are determined by genes that are passed down to you. Perhaps Emma's mother carries both the brown and red hair genes, and she gave Emma the red hair gene.

An alteration to just one copy of the gene results in the autosomal dominant inheritance pattern. Mutations in both copies of the gene pair create the autosomal recessive inheritance pattern.

To know more about genetic factors visit:-
https://brainly.com/question/29517743

#SPJ4

Find the ski race's end speed in m/s and the time it took to show that, shockingly, obtaining a running start offers very little advantage.

Find the ultimate speed and the time required for a skier to travel 60.0 metres over a 25-degree slope to illustrate this. Two times 70 divided by 2.5 metres per second for the initial speed plus 26.3106 metres per second for the end speed is the formula we used to solve for t. The entire amount of time required to descend the slope is 4.86 seconds. advantage Skis slide because the tiny layer of snow beneath them melts as a result of friction converting your kinetic energy (skiing) into thermal energy (heat). In downhill skiing, for instance, when the athlete is propelled down

To learn more about advantage  please click on below link

https://brainly.com/question/13221821

#SPJ4

interesting to note that more effort is needed to start an object moving than to keep it moving since the static coefficients of sliding friction is higher than the kinetic coefficient.

You've probably noticed that moving heavier objects requires more force or a push. The inertia of heavier items is greater. Greater inertia makes it more difficult for an object to start moving, stay in the same place, or change directions.

The sliding object travels to a bottom of track quicker because it has a higher linear velocity than the rolling object because it has no rotational velocity

To know more about static coefficients visit :

https://brainly.com/question/16859236

#SPJ4

The graph shown in the first option nicely plots the lion's and gazelle's velocities as a function of time, so option A is the correct answer.

Velocity is the rate of change of displacement over time.

As mentioned in the problem of running at a constant speed towards a gazelle with a standing lion as shown above.

So option A is correct.

To know more about velocities,

https://brainly.com/question/13471585

#SPJ4

The vehicle is being acted upon by a total force of 0 N when a 900 kg van is traveling at a constant speed of 1.51 m/s due north.

Due to that,

SUV weighs 900 kg.

1.51 m/s is the speed.

SUV is moving northward at a constant pace of 1.51 m/s.

We must compute the force acting on the vehicle.

F = ma

according to Newton's second law (I)

We are aware that the acceleration is the particle's velocity's first derivative.

a = dv / dt

Now, alter equation (I) F = m*dv / dt to reflect the value of a.

Since the SUV is moving at a constant pace, there is no acceleration.

Thus, there will be no force.

As a result, there is no net force exerting on the vehicle.

To know more about force, visit:

https://brainly.com/question/13191643

#SPJ4

The likelihood of having a kid with a birth defect, a developmental disability, or a condition like cancer or heart disease has been linked to several genetic abnormalities. We can better grasp how medical disorders develop thanks to genetics.

The interplay between inherited gene variations and environmental factors, such as chemicals, physical factors, infectious agents, behavioral or nutritional factors, result in risks for nearly all human diseases.

Additionally, genes can raise a family's risk of contracting specific diseases. Families share environments, diets, and routines. These have an impact on our long-term health. Your family learns a lot about you, including what can make you ill.

To know more about genetic factors visit:-

https://brainly.com/question/29517743

#SPj4

The volume of the given  solid is:

V = ∭(D) dx dy dz = (1/2) * 9/2 * 9/2 = 81/8

To find the volume of the solid, we can use the triple integral. Since the solid is bounded by the planes z = x, y = x, x + y = 9, and z = 0, we can write the integral as:

V = ∭(D) dV = ∭(D) dx dy dz

where D is the region bounded by the given planes.

To set up the triple integral, we need to determine the bounds for the variables x, y, and z. Since the solid is bounded by the planes z = x, x + y = 9, and y = x, we can express z in terms of x and y. We have:

z = x

Since x + y = 9, we can also express y in terms of x:

y = 9 - x

Substituting this expression for y into the equation for z, we get:

z = x = x

Therefore, the bounds for x are 0 ≤ x ≤ 9/2. The bounds for y are 0 ≤ y ≤ 9 - x, and the bounds for z are 0 ≤ z ≤ x.

Using these bounds, we can set up the triple integral as follows:

V = ∭(D) dx dy dz = ∫x=0 to x=9/2 ∫y=0 to y=9-x ∫z=0 to z=x 1 dz dy dx

Evaluating this integral, we find that the volume of the solid is:

V = ∭(D) dx dy dz = (1/2) * 9/2 * 9/2 = 81/8

Therefore, the volume of the solid is 81/8.

Learn more about solids, here:

https://brainly.com/question/9363272

#SPJ1

Solar energy known as wind is created as air moves in relation to the Earth's surface. This type of energy is produced by the uneven heating of the Earth's surface by the Sun and is influenced by the rotation of the planet and the topography of its surface.

In the field of renewable energy, wind and solar energy are major actors. They are free energy sources, limitless, and most of all, they reduce carbon emissions from fossil fuels.

By turning the kinetic energy of moving air into electrical, wind is used to generate power. Wind drives the rotor blades of contemporary wind turbines, which transform kinetic energy into rotational energy.

To know more about wind and solar energy visit:-

https://brainly.com/question/16524443

#SPj4

Answer:

b warming your hands over a campfire.

Explanation:

This is thermal radiation, not heat conduction

The sound level intensity would this person hear is  116.98 dB

How is loudness of a sound measured?

The formula D = 10 log (I/I₀),  determines the decibel level of a sound. , I is its intensity in watts per square metre and I₀  is the intensity of threshold sound,

In the first case, sound is produced by 12 identical speakers

∴Intensity, I₁ = 12 I

where I is the intensity of one speaker

Decibel level in this case, D =  120dB

⇒  120 = 10× log (12I/i₀)                                 ----- eqn(1)

In second case number of speakers is reduced to 6

∴Intensity, I₂ = 6 I

Decibel level in this case, D = 10× log (6I/i₀)    ----eqn(2)

eqn(1)- eqn(2)⇒

120 - D =  10× log (12I/i₀)  - 10× log (6I/i₀)

120 - D =  10× log (12I/i₀ ÷  6I/i₀)

120 - D =  10× log(12 I/6 I)

120 - D =  10× log(2)

120 - D =  3.010

D = 116.98 dB

Therefore the sound level intensity would this person hear is  116.98 dB

To learn more about sound intensity below is the given link:

https://brainly.com/question/26861471

#SPJ4

The absence of actual relative sliding action between two surfaces is referred to as kinetic friction, also known as sliding resistance. Let's start by looking into friction force utilizing a straightforward concept.

What is the kinetic friction force?

Since it increases to a certain point before beginning to decline when greater power is applied to a object, this is obviously best considered as the biggest benefit: Calculating the kinematic friction force on a flat surface is easy; however, a sloped surface poses some extra difficulties.

What is friction, why is it important?

Friction is simply the force that prevents something from slipping. Every object experiences kinetic friction, which prevents many objects from moving at once. the force

To know more about kinetic friction visit:

https://brainly.com/question/17237604

#spj4

The shorter the wavelengths and higher the frequency corresponds with greater energy. So the longer the wavelengths and lower the frequency results in lower energy. The energy equation is E = hν.

A wavelength's frequency and energy (E) drop as it gets longer. You may conclude from these equations that the wavelength gets shorter as the frequency rises. The wavelength lengthens as the frequency drops. The two main categories of waves are electromagnetic and mechanical. Frequency and Wavelength are mutually exclusive. The frequency and energy decrease as the wavelength increases. The frequency and energy increase with decreasing wavelength. Because the fraction decreases as the denominator increases, energy decreases as a result. As a result, the connection between energy and wavelength is inverse. These are the wavelength and energy frequency relationships.

to know more about energy please visit.

https://brainly.com/question/1932868

#SPJ4

Answer:

Greater energy is correlated with shorter wavelengths and higher frequencies. Therefore, lower energy is produced by longer wavelengths and lower frequencies. E = hv is the energy equation.

Explanation:

As a wavelength lengthens, its frequency and energy (E) decrease. These calculations may lead you to the conclusion that as frequency increases, wavelength decreases. As the frequency decreases, the wavelength grows longer. Electromagnetic and mechanical waves fall into the two primary groups. Wavelength and Frequency cannot coexist. As the wavelength lengthens, the frequency and energy decrease. As the wavelength decreases, the frequency, and energy rise. Energy diminishes as a result of the proportion decreasing as the denominator rises. The relationship between energy and wavelength is therefore inverse. These are the correlations between energy frequency and wavelength.

to know more about wavelength please visit.

https://brainly.com/question/29037720

#1234

If megans 454.5 kg car drives off a 100.0 m tall cliff with a horizontal velocity of 8.25m/s the car will land 37.1 m from the edge of the cliff.

To determine where Megan's car will land after driving off a 100.0 m tall cliff, you will need to consider the horizontal velocity of the car, the time it takes for the car to fall, and the acceleration due to gravity.

The horizontal velocity of the car will not affect the landing point, as it is a horizontal velocity and will not affect the vertical displacement of the car.

To determine the time it takes for the car to fall, you can use the equation:

t = sqrt(2*h/g)

where t is the time it takes for the car to fall, h is the height of the cliff (100.0 m in this case), and g is the acceleration due to gravity (9.8 m/s^2).

Plugging in the values, you get:

t = sqrt(2*100.0 m/9.8 m/s^2)

t = sqrt(20.4)

t = 4.5 s

To determine the distance the car will travel horizontally in this time, you can use the equation:

d = v * t

where d is the distance traveled, v is the horizontal velocity (8.25 m/s in this case), and t is the time it takes for the car to fall (4.5 s in this case).

Plugging in the values, you get:

d = 8.25 m/s * 4.5 s

d = 37.1 m

To know more about velocity

https://brainly.com/question/18084516

#SPJ4

Wavelength and frequency are inversely proportional to one another.The wavelength of a wave that has a high frequency is also its shortest.

To learn more about wavelength refer

https://brainly.com/question/10728818

#SPJ4

A radioisotope with an 8-day half-life is iodine-131. By emitting beta particles, it decomposes into xenon-131. Any sample of iodine-131 will have half of its atoms destroyed after eight days.

The half-life is the length of time it takes for an isotope to decay from a given amount by half. For instance, carbon-14 has a 5,730-year half-life. Assume you begin with 100 grams of carbon-14. Half of it decays in 5,730 years.

The half-life of this isotope is 8.04 days. What portion of a 13153I original sample is still present after 30.0 days? We desire the proportion of7.53% of the initial sample is still present after 30 days, or, to put it another way, we want the ratio N(30 days)/No.

To know more about radioisotope visit:-

https://brainly.com/question/13076859

#SPJ4

Answer: No

Explanation:

Frequency is how often each wave passes

Wavelength is the physical measure of the length of each wave

All life on earth originates from carbon dioxide, which is why carbon dioxide is necessary for the sustenance of life.

Carbon dioxide is required for the internal respiration of a human body. Internal respiration is the mechanism through which oxygen and carbon dioxide are given to and eliminated from human tissues. Carbon dioxide, which is vital for survival, shields the blood's pH.

Without CO2, plants would die out and the biological food cycle on earth would be irreparably damaged. We cannot survive without CO2. However, because it traps heat, increased CO2 levels are now contributing to climate change.

To know more about carbon dioxide visit:-

https://brainly.com/question/13955724

#SPJ4

To get the resonant frequencies of a single cohesive wave, just use formula v = f.The wave velocity is denoted by the letter "v," while the wave's distance is denoted by the symbol "."

The length of the string:

L=75.0 cm=0.75 m

The two resonant frequencies:

450 Hz Λ 308 Hz

a) f1=142 Hzf1​=142 Hz

b)v=213 msv=213 sm​

Gamma rays often have the greatest frequency, while radio waves typically have the lowest.

The fundamental frequency is the lowest frequency that can be produced by a certain instrument.A first harmonic of a instrument is another name for the fundamental frequency.

To know more about frequencies visit:

https://brainly.com/question/5102661

#SPJ4

0.25 m is the radius of the coil. when a round flat metal coil has 180 turns and negligible resistance.

the action of defending oneself from an aggressor or refusing to accept something.

We must take the Faraday law into account in order to explain this issue.

When the magnetic field changes due to the induced emf, as indicated by the equation d/dt, the voltage equals I*R=17*6=102 V.

After a coil, the magnetic flux is as follows:

If N is equal to N*A*B, then d is equal to N*A*dB/dt, where A and N are the coil's area and number of turns.

A=*R2, where R is the coil's radius.

Finally, there is;

dФ/dt= N*π*R^2*dB/dt then

R= [dФ/dt/(N*π*dB/dt)]^1/2= [102/(180*π*3)]1/2=245.2*10^-3=≅0.25m

To know more about resistance visit:-

https://brainly.com/question/29427458

#SPJ4

Yes, the relationship between wavelength (Λ) and frequency (F) is given by the equation v = ΛF, where v is the wave speed (in m/s).
What is wavelentgh?
Wavelength is the distance between two successive peaks or troughs of a wave, such as light, sound, or other forms of energy. It is measured in meters or nanometers and is related to the frequency of the wave, as the frequency is inversely proportional to the wavelength. Wavelength can also be used to describe the physical size of an object, such as a particle or cell.
This equation states that the product of wavelength and its frequency is equal to the wave speed. The equation is also known as the wave equation and is applicable to all types of waves, including electromagnetic, sound, and seismic waves.
The equation is derived from the fact that the wave's speed is the product of its wavelength and its frequency. Wavelength is the distance between two successive wave peaks and frequency is the number of wave peaks that pass a certain point per second. Therefore, if the wavelength is shorter and the frequency is higher, the wave's speed is higher.
To know more about the wavelength click-
https://brainly.com/question/10750459
#SPJ4

The general differential equation of wave motion is ∂t∂y=v2∂x∂y.

All of the quantities in the wave equation, which is provided by y = 0.002 sin 2(5t - x/12), are given in SI units. After 0.2 seconds, determine the particle's displacement at a distance of 5 m from the origin.

Applying F=ma to a string of infinitesimal length dx yields the wave equation (see the diagram below). We imagine the basic harmonic motion of our tiny length of string bobbing up and down.

Since the fundamental wave equation is a linear differential equation, the superposition principle will be respected. This means that the displacements that would have been created by each wave individually are added to create the net displacement that is caused by two or more waves.

To learn more about wave motion from given link

https://brainly.com/question/1314101

#SPJ4

The pin will accelerate up and to the left.

The net force is in upward direction and to the left direction. So, pin will have acceleration up and left.

In vertical direction,

upward force = 3 N,

Downward force = 1 N

So, net upward force is = 3-1 N = 2 N

In horizontal direction,

force to the right is = 5 N

Force to the left is = 8 N

So, net force to the left is = 8-5 N = 3 N.

Net force is an unbalanced force in the direction of the greater force if the two forces are acting on an object in the opposite direction.

To know more about net force here

brainly.com/question/29261584

#SPJ4

The voltage of the stove with a current of 3 amperes, which run through the coiled heating element of a stove and the resistance of the element is 80 ohms, is 360 volts.

Voltage, also known as electric pressure, is the difference in electric potential between two points. In a static electric field, it corresponds to the work needed per unit of charge to move a test charge between the two points.

From the question given

resistance (R) = 80 ohms

Current (I) = 3 amperes

from Ohm's law we will use this equation

V = I * R

= 3 * 80

= 240volts.

Therefore, the voltage of the stove is 240 volts.

Learn more about voltage https://brainly.com/question/13521443

#SPJ4

The relation between the amplitude of a wave and its speed is an important multiple choice question (MCQ) in physics and other related sciences.

Amplitude is a measure of the magnitude of a wave or signal. It is the maximum absolute value of the wave or signal over a given period of time and is usually measured in decibels (dB). Amplitude also refers to the maximum displacement of a point on a wave from its rest position. In sound, amplitude is often referred to as “volume” or “loudness”.
The amplitude of a wave is the maximum displacement of a particle from its equilibrium position and is measured in meters (m). The speed of a wave is the distance it travels in a given amount of time and is measured in meters per second (m/s).
As the amplitude of a wave increases, its speed remains constant. This is due to the fact that the speed of a wave is determined by the medium in which it is traveling, not its amplitude. For example, the speed of sound in air is the same regardless of how loud it is. The speed of light in a vacuum is also constant regardless of the intensity of the light. This means that the amplitude of a wave does not affect its speed.
However, the amplitude of a wave does affect its energy. The higher the amplitude of a wave, the more energy it carries. This is because the amplitude of a wave is directly related to the amount of energy it contains. This is why it is important to remember that the amplitude of a wave does not affect its speed, but it does affect its energy.
To know more about amplitude click-
https://brainly.com/question/3613222
#SPJ4

Answer:

The answer is probably D

Explanation:

None others make sense

The molar mass of the gas with specified density and pressure at certain temperature is calculated to be 64.02 mol⁻¹.

Given,

ρ = 2.09 g/l

T = 100° C

P = 1 atm

Molar mass (Mm) can be written as the ratio of given mass of the gas (m) and number of moles (n) it contains.

Mm = m / n ---(1)

Density can be written as the ratio of mass and volume.

ρ = m / V ---(2)

Placing (1) and (2) in ideal gas law equation, we have

P V = n R T

"P V = m / Mm × R T"

Making Mm as subject, we have,

Mm = m / V × R T/P

Convert the temperature of the gas from degrees Celsius to Kelvin then substituting the values,

Mm = m / V × R T/P

Mm = 2.09 g/l × 0.0821 atm L/mol K× (100 + 273.15)K × 1/ 1 atm = 64.02 mol⁻¹

To know more about molar mass:

https://brainly.com/question/1486415

#SPJ4

Answer:

A is the right answer

Explanation:

mark me as a

Answer: B) Hydrogen should be moved to the right on the Periodic Table.

The kineticE=(1/2)mv² equation can be used to determine the velocity of the expelled electron. You then enter the expelled electron's energy, which was provided to you in section a, and set it to equal 1/2 the electron's mass times v².

The discovery of the "photon," or the link between light's energy and frequency, was made possible in large part by the photoelectric effect. The photoelectric effect is simply the phenomenon whereby electrons can occasionally be expelled from a metal when light is shone onto it. We looked over a number of important facts in class.

1. No electrons are emitted unless appropriate frequency of light is employed. In other words, there is a point below which, regardless of how powerful the light source is, no electrons escape the metal.

2. If you are employing light with a high enough frequency, the quantity of electrons ejected grows as the light source's intensity (brightness) rises.

3. The velocity of the expelled electrons increases as the frequency is raised above the threshold.

This leads us to the conclusion that energy and frequency are proportionate, with Planck's constant serving as the proportionality constant.

To learn more about maximum speed of electrons from given link

https://brainly.com/question/29573654

#SPJ4