find the area of the surface obtained by rotating the curve =cosh(/),−≤≤, about the -axis.

The probability that Steph Curry shoots exactly 20 free throws, including the one he misses, is approximately 0.0114 or 1.14%.

this probability problem involves free throws.

Steph Curry is a 91% free-throw shooter, which means his probability of making a free throw is 0.91, and the probability of missing one is 0.09 (since probabilities must add up to 1).

To find the probability that he shoots exactly 20 free throws (including the one he misses), we need to consider that he makes the first 19 shots and misses the 20th one.

Step 1: Calculate the probability of making 19 consecutive shots.
This is simply the probability of making a shot raised to the 19th power: (0.91)^19.

Step 2: Calculate the probability of missing the 20th shot.
The probability of missing a shot is 0.09.

Step 3: Multiply the probabilities from Steps 1 and 2.
(0.91)^19 * 0.09

Step 4: Compute the final probability.
(0.91)^19 * 0.09 ≈ 0.0114

So, the probability that Steph Curry shoots exactly 20 free throws, including the one he misses, is approximately 0.0114 or 1.14%.

to learn more about probability click here:

https://brainly.com/question/15124899

#SPJ11

There is a significant difference between the average numbers of traffic accident related emergency room admissions between Friday the 6th and Friday the 13th.

To conduct a hypothesis test to evaluate if there is a difference between the average numbers of traffic accident related emergency room admissions between Friday the 6th and Friday the 13th, we can use a paired t-test. The null hypothesis would be that there is no difference between the means of the two populations, while the alternative hypothesis would be that there is a difference.

We can calculate the paired differences by subtracting the number of admissions on Friday the 6th from the number of admissions on Friday the 13th. Then we can calculate the mean and standard deviation of these differences. Using the given data, the mean of the differences is 10.83 - 7.5 = 3.33 and the standard deviation of the differences is 3.6.

Next, we can calculate the t-statistic by dividing the mean difference by the standard deviation of the differences and multiplying by the square root of the sample size. Using the given data, the t-statistic is (3.33 - 0) / (3.6 / sqrt(6)) = 3.07.

We can look up the critical value for a two-tailed test with 5 degrees of freedom (n-1) at a significance level of 0.05. The critical value is 2.571.

Learn more about statistics here: brainly.com/question/14128303

#SPJ11

If xi and yi are positively correlated in the sample, then the estimated slope is :
b. greater than zero.

When xi and yi are positively correlated, it means that as the value of xi increases, the value of yi also increases, and vice versa. In this case, the estimated slope of the regression line will be greater than zero, indicating a positive relationship between xi and yi.

The estimated slope, often denoted as "b" in a simple linear regression model (y = a + bx), quantifies the change in the dependent variable (yi) for each unit change in the independent variable (xi). In the case of a positive correlation, the estimated slope (b) would be greater than zero, indicating that for each unit increase in xi, yi is expected to increase by an amount equal to the estimated slope (b).

Learn more about : Slope - https://brainly.com/question/31499734

#SPJ11

The probability is approximately 0.4313, or 43.13%.

Assuming that there are 365 days in a year (ignoring leap years), the probability that no two people out of a group of 25 have the same birthday can be found as follows:

First, consider the probability that the first person has a unique birthday, i.e., not the same as any of the previous birthdays. The probability of this happening is 365/365, since there are no previous birthdays to match.

Next, consider the probability that the second person has a unique birthday, given that the first person has a unique birthday. The probability of this happening is 364/365, since there are 364 remaining days for the second person to choose from, out of 365 total days.

Similarly, the probability that the third person has a unique birthday, given that the first two people have unique birthdays, is 363/365, since there are 363 remaining days to choose from out of 365 total days.

We can continue this process for all 25 people. Therefore, the probability that no two people out of a group of 25 have the same birthday can be calculated as:

P(no two people have the same birthday)=[tex]\frac{365}{365}[/tex] [tex]* \frac{364}{365} * \frac{363}{365} *.........* \frac{341}{365}[/tex]

This product can be calculated using a calculator or a spreadsheet. The result is approximately 0.4313, or 43.13%.

Therefore, the probability that no two people out of a group of 25 have the same birthday is approximately 0.4313, or 43.13%.

Learn more about probability

brainly.com/question/30034780

#SPJ11

a. To calculate a margin of error, we should assume that the population of typical one-hour massage therapy sessions is normally distributed and the sample of 12 sessions is a random sample taken from the population.

Margin of error is the amount of error that is acceptable in a statistical study.

It represents the degree of uncertainty in a measurement or survey result.

b. Using 95% confidence, the margin of error can be calculated as:

Margin of Error = z×(o/√(n))

Where z is the z-score for the desired confidence level (1.96 for 95% confidence), o is the population standard deviation ($5.55), and n is the sample size (12).

Margin of Error = 1.96×($5.55/√(12)) =$3.80

Therefore, the margin of error is $3.80 (to 2 decimals) at 95% confidence.

c. Using 99% confidence, the margin of error can be calculated as:

Margin of Error = z×(o/√(n))

Where z is the z-score for the desired confidence level (2.576 for 99% confidence), o is the population standard deviation ($5.55), and n is the sample size (12).

Margin of Error = 2.576×($5.55/√(12)) ≈ $5.13

Therefore, the margin of error is $5.13 (to 2 decimals) at 99% confidence.

To know more about standard deviation visit:

https://brainly.com/question/29808998

#SPJ1

a. To calculate a margin of error, we should assume that the population of typical one-hour massage therapy sessions is normally distributed and the sample of 12 sessions is a random sample taken from the population.

Margin of error is the amount of error that is acceptable in a statistical study.

It represents the degree of uncertainty in a measurement or survey result.

b. Using 95% confidence, the margin of error can be calculated as:

Margin of Error = z×(o/√(n))

Where z is the z-score for the desired confidence level (1.96 for 95% confidence), o is the population standard deviation ($5.55), and n is the sample size (12).

Margin of Error = 1.96×($5.55/√(12)) =$3.80

Therefore, the margin of error is $3.80 (to 2 decimals) at 95% confidence.

c. Using 99% confidence, the margin of error can be calculated as:

Margin of Error = z×(o/√(n))

Where z is the z-score for the desired confidence level (2.576 for 99% confidence), o is the population standard deviation ($5.55), and n is the sample size (12).

Margin of Error = 2.576×($5.55/√(12)) ≈ $5.13

Therefore, the margin of error is $5.13 (to 2 decimals) at 99% confidence.

To know more about standard deviation visit:

https://brainly.com/question/29808998

#SPJ1

The solution to the initial value problem is:  y(x) = (1/3)eˣ - (5/3)e⁴ˣ. This can be answered by the concept of General solution.

To solve the initial value problem y"-5y'+4y=0; y(0)=-4/3, y'(0)=-19/3, we first find the characteristic equation which is r²- 5r + 4 = 0.

Solving this equation gives us roots r = 1 and r = 4.

Therefore, the general solution is y(x) = c1eˣ + c2e⁴ˣ.

Using the initial conditions, we can solve for the constants c1 and c2.

First, we find y(0) which gives us:

y(0) = c1 + c2 = -4/3

Next, we find y'(0) which gives us:

y'(0) = c1 + 4c2 = -19/3

We can now solve for c1 and c2 by solving the system of equations:

c1 + c2 = -4/3

c1 + 4c2 = -19/3

Subtracting the first equation from the second gives us:

3c2 = -5

Therefore, c2 = -5/3. Substituting this value into the first equation gives us:

c1 = -4/3 - (-5/3) = 1/3

So the solution to the initial value problem is:

y(x) = (1/3)eˣ - (5/3)e⁴ˣ

To learn more about General solution here:

brainly.com/question/13609544#

#SPJ11

The exact angular velocity in radians per unit time is approximately 2.41 radians/sec.

The angular velocity (ω) is defined as the change in the angle (θ) per unit time (t). In this case, we are given θ in degrees and t in seconds, so we need to convert θ to radians and then use the formula:

ω = Δθ / Δt

To convert θ from degrees to radians, we multiply by π/180:

θ = 690° × π/180 ≈ 12.05 radians

Now we can plug in the given values to find the angular velocity:

ω = Δθ / Δt = 12.05 radians / 5 sec ≈ 2.41 radians/sec

Therefore, the exact angular velocity in radians per unit time is approximately 2.41 radians/sec.

To learn more about angular visit:

https://brainly.com/question/14769426

#SPJ11

The two points on the curve where the tangent line is horizontal are (2,26) and (-2,26).

To find where the tangent line is horizontal, we need to find where the derivative of y with respect to x (dy/dx) equals 0.

First, we need to express y in terms of x. We can do this by eliminating t from the two parametric equations.

From x=2(sin(t)+cos(t)), we get sin(t) = (x/2) - cos(t).
From y=36−10cos2(t)−20sin(t), we substitute sin(t) with the above expression and get:
y = 36 - 10cos²(t) - 20((x/2) - cos(t))

Simplifying this expression, we get:
y = -10cos²(t) - 10x + 36

Next, we need to find the derivative of y with respect to x:
dy/dx = -10sin(2t)/(dx/dt)

From x=2(sin(t)+cos(t)), we get dx/dt = 2(cos(t)-sin(t))

Substituting this into the above equation for dy/dx, we get:
dy/dx = -5sin(2t)/(cos(t)-sin(t))

Setting dy/dx equal to 0, we get:
0 = -5sin(2t)/(cos(t)-sin(t))

This means sin(2t) = 0, or t = 0 or t = π/2.

Plugging these values into the parametric equations for x and y, we get:
When t=0: x = 2, y = 26
When t=π/2: x = -2, y = 26

Thus, the two points on the curve where the tangent line is horizontal are (2,26) and (-2,26).

To learn more about tangent line here:

brainly.com/question/31326507#

#SPJ11

In the parallelogram  QRST, the value of x is 2, ∠UTQ =  54 degrees and angle ∠UQT = 44 degrees

The given parallelogram is QRST

We have to find the value of x

4x+2=10

Subtract 2 from both sides

4x=8

Divide both sides by 4

value x=2

Let us find ∠RUS

By angle sum property of triangle

∠RUS + 36+ 43 =180

∠RUS + 79 =180

∠RUS = 101

Now let us find ∠UTQ

36+ ∠UTQ = 90

∠UTQ = 90-36

∠UTQ =  54 degrees

∠UQT+46 =90

∠UQT = 90-46

∠UQT = 44 degrees

To learn more on Coordinate Geometry click:

brainly.com/question/27326241

#SPJ1

The maximum rate of change of  f(x, y, z) = xy + yz − xz at the point P₀(3, −1, 4) is 3√(10).

To find the maximum rate of change of a function at a given point, we need to calculate the magnitude of the gradient vector at that point.

The gradient vector of the function f(x, y, z) is given by

grad(f) = (partial f / partial x, partial f / partial y, partial f / partial z)

Taking partial derivatives of f(x, y, z) with respect to x, y, and z, we get:

partial f / partial x = y - z

partial f / partial y = x + z

partial f / partial z = y - x

So the gradient vector at any point (x, y, z) is

grad(f) = (y - z, x + z, y - x)

At the point P₀(3, −1, 4), the gradient vector is:

grad(f) = (-5, 7, -4)

The maximum rate of change of f at P₀ is the magnitude of this gradient vector

|grad(f)| = √((-5)^2 + 7^2 + (-4)^2) = sqrt(90) = 3√(10)

Learn more about gradient vector here

brainly.com/question/29815461

#SPJ4

The given question is incomplete, the complete question is:

Find the maximum rate of change of the function f(x, y, z) = xy + yz − xz at the point P₀(3, −1, 4).

The result for this percentage question is deducting 52 from 10.4 is -41.6.

How much is a percentage?

A rate, number, or amount in each hundred is referred to as a percentage. Although "pct," "pct," and occasionally "pc" are also used as abbreviations, the percent symbol "%" is most usually used to denote it.

A % lacks a measurement unit and is a dimensionless (pure) number

An accepted quantity that is used to represent a physical quantity is called a measurement unit. The factor used to represent how many instances of a given physical property there are is the standard quantity of that property.

You may get 10.4 by multiplying 52 by 0.2 (20% as a decimal),

20/100=0.2

which is 52 times 20%.

The result of deducting 52 from 10.4 is -41.6.

Complete question given below:

To know more about percentage visit:

brainly.com/question/31060287

#SPJ1

What is the value of 52 times 20% minus 52?

The ratio of female to male members is 40:25, or 4:2. This can be expressed as a common fraction as 4/2 or 2/1.

A fraction is a way of representing a numerical value that is not a whole number. It is written in the form of a ratio and consists of a numerator and a denominator. The numerator represents the number of equal parts being considered, while the denominator represents the total number of parts that make up the whole. Fractions are used to express part of a whole, such as when a pizza is divided into 8 equal slices, each slice would be represented as 1/8 of the pizza. Fractions are also used to represent a ratio between two numbers, such as when a recipe calls for 2/3 cup of sugar. In mathematics, fractions are used to represent division, to compare quantities, and to solve equations.

The ratio of female to male members can be found by taking the ratio of the average age of the female members to the average age of the male members.
Therefore, the ratio of female to male members is 40:25, or 4:2. This can be expressed as a common fraction as 4/2 or 2/1.

To learn more about fraction
https://brainly.com/question/17220365
#SPJ1

For the given function f(x) the graph has a domain of (-5 , 0). For the function g(x) represented by the table the domain is given by the values (-3, 3).

The set of all potential inputs or independent variables for which a function is defined is known as the domain of the function in mathematics. In other words, it is the collection of all possible x-values for the function. On the other hand, the collection of all potential dependent variables or outputs that a function may produce for the specified inputs is known as the range of the function. It is the collection of all y-values that the function is capable of producing.

Given that the function f(x) is the graph while the function g(x) is represented by the table.

For the given function f(x) the graph has a domain of (-5 , 0). The range of the function is (4, infinity). The vertex of the function is given by the coordinates (2, 4). The axis of symmetry of the parabola is x = -2.

For the function g(x) represented by the table the domain is given by the values (-3, 3). The range of the function is given as (25, 1). The x-intercept is at the point 2. The y-intercept is at the point 4.

Learn more about domain here:

https://brainly.com/question/29452843

#SPJ1

Okay, let's solve this step-by-step:

P(A) = 9

P(B) = 9

P(A and B) = ?

We don't have enough information to calculate P(A and B) directly.

So we use the inclusion-exclusion principle:

P(A or B) = P(A) + P(B) - P(A and B)

= 9 + 9 - ?

= 18 - ?

Since probabilities must be between 0 and 1, the largest this could be is 18.

So 18 - ? must equal 0.82.

? = 12

Therefore, P(A and B) = 12

And the final solution is:

P(A or B) = 0.82

Rounded to the nearest hundredth.

Does this help explain the solution? Let me know if you have any other questions!

The probability of either A or B occurring is 0.2.

Probability in mathematics is the possibility of an event in time. In simple words how many times does that incident is happening in any given time interval?

To find the probability that either event will occur, we need to find the total number of outcomes in the sample space.

From the given information, we can see that there are 9 + 9 + 9 + 9 + 9 = 45 possible outcomes in the sample space.

The probability of either A or B occurring can be found by adding the probability of A occurring to the probability of B occurring and then subtracting the probability of both A and B occurring at the same time (to avoid double-counting).

The probability of A occurring is (9 + 9 - 9) / 45 = 9/45 = 0.2

(The first 9 represents the number of outcomes in circle A, the second 9 represents the number of outcomes in the rectangle outside of A but inside the square, and the -9 represents the overlapping outcomes in the intersection of A and B that we don't want to count twice).

The probability of B occurring is (9 + 9 - 9) / 45 = 9/45 = 0.2

(The first 9 represents the number of outcomes in circle B, the second 9 represents the number of outcomes in the rectangle outside of B but inside the square, and the -9 represents the overlapping outcomes in the intersection of A and B that we don't want to count twice).

The probability of both A and B occurring at the same time is 9/45 = 0.2 (since this is the number of outcomes in the intersection of A and B divided by the total number of outcomes in the sample space).

Therefore, the probability of either A or B occurring is:

0.2 + 0.2 - 0.2 = 0.2

So the probability that either event will occur is 0.2 or 20% (rounded to the nearest hundredth).

To learn more about the probability;

brainly.com/question/11234923

#SPJ2

This is a common approach in dynamic programming, and it allows us to solve complex problems efficiently by avoiding redundant computations

Based on the given scenario, it seems that the dynamic programming algorithm follows the principle of optimal substructure, where the solution to a problem can be obtained by combining the solutions of its subproblems.

Here, the algorithm creates an n m table, meaning it will have n rows and m columns. To compute each entry of the table, it takes a minimum over at most m other previously computed entries. This suggests that the algorithm is using the concept of the minimum substructure, where it tries to find the minimum cost/path/sum to reach a certain point by taking the minimum of all the possible subproblems.

Overall, the given information indicates that the dynamic programming algorithm is likely solving a problem where we need to find the optimal solution by breaking it down into smaller subproblems and taking the minimum of all the possible solutions. This is a common approach in dynamic programming, and it allows us to solve complex problems efficiently by avoiding redundant computations.

learn more about dynamic programming algorithm

https://brainly.com/question/18720923

#SPJ11

The speed of the cheetah in km/h is 106.2 km/h (rounded to one decimal place).

To convert the speed of 29.5 m/s to km/h, we can use the conversion factor: 1 km = 1000 m and 1 h = 3600 s.

First, we need to convert meters per second to meters per hour by multiplying the speed by 3600 (the number of seconds in an hour):

29.5 m/s x 3600 s/h = 106,200 m/h

Next, we need to convert meters per hour to kilometers per hour by dividing the speed by 1000:

106,200 m/h ÷ 1000 = 106.2 km/h

Therefore, the cheetah was running at a speed of 106.2 km/h.

Learn more about speed

https://brainly.com/question/26046491

#SPJ4

The area of the composite figure with dimensions 8cm, 5cm, 12cm, and 2cm is 64 square cm.

To calculate the area of the composite figure with dimensions 8cm, 5cm, 12cm, and 2cm, we need to first identify the shapes involved and then find their areas.

Identify the shapes: It seems that the composite figure consists of two rectangles.

Let's assume the first rectangle has dimensions 8cm and 5cm, and the second rectangle has dimensions 12cm and

2cm.

Calculate the area of each rectangle:

For the first rectangle:

Area = length x width = 8cm x 5cm = 40 square cm

For the second rectangle:

Area = length x width = 12cm x 2cm = 24 square cm

Add the areas of both rectangles to find the total area of the composite figure:

Total Area = Area of first rectangle + Area of second rectangle

                 = 40 square cm + 24 square cm

                = 64 square cm

So, the area of the composite figure with dimensions 8cm, 5cm, 12cm, and 2cm is 64 square cm.

for such more question on dimensions

https://brainly.com/question/28107004

#SPJ11

Given the position function r(t) = ti + (2t^2 + 7)j, we can find the velocity and acceleration vectors by taking the first and second derivatives of r(t) with respect to time t.

1. Find the velocity vector v(t) by taking the first derivative of r(t):

v(t) = dr(t)/dt

= (d(t)/dt)i + (d(2t^2 + 7)/dt)j v(t)

= (1)i + (4t)j

2. Find the acceleration vector a(t) by taking the second derivative of r(t):

a(t) = dv(t)/dt

= (d(1)/dt)i + (d(4t)/dt)j a(t)

= (0)i + (4)j

Now we can find the velocity and acceleration vectors at t = 0:

v(0) = (1)i + (4*0)j

= i a(0)

= (0)i + (4)j

= 4j

So the velocity vector at t = 0 is v(0) = i, and the acceleration vector at t = 0 is a(0) = 4j.

To sketch them as vectors on the curve, draw the parabola y = 2x^2 + 7. At the point (0,7), which corresponds to t = 0, draw the velocity vector as a horizontal arrow pointing to the right (since it is i), and draw the acceleration vector as a vertical arrow pointing upward (since it is 4j).

Learn more about velocity,

https://brainly.com/question/25749514

#SPJ11

Answer:

29

Step-by-step explanation:

362.5/12.5 =29

The wave functions and probability distributions for a particle trapped in a finite square well can be complex, but understanding these concepts is essential for understanding the behavior of particles in quantum mechanics.

To sketch the wave functions and probability distributions for the n = 4 and n = 5 states of a particle trapped in a finite square well:

We need to first understand what these terms mean.

Wave functions are mathematical functions that describe the behavior of particles in quantum mechanics. They represent the probability amplitude of finding a particle in a certain state, and can be used to calculate the probability of finding the particle in a certain location.

Probability distributions, on the other hand, describe the probability of finding a particle in a certain location at a certain time. They are calculated by squaring the wave function and normalizing the result.

Now, let's consider a particle trapped in a finite square well. This means that the particle is confined to a certain region of space, and can only exist within that region. The wave function for a particle in this situation can be expressed as a combination of sine and cosine functions.

For the n = 4 and n = 5 states, the wave functions will have four and five nodes, respectively. These nodes represent regions where the probability of finding the particle is zero.

To sketch the probability distributions, we need to square the wave functions and normalize the result. This will give us a graph that shows the probability of finding the particle at different locations within the well.

Overall,the wave functions and probability distributions for a particle trapped in a finite square well can be complex, but understanding these concepts is essential for understanding the behavior of particles in quantum mechanics.

To now more about Probability:

https://brainly.com/question/30034780

#SPJ11

The point estimate of the difference between the two population proportions is 0.024.

The point estimate of the difference between two population proportions can be calculated using the following formula:

[tex]\hat{p}1 - \hat{p}2 = (x1/n1) - (x2/n2)[/tex]

where [tex]\hat{p1}[/tex] and [tex]\hat{p2 }[/tex] are the sample proportions, x1 and x2 are the number of failures in each sample, and n1 and n2 are the sample sizes.

Using the given data:

[tex]\hat{p1}[/tex]  = 53/400 = 0.1325

[tex]\hat{p2 }[/tex] = 51/470 = 0.1085

n1 = 400

n2 = 470

Substituting these values into the formula, we get:

[tex]\hat{p1}-\hat{p2}[/tex]  = (0.1325) - (0.1085) = 0.024.

For similar question on population.

https://brainly.com/question/30396931

#SPJ11

The required answer is  If t: R2 → R2 rotates vectors about the origin through an angle φ.

If t rotates vectors about the origin through an angle φ, then it satisfies the properties of linearity: t(u+v) = t(u) + t(v) and t(cu) = ct(u) for any vectors u,v in r2 and scalar c. Therefore, t is a linear transformation.
True: If t: R2 → R2 rotates vectors about the origin through an angle φ, then t is a linear transformation.

Transformation of three phase electrical quantities to two phase quantities is a usual practice to simplify analysis of three phase electrical circuits. Polyphase  machines can be represented by an equivalent two phase model provided the rotating polyphases winding in rotor and the stationary polyphase windings in stator can be expressed in a fictitious two axes coils. The process f replacing one set of variables to another related set of variable is called winding transformation or simply transformation or linear transformation. The term linear transformation means that the transformation from old to new set of variable and vice versa is governed by linear equations. The equations relating old variables and new variables are called transformation equation and the following general form:

This is because the rotation of vectors satisfies the properties of a linear transformation, which are:
1. Additivity: t(u + v) = t(u) + t(v) for all vectors u and v in R2.
2. Homogeneity: t(αu) = αt(u) for all vectors u in R2 and all scalars α.

There are at least a countable infinity of rotation vectors corresponding to any rotation. Furthermore, all rotations by 2πM are the same as no rotation at all, so, for a given integer M, all rotation vectors of length 2πM, in all directions, constitute a two-parameter uncountable infinity of rotation vectors encoding the same rotation as the zero vector.

The axis–angle representation is equivalent to the more concise rotation vector, also called the Euler vector. In this case, both the rotation axis and the angle are represented by a vector codirectional with the rotation axis whose length is the rotation angle θ,
Rotating vectors about the origin through an angle φ preserves these properties, making t a linear transformation.

To know more about linear transformation. Click on the link.

https://brainly.com/question/30514241

#SPJ11

which approaches a constant value of around y=-1.5 as t goes to infinity. Therefore, our guess appears to be justified by the differential equation.

First, define the function for the differential equation:

function [tex]dydt = my ode(t,y)[/tex]

[tex]dydt = \frac{(t - e^{(-t)})} {(y + e^{(y)})}[/tex]

end

Next, to solve the initial value problem and obtain the numerical solution:

[tex]t_{span} = [0 2.1];[/tex]

[tex]y_0 = 0.5;[/tex]

Then, plot the solution:

plot(t,y)

[tex]x_{label}('t')[/tex]

[tex]y{label}('y(t)')[/tex]

(b) In this part you should use the results from parts (c) and (d) of Problem 5 in Problem Set B (which appears in the Sample Solutions). Compare the values of the actual solution and the numerical solutions at the four specified points. Plot the actual solution and the numerical solution on the same graph.

Assuming you have already computed the actual solution and stored it in a variable[tex]y_{actual}[/tex], you can compare the actual solution with the numerical solution at the specified points:

[tex]y_{numerical} = interp1(t,y,t_{compare})[/tex]

[tex]y_{actual} = [0.5 -0.2614 -0.8998 -1.1554];[/tex]

Then, plot the actual solution and the numerical solution on the same graph:

[tex]x_{label}('t')[/tex]

[tex]y_{label}('y(t)')[/tex]

legend ('Numerical solution', 'Actual solution')

(c) Now plot the numerical solution on several large intervals (e.g., 1.5 < t < 10 or 1.5< t < 100). Make a guess about the nature of the solution at t->infinity. Try to justify your guess on the basis of the differential equation.

To plot the numerical solution on several large intervals, you can simply increase the range of[tex]t_{span}[/tex] and re-run the ode45 solver:

[tex]t_{span} = [1.5 100];[/tex]

[tex]y_0 = 0.5;[/tex]

plot(t,y)

[tex]x_{label}('t')[/tex]

[tex]y_{label}('y(t)')[/tex]

From the plot, it appears that the solution approaches a horizontal asymptote at around y=-1.5 as t goes to infinity. We can justify this guess by looking at the differential equation:

[tex]dy/dt = (t - e^{(-t)}) / (y + e^y)[/tex]

As t goes to infinity, the numerator grows without bound, while the denominator is bounded by. [tex]e^y[/tex]. Therefore, to keep the derivative bounded, y must approach a constant value. Setting dy/dt to zero and solving for y, we get:

[tex]t - e^{(-t)} = 0[/tex]

which has a solution at t=ln(t). Substituting into the differential equation, we get:

[tex]0 = (ln(t) - e^{(-ln(t))}) / (y + e^y)[/tex]

Solving for y, we get:

[tex]y = -ln(ln(t))[/tex]

plot (t, y)

label('t')

label('y')

title ('Numerical solution for large

To know more about differential equation visit:

https://brainly.com/question/14620493

#SPJ1

Answer:

C

Step-by-step explanation:

[tex]\frac{x+6}{4}[/tex] = 13 ( multiply both sides by 4 to clear the fraction )

x + 6 = 4 × 13 = 52 ( subtract 6 from both sides )

x = 46

Answer:

C

Step-by-step explanation:

Step one x=?

first try a -2.75+6/4=13

u get 0.81=13 so wrong

step 2 try b 1.75+6/4=13

7.75/6=13

1.29=13 wrong

Step 3

46+6/4=13

52/4=13

13=13 Correct

The assumptions needed for the interval in (c) to be valid is the data must be obtained​ randomly, and the expected numbers of successes and failures must both be at least 15. Option B is correct.

The interval in (c) is a confidence interval for a proportion. To use this interval, we need to assume that the data were obtained randomly, and that the expected numbers of successes and failures are both at least 15. This assumption is necessary to ensure that the sampling distribution of the proportion is approximately normal, which is required to use the normal approximation for the confidence interval.

The sample data should be representative of the population, and should not be biased in any way. The sample size should be large enough so that the sampling distribution of the sample proportion is approximately normal. A rule of thumb is that the sample size should be at least 10 times the expected number of successes and failures. In this case, since the sample proportion is 0.7, the expected number of successes and failures are both greater than 15, so this condition is met.

The binomial distribution assumes that each trial has only two possible outcomes, and that the trials are independent. In this case, the outcome of each trial is whether or not a person was able to correctly identify the brand. Since the experiment is a paired difference experiment, it is reasonable to assume that the trials are independent. Option B is correct.

To know more about the Assumptions, here

https://brainly.com/question/15053221

#SPJ4

Rounded to the nearest square inch, the area of triangle EFG is 651 in².

A triangle is a polygon with three sides and three angles. It is a simple closed figure that has three straight sides and three vertices. The sum of the angles in a triangle is always 180 degrees. Triangles can be classified based on their sides and angles. Triangles with all sides and angles equal are called equilateral triangles, triangles with two sides and two angles equal are called isosceles triangles, and triangles with no sides and no angles equal are called scalene triangles. Triangles can also be classified based on their angles, such as acute triangles (all angles less than 90 degrees), right triangles (one angle equal to 90 degrees), and obtuse triangles (one angle greater than 90 degrees). Triangles are important in mathematics, physics, and engineering, and are commonly used in construction and design.

To find the area of triangle EFG, we need to use the formula:

Area = 1/2 * base * height

where the base and height are perpendicular to each other.

Since we know the length of side EF (which is the base), we can use the Pythagorean theorem to find the height of the triangle. The Pythagorean theorem states that:

c² = a² + b²

where c is the length of the hypotenuse (in this case, EG), and a and b are the lengths of the other two sides (in this case, EF and FG).

So, we have:

EG² = EF² + FG²

52² = 30² + FG²

FG² = 52² - 30²

FG ≈ 43.27 in (rounded to the nearest hundredth)

Now that we know the base (EF) and the height (perpendicular to EF), we can calculate the area:

Area = 1/2 * EF * height

Area = 1/2 * 30 in * 43.27 in

Area ≈ 650.55 in²

Rounded to the nearest square inch, the area of triangle EFG is 651 in².

To know more about area visit:

https://brainly.com/question/29183952

#SPJ9

Answer:

127 baseball cards

Step-by-step explanation:

Lucas now has a total of 127 baseball cards.

To find out, you can add up the number of cards he had before (46), the number of cards his grandma gave him (29), and the number of cards his aunt Tammy gave him (52):

46 + 29 + 52 = 127

Hope this helps!

If a 4×4 matrix A with rows v⃗ 1, v⃗ 2, v⃗ 3, and v⃗ 4 has determinant detA= 3 , then det: 10v1+6v2; 5v1+5v2; v3; v4, then the determinant of the new matrix is 48.

To find the determinant of the new matrix, we need to use the properties of determinants. One property states that if we multiply any row of a matrix by a scalar k, then the determinant of the new matrix is k times the determinant of the original matrix.
Using this property, we can find the determinant of the new matrix as follows:
det (10v1+6v2  5v1+5v2  v3  v4)
= 10 det (v1 v2 v3 v4) + 6 det (v2 v1 v3 v4) + 5 det (v1 v2 v3 v4) + 5 det (v2 v1 v3 v4) + det (v1 v2 v3 v4)
= 21 det (v1 v2 v3 v4)
= 21 * det (A)
= 21 * 3
= 63
Therefore, the determinant of the new matrix is 63.
To find the determinant of the new matrix, you can use the property of linearity of determinants with respect to the rows. The new matrix can be written as:
| 10v1+6v2 |   | 10v1 |   | 6v2  |
|  5v1+5v2 | = |  5v1 | + | 5v2  |
|    v3    |   |  v3  |   |  v3  |
|    v4    |   |  v4  |   |  v4  |
Now, we have two separate matrices, and we can find their determinants individually:
det( | 10v1 | ) = 10 det( | v1 | )
    |  5v1 |         | v2 |
    |  v3  |         | v3 |
    |  v4  |         | v4 |
det( | 6v2  | ) = 6 det( | v1 | )
    | 5v2  |         | v2 |
    |  v3  |         | v3 |
    |  v4  |         | v4 |
Using the property of linearity, we can add these determinants together:
10 * detA + 6 * detA = (10 + 6) * detA = 16 * detA = 16 * 3 = 48
So, the determinant of the new matrix is 48.

To learn more about matrix, click here:

brainly.com/question/29132693

#SPJ11

Answer:

The answer for<A=55°,<B=35°