Answer:
Percent yield = 17%
Explanation:
Given data:
Actual yield of lithium chloride = 6.0 g
Theoretical yield of lithium chloride = 35.4 g
Percent yield = ?
Solution:
Formula:
Percent yield = (actual yield / theoretical yield )× 100
Now we will put the values in formula.
Percent yield = (6.0 g/ 35.4 g)× 100
Percent yield = 0.17 × 100
Percent yield = 17%
If a fluorine atom and nitrogen atom combine to form a compound, what type of bond will they form
Answer:
I guess covalent bond is formed
A rigid 3.80 L sealed vessel contains 0.650 mol Ne, 0.321 mol Kr, and 0.190 mol Xe. Find the density of the mixture in g/L.
Answer:
17.09g/L
Explanation:
Density = total mass of elements/ volume
We need to find the mass of each mixture constituents using their molar mass:
mole = mass/molar mass
For Neon (Ne) which contains 0.650mol;
0.650 = mass/20.18
mass = 0.650 × 20.18
mass = 13.12g
For Krypton (Kr) which contains 0.321mol;
0.321 = mass/83.79
mass = 0.321 × 83.79
mass = 26.89g
For Xenon (Xe) which contains 0.190mol;
0.190 = mass/131.3
mass = 0.190 × 131.3
mass = 24.95g
Total mass = 13.12g + 26.89g + 24.95g = 64.96g
Density = total mass / volume
Density = 64.96g / 3.80L
Density of the mixture = 17.09g/L
3
Which chemical equation below is balanced to correctly represent the Law of
Conservation of Mass?
04 Al + 3O2 + 2 Al2O3
O2 AL + O2 + 2 Al2O3
O AL + O2 + Al2O3
Answer:
4Al + 3O₂ → 2Al₂O₃
Explanation:
4Al + 3O₂ → 2Al₂O₃
Only this reaction above obeys the law of conservation of mass. The others flout the rule.
The law of conservation of mass states that "matter is neither created nor destroyed in a chemical reaction but are simply transformed from one form to another".
By this law, the number of atoms on both sides of expression must be the same;
Number of atoms
Elements Left hand side Right hand side
Al 4 4
O 6 6
the cell cycle describes the processes that take place as a cell?
What does this passage explain about people?
why mothers favor some children over others
the contrasting sides of human nature
why there is harmony in all things
left- and right-handedness
Answer:
the contrasting sides of human nature
Explanation:
I took the test
A flask containing 100 g of water is heated, and the temperature of the water increases from 21°C to 90°C. How much heat did the water absorb if the
specific heat capacity of water is 4.184 J/gºC?
A. 289 J
B. 418.4 J
C. 28,870 J
D. 10,000 J
Answer:
28869.6J
Explanation:
Given parameters:
Mass of water in flask = 100g
Initial temperature = 21°C
Final temperature = 90°C
Specific heat capacity = 4.184J/g°C
Unknown:
Amount of heat the water absorbed = ?
Solution:
The amount f heat the water absorbed can be determined using the expression below:
H = m x C x Δt
m is the mass
C is the specific heat capacity of water
Δt is the change in temperature
Now insert the parameters and solve;
H = 100 x 4.184 x (90 - 21) = 28869.6J
Answer:
So its c
Explanation:
Convert 85km/hr to cm/s(factor label conversion)
Answer:
23.61m/s
Explanation:
Km/hr is a unit of expressing the speed of a body. Speed is the rate of change of distance with time. Also, the same unit is applicable for expressing the velocity of a body. But to find the velocity, we must emphasize the direction of motion of the body.
Given parameter:
85km/hr to cm/s
Note:
1000m =1km
3600s = 1hr
So;
85 x
Cancelling out km and hr;
= 85 x 0.278m/s
= 23.61m/s
Which sentence best describes a bond formed between two unlike atoms?
Answer:B apez
Explanation:
Answer:
The type of bond is determined by the difference in elecronegtivity of the atom
Explanation:
A P E X
5. What is metallic bonding?
6. Why are metals shiny?
Answer:
Metallic bonding is found in metals and their alloys. When the atoms give up their valence electrons, they form ions. These ions are held together by the electron cloud surrounding them. Metals are shiny because they have a lot of free (i.e. delocalized) electrons that form a cloud of highly mobile negatively charged electrons on and beneath the smooth metal surface in the ideal case. ... In the absence of any external EM field, the charges in the plasma are uniformly distributed within the metal.
Explanation:
In metallic bonding, the electrons are “surrendered” to a common pool and become shared by all the atoms in the solid metal.
H20+ SO3 ? Which compound is likely produced by the chemical reaction?
Answer:
h2so4
Explanation:
im big brain.
A gas has a pressure of 645 Torr at 128 ºC. What is the temperature (ºC) of the pressure increases to 824 Torr at constant volume and moles?
Answer:
512 K
Explanation:
Initial pressure P1 = 645 Torr
Initial Temperature T1 = 128 ºC + 273 = 401 K (Upon converting to kelvin temperature)
Final Pressure P2 = 824 Torr
Final Temperature T2 = ?
The relationship between the variables is given as;
P1 / T1 = P2 / T2
Making T2 subject if formula we have;
T2 = P2T1 / P1
Inserting the values we have;
T2 = 824 * 401 / 645 = 512 K
calculate the (m/v) of nacl of a solution made by diluting 25.0 ml of a 7.50 (m/v)% NaCl solution to a total volume of 75.00 ml
Answer:
2.5%
Explanation:
Given
M1 = 7.50%
M2 = ?
V1 = 25.0mL
V2 = 75.00mL
M1V1=M2V2
7.5x25=M2x75
M2=2.5%
The NaCl of a solution made by diluting 25.0 ml of a 7.50 (m/v)% NaCl solution to a total volume of 75.00 ml is 2.5 (m/v)%.
What is solution?Solution is defined as a continuous variation of two or more substances in their relative proportions up to what is known as the limit of solubility. A solute is the name for the substance that dissolves to create a solution. A solvent is the material that a solute will dissolve in. Sugar is the solute and water is the solvent in a sugar-water solution.
To calculate the molarity of NaCl
We use M1V1 = M2V2
Given M1 = 7.50 (m/v)%
V1 = 25.0 ml
V2 = 75.0 ml
M2 = M1 V1 / V2
M2 = 7.50 x 25.0 / 75.0
M2 = 2.5 (m/v)%
Thus, the NaCl of a solution made by diluting 25.0 ml of a 7.50 (m/v)% NaCl solution to a total volume of 75.00 ml is 2.5 (m/v)%.
To learn more about solution, refer to the link below:
https://brainly.com/question/7932885
#SPJ2
How many milliliters of 6.2 M M HCl H C l solution are needed to obtain 0.18 mol m o l of HCl H C l ?
Answer:
29 mL HCl
General Formulas and Concepts:
Chem
Molarity = moles of solute / liters of solutionExplanation:
Step 1: Define
6.2 M HCl
0.18 mol HCl
x L mol HCl
Step 2: Define conversions
1 L = 1000 mL
Step 3: Find L
6.2 M HCl = 0.18 mol HCl / x L HCl
(x L HCl)(6.2 M HCl) = 0.18 mol HCl
x L HCl = 0.18 mol HCl / 6.2 M HCl
x = 0.029032 L HCl
Step 4: Convert
[tex]0.029032 \ L \ HCl(\frac{1000 \ mL \ HCl}{1 \ L \ HCl} )[/tex] = 29.0323 mL HCl
Step 5: Check
We are given 2 sig figs. Follow sig fig rules.
29.0323 mL HCl ≈ 29 mL HCl
Answer:
29 mL HCl
Explanation:
Submit Test
Question 10 of 12- POS
GR8 Sci U03 USA FY21 Question: 1-10
Hannah added a silvery white metal to a beaker of cold water and noticed that gas bubbles were given off and a different substance formed. When she repeated the activity with hot water she noticed the gas bubbles were
released much more rapidly. Which statement best explains why the reaction occurred faster in hot water?
M
The correct answer is Hot water increases the collision rate of molecules, causing the reaction to occur faster.
Explanation:
Temperature is directly related to the kinetic energy or movement of molecules in a substance. In this context, a higher temperature leads to more kinetic energy or more collision between molecules. At the same time, a chemical reaction involves molecules of two or more substances colliding and creating bonds to form new substances. This implies an increase in temperature means molecules colliding faster, new substances forming in a shorter time, and therefore a faster chemical reaction. According to this, the first answer is correct.
Explain why ionic compounds are formed when a metal bonds with a nonmetal, but covalent compounds are formed when two nonmetals bond
Answer:
Ionic bonds form when a nonmetal and a metal exchange electrons, while covalent bonds form when electrons are shared between two nonmetals. ... Atoms form covalent bonds in order to reach a more stable state. A given nonmetal atom can form a single, double, or triple bond with another nonmetal.
Ionic bonds form when a nonmetal and a metal exchange electrons, while covalent bonds form when electrons are shared between two nonmetals. ... Atoms form covalent bonds in order to reach a more stable state. A given nonmetal atom can form a single, double, or triple bond with another nonmetal.
how many atoms does sodium hypochlorite have?
Answer:
NaClO; the contained elements ae Na, Cl, O.
defferent between crysttiline solid and amerphus solid
Answer:
Crystalline solids have well-defined edges and faces, diffract x-rays, and tend to have sharp melting points. In contrast, amorphous solids have irregular or curved surfaces, do not give well-resolved x-ray diffraction patterns, and melt over a wide range of temperatures.
Explanation:
Hope this helped!
Answer:
Crystalline solids have well-defined edges and faces, diffract x-rays, and tend to have sharp melting points. In contrast, amorphous solids have irregular or curved surfaces, do not give well-resolved x-ray diffraction patterns, and melt over a wide range of temperatures.
Explanation:
What would be the mass, in grams, of 1.505 x 1023 molecules of carbon disulfide?
Answer:
19g
Explanation:
Given:
Number of molecules = 1.505 x 10²³molecules
Formula of compound = CS₂
Unknown:
Mass of the compound
Solution:
A mole of every substance contains 6.02 x 10²³molecules. Using this we can find the number of moles from number of molecules given;
6.02 x 10²³molecules makes up 1 mole of a substance
1.505 x 10²³molecules will contain [tex]\frac{1.505 x 10^{23} }{6.02 x 10^{23} }[/tex] = 0.25mole of CS₂
Mass of CS₂ = number of moles x molar mass
Molar mass of CS₂ = 12 + 2(32) = 76g/mol
Mass of CS₂ = 0.25 x 76 = 19g
From the combinations of substances listed below, which would most likely be miscible in
each other?
(33 Points)
A.polar water, nonpolar oil
B.polar vinegar, nonpolar nail polish
C. polar bleach, polar water
D.nonpolar mineral oil, polar alcohol
Answer:
C
Explanation:
polar has unequal sharing of electrons that has the lone pairs which has the electronegativity difference. can be mixed with water.
sulfur trioxide is used in many products from explosive to glue. which two criteria are most important in engineering a process to produce this compound?
Answer: The process should produce a high volume of product from the input reactants. The process must also be safe for people and the enviorment. - Ape x
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the process must also be safe for people and the environment.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.
The process should produce a high volume of product from the input reactants. The process must also be safe for people and the environment.
Therefore, the process must also be safe for people and the environment.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ5
Titration of a strong acid with a strong base. The pH curve for titration of 50.0 mL of a 0.100 M solution of hydrochloric acid with a 0.100 M solution of NaOH (aq). For clarity, water molecules have been omitted from the molecular art.
Required:
What volume of NaOH(aq) would be needed to reach the equivalence point if the concentration of the added base were 0.270 M?
The volume of NaOH that would be needed to reach the equivalence point is : 19 mL
Given data
volume of HCL = 50 mL = 0.05 L
conc of HCL = 0.100 M
volume of NaOH = ?
conc of NaOH = 0.100 M
Determine the volume of NaOH needed to reach equivalence pointNew conc of added base = 0.270 M
At equivalence ;
moles of OH⁻ ions = moles of H⁺ ions
0.05 * 0.1 = 0.27 * v
therefore the volume ( v ) = ( 0.05 * 0.1 ) / 0.27
= 0.019 L = 19 mL
Hence we can conclude that The volume of NaOH that would be needed to reach the equivalence point is : 19 mL .
Learn more about Titration : https://brainly.com/question/186765
A mixture of neon and xenon gases, at a total pressure of 739 mm Hg, contains 0.919 grams of neon and 19.1 grams of xenon. What is the partial pressure of each gas in the mixture?_______g Xe
Answer:
Partial pressure of neon = 175 mmHg
Partial pressure of xenon = 564 mmHg
Explanation:
The partial pressure of a gas in a mixture can be calculated as the product of the mole fraction of the gas (Xi) and the total pressure (Pt), as follows:
Pi = Xi Pt
The total pressure is 739 mmHg ⇒ Pt = 739 mmHg
In order to calculate the mole fraction of each gas, we have to first calculate the number of moles of each gas (n) by dividing the mass of the gas into the molar mass (MM):
For neon gas (Ne):
MM(Ne) = 20.18 g/mol
n(Ne)= mass/MM = 0.919 g x 1 mol/20.18 g = 0.045 mol Ne
For xenon gas (Xe):
MM(Xe) = 131.3 g/mol
n(Xe)= mass/MM = 19.1 g x 1 mol/131.3 g = 0.145 mol Xe
Now, we calculate the mole fraction (X) by dividing the number of moles of the gas into the total number of moles (nt):
nt= moles Ne + moles Xe = 0.045 mol + 0.145 mol = 0.190 mol
X(Ne) = moles Ne/nt = 0.045 mol/0.190 mol = 0.237
X(Xe) = moles Xe/nt = 0.145/0.190 mol = 0.763
Finally, we calculate the partial pressures of Ne and Xe as follows:
P(Ne) = X(Ne) x Pt = 0.237 x 739 mmHg = 175 mmHg
P(Xe) = X(Xe) x Pt = 0.763 x 739 mmHg = 564 mmHg
what is a formula car? (This is for my chemistry project)
Answer:
A formula car is a single seat, open cockpit, open wheel racing car with substantial front and rear wings and an engine positioned behind the driver intended to be used in competition.
how many neutrons are in neon which has 10 protons and 10 electrons?
Answer:
It has 10 neutrons
Explanation:
Calculate the number of iron atoms in a sample of iron(III) oxide . Be sure your answer has a unit symbol if necessary, and round it to significant digits.
Answer:
[tex]atoms\ Fe=6.03x10^{24}atoms[/tex]
Explanation:
Hello!
In this case, since the mass of iron (III) oxide is missing we use 80.0 g as found on similar problems. In such a way, since iron (III) molar mass is 159.70 g/mol, one mole of iron (III) oxide has two moles of iron (subscript) and one mole of atoms of iron have 6.022x10²³ atoms (Avogadro's number), the correct number of atoms in such sample is:
[tex]atoms \ Fe=80.0gFe_2O_3*\frac{1molFe_2O_3}{159.70gFe_2O_3}*\frac{2molFe}{1molFe_2O_3}*\frac{6.022x10^{23}atoms}{1molFe} \\\\atoms\ Fe=6.03x10^{24}atoms[/tex]
Which is shown with three significant figures as 80.0 g has three as well.
Best regards!
Which of the following set of properties is most likely for a liquid with large, attractive intermolecular forces?
Answer:
is it ok na I hope this answers are ok
Answer:
Answer is: C) high melting point and high boiling point.
Explanation:
HOPE IT HELPS
Your Welcome
Mark me Brianly!!!
5. To keep your lunch cold at the beach, would you want a material
that minimizes heat transfer or maximizes heat transfer? Explain (keep it short please)
Answer:
Minimizes heat transfer
Explanation:
To keep my lunch from getting cold at the beach, a material the minimizes heat transfer will be the most desirable.
Such material should be modified to prevent had transfer by convection, conduction and radiation. This kind of material is desirable because heat generally flows from a place of high amount to that of low amount. Since the food will mostly have a temperature higher than the ambient one, it is expected that heat will flow away from the food to the environment. This will make the food cold. If such heat transfer is prevented, then, the food will remain hot.Answer Question in box below Q: What is your evidence for why you think a Fan not spinning has energy or does not have energy-explain in detail?
Answer:
Yes, a fan not spinning has energy
Explanation:
Let us remember that energy is neither created nor destroyed but is transformed from one form to another. This is known as the principle of energy conservation. Hence energy in the universe never disappears!
The fan that is not spinning has potential energy. Potential energy is energy possessed by a body by virtue of its position. When the fan starts spinning, this potential energy is converted to kinetic energy.
You are given 3.0 grams of solid sodium to react to pure water which has a molarity of 55.6 M. How many milligrams of H2 can be produced if you react 6 mL of the water with 3.0 grams of solid sodium.
Na (s) + H2O ------> NaOH (aq) + H2 (g)
Answer:
= 15.51 mL
Explanation:
Here's is the reaction:
2HgO(s) ⇒ 2 Hg(s)+O₂(g)
In this reaction 2mol HgO = 1mol O₂
The molecular weight of HgO = 216.59g
so, 3.0g HgO = 3.0g x 1.00molHgO/216.59gHgO
= 0.0138511 molHgO
The amount of Oxygen follows:
0.0138511 molHgOx1/2= 0.00692555 mol O₂
Now, volume of 1 any gas = 22400mL
so, 0.00692555 mol O₂ x22400mLO₂/1mol O₂
= 15.513232mL O₂
How much heat is required to heat 1.8 kg of water from 8.4oC to 17.3oC? The heat capacity of water is 4.1813 J/g*oC
Answer:
Q = 66984.43 J
Explanation:
Given data:
Mass of water = 1.8 Kg (1.8Kg×1000 g/1 Kg =1800 g)
Initial temperature = 8.4°C
Final temperature = 17.3°C
Specific heat capacity of water = 4.1813 J/g.°C
Heat required = ?
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 17.3°C - 8.4°C
ΔT = 8.9°C
Q = 1800 g × 4.1813 J/g.°C ×8.9°C
Q = 66984.43 J