Answer: 40, 4
Explanation:
Write a program, weeklypay.m, that asks an employee to enter their hourly rate and the number of hours they worked for the week. Then have the program calculate and display their weekly pay. pay
Answer:
Follows are the code to this question:
def weeklypay(hour_rate,hour ):#defining a method weeklypay that accepts two parameters
pay=hour_rate* hour#defining variable pay that calculate payable amount
return pay#return pay value
hour_rate=float(input("Enter your hour rate $: "))#defining variable hour_rate that accepts rate vlue
hour=int(input("Enter total hours: "))#defining hour variable that accepts hour value
print('The total amount you will get $: ',weeklypay(hour_rate,hour))#call method and print return value
Output:
Enter your hour rate $: 300
Enter total hours: 3
The total amount you will get $: 900.0
Explanation:
In the above-given code, a method "weeklypay" is declared, which holds two value "hour_rate and hour" in its parameter, inside a method a "pay" variable is declared, that calculate the total payable amount of the given inputs and return its value.
In the next step, the above variable is used to input the value from the user-end and uses the print method to call the "weeklypay" method and print its return value.
Compare and contrast between flowcharts that involve:
-simple logic flow and
-simple logic flow with a two way branch
Answer:
The answer to this question is given below in the explanation section.
Explanation:
The solution to this question is given in the attached word file.
Suppose one machine, A, executes a program with an average CPI of 1.9. Suppose another machine, B (with the same instruction set and an enhanced compiler), executes the same program with 20% less instructions and with a CPI of 1.1 at 800MHz. In order for the two machines to have the same performance, what does the clock rate of the first machine need to be
Answer:
the clock rate of the first machine need to be 1.7 GHz
Explanation:
Given:
CPI of A = 1.9
CPI of B = 1.1
machine, B executes the same program with 20% less instructions and with a CPI of 1.1 at 800MHz
To find:
In order for the two machines to have the same performance, what does the clock rate of the first machine need to be
Solution:
CPU execution time = Instruction Count * Cycles per Instruction/ clock rate
CPU execution time = (IC * CPI) / clock rate
(IC * CPI) (A) / clock rate(A) = (IC * CPI)B / clock rate(B)
(IC * 1.9) (A) / clock rate(A) = (IC * (1.1 * (1.0 - 0.20)))(B) / 800 * 10⁶ (B)
Notice that 0.20 is basically from 20% less instructions
(IC * 1.9) / clock rate = (IC * (1.1 * (1.0 - 0.20))) / 800 * 10⁶
(IC * 1.9) / clock rate = (IC*(1.1 * ( 0.8))/800 * 10⁶
(IC * 1.9) / clock rate = (IC * 0.88) / 800 * 10⁶
clock rate (A) = (IC * 1.9) / (IC * 0.88) / 800 * 10⁶
clock rate (A) = (IC * 1.9) (800 * 10⁶) / (IC * 0.88)
clock rate (A) = 1.9(800)(1000000) / 0.88
clock rate (A) = (1.9)(800000000) / 0.88
clock rate (A) = 1520000000 / 0.88
clock rate (A) = 1727272727.272727
clock rate (A) = 1.7 GHz
(1) Prompt the user to enter a string of their choosing. Output the string.
Ex: Enter a sentence or phrase: The only thing we have to fear is fear itself. You entered: The only thing we have to fear is fear itself.
(2) Complete the GetNumOfCharacters() function, which returns the number of characters in the user's string. Use a for loop in this function for practice. (2 pts)
(3) In main(), call the GetNumOfCharacters() function and then output the returned result. (1 pt) (4) Implement the OutputWithoutWhitespace() function. OutputWithoutWhitespace() outputs the string's characters except for whitespace (spaces, tabs). Note: A tab is '\t'. Call the OutputWithoutWhitespace() function in main(). (2 pts)
Ex: Enter a sentence or phrase: The only thing we have to fear is fear itself. You entered: The only thing we have to fear is fear itself. Number of characters: 46 String with no whitespace: The only thing we have to fear is fear itself.
Answer:
See solution below
See comments for explanations
Explanation:
import java.util.*;
class Main {
public static void main(String[] args) {
//PrompT the User to enter a String
System.out.println("Enter a sentence or phrase: ");
//Receiving the string entered with the Scanner Object
Scanner input = new Scanner (System.in);
String string_input = input.nextLine();
//Print out string entered by user
System.out.println("You entered: "+string_input);
//Call the first method (GetNumOfCharacters)
System.out.println("Number of characters: "+ GetNumOfCharacters(string_input));
//Call the second method (OutputWithoutWhitespace)
System.out.println("String with no whitespace: "+OutputWithoutWhitespace(string_input));
}
//Create the method GetNumOfCharacters
public static int GetNumOfCharacters (String word) {
//Variable to hold number of characters
int noOfCharactersCount = 0;
//Use a for loop to iterate the entire string
for(int i = 0; i< word.length(); i++){
//Increase th number of characters each time
noOfCharactersCount++;
}
return noOfCharactersCount;
}
//Creating the OutputWithoutWhitespace() method
//This method will remove all tabs and spaces from the original string
public static String OutputWithoutWhitespace(String word){
//Use the replaceAll all method of strings to replace all whitespaces
String stringWithoutWhiteSpace = word.replaceAll(" ","");
return stringWithoutWhiteSpace;
}
}
What is the Intranet?
Answer:
a local or restricted communications network, especially a private network created using World Wide Web software.
Explanation:
the intranet is in private Network based on internet standards but only available within a business or other organization.
Write a program that reads in 15 numbers in sorted order from the user (i.e. the user enters them in order) and stores them in a 1D array of size 15. Next, prompt the user for a number to search for in the array (i.e. the "target"). Then, print the array. Next, search the array using a linear search – printing out each of
Corrected Question
Write a program that reads in 15 numbers in sorted order from the user (i.e. the user enters them in order) and stores them in a 1D array of size 15. Next, prompt the user for a number to search for in the array (i.e. the "target"). Then, print the array. Next, search the array using a linear search – find the target element and printing out the target and its index as well as the entire array
Answer:
The solution is given in the explanation section
See detailed explanation of each step given as comments
Explanation:
import java.util.*;
class Main {
public static void main(String[] args) {
//Create the array of 15 elements
int [] array = new int [15];
//Create an object of the scanner class to receive user input
Scanner in = new Scanner(System.in);
//Prompt user to enter the values in sorted order
//Using a for loop
for (int i =0; i<array.length; i++){
System.out.println("Enter the next element: In SORTED order please!");
array[i] = in.nextInt();
}
System.out.println("All Fifteen element have been entered");
// Ask the user for an element to be searched for
//A target element
System.out.println("Which element do you want to search for in the array");
//Create the target element
int target = in.nextInt();
//Use a for loop to sequentially check each element in the array
for(int i = 0; i<array.length; i++){
if(array[i]==target){
System.out.println(target+" is found at index "+i +" of the array");
}
}
// Printout the entire array
System.out.println(Arrays.toString(array));
}
}
Convert the following C program to C++.
More instructions follow the code.
#include
#include
#define SIZE 5
int main(int argc, char *argv[]) {
int numerator = 25;
int denominator = 10;
int i = 0;
/*
You can assume the files opened correctly and the
correct number of of command-line arguments were
entered.
*/
FILE * inPut = fopen(argv[1], "r");
FILE * outPut = fopen(argv[2], "w");
float result = (float)numerator/denominator;
fprintf(outPut,"Result is %.2f\n", result);
float arr[SIZE];
for( ; i < SIZE; i++) {
fscanf(inPut, "%f", &arr[i]);
fprintf(outPut, "%7.4f\n", arr[i]);
}
return 0;
}
Notice this is uses command-line arguments. I have provided an input file called num.txt that will be used when running the program. The output file is called out.txt.
Make sure you are using C++ style file I/O (FILE pointers/fopen) as well as regular I/O including the C++ style output formatting (fscanf, fprintf, formatting). Also use the C++ method of casting. The lines above that are bold are the lines that you need to convert to C++. Don't forget to add the necessary C++ statements that precede the main() function.
Answer:
The program equivalent in C++ is:
#include <cstdio>
#include <cstdlib>
#define SIZE 5
using namespace std;
int main(int argc, char *argv[]) {
int numerator = 25;
int denominator = 10;
FILE * inPut = fopen(argv[1], "r");
FILE * outPut = fopen(argv[2], "w");
float result = (float)numerator/denominator;
fprintf(outPut,"Result is %.2f\n", result);
float arr[SIZE];
for(int i = 0; i < SIZE; i++) {
fscanf(inPut, "%f", &arr[i]);
fprintf(outPut, "%7.4f\n", arr[i]);
}
return 0;
}
Explanation:
See attachment for explanation.
Each line were numbered with equivalent line number in the C program
Please help, I have no clue how to do this. It’s a question from my fundamentals of computing class
Answer:
110101 = 53
Hope this helps :)
To help us solve this problem, I've created a simple python program.
print(int("110101", 2))
The program prints 53 to the console.
If you search python ide online and paste that code into the ide and then replace the binary in between the quotes, you can find the value of any binary number you want.
Write a program that reads in 10 numbers from the user and stores them in a 1D array of size 10. Then, write BubbleSort to sort that array – continuously pushing the largest elements to the right side
Answer:
The solution is provided in the explanation section.
Detailed explanation is provided using comments within the code
Explanation:
import java.util.*;
public class Main {
//The Bubble sort method
public static void bb_Sort(int[] arr) {
int n = 10; //Length of array
int temp = 0; // create a temporal variable
for(int i=0; i < n; i++){
for(int j=1; j < (n-i); j++){
if(arr[j-1] > arr[j]){
// The bubble sort algorithm swaps elements
temp = arr[j-1];
arr[j-1] = arr[j];
arr[j] = temp;
}
}
}
}
public static void main(String[] args) {
//declaring the array of integers
int [] array = new int[10];
//Prompt user to add elements into the array
Scanner in = new Scanner(System.in);
//Use for loop to receive all 10 elements
for(int i = 0; i<array.length; i++){
System.out.println("Enter the next array Element");
array[i] = in.nextInt();
}
//Print the array elements before bubble sort
System.out.println("The Array before bubble sort");
System.out.println(Arrays.toString(array));
//Call bubble sort method
bb_Sort(array);
System.out.println("Array After Bubble Sort");
System.out.println(Arrays.toString(array));
}
}
What is the missing line of code? >>> sentence = "Programming is fun!" 'gr O sentence[2:6] sentence[3:5] sentence[3:6] sentence[2:5]
Answer: not sentence [3:6]
I hope this helps
Explanation:
How can a LAN be changed into a WAN?
Answer:
I hope the above picture may help you.
The code below is supposed to display the name and score for the student with the highest score one time before the program ends. It is displaying Jim as the student with the highest score. It is displaying the highest score of 95. Unfortunately, Jim does not have a score of 95. Correct the following code:
Declare String students[SIZES] = {"Jen", "Jon", "Jan", "Joe", "Jim"}
Declare Integer scores[SIZES] = 70, 85, 72, 95, 90
Declare Integer index Declare Integer highest = scores[0]
Declare Integer highest Name = " " For index = 0
To SIZES //Assume that this translates to For (index = 0; index <= SIZES, index ++)
If scores[index] > highest then highest = scores[index]
End Of highestName = students[index]
End For Display "
The name of the student with the highest score is ", highest Name Display "The highest score is ", highest
Answer:
Modify
If scores[index] > highest then highest = scores[index]
End Of highest
Name = students[index]
End For Display
to
If scores[index] > highest then highest = scores[index]
Name = students[index]
End Of highest
End For Display
Explanation:
In the code, you posted the code segment that gets the name of the student with the highest score is outside the if condition that determines the highest.
To make correction, we only need to bring this code segment into the loop.
See Answer
The government of a country wants to know how much inbound tourism (number of tourists visiting from other countries) is contributing to the country’s economic prosperity. The research firm hired to conduct this study surveys 10,000 residents on their favorite spots to visit in the country and how much money they spend on leisurely activities
a. How could the use of a sample like this threaten the value of the study’s outcomes?
b. How might the flawed sample affect the usefulness of the results?
Answer and Explanation:
A. The study by the research team may not reflect the purpose of the research which is to know how much inbound tourism is contributing to the economy. They are sampling the population on their favorite spots to visit( which may be too narrow here) and what their leisure activities are (which are not the only things tourists spend on). Also 10000 residents may be too small as a sample to reflect more accurate study outcome representative of the population.
2. A flawed sample which is a sampling error would not represent the population as the results from sample would contradict population results
Plz answer me will mark as brainliest
Answer:
7. true
8.B
Hopefully those are correct!
Explanation:
Concept maps should contain as much information about a subject as you can remember.
T
or
F
Answer:
True Just took the test
Explanation:
Answer:
the answer is T or TRUE
Explanation:
Remove gray from RGB Summary: Given integer values for red, green, and blue, subtract the gray from each value. Computers represent color by combining the sub-colors red, green, and blue (rgb). Each sub-color's value can range from 0 to 255. Thus (255, 0, 0) is bright red, (130, 0, 130) is a medium purple, (0, 0, 0) is black, (255, 255, 255) is white, and (40, 40, 40) is a dark gray. (130, 50, 130) is a faded purple, due to the (50, 50, 50) gray part. (In other words, equal amounts of red, green, blue yield gray). Given values for red, green, and blue, remove the gray part.
Answer:
Here is the C++ program:
#include <iostream> //to use input output functions
using namespace std; //to identify objects cin cout
int main() { //start of main method
int red,green,blue,smallest; //declare variables to store integer values of red,green, blue and to store the smallest value
cout<<"Enter value for red: "; //prompts user to enter value for red
cin>>red; //reads value for red from user
cout<<"Enter value for green: "; //prompts user to enter value for green
cin>>green; //reads value for green from user
cout<<"Enter value for blue: "; //prompts user to enter value for blue
cin>>blue; //reads value for blue from user
//computes the smallest value
if(red<green && red<blue) //if red value is less than green and blue values
smallest=red; //red is the smallest so assign value of red to smallest
else if(green<blue) //if green value is less than blue value
smallest=green; //green is the smallest so assign value of green to smallest
else //this means blue is the smallest
smallest=blue; //assign value of blue to smallest
//removes gray part by subtracting smallest from rgb
red=red-smallest; //subtract smallest from red
green=green-smallest; //subtract smallest from green
blue=blue-smallest; //subtract smallest from blue
cout<<"red after removing gray part: "<<red<<endl; //displays amount of red after removing gray
cout<<"green after removing gray part: "<<green<<endl; //displays amount of green after removing gray
cout<<"blue after removing gray part: "<<blue<<endl; } //displays amount of blue after removing gray
Explanation:
I will explain the program using an example.
Lets say user enter 130 as value for red, 50 for green and 130 for blue. So
red = 130
green = 50
blue = 130
First if condition if(red<green && red<blue) checks if value of red is less than green and blue. Since red=130 so this condition evaluate to false and the program moves to the else if part else if(green<blue) which checks if green is less than blue. This condition evaluates to true as green=50 and blue = 130 so green is less than blue. Hence the body of this else if executes which has the statement: smallest=green; so the smallest it set to green value.
smallest = 50
Now the statement: red=red-smallest; becomes:
red = 130 - 50
red = 80
the statement: green=green-smallest; becomes:
green = 50 - 50
green = 0
the statement: blue=blue-smallest; becomes:
blue = 130 - 50
blue = 80
So the output of the entire program is:
red after removing gray part: 80 green after removing gray part: 0 blue after removing gray part: 80
The screenshot of the program along with its output is attached.
My computer keeps shutting down I've tried to completely wipe the memory but it didn't work do you have any ideas how to fix it or what's happening?
Answer:
You could have a bug, virus, or you might have been hacked the most I can tell you is try to contact a technician to check it and try to help you. It could also be a problem with your internet, maybe you hit your computer against something and it broke something inside, or it could be a technical glitch. I hop this helps! Good Luck fixing your computer!
WILL GIVE BRAINLYIEST 3pts) Make a prediction about which material will be the best insulator and conductor of heat. Materials: aluminum, glass, fiber glass, air between glass, and brick:
a. I think the _____________ will conduct heat better.
b. I think the _____________ will insulate heat better.
Answer:
a. I think the Aluminum will conduct heat better.
b. I think the Fiberglass will insulate heat better.
Fiberglass is used to insulate most everyday items, so I can be sure that fiberglass can be the best insulator, as for aluminum it conducts heat like you wouldn't believe.
Note: Your answer doesn't have to be right, they just want you to make a prediction about your answer, that means it's alright to guess, also know I didn't guess I am just telling you that you didn't have to ask this question. <3
what is a conditional format that displays a horizontal gradient or solid fill indicating the cell's relitive value compared to other selected cells
Answer:
Data bar
Explanation:
The answer to this question is data bar. Through the use of a day bar we are able to see trends in our data. They are very useful when it comes to visualization of values that are In a range of cells. Now if the bar is longer then the value we are visualizing is definitely higher. And if it is shorterr the value is lower. Several applications like excel has programmes that makes use of data bars especially for statistical purposes.
Create a C++ console application to store points for contestants in a contest. Ask the user for the number of contestants. Create two parallel dynamic arrays, one to store the names and one to store integer scores from zero to 100. Do not accept out of range numbers. Ask the user for each name and the score one at a time.
When you encounter the end of the array, print all names and scores. Also, print the average and indicate whether each score is above or below average. The example is attached in the file and I want you to get the same output on the shown display of the program.
Requirements:
1 Add comments as you code. Do NOT wait until you are done coding. Also, in the beginning of your codes include the following comments:
Purpose of the program,
Name of the author, and
Date
2 Tell the user what the program is all about.
3 Create a function to get the values from the user and store them in the arrays. Pass the pointers and array size to the function. This function will have a void return type.
4 Create a function to calculate the average. Pass a pointer and the size to the array. The function should return the average.
5 Create another function to print the result. Pass the pointers, the array size, and the average to the function.
6 Do not pass arrays to functions. Even though it is possible to do so, we are trying to practice using pointers.
7 All functions will be called only by the main. Prevent calling them by other functions.
8 No global variables are allowed.
9 Delete the arrays to free the memory after printing the results.
10 Ask the user if they want to continue. If so, ask the questions again.
11 Test, test, and test.
Hints:
Please, do NOT use 'break' or 'continue' in the code.
This is how you create a dynamic array: arrayPtr = new int[size];
Use this syntax to pass the pointer to a function: void display (string* namePtr){ }
Answer:
Open your python console and execute the following .py code
Explanation:
Code bellow:
#include <iostream>
#include <iomanip>
#include <string>
using namespace std;
void inputInfo(string*, int*, int);
double mathAvr(int*, int);
void printInfo(string*, int*, int, double);
int main()
{
double avg;
int n;
string *names;
int *scores;
char ch;
do
{
cout << "\n contestants quantity: ";
cin >> n;
names = new string[n];
scores = new int[n];
inputInfo(names, scores, n);
avg = mathAvr(scores, n);
printInfo(names, scores, n, avg);
delete [] names;
delete [] scores;
cout << "\n again? (Y/N): ";
cin >> ch;
}while(ch=='Y' || ch=='y');
cout << "\n\n";
return 0;
}
void inputInfo(string *names, int *scores, int n)
{
int i;
for(i=0; i<n; i++)
{
cout << "\n\n Name of the participant: ";
cin >> *(names+i);
do
{
cout << "\n score " << *(names+i) << " (0-100): ";
cin >> *(scores+i);
}while(*(scores+i) < 0 || *(scores+i) > 100);
}
}
double mathAvr(int *scores, int n)
{
int i, sum=0;
double avg;
for(i=0; i<n; i++)
{
sum += *(scores+i);
}
avg = sum / (double)n;
return avg;
}
void printInfo(string *names, int *scores, int n, double avg)
{
int i;
cout << "\n\n " << left << setw(20) << "Participant name" << left << setw(6) << "Score" << " \n";
for(i=0; i<n; i++)
{
cout << "\n " << left << setw(20) << *(names+i) << left << setw(6) << *(scores+i);
}
cout << fixed << setprecision(2);
cout << "\n\n Average: " << avg << " \n\n";
}
Complete the sentence.
You can buy new applications at a retail store on DVD for ____.
O laptops
O smartphones
O tablets
Answer:
laptops
Explanation:
B
You can buy new applications at a retail store on DVD for laptops. Thus, option A (laptops) is correct.
What is a DVD?A website is an accumulation of internet pages and related items that is posted on at least one server and given an unique domain name. Most blogs focus on a single subject or objective, such as reporting, education, industry, entertaining, or photo sharing.
A raster-based photograph designed for the web and publishing is stored as a JPG file. The JPG format is the default file format for image sensors and is the most widely used picture format on the web because of its universal compatibility and decompression. Portraits in both colour and black and white work brilliantly with them.
Therefore, option A (laptops) is the correct option.
Learn more about DVD, here:
https://brainly.com/question/13664390
#SPJ6
Which function is used to display a string value to the screen?
main[]
print()
run=
SHOW!
Answer:
The correct answer to this question is given below in the explanation section.
Explanation:
in most programming languages, the print() function is used to display a string value to the screen. Because, the print function prints all the string given in it as a parameter.
for example: to print hello world.
we use the function to print hello world as print("hello world").
However, it noted that other options are not correct because the main() function is an entry point of a program and it does not print string value to the screen. while run and show function do not print string value of screen also.
Answer:
in python print()
A ______________ is a way of taking a screenshot or a picture of your computer screen.
Answer:
prt scan+Windows logo
Which of the following tabs in the PowerPoint Ribbon is unique to PowerPoint,
not found in other Microsoft Office applications?
a.
b.
Home
Animations
Insert
View
Answer:
The answer to this question is given below in the explanation section
Explanation:
The correct option for this question is Animation tab.
Animation tab in PowerPoint ribbon is a unique tab that is not found in other office applications such as in word, excel, outlook, publisher etc.
Because in PowerPoint you can use animation to make your slides animated and all animation can be managed and animation-related settings, you can find in the animation tab.
However, other tabs such as Home, Insert, and View are common in all office applications.
Write a loop to print 56 to 70 inclusive (this means it should include both the 56 and 70). The output should all be written out on the same line.
Sample run:
56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
In python:
for i in range(56, 71):
print(i, end=" ")
Answer:
for n in range(56,71):
print(n, end=" ")
Explanation:
Adjust list by normalizing When analyzing data sets, such as data for human heights or for human weights, a common step is to adjust the data. This can be done by normalizing to values between 0 and 1, or throwing away outliers. For this program, adjust the values by subtracting the smallest value from all the values. The input begins with an integer indicating the number of integers that follow. Assume that the list will always contain fewer than 20 integers. Ex: If the input is: 5 30 50 10 70 65 the output is: 20 40 0 60 55 The 5 indicates that there are five values in the list, namely 30, 50, 10, 70, and 65. 10 is the smallest value in the list, so is subtracted from each value in the list. For coding simplicity, follow every output value by a space, including the last one.
Answer:
I've implemented this program using python
userinput = int(input("Length: "))
mylist = []
mylist.append(userinput)
for i in range(1,userinput+1):
userinp = int(input("Input: "))
mylist.append(userinp)
smallval = mylist[1]
for i in range(1,len(mylist)):
if smallval > mylist[i]:
smallval = mylist[i]
for i in range(1,len(mylist)):
mylist[i] = mylist[i] - smallval
for i in range(1,len(mylist)):
print(mylist[i],end=' ')
Explanation:
I've added the full source program as an attachment where I used comments to explain difficult lines
The program written in python 3 deducts the least from a list of user given integers and prints the output. The program goes thus :
len_input = int(input())
#the number of inputs the user wishes to supply
vals = []
#initialize an empty list to accept the inputs
for i in range(1, len_input +1):
#use a loop to accept the user inputs
num = int(input())
#allow users to take in the inputs
vals.append(num)
#append each value to the list
least =min(vals)
#using the min function, obtain the lowest value from the list
output_vals = []
#initialize an empty list to hold the normalized values
for i in range(len_input):
#loop using a for loop
diff = vals[i] - least
#deduct the minimum value from each element in the list
output_vals.append(diff)
#append the values to the new list.
print(output_vals)
#display the output
A sample run of the program and the script is attached.
Learn more :https://brainly.com/question/14276852
Which of the following behaviors is considered ethical?
copying another user’s password without permission
hacking software to test and improve its efficiency
using a limited access public computer to watch movies
deleting other user’s files from a public computer
Answer:
using a limited access public computer to watch movies
Explanation:
Cause it doesn't involve you performing any illegal actions.
Answer:
C. using a limited access public computer to watch movies
Explanation:
IM A DIFFERENT BREEED!!
PLUS NOTHING ELSE MAKES SENSE LOL!
-Roll 2 standard dice
-If the sum of the dice are greater than 8, print “The sum of the dice is ____”
- print “done” at the end of the code
In python:
import random
die1 = random.randint(1,6)
die2 = random.randint(1,6)
if die1 + die2 > 8:
print(f"The sum of the dice is {die1 + die2}")
print("done")
If you need me to change anything, I will. I hope this helps!
How many components does a network have ?
Answer:
There are three primary components to understanding networks: 1. Physical Connections; 2. Network Operating System; and 3. Application Component. Hope this helps!
Explanation:
In 2-5 paragraphs, describe how technology helps business professionals to be more efficient.
The ways that technology helps business professionals to be more efficient is that Business professionals may stay more organized, communicate more effectively, and keep firms secure with the use of technology.
Technology makes it simpler to connect with employees by utilizing e-mail and memos, and it helps keep employee information and corporate paperwork a lot more organized using computers and software.
How does technology improve the productivity of business people?By streamlining time-consuming procedures, technology also increases office productivity. For instance, using document management software eliminates the need for manual data entry, filing, as well as in file retrieval.
Therefore, one can say that Technology can be used to safeguard private executive decisions, financial data, and other forms of proprietary information that gives a company a competitive edge. Simply simply, technology aids firms in protecting their ideas from rivals.
Learn more about technology from
https://brainly.com/question/1162014
#SPJ1