First two drop down menus choices:
1. treasury
2. ionic
3. matrimonial
4. covalent

Third drop down menu choices:
1. 40kJ/mol
2. 4000kJ/mol
3. 400kJ/mol
4. 40000kJ/mol

Answer:

CO₂

Explanation:

Please see attached picture for full solution.

* The masses of each atom can be found in the periodic table of elements

Answer:

because time is independent and distance is dependent . time goes on if distance is not there but if distance is covered it is covered in certain time . that's why distance is taken on y axis while displacement on x axis

Answer:

true fats; triglycerides

Explanation:

Answer:

The correct answer is: (E), Electron.

Explanation:

There are three types of subatomic particles - protons (P) have a positive charge, neutrons (N) have zero charge, and electrons (E) have a negative charge.

Hope this helps!

To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, electron is the subatomic particles that have a negative charge.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.

Therefore, electron is the subatomic particles that have a negative charge.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ2

Answer: 6,700

Explanation: took the test got it right :) (2020)

Answer:

B 6700

Explanation:

Answer:

6.24

Explanation:

The following data were obtained from the question:

Concentration of HA, [HA] = 0.280 M,

Concentration of H+, [H+] = 4×10¯⁴ M

Concentration of A-, [A−] = 4×10¯⁴ M

pKa =.?

Next, we shall write the balanced equation for the reaction. This is given below:

HA <===> H+ + A-

Next, we shall determine the equilibrium constant Ka for the reaction. This can be obtained as follow:

Equilibrium constant for a reaction is simply the ratio of concentration of the product raised to their coefficient to the concentration of the reactant raised to their coefficient.

The equilibrium constant for the above equation is given below:

Ka = [H+] [A−] /[HA]

Concentration of HA, [HA] = 0.280 M,

Concentration of H+, [H+] = 4×10¯⁴ M

Concentration of A-, [A−] = 4×10¯⁴ M

Equilibrium constant (Ka) =

Ka = (4×10¯⁴ × 4×10¯⁴) / 0.280

Ka = 1.6×10¯⁷/ 0.280

Ka = 5.71×10¯⁷

Therefore, the equilibrium constant for the reaction is 5.71×10¯⁷

Finally, we shall determine the pka for the reaction as follow:

Equilibrium constant, Ka = 5.71×10¯⁷

pKa =?

pKa = – Log Ka

pKa = – Log 5.71×10¯⁷

pKa = 6.24

Therefore, the pka for the reaction is 6.24.

Answer:

a. 7.52

b. 16.5

c. 85

d. 6.03

Explanation:

significant number exempts 0 as a number which explains the last one. The two significant numbers there are 6 and 3

Answer:

Explanation:

This question appears incomplete, however

The number of protons of an element/atom (atomic number) can be determined by checking for the position of the element on the periodic table. This is because elements are arranged according to there atomic number on the periodic table.

The number of electrons of any element (of a neutral atom) is equal to the number of protons of the same element.

The number of neutrons of an element/atom is determined by subtracting the atomic number of the element from it's mass number. Hence, mass number is the addition of the atomic number and the number of neutrons.

Ions are charged particles that have the same number of protons and neutrons as there parent atoms. Hence, they have different number of electrons when compared to there specific parent/neutral atom.

A negatively charged atom has more electrons than it's original atom. For example, fluoride ion (F⁻) has 10 electrons while fluorine atom has 9 electrons (meaning fluoride ion has one more electron than it's parent fluorine). The increase is dependent on the number "attached" to the charge. A positively charged atom has less electrons than it's original atom. For example, calcium ion (Ca²⁺) has 18 electrons while calcium atom has 20 electrons (meaning the calcium ion has 2 electrons less than it's parent calcium atom). As said earlier, the decrease here is also dependent on the number "attached" to the charge.

The rule used for the determination of the protons, electrons, and neutrons has been the equal number of protons and electrons, while the number of the neutrons has been the difference in the atomic mass and the protons.

The atom has been the smallest particle that has comprised of electrons, protons, and neutrons as the subatomic particle. The neutrons and protons in the atoms have consisted within the nucleus. The electrons in the atom are revolving around the nucleus.

The atoms have been consisted of an equal number of protons and electrons, while the number of neutrons has been the difference in the atomic mass and the protons.

The ions have been formed with the loss or gain of the electrons by the atom in the terms of valence electrons to complete its octet.

For more information about the electrons and protons, refer to the link:

https://brainly.com/question/803445

Answer:

C2H4O

Explanation:

The chemical molecular formula is C2H4O.

Also note*: Acetaldehyde is the chemical name for this structural formula.

Answer:

Explanation:

The name of the compound, C₅H₁₂, is pentane. It is a member of the alkane family hence it is saturated (no double or triple bond within it's carbon chain) and SP³ hybridized. It's three structural isomers are shown (drawn) in the attachment below. The three structural isomers are n-pentane, 2-methylbutane and 2,2-dimethylpropane.

In partition chromatography, the stationary phase is in a liquid state. ... The difference between adsorption and partition chromatography is a separation of molecules occur based on the adsorption ability in adsorption chromatography while separation occurs based on the partition in partition chromatography

Answer:

2.25×10¯³ mm.

Explanation:

From the question given above, we obtained the following information:

Diameter in micrometer = 2.25 μm

Diameter in millimetre (mm) =?

Next we shall convert 2.25 μm to metre (m). This can be obtained as follow:

1 μm = 1×10¯⁶ m

Therefore,

2.25 μm = 2.25 μm / 1 μm × 1×10¯⁶ m

2.25 μm = 2.25×10¯⁶ m

Finally, we shall convert 2.25×10¯⁶ m to millimetre (mm) as follow:

1 m = 1000 mm

Therefore,

2.25×10¯⁶ m = 2.25×10¯⁶ m /1 m × 1000 mm

2.25×10¯⁶ m = 2.25×10¯³ mm

Therefore, 2.25 μm is equivalent to 2.25×10¯³ mm.

Answer:

It helps identify trends and group elements with similar properties.

Explanation:

Arranging the elements according to the atomic mass wouldn't help us have groups and periods with predictable properties that we can have when arranging it according to atomic number. Don't forget that isotopes have different masses.

Answer:

Not only on the basis of atomic number its acctually on the basis of their electronic configuration, chemicals properties and physical properties.

Answer:

chemical action; chemical change; chemical process.

Explanation:

Answer: Chemical reaction

Answer:

This done such that when a reaction is in equilibrium and disturb by and external force which would prevent its completion its adjust so as to offset that external force and still go on to completion

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]Density = \frac{mass}{volume} [/tex]

From the question

mass of toy car = 29 g

Volume = New volume - original volume of water in cylinder

That's

volume = 19 - 3 = 16 mL

Substitute the values into the above formula and solve for the density

That's

[tex]Density = \frac{29}{16} \\ = 1.8125[/tex]

We have the final answer as

Density = 1.813 g/mL to the nearest thousandth

Hope this helps you

Answer:

1.813 g/mL

Explanation:

The density can be found with the following formula.

[tex]d= \frac{m}{v}[/tex]

where [tex]m[/tex] is the mass and [tex]v[/tex] is the volume.

We know the mass is 29 grams. We must find the volume.

The volume is equal to the volume of water that is displaced. Subtract the initial volume of water from the final volume.

⇒ final volume - initial volume of water

The initial volume of water is 3 mL and the final volume is 19 mL.

⇒ 19 mL - 3 mL

⇒ 16 mL

The volume of the toy car is 16 mL.

Now we know the mass and the volume.

[tex]m= 29g\\v=16mL[/tex]

Substitute the values into the formula.

[tex]d=\frac{m}{v}[/tex]

[tex]d=\frac{29g}{16mL}[/tex]

[tex]d=1.8125 g/mL[/tex]

Round to the nearest thousandth. The 5 in the ten thousandth place tells us to round the 2 to a 3.

[tex]d\approx1.813 g/mL[/tex]

The density of the toy car is about 1.813 grams per milliliter.

answer:

high temperatures

hydrogen gas

Answer:

C and D

Explanation:

just did this on edg :)

Answer:

The answer is

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

From the question

mass = 611 g

volume = final volume of water - initial volume of water

volume = 256.7 - 25.1 = 231.6 mL

The density of the metal is

[tex]density = \frac{611}{231.6} \\ = 2.638169257...[/tex]

We have the final answer as

Hope this helps you

Answer:

Density, [tex]\rho=0.49\ lb/in^3[/tex]

Explanation:

It is given that the density of liquid mercury is 13.6 g/mL. We need to convert the density into lb/in³.

We know that,

2.205 lbs= 1 kg

1 g = 0.0022 lb

1 mL = 0.0610 in³

[tex]13.6\ \dfrac{g}{mL}=13.6\times \dfrac{0.0022\ lb}{0.0610\ in^3}\\\\=0.49\ lb/in^3[/tex]

So, the density of liquid mercury is [tex]0.49\ lb/in^3[/tex].

Answer:

[tex]V_{average}=15.34L[/tex]

Explanation:

Hello,

In this case, given the volumes of pollutants:

Macon 0.519 L

Ogiala 44.67 L

Pitt 0.826 L

The average he ought report is computed by adding them and subsequently dividing by three since there are three pollutants as shown below:

[tex]V_{average}=\frac{0.519L+44.67L+0.826L}{3} \\\\V_{average}=15.34L[/tex]

Regards.

Answer:

The difference between physical change and chemical change is that chemical reaction is composition there is a change in the composition substances in question. In a physical change, there is a difference in the appearence, smell, or simple display of a sample matter

Explanation:

Answer:

sdipgjaeri0ae

Explanation:

Answer:

This question is incomplete without the table

Explanation:

The missing table is attached to this answer.

There are three subatomic particles found in an atom; protons, neutrons and electrons. The properties of the subatomic particles will be classified under the following subheadings (which are the empty columns/boxes in the attachment)

SYMBOL

The symbol of proton is "p⁺", the symbol of neutron is "n⁰" and the symbol of electron is "e⁻".

CHARGE

Looking at the symbol of the subatomic particles, one can guess the charge of each of the particles from the superscript.

Protons are positively charged, electrons are negatively charged while neutrons have no charge/electrically neutral.

The relative charge of proton is +1 while it's absolute charge is +1.60218 × 10⁻¹⁹

The charge of a proton was first determined by Ernest Rutherford using the gold-foil experiment

The relative charge of electron is -1 while it's absolute charge is -1.60218 × 10⁻¹⁹

The charge of an electron was first determined by R. Milikan using the oil-drop experiment

The relative charge and absolute charge of neutron is 0

The charge of a neutron was first determined by (or credited to) James Chadwick.

MASS

The relative mass (amu) of proton is 1.00727 while that of neutron is 1.00866. The relative mass (amu) of an electron is 0.00054858 while it's absolute mass (g) is 9.10939 × 10⁻²⁴.

The mass of an electron was first measured by J. J. Thomson.

The mass of a proton was first measured by (or credited to) Ernest Rutherford.

The mass of a neutron was first measured by James Chadwick.

LOCATION

The protons and neutrons are located inside the nucleus which is found in the centre of an atom while the electron(s) is/are found outside the nucleus but within the atom.

Answer:

theory

Explanation:

A theory has been tested and proven several times and oftentimes has a large amount of information, research, and evidence standing behind it.

Hope this helps! :)

Answer:

HF

Explanation:

This concept can be understood from the knowledge of Intermolecular forces of attraction.

Intermolecular bonds are Van der Waals forces which are weak forces of attraction joining non-polar and polar molecules together. They exist in the form of London Dispersion Forces and Dipole-dipole attraction.

An example of Dipole-dipole attraction is the hydrogen bond which is a unique dipole-dipole attraction between polar molecules in which a hydrogen atom is directly joined to a highly electronegative atom such as fluorine, oxygen, or nitrogen).

Molecules that possess the characteristics of hydrogen bonding have a higher boiling point. In the given question, only HF undergo hydrogen bond due to the electronegative effect of the fluorine element.

F2 occurs as a weak London dispersion force and it occurs between non-polar molecules.

Answer:

See explanation

Explanation:

COCl2 Contains two polar C- Cl bonds due to the electro negativity difference between carbon and chlorine.

There are 24 valence electrons in COCl2, the ideal bond angle is 120° based on the valence shell electron pair repulsion theory since the molecule trigonal planar. However, the double bond present compresses the bond angle to about 111°.

The dipoles in COCl2 do not cancel out hence the molecule is polar

The Lewis structure for COCl₂, including lone pairs is attached to the image below.

Carbon (C) has 4 valence electrons, oxygen (O) has 6 valence electrons, and chlorine (Cl) has 7 valence electrons.

In this structure, the oxygen atom is double-bonded to the carbon atom, and there is a single bond between the carbon atom and each chlorine atom. The oxygen atom has 2 lone pairs of electrons.

The molecular shape of COCl₂ is linear. The carbon atom is bonded to two chlorine atoms, and there are no lone pairs on the carbon atom. Therefore, the electron domain geometry is linear.

To learn more about Lewis structure, follow the link:

https://brainly.com/question/4144781

#SPJ6

Answer:

The answer is D. The Sun is the closest star to Earth and so it seems brighter than distant stars that have much greater absolute brightness.

Explanation: Stars like red super giants like beetleguise are way brighter and bigger than the sun, but the sun is closest to the earth. It is only in its main sequence stage but seems bright because of its short distance from the sun( 93 million miles).

There are billions of stars in the known universe, none of them seem to be as bright as the Sun beacuse the Sun is the closest star to Earth.

Stars are those astronomical bodies which are formed by the mixture of gases mainly of hydrogens and heliums, which are held by its own gravity.

In the universe or in the sky many stars are present which are luminous in appearance but among all of them only sun looks like more brighter, because the distance between the earth and the sun is not that much high as in between the other stars. That's why sun looks more brighter rather than other stars.

So, the Sun is the closest star to Earth and so it seems brighter than distant stars that have much greater absolute brightness.

To know more about sun, visit the below link:
https://brainly.com/question/15837114

Answer:

49.0g/mol is molar mass of X

Explanation:

551mg of X are dissolved in 100g of benzonitrile

Freezing point of solution: -13.4°C

The freezing point depression of a solution (Colligative property) follows the equation:

ΔT = Kf*m*i

Where ΔT is change in freezing point from the pure solvent (Benzonitrile: -12.8°C) to the solution (-13.4°C)

Kf is freezing point depression of benzonitrile: 5.34°C/m

m is molality of the solution (Moles X / kg of benzonitrile)

And i is Van't Hoff factor (1 for any solute in benzonitrile)

ΔT = -12.8°C - (-13.4°C) = 0.6°C

Solving for molality of the solution:

ΔT = Kf*m*i

0.6°C = 5.34°C/m*m*1

0.1124m = molality of the solution

Moles of X are:

0.1124mol/kg benzonitrile * 0.1kg benzonitrile = 0.01124 moles X

In 551mg = 0.551g:

Molar mass:

0.551g / 0.01124mol =

49.0g/mol is molar mass of X