For the function H(x)=-3x^2+12 state the domain

A value x with a z-score of 3.4 is an example of an outlier. An outlier is a data point that lies outside the overall pattern in a distribution.

A value that differs significantly from the other values in a data set is referred to as an outlier. In other words, outliers are values that deviate unusually from the mean.

Most of the time, outliers affect the mean but not the median or mode. As a result, the outliers' impact on the mean is crucial.

To find the outliers, there is no rule. However, if a value exceeds 1.5 times the value of the interquartile range outside of the quartiles, some books refer to it as an outlier.

In order to find the outliers, the data can also be plotted as a dot plot on a number line.

Visit here to learn more about  outlier : https://brainly.com/question/26958242
#SPJ11

Entonces, si el club de teatro vende todas las latas de limonada y botellas de agua, ¿cuánto dinero recaudará?

Si venden 360 latas de limonada a $2 cada una, recaudarán $720.

Si venden 360 botellas de agua a $1.50 cada una, recaudarán $540.

En total, recaudarán $720 + $540 = $1260.

Entonces, el club de teatro reunirá más de los $500 que necesitan para cubrir el costo del alquiler del vestuario.

Answer:

y = 3/4x - 14

Step-by-step explanation:

The equation is y = mx + b

m = the slope

b = y-intercept

m = 3/4

The Y-intercept is located at (0, -14)

So, the equation of the line is y = 3/4x - 14

These calculations, it appears that the sequence of partial sums is convergent, as the values of Sn appear to approach a limit as n increases.

To calculate the sequence of partial sums, we need to add up the first n terms of the series for each n up to 8. The nth term of the series is given by:

an = 2n / (n^5 + 1)

Therefore, the sequence of partial sums is:

S1 = 2/2 = 1

S2 = 2/2 + 3/26 = 1.5874

S3 = 2/2 + 3/26 + 4/641 = 1.3867

S4 = 2/2 + 3/26 + 4/641 + 5/15626 = 1.2600

S5 = 2/2 + 3/26 + 4/641 + 5/15626 + 6/390625 = 1.7000

S6 = 2/2 + 3/26 + 4/641 + 5/15626 + 6/390625 + 7/9765626 = 1.1006

S7 = 2/2 + 3/26 + 4/641 + 5/15626 + 6/390625 + 7/9765626 + 8/244140626 = 1.0455

S8 = 2/2 + 3/26 + 4/641 + 5/15626 + 6/390625 + 7/9765626 + 8/244140626 + 9/6103515626 = 1.0127

From these calculations, it appears that the sequence of partial sums is convergent, as the values of Sn appear to approach a limit as n increases.

To learn more about sequence  visit:

https://brainly.com/question/30262438

#SPJ11

The set of strings that satisfy the condition "l= ω∈0, 1* | ω has exactly one pair of consecutive zeros" can be constructed by considering all possible positions of the consecutive zeros and constructing the rest of the string accordingly.

The term "l= ω∈0, 1*" means that we are considering all strings (ω) made up of 0's and 1's of length "l" where "l" is unknown but can be any positive integer. The "|" symbol indicates a condition that must be satisfied by the string. In this case, we are looking for strings that have exactly one pair of consecutive zeros.

To find such strings, we can start by considering the possible positions of the consecutive zeros. They could appear in the first two positions, the last two positions, or somewhere in between.

If the consecutive zeros appear in the first two positions, then the rest of the string can be any combination of 0's and 1's. Similarly, if the consecutive zeros appear in the last two positions, then the rest of the string can also be any combination of 0's and 1's.

However, if the consecutive zeros appear somewhere in between, then the rest of the string must be carefully constructed to ensure that no additional pairs of consecutive zeros appear. For example, if the consecutive zeros appear in the third and fourth positions, then the rest of the string must contain only one more zero and the remaining digits must be 1's.

Therefore, the set of strings that satisfy the condition "l= ω∈0, 1* | ω has exactly one pair of consecutive zeros" can be constructed by considering all possible positions of the consecutive zeros and constructing the rest of the string accordingly.

To learn more about consecutive zeros here:

brainly.com/question/14962513#

#SPJ11

The maximum displacement current through the cross-sectional area is 1.77 A.

The maximum displacement current through a cross-sectional area can be found using the equation,

[tex]I =\ \in_0(d \phi_{E/dt} )[/tex]

where I is the displacement current, ε₀ is the electric constant [tex]8.85 \times 10^{-12} F/m[/tex], and [tex](d \phi_{E/dt} )[/tex] is the rate of change of the electric flux through the cross-sectional area.

The electric flux [tex]\phi_E[/tex] through a surface is given by:

[tex]\phi_E = \int E\times dA[/tex]

where E is the electric field and dA is the differential area vector.

For a uniform electric field perpendicular to the surface, the electric flux through the surface is simply:

[tex]\phi_E = E\times A[/tex]

where E is the magnitude of the electric field and A is the area of the surface.

In this case, the magnitude of the electric field is given by:

[tex]E = E_0\ Cos(\omega t)[/tex]

The maximum value of E is [tex]E_0 =20 V/m[/tex], which occurs when [tex]Cos(\omega t) =1[/tex]

The maximum electric flux through the cross-sectional area [tex]A = 0.60 m^2[/tex] is therefore:

[tex]\phi_E = E \times A = (20 V/m) \times (0.60 m^2) = 12 V[/tex]

To find the maximum displacement current, we need to differentiate the electric flux with respect to time:

[tex]d\phi_{E/dt} = -E_0\ \omega Sin(\omega t)[/tex]

The maximum value of sin(ωt) is 1, so the maximum value of [tex]d\phi_{E/dt}[/tex] is:

[tex]d\phi_{E/dt} = -E_0\ \omega Sin(\omega t) = -20V/m \times (1.0 \times 10^7 s^{-1}) \times 1 \\d\phi_{E/dt} = -2.0 \times 10^8 V/s[/tex]

Therefore, the maximum displacement current through the cross-sectional area is:

[tex]I =\ \in_0(d \phi_{E/dt} ) = (8.85 \times 10^{-12} F/m)\ \times (-2.0 \times 10^8 V/s) =-1.77A\\[/tex]

The negative sign indicates that the displacement current is flowing in the opposite direction to the electric field. However, the magnitude of the displacement current is always positive.

To know more about area, visit:

brainly.com/question/27683633

#SPJ1

The maximum displacement current through the cross-sectional area of this volume is approximately 1.06 milliamperes (mA), or 1.06 × 10⁻³A.

In mathematics, maximum displacement refers to the maximum deviation of a point or object from its equilibrium position, as it undergoes a displacement or vibration.

The maximum displacement current through a cross-sectional area A can be found using the equation:

I = ε₀ A (dE/dt)

where ε₀ is the permittivity of free space, A is the cross-sectional area, and dE/dt is the time rate of change of the electric field.

In this case, the electric field is given by E = E₀ cos(ωt), so we can find its time derivative as follows:

dE/dt = -E₀ω sin(ωt)

The maximum displacement current occurs when sin(ωt) is equal to 1, which corresponds to the maximum value of the time-varying electric field. At this point, the displacement current is:

I = ε₀ A (dE/dt) = ε₀ A (-E₀ω)

Substituting the given values, we get:

I = (8.85 × 10⁻¹²C²/Nm²)(0.60 m²)(-20 V/m)(1.0 × 10⁷ s⁻¹)

I ≈ -1.06 × 10⁻³ A

Note that the negative sign indicates that the displacement current is flowing in the opposite direction to the time-varying electric field.

To know more about cross-sectional area visit:

https://brainly.com/question/13029309

#SPJ1

The function f(x) that satisfies f ″(x) = [tex]2x + 7e^x[/tex] is given by: f(x) = [tex](1/3)x^3 + 7e^x + cx + d[/tex]

To find f given that f ″(x) = [tex]2x + 7e^x[/tex], we need to integrate the second derivative twice.

First, we integrate f ″(x) with respect to x to obtain f ′(x):

f ′(x) = ∫ f ″(x) dx = ∫[tex](2x + 7e^x) dx = x^2 + 7e^x + c[/tex]

where c is the constant of integration.

Next, we integrate f ′(x) with respect to x to obtain f(x):

f(x) = ∫ f ′(x) dx = ∫[tex](x^2 + 7e^x + c) dx = (1/3)x^3 + 7e^x + cx + d[/tex]

where d is the constant of integration.

Therefore, the function f(x) that satisfies f ″(x) = [tex]2x + 7e^x[/tex] is given by:

f(x) = [tex](1/3)x^3 + 7e^x + cx + d[/tex]

where c and d are constants that depend on the initial conditions of the problem.

In summary, to find f from the second derivative of f, we need to integrate twice and include two constants of integration, c and d. The resulting function f(x) will have the same second derivative as the given function, but the values of c and d will depend on the initial conditions.

To know more about second derivative refer here:

https://brainly.com/question/29090070

#SPJ11

-1/5n + 6/5, is not the correct formula for this sequence as it doesn't capture the alternating signs and the geometric nature of the sequence.

The pattern in the sequence is that each term is the previous term multiplied by -1/5. Therefore, we have:

a1 = 1
a2 = -1/5 * 1 = -1/5
a3 = -1/5 * (-1/5) = 1/25
a4 = -1/5 * (1/25) = -1/125

And so on. We can see that the denominator of each term is increasing by a factor of 5 each time, so the general formula for the nth term is:

an = (-1/5)^(n-1)

Now, if we substitute n = 1 into the formula you provided, we get:

an = -1/5(1) + 6/5 = 1

This is not equal to the first term in the sequence, which is 1. Therefore, your formula is not correct.
find the general term of the given sequence. The sequence you provided is:

\({1, -1/5, 1/25, -1/125, 1/625,...}\)

This sequence alternates between positive and negative terms and has a common ratio of -1/5. To find the general term, we can use the geometric sequence formula:

\(a_n = a_1 * r^{n-1}\)

where \(a_n\) is the general term, \(a_1\) is the first term, \(r\) is the common ratio, and \(n\) is the term number.

In this case, \(a_1 = 1\) and \(r = -1/5\). Plugging these values into the formula, we get:

\(a_n = 1 * (-1/5)^{n-1}\)

So, the formula for the general term of the sequence is:

\(a_n = (-1/5)^{n-1}\)

To learn more about denominator visit;

brainly.com/question/7067665

#SPJ11

Tthe integral of the joint PDF over its support is equal to 1, we have: ∫∫ fX,Y(x,y) dx dy = 1 2c = 1 c = 1/2 Therefore, the constant c is 1/2.

To find the constant c in the joint PDF of two random variables X and Y, given by fX,Y(x,y) = c, we need to use the property that the double integral of the joint PDF over the entire support equals 1. In this case, the support is defined by 0 ≤ x ≤ y ≤ 2.

Step 1: Set up the double integral
∫∫fX,Y(x,y) dx dy = 1

Step 2: Substitute fX,Y(x,y) with the given value
∫∫c dx dy = 1

Step 3: Determine the limits of integration
For x: 0 to y
For y: 0 to 2

Step 4: Solve the double integral
∫(from 0 to 2) ∫(from 0 to y) c dx dy = 1

Step 5: Integrate with respect to x
∫(from 0 to 2) [cx] (from 0 to y) dy = 1
∫(from 0 to 2) cy dy = 1

Step 6: Integrate with respect to y
[c/2 * y^2] (from 0 to 2) = 1
c(2^2)/2 - c(0^2)/2 = 1
c(4)/2 = 1

Step 7: Solve for c
c(2) = 1
c = 1/2

So, the constant c in the joint PDF fX,Y(x,y) = c is 1/2.

to learn more about random variables click here:

https://brainly.com/question/30386671

#SPJ11

The explicit formula for the nth term of the sequence 35, 44, 53, ... is given by [tex]a_n = 26 + 9n[/tex].

To find the explicit formula for the sequence 35, 44, 53, ..., we need to first determine the pattern or rule that generates each term of the sequence.

Notice that each term in the sequence is obtained by adding 9 to the previous term. Therefore, we can write the pattern as:

[tex]a_n = a_1 + (n-1)d[/tex]

Substituting the values into the formula, we get:

[tex]a_n = 35 + (n-1)9[/tex]

[tex]a_n = 26 + 9n[/tex]

Therefore, the explicit formula for the nth term of the sequence 35, 44, 53, ... is given by:[tex]a_n = 26 + 9n[/tex].

Learn more about explicit formulas here:

https://brainly.com/question/13877261

#SPJ1

Answer: 2

Step-by-step explanation:

hi

The degree of the polynomial is 3

Algebraic expressions are defined as expressions that are made up of terms, variables, constants, factors and coefficients.

These expressions are also made up of mathematical operations, such as;

Polynomials are algebraic expressions with a degree that is greater than Note that the height exponent is the same as the degrees.

From the information given, we have;

C+cd² +6d³

Degree = 3

Learn more about algebraic expressions at: https://brainly.com/question/4344214

#SPJ1

In an LRC circuit problem, the term "C" stands for capacitance (option b).

An LRC circuit consists of three primary components: an inductor (L), a resistor (R), and a capacitor (C). These components are connected in series, and the circuit allows the analysis of the behavior of electrical energy in the presence of these components.

The inductor (L) stores energy in the form of a magnetic field when current flows through it, while the resistor (R) dissipates energy in the form of heat as the current passes through it. The capacitor (C), on the other hand, stores energy in the form of an electric field as it holds a charge across its plates.

Capacitance is a measure of a capacitor's ability to store electrical energy per unit voltage. It is typically measured in farads (F). The capacitance of a capacitor is dependent on its physical properties, such as the surface area of its plates, the distance between the plates, and the dielectric material between the plates.

In an LRC circuit, the interplay of the inductor, resistor, and capacitor components creates a complex electrical behavior that depends on the circuit's characteristics and the applied voltage or current. The analysis of LRC circuits typically involves solving differential equations that describe the relationships between voltage, current, and the properties of the components.

In summary, the term "C" in an LRC circuit problem represents capacitance, which is a measure of a capacitor's ability to store electrical energy per unit voltage. The LRC circuit's behavior results from the combined action of the inductor, resistor, and capacitor components.

To know more about LRC circuit, refer here:

https://brainly.com/question/29045377

#SPJ11

The value of the quantity after 6 weeks is 7694.5

Percentage Increase is the difference between the final value and the initial value, expressed in the form of a percentage.

How to determine this

When an initial value = 5500

Grows at a rate of 0.95%

i.e 0.95% of 5500 = 52.25, it grows 52.25 per day

What is the value of the quantity after 6 weeks

When 7 days = 1 week

6 weeks = x

x = 6 * 7 days

x = 42 days

If it grows 52.25 per day

let x represent the value of quantity in 42 days

When 52.25 = 1 day

x = 42 days

x = 42 * 52.25

x = 2194.5

Therefore the value of the quantity after 6 weeks

= 2194.5 + 5500

= 7694.5

Read more about Percentage Increase

https://brainly.com/question/9993346

#SPJ1

There is a table and line plot which consists a group data of students with their measured the shoes lengths. The incorrect data point is equals to [tex]7 \frac{1}{2} [/tex] and it is Don's data point.

The line plot displays data frequencies along a number line. We have a data of a group of students measured the lengths of their shoes. The lengths are listed in the table. We have a line plot of data present in above figure. There is some incorrect on line plot and we have to determine it. See the table data and line plot data in above figure and determine students whose the wrong data is put on line plot. Now, All shoes length in inches,

Kat's shoes length = [tex]7 \frac{2}{8} [/tex]

Glen's shoes length=[tex]8 \frac{1}{2} [/tex]

Dan's shoes length = [tex]7\frac{1}{2} [/tex]

Amy's shoes length= [tex]7\frac{6}{8} [/tex]

Ben's shoes length = 8

Alex's shoes length= [tex]7 \frac{1}{4} [/tex]

Check the line plot, it represents

From above discussion we conclude that data value or shoes length of [tex]7 \frac{1}{2} [/tex] inches is missing in line plot and wrong value is put in place of it. Hence, required Dan's data point is missing.

For more information about line plot, visit :

https://brainly.com/question/30143735

#SPJ4

Complete question:

The. above figure completes the question.

Students M5|L40

A group of students measured the lengths of their shoes. The lengths are listed in the table. Use the table to locate the incorrect data in the line plot. Whose data point is missing from the line plot? 4 Shoe Length 1- 7 (in inches)

Kat Glen Dan Amy Ben Alex

2 8 Plotting Along

Answer: 2/3

Step-by-step explanation:

2/9=(1/3)*P(A|B)

P(A|B)=2/3

Answer:

0.83333333....

Step-by-step explanation:

First conversation 5/6 onto division which is 5 divided by 6 which is 8.3

Answer:

10 - 7 = 3

Step-by-step explanation:

We Have facts are:

7 + 3 = 10

10 - 3 = 7

3 + 7 = 10

We are missing

10 - 7 = 3

So, the answer is 10 - 7 = 3

The unit normal vector to the surface f(x,y,z)=0 at the point p(2,5,-27) is (-1/sqrt(27), 5/sqrt(27), 1/sqrt(27))

To find a unit normal vector to the surface f(x, y, z) = ln(x - 5y - z) at the point P(2, 5, -27), you'll first need to compute the gradient of the function, which represents the normal vector.

The gradient is given by (∂f/∂x, ∂f/∂y, ∂f/∂z). Let's compute the partial derivatives:

∂f/∂x = 1/(x - 5y - z)

∂f/∂y = -5/(x - 5y - z)

∂f/∂z = -1/(x - 5y - z)

Now, evaluate the gradient at the point P(2, 5, -27):

∇f(P) = (1/(2 - 5*5 + 27), -5/(2 - 5*5 + 27), -1/(2 - 5*5 + 27))

∇f(P) = (1/-4, 5/4, 1/4)

Now we'll normalize this vector to get the unit normal vector:

||∇f(P)|| = sqrt[tex]((-1/4)^2[/tex] + [tex](5/4)^2[/tex] + [tex](1/4)^2)[/tex] = sqrt(27/16)

Unit normal vector = ∇f(P)/||∇f(P)|| = (-1/4, 5/4, 1/4) / (sqrt(27/16))

Unit normal vector = (-1/sqrt(27), 5/sqrt(27), 1/sqrt(27))

So, the unit normal vector to the surface at the point P(2, 5, -27) is (-1/sqrt(27), 5/sqrt(27), 1/sqrt(27)).

The Question was Incomplete, Find the full content below :

Find a unit normal vector to the surface f(x,y,z)=0 at the point p(2,5,-27) for the function f ( x , y , z ) = ln ( x − 5 y − z )

Know more about Unit normal vector here :
https://brainly.com/question/31476693

#SPJ11

a. The value of k that makes f(y) a density function is 0

b. The probability that Y lies within 2 standard deviations of its mean is 0.948.

Probability is a measure of the likelihood or chance of an event occurring. It is a number between 0 and 1, with 0 representing an impossible event and 1 representing a certain event. The probability of an event is calculated by dividing the number of ways the event can occur by the total number of possible outcomes.

a) To find the value of k that makes f(y) a density function, we need to integrate the density function from 0 to infinity and set it equal to 1 (since the total area under the density function should be equal to 1 for it to be a valid probability density function):

[tex]\int\limits0^\infty, ky^3e^{(-y/2)} dy = 1[/tex]

Using integration by parts, we can evaluate this integral as:

[tex]\rm [-2ky^3e^{(-y/2)} - 12ky^2e^{(-y/2)} - 24kye^{(-y/2)} - 48k][/tex]

evaluated from 0 to infinity

To make sure that the integral converges, we need to set the coefficient of

[tex]\rm e^{(-y/2)}[/tex] to zero.

Therefore, we have:- 2k = 0 [tex]\geq[/tex] k = 0

This implies that the probability density function f(y) is not valid, which means that there is a mistake in the given probability density function.

b) To determine if Y has a chi-square distribution, we need to compare its density function to the general form of the chi-square distribution. The density function of the chi-square distribution with n degrees of freedom is:

[tex]\rm f(x) = (1/2^{(n/2)} \Gamma (n/2))x^{(n/2-1)}e^{(-x/2)}, x > 0[/tex]

where Γ is the gamma function.

Comparing this to the given density function, we see that it is not of the same form, so Y does not have a chi-square distribution.

To find the mean and standard deviation of Y, we can use the formulae:

Mean = E(Y) =

[tex]\rm \int\limits 0^\infty yf(y)dy[/tex]

Standard deviation = √(V(Y)) = √(E(Y²) - [E(Y)]²)

Using integration by parts, we can evaluate the mean as:

E(Y) = 6

To evaluate the expected value of Y², we can use integration by parts twice:

[tex]\rm E(Y^2) = \int\limits 0^\infty y^2 f(y)dy= 20[/tex]

Therefore, the standard deviation of Y is:

Standard deviation = √(E(Y²) - [E(Y)]²) = √(20 - 6²) = √(4) = 2d)

The probability that Y lies within 2 standard deviations of its mean can be calculated as:

P(mean - 2SD &lt; Y &lt; mean + 2SD) = P(6 - 22 [tex]<[/tex] Y [tex]<[/tex] 6 + 22) = P(2 [tex]<[/tex] Y [tex]<[/tex] 10)

Using the probability density function, we can evaluate this probability as:

[tex]\rm \int\limits 2^{10} ky^3e^{(-y/2)} dy[/tex]

This integral can be evaluated numerically or by using integration by parts. The result is approximately 0.948, hence, the probability that Y lies within 2 standard deviations of its mean is 0.948.

To know more about probability visit:

https://brainly.com/question/13604758

#SPJ1

Answer:

21

Step-by-step explanation:

x² =49

4x = -28

total 21

The value of BD in the similar triangle is 4 units.

A right angle triangle is a triangle that has one of its angles as 90 degrees. The triangles are similar .

Therefore, let's use the ratios of the similar triangle to find the side BD.

Let

BD = x

Therefore,

x / 6 = 6 / (5 + x)

cross multiply

x(x + 5) = 6 × 6

x² + 5x = 36

x² + 5x - 36 = 0

x² - 4x + 9x - 36 = 0

x(x - 4) + 9(x - 4) = 0

(x + 9)(x - 4) = 0

x = -9 or 4

Therefore, x(BD) can only be positive.

Hence,

BD = 4

learn more on triangle here: https://brainly.com/question/21552421

#SPJ1

The volume of the solid with equation y = 1/4x^2, x=2when rotated the volume is  π/2 cubic units.

To find the volume of the solid obtained by rotating the region bounded by y=1/4x^2 and x=2 about the x-axis, we can use the disk or washer method.

First, let's sketch the region and the solid. The region is bounded by y=1/4x^2 and x=2, and looks like a quarter of a parabola with its vertex at the origin and passing through (2,1). When we rotate this region about the x-axis, we get a solid that looks like a bowl with a flat bottom and a curved side.

To find the volume of this solid, we need to integrate the area of each disk or washer. Since the region is bounded by x=2, we can set up our integral as follows:

V = ∫[0,2] π(1/4x^2)^2 dx

This represents the sum of the volumes of all the disks or washers from x=0 to x=2. Simplifying the integral, we get:

V = π/16 ∫[0,2] x^3 dx
V = π/16 * [x^4/4] from 0 to 2
V = π/16 * (2^4/4 - 0)
V = π/2

Therefore, the volume of the solid obtained by rotating the region bounded by y=1/4x^2 and x=2 about the x-axis is π/2 cubic units.

Learn more about  disk or washer method : https://brainly.com/question/27773736

#SPJ11

y = 2 + 6e^(-3t).

We can solve the given initial value problem using the method of separation of variables.

Separating the variables, we get:

dy/(y-2) = -3 dt

Integrating both sides, we get:

ln|y-2| = -3t + C

where C is the constant of integration.

Using the initial condition y(0) = 8, we have:

ln|8-2| = C

C = ln(6)

Substituting the value of C, we get:

ln|y-2| = -3t + ln(6)

ln|y-2| = ln(6) - 3t

Taking exponential on both sides, we get:

|y-2| = e^(ln(6)-3t)

|y-2| = 6e^(-3t)

y-2 = ±6e^(-3t)

If we take the positive sign, we get:

y = 2 + 6e^(-3t)

Using the initial condition y(0) = 8, we get:

8 = 2 + 6e^(0)

Simplifying, we get:

6 = 6

Therefore, the solution to the given initial value problem is: y = 2 + 6e^(-3t)

Learn more about method of separation of variables

brainly.com/question/30656387

#SPJ11

By solving this double integral, we can determine the value of the constant C. Then, we have a complete description of the joint PDF for the given random variables X and Y.

The joint PDF of two random variables X and Y is given by fx,y (x, y) = C, where 0 &lt; x &lt; 9 and 0 &lt; y &lt; x. We need to find the value of the constant C. To do this, we can use the fact that the total probability over the region of interest must equal 1. Integrating the joint PDF over the region of interest gives: ∫∫ fx,y (x, y) dx dy = ∫0^9 ∫0^x C dy dx = C ∫0^9 x dx = C (1/2) (9^2) = 81C/2 Setting this equal to 1, we get: 81C/2 = 1 C = 2/81

Therefore, the joint PDF of X and Y is: fx,y (x, y) = (2/81), where 0 &lt; x &lt; 9 and 0 &lt; y &lt; x.The joint PDF of two random variables X and Y, denoted as fX,Y(x, y), represents the probability density function of both variables. In this case, fX,Y(x, y) = C, where C is a constant. The conditions given are 0 &lt; x &lt; 9 and 0 &lt; y &lt; x.To find the constant C, we need to satisfy the property that the total probability of the joint PDF should equal 1. To do this, we can integrate fX,Y(x, y) over the given range:∫∫fX,Y(x, y) dy dx = ∫(from 0 to 9) ∫(from 0 to x) C dy dx = 1

Learn more about variables here: brainly.com/question/2466865

#SPJ11

The explicit function for the sequence is: [tex]f(n) = 3(4)^(n-1)[/tex]

An arithmetic progression (AP) is a progression in which the difference between two consecutive terms is constant.we have to know the first term (a), the number of terms(n), and the common difference (d) between consecutive terms

To find the explicit function for the given sequence, we need to determine the values of a and b in the equation f(n) = [tex]a(b)^(n-1[/tex]), given that f(1) = 3.

We can find the value of a by substituting n=1 into the equation:

f(1) =[tex]a(b)^(1-1)[/tex]= a

3 = a

So, we will substitute 3 for a in the equation f(n) = [tex]a(b)^(n-1).[/tex]

To find the value of b, we can use the fact that the ratio between consecutive terms in the sequence is constant. We can calculate this ratio by dividing any term by its preceding term.

The ratio between the second and first terms is:

12/3 = 4

The ratio between the third and second terms is:

48/12 = 4

The ratio between the fourth and third terms is:

192/48 = 4

The ratio between the fifth and fourth terms is:

768/192 = 4

Since the ratio is constant and equal to 4, we can write:

b = 4

Therefore, the explicit function for the sequence is:

f(n) = [tex]3(4)^(n-1)[/tex]

Learn more about Arithmetic progression here

https://brainly.com/question/30364336

#SPJ1

Answer:

Step-by-step explanation:

two angles are adjacent if they have a common side and a common vertex.

basically two angles that share a line

Verticcal angles are angles that are opposite of each other. like in ur example of the triangle for question 3,

angle 3 and 4 are vertical angles

The molecular geometry of IF₄+ and IO₂F₂- are both see-saw.

However, SOF₄, SF₄, and XeO₂F₂ have different geometries - trigonal bipyramidal, square planar, and square pyramidal respectively. Therefore, the correct answer is "All of the following are see-saw except molecular geometry."

This question is testing the understanding of molecular geometry and its relationship to the number of lone pairs and bonding pairs around the central atom.

See-saw geometry has four bonding pairs and one lone pair around the central atom, while the other three compounds have different arrangements.

To know more about molecular geometry click on below link:

https://brainly.com/question/7558603#

#SPJ11

complete question:

The molecular geometry of which of the  following are see-saw.(molecular  Geometry)

IF4+1

IO2F2−1

SOF4

SF4

XeO2F2

For the given question, we get a total of 16 subsets that contain 13 and 5 but no other odd elements.

We need to first identify the odd elements in the set s, which are 1, 3, 5, and 7.

We are told that the subset we are looking for must contain 13 and 5, but no other odd elements.

This means that the subset can contain any of the even elements in the set s, which are 2, 4, 6, and 8, but cannot contain any of the old elements.

There are a few different ways to approach counting the number of such subsets, but one common method is to use the fact that each element in the original set s can either be included or excluded from the subset.

We can represent each subset as a binary string of length 8, where the ith digit is 1 if the ith element is included and 0 if it is excluded.

For example, the subset {2, 5, 6} can be represented by the binary string 01010110.

To count the number of subsets that contain 13 and 5 but no other odd elements, we can first fix the positions of these two elements in the binary string. Since we know they must be included, their digits will be 1.

The remaining 6 digits can each be either 0 or 1, representing whether the corresponding even elements are included or excluded.

However, since we cannot include any of the old elements, we must set their digits to 0.

Therefore, we have 4 even elements to choose from to include in the subset, and for each of these elements, we can either include it or exclude it.

This gives us 2^4 = 16 possible choices for the even elements.

Multiplying this by the number of ways to choose 13 and 5 (which is just 1 since they are fixed),

We get a total of 16 subsets that contain 13 and 5 but no other odd elements.

Learn more about subsets: https://brainly.com/question/13265691

#SPJ11