For the homogeneous solution consisting of KCl and H₂O, the type of forces that are involved is the dipole-dipole forces, the ion-dipole forces dispersion forces, the hydrogen bonding.
In the homogeneous solution if the two compounds are KCl and H₂O, they both polar and the forces involved are dipole - dipole forces and the dispersion forces. the forces present in between the water molecules is the hydrogen bonding. the forces in between the K⁺ and the Cl⁻ present is the ion - dipole forces,
Thus the all the four forces present in the homogeneous solution of the KCl and H₂O that is the dipole-dipole forces, the ion-dipole forces, the dispersion forces, and the hydrogen bonding.
To learn more about forces here
https://brainly.com/question/7033619
#SPJ4
What process do orcas use oxygen for?
The process orcas uses the oxygen is from the blowholes. the blow holes are situated on the top of of the head and it uses oxygen from their.
The whales and the humans uses the lungs for the respiration or to get oxygen required for the breathing. the orcas uses the oxygen from the blow holes situated at the top of the head. The orcas lives under the water and when the orcas dive in the water they have ability to hold the breath for at the time . but this is not good for the health . it is be very stressful for the body.
Thus, the process do the orcas uses oxygen for the intake is the from the blow holes.
To learn more about orcas here
https://brainly.com/question/29784862
#SPJ4
In terms of binding energy per nucleon, what element divides fission and fusion processes? O He
O U O Fe
O C
O H
Fe which is Iron is the element that distinguishes between fission and fusion processes in terms of binding energy per nucleon.
Since the negatively charged electrons are held in place by the electrostatic pull of the positively charged nucleus, the electron binding energy is the lowest energy needed to remove an electron from an atom. Fe element distinguishes between fission and fusion processes in terms of binding energy per nucleon. In particle physics, the term "binding energy" describes the energy an atom receives from electromagnetic interaction as well as the quantity of energy needed to break an atom down into free nucleons.
Learn more about Binding Energy
brainly.com/question/15718710
#SPJ4
Does carbon-14 or nitrogen-14 have more neutrons?
Carbon 14 would have more neutron than nitrogen 14
The atomic number of an atom, as is generally known, represents the total number of protons that make up the nucleus of that atom. We are aware that the mass number of carbon is 14, and that its atomic number is 6. It is well-known that protons and neutrons combine to form mass. As a result, there will be = 14 - 6 = 8 neutrons.
while he mass number of nitrogen is 14, and that its atomic number is 7. It is well-known that protons and neutrons combine to form mass. As a result, there will be = 14 - 7 = 7 neutrons.
Therefore, Carbon 14 would have more neutron than nitrogen 14
Learn more about neutron at brainly.com/question/29248303
#SPJ4
Calculate the mass of water needed to prepare 45 g of salt solution if the salt content in the solution is 12%.
The mass of water needed to prepare 45 g of salt solution if the salt content in the solution is 12% is 330g.
The solute is the thing that needs to dissolve, and the solvent is the thing that needs to dissolve it. With a wide variety of solutes and solvents, solutions can be created. We are aware of a wide range of solutions.
Given,
Mass of the salt solution (Solute) = 45g
salt content in the solution = 12%
Let Mass of water = x
Total mass of solution = 45 + x
Concentration of solution = Mass of solute / Mass of Solution × 100
⇒ 12 = 45 / 45 + x × 100
⇒ 12/100 = 45 / 45 + x
⇒ 0.12 = 45 / 45 + x
⇒ 0.12 (45 + x) = 45
⇒ 5.4 + 0.12x = 45
⇒ 0.12x = 45 - 5.4
⇒ x = 330g
To learn more about solute and solution from given link
https://brainly.com/question/25326161
#SPJ1
How long will it take Caroline to travel 45 miles if she is traveling 37mph (miles per hour)?
In the given question,It will take Caroline 1.2 hours to travel 45 miles if she is traveling 37 mph (miles per hour).
As we know the velocity formula:
v = d/t
Where
V is velocity, d is distance and t is time.
as given in the question
distance = 45 miles
velocity = 37 mph
To find time t,
put the values in the formula:
t = d/v
t = 45/37
t = 1.2 hours
It will take Caroline 1.2 hours to travel 45 miles if she is traveling 37 mph (miles per hour).
If you need to learn more about similar questions, click here
https://brainly.com/question/29243041?referrer=searchResults
#SPJ4
Why is it that some materials made up of entirely nonmetal atoms are soluble in water while some are not
some materials made up of entirely nonmetal atoms are soluble in water while some are not Due to different combinations of pairs created, which might either dissolve extremely well, or not dissolve whatsoever
The solubility of a substance in water depends on the nature of the chemical interactions between the substance and the water molecules. Some materials made up of entirely nonmetal atoms are soluble in water because they can form hydrogen bonds with the water molecules. These materials are called polar solvents and are typically composed of polar molecules, like those found in many organic compounds. For example, ethanol (C2H5OH) is a polar solvent that is composed of entirely nonmetal atoms and is soluble in water because it can form hydrogen bonds with the water molecules.On the other hand, some materials composed of entirely nonmetal atoms are not soluble in water because they do not form hydrogen bonds with the water molecules. These materials are called non-polar solvents and are typically composed of non-polar molecules, like those found in many hydrocarbons.
Learn more about hydrogen bond here:
https://brainly.com/question/15099999
#SPJ4
Liquid hexane CH3CH24CH3 will react with gaseous oxygen O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. Suppose 7.76 g of hexane is mixed with 34. g of oxygen. Calculate the minimum mass of hexane that could be left over by the chemical reaction. Round your answer to 2 significant digits.
the minimum mass of hexane that could be left over by the chemical reaction is 17.2 grams of.
Hexane, a non-polar solvent having a boiling point of 68 degrees Celsius, is the one used to extract the oil from rice bran to produce rice bran oil (RBO). The International System of Units uses the mole (symbol: mol) as the unit of material quantity. How many elementary entities of a particular substance are present in an object or sample is determined by the quantity of that material.
Hexane moles equal 29/86=0.34
41.3/32 = 1.30 moles of oxygen
One mole of hexane takes 9.5 moles of oxygen, as shown by the reaction.
In this case, oxygen is the limiting reagent.
Consumption of moles of hexane is 1.30/9=0.144
Hexane remaining in moles is equal to 0.20 to 0.34 moles.
Hexane mass remaining = 0.2*86=17.2 grams.
Learn more about Hexane
brainly.com/question/863881
#SPJ4
Container A holds 747 mL747 mL of ideal gas at 2.90 bar2.90 bar . Container B holds 119 mL119 mL of ideal gas at 4.30 bar4.30 bar . If the gases are allowed to mix together, what is the partial pressure of each gas in the total volume
the partial pressure of gas A in the total volume is 3.57 bar, and the partial pressure of gas B in the total volume is 0.70 bar.
When the gases are allowed to mix together, the total pressure of the mixture is equal to the sum of the partial pressures of each gas. The partial pressure of each gas is equal to the product of the total pressure and the mole fraction of that gas. To find the mole fraction of each gas, we first need to find the number of moles of each gas. The number of moles of gas in container A is given by PV/RT where P is the pressure, V is the volume, R is the ideal gas constant and T is the temperature.
n_A = (2.90 bar * 747 mL) / (8.314 J/molK * (273.15 + 23)) = 0.0295 mol
The number of moles of gas in container B is given by PV/RT
n_B = (4.30 bar * 119 mL) / (8.314 J/molK * (273.15 + 23)) = 0.0045 mol
The total number of moles of gas in the mixture is the sum of the number of moles of gas in container A and container B.
n_total = n_A + n_B = 0.0295 mol + 0.0045 mol = 0.0340 mol
The mole fraction of gas A in the mixture is the number of moles of gas A divided by the total number of moles of gas.
x_A = n_A / n_total = 0.0295 mol / 0.0340 mol = 0.8735
The mole fraction of gas B is
x_B = n_B / n_total = 0.0045 mol / 0.0340 mol = 0.1324
The partial pressure of gas A is equal to the total pressure multiplied by the mole fraction of gas A.
P_A = (0.8735) * (2.90 bar + 4.30 bar) = 3.57 bar. The partial pressure of gas B is equal to the total pressure multiplied by the mole fraction of gas B. P_B = (0.1324) * (2.90 bar + 4.30 bar) = 0.70 bar
So the partial pressure of gas A in the total volume is 3.57 bar, and the partial pressure of gas B in the total volume is 0.70 bar.
Learn more about partial pressure here:
https://brainly.com/question/14119417
#SPJ4
The reaction of hydrogen (H2) and fluorine (F2) produces hydrofluoric acid (HF). How many grams of HF are produced if 3. 00 g of hydrogen react with excess fluorine with a 25 percent yield?
1.50g of hydrofluoric acid is produced if 3.00 g of hydrogen reacts with excess fluorine with a 25 percent yield.
The balanced equation for the reaction of hydrogen (H2) and fluorine (F2) to form hydrofluoric acid (HF) is:
H2 + F2 -> 2HF
To calculate the amount of HF produced, we'll use the concept of theoretical yield and percent yield.
The theoretical yield is the maximum amount of product that can be formed based on the amount of reactants used.
Here, we're given that 3.00 g of hydrogen is used, so to find the theoretical yield of HF, we'll use the molar ratio of hydrogen to hydrofluoric acid in the balanced equation.
1 mol of H2 produces 2 mol of HF
So, 3.00 g of H2 produces 2*3.00g = 6.00g of HF
Percent yield is the ratio of the actual yield to the theoretical yield multiplied by 100%.
It's given that the yield is 25%.
So the actual yield of hydrofluoric acid will be:
Actual yield = (Theoretical yield) x (percent yield/100)
Actual yield = 6.00g x (25/100)
Actual yield = 1.50g
So, 1.50g of hydrofluoric acid is produced if 3.00 g of hydrogen reacts with excess fluorine with a 25 percent yield.
Learn more about stoichiometry and chemical reactions here: https://brainly.com/question/14935523
#SPJ4
How do you most effectively increase the buffering capacity of a pH 4.9 buffer containing acetate (pKa 4.76)
A conjugate base solution with a pH between 8 and 10 has little buffer capacity, however at higher pHs, the strong base's presence begins to matter more.
Because of the large concentration of H + cations, a pure acetic acid solution with a pH below 3 already has a pH that is resistant to changes. This is because the concentration of the capacity is so high that it is unaffected by changes in the equilibrium of the solution brought on by the concentration of other ions. Why is a buffer more effective if its pKa is close to the pH? Why does a buffer function best when pH and pKa are equal? Why does increasing the pH by a basic or an acid.
To learn more about buffer please click on below link
https://brainly.com/question/22821585
#SPJ4
diatomic elements are important. what makes them different from other elemental substances?
Atoms follow the octet rule, which makes them more stable in pairs.
The diatomic elements oxygen and nitrogen have a slightly more complex structure. There is a double bond between the two O atoms in the O₂ dot structure. And there is a triple bond between the two N atoms in the N₂ dot structure. Diatomic elements are elements that are never found alone in nature. It is always bound to another atom. The diatomic state of this atom is much more stable than its unbonded state.
Everything around us contains energy, even if it doesn't move. All molecules and atoms have spins and vibrations, but these are all internal forces.
All atoms try to reach the lowest potential. Atom has a state of lower energy, implying maximum stability under certain external conditions.
Learn more about octet rule visit:
brainly.com/question/865531
#SPJ4
different between ionic and metallic bond
Answer:
Whereas ionic bonds join metals to non-metals, metallic bonding joins a bulk of metal atoms.
Explanation:
hope this helps
2CuO(s)+NO(g)→Cu2O(s)+NO2(g)
Express your answer using three significant figures.
ΔHrxn∘ =
ΔHrxn∘ = -144 kj / mol is the Standard Enthalpy of the reaction. It is the sum of the individual enthalpies of the reactants subtracted from the sum of enthalpies of the products.
2CuO(s)+NO(g) → Cu2O(s)+NO2(g)
[tex]Cu_{2}O[/tex] → 2[tex]Cu[/tex] + 1/2 [tex]O_{2}[/tex] eqn 1
ΔH1 = [tex]Cu_{2}O[/tex] - 2 Cu - 1/2 [tex]O_{2}[/tex]
ΔH1 = -168.6 kj / mol
2[tex]NO[/tex] + [tex]O_{2}[/tex] → [tex]2NO_{2}[/tex] eqn 2
ΔH2 = 2 [tex]NO[/tex] + [tex]O_{2}[/tex] - [tex]2NO_{2}[/tex]
ΔH2 = -114.1 kj / mol
[tex]CuO[/tex] → [tex]Cu[/tex] + [tex]1/2 O_{2}[/tex] eqn 3
ΔH3 = Cuo - Cu - [tex]1/2 O_{2}[/tex]
ΔH3= 157.3 kj / mol
1/2 eqn 2 + 2 eqn 3 - eqn 1
Δ H= -57.05 + 78.65 -168.6
ΔH= -144 kj / mol
To learn more about Enthalpy
https://brainly.com/question/13996238
#SPJ4
Warm air rises because:
A.) It is made of helium
B.) As it warms the particles spread out making it less dense
C.) As it warms the particles get closer together making it more dense
D.) Air always moves towards the sun or moon due to gravity
As the air gets warmer it rises because, particles spread out making it less dense. The diffusing capability of gas molecules make it possible.
What is intermolecular forces ?Intermolecular force are the force that keep the particles of a substance binded together. Gaseous molecule easily diffuse in air , since the intermolecular attraction is very less in them.
In solid state molecules are densely packed and difficult to move apart. In liquid state , particles have some space to move and in gases molecules are far apart due to less intermolecular force.
As the gas molecules in air absorbs heat energy, they overcome all the intermolecular forces and will spread out in the air. Thus, they rises above over a temperature gradient.
Find more on intermolecular force:
https://brainly.com/question/9007693
#SPJ2
How do we measure the distance?
We measure the distance through many objects like; Radar, Parallax, Capheids, Redshift and Hubble's Law etc.
Distance is termed as the size or magnitude of the displacement between two positions.
There are several ways to measure the distance in terms of science. Firstly, Radar: It is used to measure the distance in our solar system and to measuring the distances to nearby the stars are Parallax. Whereas, Capheids is also used to measuring the distance in our galaxy and to nearby the galaxies. However, Supernovae will measuring the distances to other galaxies and the last one is Redshift and Hubble's Law it is used to measuring the distances to objects which is far away.
To know more about distance here
https://brainly.com/question/15172156
#SPJ4
What is the relationship between CO2 levels and sea levels?
The relationship between the CO₂ and the sea levels is the carbon dioxide is higher about 10 % at deep ocean than the surface.
This warms world due to the greenhouse gases that included the carbon dioxide , the water heat up and it expands due to which the sea level rises. if we remove the extra heat from the ocean that caused by the short lived gases , it lowers the sea levels and this process is very slow.
The carbon dioxide that dissolves in the ocean will cause the sea water to be acidify. this will harmful for the shellfish and the corals.
To learn more about carbon dioxide here
https://brainly.com/question/29855234
#SPJ4
In a given reaction, the rate may be expressed as either rate What must be true about X or Y if the reaction is proceeding in the forward direction
In a given reaction, the rate may be expressed as either the rate of formation of a product (X) or the rate of consumption of a reactant (Y). If the reaction is proceeding in the forward direction, the rate of formation of the product (X) will be positive and the rate of consumption of the reactant (Y) will be negative.
This means that X is being produced at a faster rate than it is being consumed and Y is being consumed at a faster rate than it is being produced.
Alternatively, if the reaction proceeds in the opposite direction, the rate of formation of products (X) is negative and the rate of consumption of reactants (Y) is positive. This means that X is consumed faster than it is produced, and Y is produced faster than it is consumed.
Learn more about the rate of reaction here: https://brainly.com/question/24795637
#SPJ4
What physical property is characteristic of all of the elements in the group 18 of the periodic table?
The quantity of electrons inside the valence (outermost) shells as well as the electron configurations among elements belonging to the identical group are identical. They display comparable chemical characteristics.
Noble gases were low chemically reactive, odourless, colourless, nonflammable, as well as monotonic gases. Noble gases are exceedingly stable as well as uncommon to form chemical connections since they have minimal inclination to receive or lose electrons, thanks to the complete valence electron shells of such atoms.
These gases don't receive, lose, or share electrons, making them inert as well as unreactive. They are often referred to as noble gases due to their rarity inside the atmosphere of the earth.
To know more about Noble gases
https://brainly.com/question/11764545
#SPJ4
Place the following molecules in order of decreasing bond angle: NH3, CO2, CCl4, OF2
O CO2 > CCl4 > NH3 > OF2
O NH3 > CO2 > CCl4 > OF2
O CO2 > CCl4 > OF2 > NH3
O CCl4 > CO2 > OF2 > NH3
O OF2 > NH3 > CCl4 > CO2
The order of decreasing bond angle for the given molecules is :
O OF2 > NH3 > CCl4 > CO2
In molecules with a central atom, the bond angle is determined by the electron pair-bond pair repulsion. The bond angle decreases as the number of electron pair-bond pair increases. In OF2 the central atom is O, and it has 2 lone pairs and 2 single bonds, the bond angle is expected to be smaller than in the other molecules.In NH3, the central atom is N, and it has 3 single bonds and 1 lone pair, the bond angle is expected to be larger than in OF2 but smaller than in CO2 and CCl4. In CO2 and CCl4, the central atoms are C and Cl respectively, and they have 4 single bonds and no lone pairs, the bond angle is expected to be larger than in NH3, but smaller than in OF2.
Learn more about bond angle here:
https://brainly.com/question/1851495
#SPJ4
At 298 K and 1 atm, bromine is a liquid with a high vapor pressure, whereas chlorine is a gas. This provides evidence that, under these conditions, the
At 298 K and 1 atm, bromine is a liquid with high vapor pressure, while chlorine is a gas. This proves that the intermolecular forces of bromine are greater than those of chlorine under these conditions.
At a temperature of 298 K and a pressure of 1 atm, bromine is in a liquid state due to the strong attraction between Br-Br molecules.
At the same temperature and pressure, chlorine exists in the gaseous state due to covalent bonds, while bromine has non-polar covalent bonds.
Learn more about covalent bond visit:
brainly.com/question/12661797
#SPJ4
select all that apply. please help! i will mark you brainliest
Kinetic energy increases as mass increases
The shape of the mass vs energy graph shows a linear relationship
When we double the mass, we double the energy.
Interpreting a graphThe graph shown in the image is a plot of the kinetic energy of objects on the y-axis and the mass of the objects on the x-axis.
The graph is a straight line. This shows that there is a linear relationship between the two parameters - the kinetic energy and mass of objects. Thus, the kinetic energy increases as mass of objects increases, and decreases as mass of objects increases.
From the graph, when the mass of objects are doubled, there is also a double in the amount of the kinetic energy of objects.
In summary, the graph shows that:
Kinetic energy increases as mass increasesThe shape of the mass vs energy graph shows a linear relationshipWhen we double the mass, we double the energy.More on interpreting graphs can be found here: https://brainly.com/question/28418462
#SPJ1
The extended structure of sodium chloride (NaCl) is shown.
Which of the following describes the configuration of Layer 4 of the sodium chloride crystal?
OPTIONS
A
It will be identical in all of its characteristics to Layer 1.
B
It will contain 4 atoms of chlorine and 5 atoms of sodium.
C
It will have chlorine atoms in all four of its corners.
D
It will have sodium that are bonded only to other sodium atoms.
Sodium chloride crystal will contain 4 atoms of chlorine and 5 atoms of sodium. Therefore, option B is correct.
What is sodium chloride?In sodium chloride, each ion is usually surrounded by 6 ions of the opposite charge. The surrounding ions are positioned at the vertices of a regular octahedron.
In the language of close-packing, the larger chloride ions are arranged in a cubic array whereas the smaller sodium ions fill all the cubic gaps between them.
The basic structure is commonly known as the halite or rock-salt crystal structure. It can be represented as a face-centered cubic lattice with a two-atom basis or as two face centered cubic lattices. The one atom is located at lattice point, and the second atom is located halfway between lattice points along edge of the fcc unit cell.
Learn more about Sodium chloride, here:
https://brainly.com/question/6649122
#SPJ1
What is the mass in grams of 1.56 moles of aspartame?
459.1 g of aspartame has a 1.56 moles of aspartame.
Artificial sweetener aspartame is potent and low in calories. About 200 times sweeter than sugar, it is a white, odourless powder. It is legal to use in Europe as a tabletop sweetener, an energy-reducing food ingredient in beverages, desserts, and sweets, dairy products, chewing gum, and other foods.
Aspartame is a dipeptide that is created through the formal condensation of the amino group of methyl L-phenylalaninate with the alpha-carboxy group of L-aspartic acid.
Here, aspartame has 1.56 moles.
Molar mass of aspartame = 294.40 g/mol
So, Number of moles of aspartame = [tex]\frac{Given Mass}{Molar Mass}[/tex]
Mass of aspartame = Number of moles × Molar mass
or, mass = 1.56 × 294.3
or, mass = 459.1 g
Hence, Mass of aspartame of 1.56 moles of aspartame is 459.1 g.
To know more about aspartame from the link
brainly.com/question/10361394
#SPJ4
A compound is found to contain 15.94 % boron and 84.06 % fluorine by mass. What is the empirical formula for this compound
The empirical formula of the compound is BF3.
The empirical formula of a compound is the simplest whole-number ratio of atoms that represents the compound's composition. To determine the empirical formula of a compound, we need to determine the number of moles of each element present and then simplify the ratio of moles to the smallest whole-number ratio.
First, we can use the percentages of boron and fluorine to find the number of grams of each element present in 100 grams of the compound:
15.94 g boron / 100 g compound
84.06 g fluorine / 100 g compound
Next, we can convert the number of grams of each element to moles using the molar masses of boron and fluorine:
15.94 g B / (10.81 g/mol) = 1.48 mol B
84.06 g F / (18.99 g/mol) = 4.44 mol F
To find the empirical formula, we divide the number of moles of each element by the lowest number of moles:
1.48 mol B / 1.48 mol B = 1.00
4.44 mol F / 1.48 mol B = 3.00
So the empirical formula of the compound is BF3.
It's important to note that this is the empirical formula, and the actual formula of the compound could be a multiple of this depending on the chemical structure of the compound.
Learn more about Empirical Formula here: https://brainly.com/question/11588623
#SPJ4
If 25.0 mL of 15M nitric acid is diluted to 125 mL, what is the concentration of the new solution?
Answer:2.5M
Explanation:
let the number of moles = x
x/0.025L =15
x= 15*0.025 = 0.375 moles
the concentration of the new solution = moles / volume =
0.375 / (0.025+0.125) = 2.5M
A mixture of gases contains oxygen, nitrogen, and hydrogen at 0 degrees Celsius. The partial pressure of the oxygen gas is 20 kPa, the partial pressure of nitrogen gas is 40 kPa, and the partial pressure of hydrogen gas is 14 kPa. What is the total pressure exerted
The total pressure exerted by the gas mixture is 74 kPa.
What is hydrogen?Hydrogen is an odorless, colorless, and tasteless gas that is the most abundant element in the universe. It is the lightest of all elements and is a component of many compounds, such as water and hydrocarbons. Hydrogen has the highest energy content of any common fuel, making it an attractive energy source. Additionally, it is utilised in the manufacture of fertiliser, polymers, and pharmaceuticals as well as a propellant.
This is calculated by adding up the partial pressures of each individual gas in the mixture, which in this case is 20 kPa for oxygen, 40 kPa for nitrogen, and 14 kPa for hydrogen. 20 + 40 + 14 = 74
To learn more about Hydrogen
https://brainly.com/question/24433860
#SPJ4
Classification of Drugs - Trafficking Penalties
Case Scenarios:
Roody Zeeland was captured by Federal Marshals as he attempted to smuggle 39 kg of
cocaine into Dallas in a horse-drawn covered wagon. While attempting to escape, the
Suspect hit and killed an innocent bystander. It was his first offense.
11. If convicted, what penalty will the suspect be sentenced to?
Federal Marshals will receive trafficking penalty for attempting smuggling.
Trafficking is what kind of a crime?Human trafficking, also referred to as trafficking in persons, is a crime that entails forcing or coercing a person to perform work or services or engage in sexual acts for monetary gain. The exertion of pressure may be covert or obvious, physical or psychological.
A conviction for keeping someone in servitude carries potential fines and a maximum 20-year prison sentence in a federal facility. The maximum penalty is life in prison if there is a death as a result of the violation or if it involved kidnapping, sexual assault, or other aggravating circumstances.
To know more about trafficking penalty visit:
https://brainly.com/question/14449916
#SPJ1
Which of the following answer choices would BEST describe Marco Polo's reaction when he saw the Chinese using coal
The majority of Europeans at the time had never heard of coal, which Marco Polo described as "black stones...which burn like logs."
Initially, charcoal was utilized in the production process, which caused extensive deforestation in northern China. However, coal had fully replaced charcoal by the end of the 11th century.
They do indeed have an abundance of firewood. However, due to the massive population and the large number of bathhouses and baths that are continually being heated, it would be impossible to supply enough firewood, as everyone takes a bath at least three times each week, and in the winter, if they can, every day. Since every man of rank and means has a bathroom of his own at home, the abundance and low cost of these stones result in significant wood savings.
To learn about coal click here
https://brainly.com/question/12981477
#SPJ4
How many moles are in 50 grams?
3.125 moles of oxygen are present in 50 g.
A mole is the volume of a substance that contains 6.022 X 1023 of the substance's particles, atoms, ions, molecules, etc. A mole is a unit for counting molecules, ions, or atoms. Divide the given mass of an element by its molar mass to find the number of moles in that quantity.
The atomic weight of an element, or its relative atomic mass, on the periodic table, expressed in g/mol, is its molecular mass.
The molar mass of oxygen is 16 g/mol, and there are 3.125 moles in a given amount of mass and molar mass.
Consequently, 3.125 moles of oxygen are present in 50 g.
To know more about moles click here
https://brainly.com/question/26416088
#SPJ4
15) Lidocaine 2 gm/500 mL D5W is ordered to run at 3.5 mg/min. At what rate should the IV pump be set
Ordered to run at 3.5 mg/min is a dose of lidocaine 2 g/500 mL D5W. The IV pump should be set at a rate of 52.5 mL per hour.
Given 1mg/min = 60mg/hour
Then 3.5 mg/min = 3.5 x 60 mg/hour = 210mg/hour
Lidocaine is 2gm/500mL = 2000mg/500mL
If you only need to calculate the infusion rate, or the amount of medication to infuse per hour, you can do it by taking the entire volume in mL and dividing it by the total number of hours the medication is supposed to be infused over. This will give you the rate in mL per hour.
Then the flow of rate = 210mg/hour / 2000mg/500mL = 210x500/2000 = 52.5mL/hour.
To learn more about flow of rate click here https://brainly.com/question/24560420
#SPJ4