which wave has the longer wavelength? calculate the wave- length. which wave has the higher frequency and larger photon energy? calculate these values. which wave has the faster velocity? what type of electromagnetic radiation are illustrated?
Electromagnetic radiation consists of electromagnetic field waves that propagate through space and carry electromagnetic radiation energy. These include X-rays, gamma rays, microwaves, infrared rays, light, and radio waves. In the electromagnetic spectrum, all of these waves are included.
For the wavelength:
Wave A has four crests, thus its wavelength can be calculated as follows:
λ = L/4
Where, λ = wavelength of a wave
L = total length of wave (1.6 × 10⁻³ m)
λ = 1.6 × 10⁻³ /4
λ = 4.1 × 10⁻⁴ m
Wave B has eight crests, thus its wavelength can be calculated as:
λ = L/8
Where, λ = wavelength of the wave
L = total length of wave (1.6 × 10⁻³ m)
λ = 1.6 × 10⁻³/8
λ = 2.0 × 10⁻⁴ m
This, explains that wave A has a higher wavelength.
Also, the wavelength in the range of 10⁻⁴m corresponds to the infrared region.
For the frequency:
ν = c/λ
Where, ν = frequency
c = speed of light (2.99 × 10⁸ m/s)
λ = wavelength
Wave A has a wavelength of 4.1 × 10⁻⁴ m, so the frequency of the photon will be:
ν = 2.99 × 10⁸/4.1 × 10⁻⁴
ν = 7.49 × 10¹¹ s⁻¹
Wave B has a wavelength of 2.0 × 10⁻⁴ m, so the frequency of photon will be:
ν = 2.99 × 10⁸/2.0 × 10⁻⁴
ν = 1.49 × 10¹² s⁻¹
Hence, wave B has a higher frequency.
For photon energy:
E = hν
Where, E = photon energy
h = plank's constant (6.626 × 10⁻³⁴ Js)
ν = frequency
Wave A has a frequency of 7.49 × 10¹¹ s⁻¹:
E = (6.626 × 10⁻³⁴)(7.49 × 10¹¹)
E = 4.96 × 10⁻²³ J
Wave A has a frequency of 1.49 × 10¹² s⁻¹:
E = (6.626 × 10⁻³⁴)(1.49 × 10¹²)
E = 49.93 × 10⁻²² J
Hence, wave B has greater energy.
To know more about electromagnetic radiation, visit:
https://brainly.com/question/10759891
#SPJ4
the visible surface of the sun is composed of solid matter.
a. true
b. false
This statement is FALSE, the visible surface of the sun is composed of solid matter.
The sun is made totally out of plasma, the fourth nation of depending after gasoline, liquid, and strong, and the most energetic. As you could consider, the sun is tremendously hot. It varies among nine,900-27,000,000°F in temperature among the “surface” (the outer limb of its environment where it becomes obvious to light as opposed to opaque), and the middle.
Unlike the gasoline massive planets, which probably have a strong middle, the sun is made nearly out of hydrogen and helium, the lightest of all the elements, and at no point, internal should either of those exist as a solid at the one’s temperatures, despite the awesome pressures that exist in the solar. It’s plasma all the way down, even at the center where the density is ten instances that of gold.
To learn more about the sun visit here:
brainly.com/question/13353299
#SPJ4
A square coil, enclosing an area with sides 6. 4 cm long, is wrapped with 3,038 turns of wire. A uniform magnetic field perpendicular to its plane is turned on and increases to 0. 47 t during an interval of 1. 2 s. What is the magnitude of the induced voltage in the coil?.
The magnitude of the induced voltage in the coil is 0.25 V. The induced emf will be strong enough to counteract the underlying voltage shift.
Lentz's Law states that a coil will create or induce a back emf of V if a voltage of V is applied to it when it is not carrying any current. The same holds true if a coil is already carrying current; the back emf will then adapt to any applicable change in voltage (V) for the same reason. The voltage in inductors can be discontinuous, but the current is always a continuous function of time.
Learn more about voltage here-
https://brainly.com/question/13521443
#SPJ4
A 750 kg car is at rest at a red light. If the light turns green and it zooms away with an acceleration of 7. 8 m/s2 how fast will it be traveling in 7 seconds? express your answer in meters per second.
A 750kg car with an acceleration of 7.8m/s^2 will be as fast as 54.6m/s when it travels for 7 seconds.
It is a rate at which velocity changes with time, in terms of both speed and direction. A point or an object moving in a straight line is accelerated if it speeds up or slows down.
How to calculate the speed of 750kg car when traveling in 7 seconds?
Vf = Vo + a*t
Vo = initial speed = 0 (the car is at rest at a red light)
Vf = final speed
a = acceleration = 7.8m/s^2
t =time = 7s
Vf = Vo + a*t
Vf = 0 + 7.8 * 7
Vf = 54.6m/s
Learn more about acceleration https://brainly.com/question/13154163
#SPJ4
The Eatern coat of South America and the wetern coat of Africa are eparated by the Atlantic Ocean. If cientit find the ame type of plant foil on the eatern coat of South America and wetern coat of Africa, which of thee would be the bet concluion
It can be concluded that at one time in the past, South America and Africa were once one. Beside of the same type of plant foil on the eastern coast of South America and western coat of Africa, we can identify other similar reason that the coastlines of South America and Africa on opposite sides of the Atlantic Ocean seem to fit together.
Is it true that once upon a time South America and Africa is a continent?Yes, is it. Let's back to 1915, a German scientist named Alfred Wegener, proposed that continents could move around on the earth’s surface. He said that in the past there is a supercontinent in the earth named Pangea Continent. Not only South America and Africa, but also all of the continents were all together in the past.
Learn more about Pangea Supercontinents https://brainly.com/question/1867605
#SPJ4
Give one concrete example of the following concepts in relation to your daily routine at home.
1. Law of Inertia
2. Law of Acceleration
3. Law of Interaction
4. Work and Power
5. PE to KE
6. Sound and Light
7. Heat and Electricity
Answer:
Example for 1. Law of Inertia
Falling forward while getting down from a moving bus:
When a passenger gets down from a moving bus, their upper body is still in motion, and when it comes in contact with the ground which is at rest, their body topples forward due to the inertia of motion.
Example for 2. Law of Acceleration
Hitting a Ball:
A ball develops a certain amount of acceleration after being hit. The acceleration with which the ball moves is directly proportional to the force applied to it. This means that the harder you hit the ball, the faster it will move
Example for 3. Law of Interaction
Walking:
Whenever people walk, their foot exerts a force on the ground. The ground then exerts an equal force which points in the opposite direction. It is this force (force due to friction) that allows the person to move forward.
Example for 4. Work and Power
As P=F.v
Cycling:
A person riding a bicycle possesses some amount of energy. This energy is utilized by the cyclist to do work on the paddles of the bicycle by applying some force and enabling the bicycle to move forward.
Example for 5. PE to KE
An apple hanging on a tree:
It has the potential energy due to its raised position. When the apple falls from the tree. The falling apple has the kinetic energy. Thus the potential energy stored in the apple in its raised position changes into the kinetic energy when the apple is falling. This kinetic energy does work on stone as the apple strikes the stone, and it makes the stone to move into the ground.
Example for 6. Sound and Light
TV:
We see TV takes electrical energy as input and produces. light energy, sound energy.
Example for 7. Heat and Electricity
The electric heaters:
An electric heater is an electrical device that converts an electric current into heat.
Radiation dosage is commonly measured in
A) rads.
B) rems.
C) joules.
D) none of the above
Radiation dosage is usually measured in rads.
What is radiation damage?When ionizing radiation enters a human body or object, it stores energy. The energy absorbed by exposure to radiation is called dose. Radiation dose size is expressed in three ways: absorbed, equivalent and effective.
The energy absorbed by the human body after being exposed to radiation is called the absorbed dose. Absorbed dose is measured in units called Grays (Gy). A dose of 1 Gray corresponds to 1 Joule of energy stored in 1 kilogram of matter. Radiation has always been around us. In fact, life evolved in a world containing significant amounts of ionizing radiation. It comes from space, earth, and even from within our own bodies. Natural background radiation doses vary by location and habits.
To know more about radiation dosage visit:
https://brainly.com/question/29375503
#SPJ4
The larger the frequency of a photon of light, the _______ the energy of the photon.
The larger the frequency of a photon the larger , the energy of the photon.
A phantom is a particle representing a quantum of light or another electromagnetic radiation such as light and radio waves and the force carrier for the electromagnetic force.
The reason why the larger the radiation e frequency the larger the energy of the photon is the photon carries energy proportional to the radiation frequency but has zero rest mass.
The photon travels at the speed of light in a vacuum, it is said to be massless as it is an elementary particle whose invariant mass is zero.
Photons have no mass their kinetic energy is equals to their total energy
To learn more about photons see:
https://brainly.com/question/8913888?referrer=searchResults
#SJP4
if the mass of the objects stays the same and their distance from eachother decreases, then the force of gravity between the two objects
a charged particle of mass 0.0090 kg is subjected to a 6 t magnetic field which acts at a right angle to its motion. if the particle moves in a circle of radius 0.1 m at a speed of 3 m/s , what is the magnitude of the charge on the particle?
The magnitude of the charge on the particle q= 4.5 X 10 -2 C
What is the magnitude of charge on the particle?
Charge can be defined as a physical property that leads matter to experience a force within an electromagnetic field
If a non-zero magnetic force acts on a charged particle, then the particle will move along a circular or a helical path. It requires the presence of centripetal force to act on the particle, provided by the magnetic force on the particle.
The radius of the circular or helical path of the particle will depend upon the charge carried by the particle, the strength of the magnetic field, and the mass of the particle, and velocity will be perpendicular to the magnetic field.
The mass of the particle , m = 0.0090kg =
9.0 ×10 − 3kg
The speed of the particle, v = 3.0m/s
The magnitude of the magnetic field,
B = 6.0T
The radius of the circular path,
r = 0.10 m
The uniform magnetic field is given by the following equation:
r = mv / qB
Here,
q = mv / rB
q = 9.0 x 10 -3 kg X 3.0 m/s / 0.10 X 6
q= 4.5 X 10 -2 C
To know more about Charge from the given link
https://brainly.com/question/12975539
#SPJ4
two cars travel towards one another. car a travels at a speed of 30 mph to the right (the positive x direction). car b travels at 10 mph to the left. let vab be the velocity of car a as seen by the driver of car b (i.e. the velocity of a relative to b). vba is the the velocity of
-20 mph is the the relative velocity of vba
Va=30 mph
Vb=10 mph
Vab= Vb - Va = 20 mph
Vba=Va - Vb= -20 mph
An object's relative velocity is the speed at which it moves in relation to another object. It serves as a method of determining how swiftly two objects are traveling with respect to one another. Relative velocity is essential to comprehending physics because it helps us grasp how objects move and interact with one another. Relative velocity can be estimated for a variety of interactions. An object's relative velocity is the speed at which it moves in relation to another object. It serves as a method of determining how swiftly two objects are traveling with respect to one another. Relative velocity is essential to comprehending physics because it helps us grasp how objects move and interact with one another.
To know more about relative velocity visit : brainly.com/question/12924624
#SPJ4
How much sound energy does the source emit in one hour if its power output remains constant?.
93.6 joule is the energy if source emit in one hour and its power output remains constant
I= 0.026 W/m^2
t= 3600 sec
power= energy/time
energy=power×time
energy= 0.026×3600
energy=93.6 joule
Energy is the ability to perform work in physics. Different shapes, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc., may be assumed by it. Other instances of energy being transmitted from one body to another include heat and work. Energy is always distributed after it has been transferred in accordance with its type. Thus, heat transfer could result in thermal energy, whereas work could result in mechanical energy.
Motion is a trait shared by all forms of energy. For instance, if a body is moving, it possesses kinetic energy. Due to the object's design, which integrates potential energy, a tensioned object, such a spring or bow, has the ability to move even when at rest.
To know more about energy visit : brainly.com/question/1932868
#SPJ4
consider two identical wind turbines with a hub height of 40 m, one located in flat agricultural land and one located above a forest. what is the ratio of output power for the two turbines if the wind velocity is 10 m/s at a height of 100 m in both cases?
The ratio of output power for the two turbines is:
P₁/P₂ = 8.87³/ 8.34³
P₁ = 1.203 P₂
What is power?Power, the amount of energy transferred or converted per unit time. In the International System of Units, the unit of power is the watt, which is equivalent to 1 joule per second. Power is a scalar quantity.
Now let's discuss about the mentioned case:
For flat agricultural land:
Given,
Height (h₁) = 100 m
Wind velocity = 10 m/s
Height of wind turbines (h₂) = 40 m
For flat agricultural land let's consider the roughness to be of class 1.
So, f₀ = 0.03 ( coefficient of friction)
∴ v₂ = v₁ × ln (h₂/f₀) / ln (h₁/f₀)
= 10 × ln(40/0.03) / ln(100/0.03)
= 10 × 7.195/8.112
= 8.87 m/s
For forest land:
Given,
Height (h₁) = 100 m
Wind velocity = 10 m/s
Height of wind turbines (h₂) = 40 m
For forest and let's consider the roughness to be of class 3.
So, f₀' = 0.4 ( coefficient of friction)
∴ v₂' = v₁ × ln (h₂/f₀') / ln (h₁/f₀')
= 10 × ln(40/0.4) / ln(100/0.4)
= 10 × 4.605/5.521
= 8.34 m/s
Now, power output (P): ¹/₂ ρAv³C
Where, P = power
ρ = density of air
A = swept area
C = power coefficient
v = wind speed
P₁/P₂ = ¹/₂ ρAv₂'³C / ¹/₂ ρAv₂'³C
P₁/P₂ = 8.87³/ 8.34³
P₁ = 1.203 P₂
P₁ = Power of wind turbine in flat agricultural land
P₂ = Power of wind turbine in forest
Using above explanation we can conclude that the wind turbine in flat agricultural land produces more power than the wind turbine in forest.
To know more about power, visit:
https://brainly.com/question/17614839
#SPJ4
Can you also give me 3 problems Mark Watney Face In The Martian and how he solved?please give some explanation for each of one.
Three problems faced by Mark Watney are :
The first major problem Watney faces is getting stranded and wounded on Mars. The second problem Watney faces is how he is going to survive on mars till help can come. The final problem he faces is how is he going to get to Ares, so he can leave Mars.What did Mark Watney do on Mars?
Mark Watney was also selected to perform experiments on plant growth using Martian Soil and Martian gravity.
Why was Mark Watney left on Mars?
Watney gets stranded on the Red Planet when a massive dust storm gravely injures him and forces his crewmates to escape, leaving him dead.
To know more about Mark Watney :
https://brainly.com/question/25679828
#SPJ1
some objects absorb all light and do not release any for us to find. how do we detect an object that is not releasing any light? how do we find it?
Since the majority of objects in the world do not emit their own light, they must reflect light in order to be seen. The walls of the room you are in reflect the light from the overhead ceiling "lights," not producing any of their own light.
We can only see when light is emitted from the things and strikes our eyes. Some objects, which do not all have the ability to emit light on their own, reflect light. We perceive an object when light strikes it and is reflected back to us by the object's surface.
what is reflection?
Light rays' direction changes and they turn around when they hit an item. This is referred to as light reflection. Incident rays are any rays that land on a surface. The point of incidence is the location at which an incident ray falls.
To learn more about reflection
Here: https://brainly.com/question/4070544
#SPJ4
Since the majority of objects in the world do not emit their own light, they must reflect light in order to be seen. The walls of the room you are in reflect the light from the overhead ceiling "lights," not producing any of their own light.
What is reflection?
Light rays' direction changes and they turn around when they hit an item. This is referred to as light reflection. Incident rays are any rays that land on a surface. The point of incidence is the location at which an incident ray falls.
We can only see when light is emitted from the things and strikes our eyes. Some objects, which do not all have the ability to emit light on their own, reflect light. We perceive an object when light strikes it and is reflected back to us by the object's surface.
To learn more about reflection
brainly.com/question/4070544
#SPJ4
a cube of wood having an edge dimension of 18.9 cm and a density of 649 kg/m3 floats on water. (a) what is the distance from the horizontal top surface of the cube to the water level?
The density of the wood from the floor is 2.8 kg.
What is buoyancy force?
A thing's propensity to float in a liquid is called buoyancy. When there is gravity present, all liquids and gases pull anything submerged in them upward with a force known as the buoyant force. An object submerged in a static fluid will float because of the pressure differences acting on its opposing sides.
What is density?
The definition of density for a solid substance is its mass per unit volume. The equation for density is d = M/V and stands for density, mass, and volume. Density is commonly measured in grammes per cubic centimeter.
Apply particle in equilibrium model, to the system of the wood cube and lead block in the vertical direction.
∑fy= B-m wood* g-mg=0
we know
B(buoyant + force)d water L^3 g
Where L^3 is the volume of displaced water
d water L^3 g- m wood*g-mg=0
now density (d)= mass(m)/volume(v)
d water L^3- d wood L^3- m =0
solve for m
m= d water L^3- d wood L^3
m=(d water- d wood) L^3
m=(1-0.65)(20)^3
m=2.8 kg
Therefore, density of the wood from the floor is 2.8 kg.
Learn more about buoyancy force from the given link.
https://brainly.com/question/11884584
#SPJ4
AP Physics Help. 13 points!!
There have 3 forces acting on the helicopter.
There have 2 forces acting on the load.
Magnitude of net force = 200 N.
Magnitude of acceleration of the system = 0.0833 m/s².
The speed of the system is increasing.
Given parameters:
Mass of the helicopter, M = 2000 kg
Mass of the load; m = 400 kg
Thrust force; F = 26000 N.
Hence, there have 3 forces acting on the helicopter: weight of the helicopter, weight of the load, and thrust.
There have 2 forces acting on the load: weight of the load and thrust.
Total mass of the system = M +m = 2000 kg + 400 kg = 2400 kg.
Magnitude of net force = Thrust - weight of the system
= F - (M + m)g
= 26000 - (2000 + 400) × 10
= 200 N.
Magnitude of acceleration of the system = Magnitude of net force / Total mass of the system
= 200/2400 m/s².
= 0.0833 m/s².
Hence, the speed of the system is increasing.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ1
a car is traveling at 50 mi/h when the brakes are fully applied, producing a constant deceleration of 24 ft/s2. what is the distance (in ft) traveled before the car comes to a stop? (round your answer to one decimal place.) 52.1 incorrect: your answer is incorrect. ft
One of the key areas of science is the study of acceleration and deceleration. Any object's rate of changing velocity is referred to as its acceleration, and a negative acceleration value is referred to as deceleration.
Using beginning velocity of 50 miles per hour,
It's going to
Final speed: 73.33 ft/s, v = 0, and a2: -22 ft/s2.
Utilize the formula: v2 = v0 + 2as
n 0 = 5377.29 + (-44) s
s =5377.29/44 = 122.21 ft
v2 = u2 + 2as is the third equation of motion. We are already aware that distance is equal to average velocity times time. Either v2 = u2 + 2as or 2as = v2 - u2. The third equation of motion connects the particle's final velocity (v), initial velocity (u), constant speed (a), and displacement (S).
Speed is defined as the ratio of distance travelled to the amount of time required to cover that distance.
To know more about motion, click on the link below:
https://brainly.com/question/14812762
#SPJ4
If a car collides with a moving bus, what type of relationship exists between the force of the car and the force of the bus?.
Equal but in opposing directions, forces of the car and the force of the bus.
Given that both objects are moving, you can be sure that the collision is elastic and that the forces involved in the collision between the bus and the car will be equal.
Without force, objects cannot be moved, stopped, or changed direction. Force can be defined as the pushing or pulling of any object as a result of the object's interaction or movement. In nature, there are various types of forces that interact quantitatively between two physical bodies, such as an object and its surroundings. If an object is in motion or in a static state, the position of the object can only be changed by an external force—referred to as force—pushing or pulling against it. The various types of contact force include spring force, applied force, air resistance force, normal force, tension force, friction force, and others that are generated when we exert some effort on an object. Non-contact forces, which include electromagnetic, gravitational, and nuclear forces, are another category of forces that exist at a distance.
To know more about contact force, click on the link below:
https://brainly.com/question/18451249
#SPJ4
listed following are characteristics of the atmospheres of venus, earth, and mars. match each atmospheric characteristic to the appropriate planet.
Runaway greenhouse effect caused by Venus' sulfuric acid clouds and lack of surface winds.The majority of the Earth's atmosphere is composed of nitrogen.The atmosphere of Mars is very thin.
The layers of gas that surround and are held in place by a planet's gravitational pull make up the atmosphere of that planet. When the atmosphere's temperature is low and its gravity is strong, a planet can maintain its atmosphere. The gaseous layers encircling a planet or other celestial body are known as its atmosphere. About 78% of the atmosphere on Earth is made up of nitrogen, 21% of it of oxygen, and 1% of other gases. Depending on temperature, the atmosphere is made up of layers. Tropospheric, stratospheric, mesospheric, and thermospheric layers make up this system. The exosphere is a further zone located around 500 kilometers above the surface of the Earth. The atmosphere is the name given to the cloud of air that envelops the planet.
Learn more about atmosphere here :
https://brainly.com/question/11192430
#SPJ4
What is brewster’s angle for light traveling in water that is reflected from crown glass?.
The correct answer to Brewster’s angle is 48.8 degrees.
What is Brewsters's law?
The Brewster's angle is the angle of incidence at which polarised light travels perfectly through a clear dielectric surface without being refracted. The light that is reflected from the surface when unpolarized light is incident at this angle is therefore perfectly polarised.
This equation's name is Brewster's law, and the angle it specifies is Brewster's angle. For a glass medium in air, Brewster's angle for visible light is around 56° (n2 = 1.5), while it is roughly 53° for an air-water interface (n2 = 1.33)
Brewster's Angle is defined as the inverse tan of n 2 over n 1. The inverse tan of 1.52 divided by 1.33 is thus 48.8 degrees.
To learn more about brewster's law the link is given below;
https://brainly.com/question/28274806?
#SPJ4
einstein's theory of general relativity predicts that, group of answer choices time appears to slow for moving objects. stars should collapse into black holes. gravity is caused by curved spacetime. lengths appear to contract for moving objects.
According to Einstein's general theory of relativity, curved spacetime is what causes gravity.
Why does gravity have a force?However, gravity a force in the broadest sense since it defines the interaction that results when two masses are in close proximity to one another. The warping of spacetime and also the motion of things through the stretched spacetime are the primary causes of gravitational effects. It appears as though a force was exerted towards the end, though.
What causes gravity?With the publication of his general theory of relativity in 1915, Albert Einstein provided the solution. All mass-bearing things, such as the Earth, really bend and curve spacetime, which is what causes gravity to draw you toward the earth. You experience gravity because of its curvature.
To know more about gravity visit:
https://brainly.com/question/9722860
#SPJ4
The chart below shows information about three stars.
Name of Star Beginning of life cycle End of life cycle
Star 1 nebulae white dwarf
Star 2 nebulae neutron star
Star 3 nebulae black hole
Which of these statements is most likely correct about the three stars?
They do not emit energy.
They do not have the same initial mass.
They are made of the same materials.
They have the same quantity of elements.
The most likely correct about the three stars is: They do not have the same initial mass.
What is Chandrasekhar limit?The Chandrasekhar limit is established at a mass where the gravitational field's self-attraction cannot be balanced by the pressure from electron decay. The limit that has been established these days is 1.39 solar mass.
Hence, stars of average masses ends by forming white dwarf or neutron star but massive stars ends their life by forming black hole. Hence, They do not have the same initial mass.
Learn more about stars here:
https://brainly.com/question/29411440
#SPJ1
describe what happens when a star forms. begin with a dense core of material in a molecular cloud and trace the evolution up to the time the newly formed star reaches the main sequence.
In general, collapse causes central heating, which ultimately causes temperatures conducive to hydrogen ignition. Particularly, material from the molecular cloud's outer reaches transforms gravitational potential energy into kinetic energy as it falls inward toward the cloud's core when gravity outweighs pressure.
The material is either added to the central protostar or spun out into the protoplanetary disc when it reaches the centre of the cloud, converting its kinetic energy into thermal energy. As more material is added, the protostar gets hotter and brighter.
When the centre of the object reaches temperatures of 10-15 million K and nuclear fusion starts, its central pressure and temperature likewise rise. Other angular momentum-related processes shape the material surrounding the collapsing core in the interim and regulate the volume of material engaged in the collapse.
what is kinetic energy?
Kinetic energy is a type of energy that is present in every object or particle that is moving. When work, which entails the exchange of electrons, is done on an object by applying a net force, that object acquires kinetic energy.
To learn more about kinetic energy
Here: https://brainly.com/question/8101588
#SPJ4
A dense core of material in a molecular cloud begins to collapse due to gravity.
What is gravity?
Gravity is indeed a fundamental interaction in physics that causes all objects with mass or energy to attract one another. The electromagnetic force, the weak interaction, and the strong interaction are all significantly stronger than gravity, which is by far the weakest of a four fundamental interactions. As a result, this has no appreciable impact on subatomic particle level phenomena. However, at the macroscopic level, gravity is the most important interaction between objects and governs the movement of planets, stars, galaxies, or even light. The Moon's gravity causes sublunar tides in the oceans, just as gravity on Earth gives weight to physical objects.
As it collapses, it heats up and the central regions become hotter than the surrounding material. This causes the central regions to become more dense and the surrounding material to be expelled. The star continues to collapse and heat up until it reaches the main sequence, where it stabilizes and begins to produce energy through nuclear fusion.
To learn more about gravity
https://brainly.com/question/557206
#SPJ4
Which of the statements about the protonephridia of freshwater flatworms is accurate?
a. Muscular contractions drive fluid movement through the excretory tubules.
b. The fluid passing through the tubules is not modified before excretion.
c. Protonephridia are surrounded by a capillary network to allow for selective reabsorption and secretion.
d. The urine leaving the body of a freshwater flatworm is more concentrated than its body fluids.
e. Fluid from the body enters the protonephridia without first being filtered.
Using the theories of protonephridia, we got that the statements about the protonephridia of freshwater flatworms which is accurate is e)Fluid from the body enters the protonephridia without first being filtered.
The flame cell is a specialized excretory cell found in the simplest freshwater invertebrates, including flatworms, rotifers, and the nemerteans. Bundles of the flame cells are called Protonephridia. Protonephridia helps in the osmoregulation or ion-regulation. They are also helpful in the excretion.
Protonephridium is the network of dead-end tubules lacking internal openings found in the phyla Platyhelminthes, Nemertea
Hence, the the statements about the protonephridia of freshwater flatworms is accurate is option e) Fluid from the body enters the protonephridia without first being filtered.
To know more about protonephridia, visit here:
https://brainly.com/question/27627475
#SPJ4
A 1.0 kg cart is moving with a speed of 12 m/s when it bounces off of a wall. It bounces off and moves in the opposite direction with the same speed. What was the change in momentum of the cart?
The change in momentum of the cart is 24 kg⋅m/s.
What is momentum?
A particle's linear momentum, p, when it is travelling at a certain speed is described as
p = mv
The linear momentum is a vector quantity.When two objects collide, a force is applied for a predetermined period of time, changing the momentum of the item. When a force acts for a predetermined period of time, the object's mass either increases or decreases (or changes direction).
The change in momentum of the object is equal to the impulse it experiences. F • t = m • v is an equation.When two objects collide, they both experience an impulse, which both causes and is equal to the change in momentum.Elastic collisions occur when two objects collide and then rebound with the same speed (and, consequently, momentum, and kinetic energy) as they did before the collision.Given in the question,
Mass of the cart = 1.0 kg
Initial velocity of the cart, vi = 12 m/s
Final velocity of the cart, vf = 12 m/s
The magnitude of the cart's momentum change is
Δp= m∣νi − νf∣
= (1 .0 kg)∣(12.0m/s)−(−12.0m/s)∣
= 24 kg⋅m/s.
Hence, The change in momentum of the cart after collision with the wall is 24 kg⋅m/s.
To learn more about momentum from the given link
https://brainly.com/question/20363811
#SPJ9
A wavelength of 510nm corresponds to an approximate frequency of 6×1014s−1. What is the approximate energy of one photon of this light?.
The energy emitted by a photon is equal to 7,72 × 10⁻¹⁰ J.
To answer this sola we use the photon energy formula:
E = h(c/λ)
Where:
Wavelength: λ = 510 nm = 5.1 x 10⁻¹⁰ mApproximate frequency: c = 6 × 10¹⁴ Planck'sconstant: h = 6.6 × 10⁻³⁴ JsOnce the values are known, enter them into the formula:
E = h(c/λ)
[tex]E = 6,6 * 10^{-34} \frac{6*10^{14} }{5,1 *10^{-10}}[/tex]
[tex]E = 6,6 * 10^{-34}(1,17 *10^{24})[/tex]
[tex]E = 7,72*10^{-10} J[/tex]
So, we can conclude that the approximate energy of one photon of this light is 7,72 × 10⁻¹⁰ J.
Learn more about photon energy at https://brainly.com/question/13886090
#SPJ4
as more resistors are added in series to a constant voltage source, the power supplied by the source series/parallel circuits: as more resistors are added in series to a constant voltage source, the power supplied by the source decreases. increases. does not change. increases for a time and then starts to decrease.
The work energy of speed is 1304.2.
What is work energy?
Work energy is the most fundamental quantity of physics. Work is said to be done when a force applied to an object cause a displacement of a object.
Solution -
As per the given-
Mass of runner m = 74kg
Initial velocity of runner u=4.8 m/s
Final velocity of runner v =0
Coefficient of friction ¥=0.7
Let's d be the distance moved by runner till the stop.
a- mechanical energy lost due to friction
As friction does negetive work causing the runner to stop.
As we know,
Mechanical energy lost= Kinetic energy of runner
Mechanical energy lost = 1/2 mv^2 = 1/2 ×74×4.8^2=852.2
Distance move by runner- Work done by friction = mechanical energy lost
-¥×mg×d =852.2 j
-0.7×74×9.8×d = -491.2
Solving the equation we get
1304.2.
To know more about work energy click-
https://brainly.com/question/10063455
#SPJ9
James has an old kettle with a power rating of 1. 4 kw. He buys a new kettle with a power rating of 2. 0 kw. How does this affect the time it takes to boil a fixed volume of water?.
The old kettle with a power rating of 1.4kw, and the one with a power rating of 2.0kw. With this condition, this will affect the time it takes to boil a fixed volume of water quicker than before.
In electrical engineering and mechanical engineering, the power rating of equipment is the highest power input allowed to flow through particular equipment. According to the particular discipline, the term power may refer to electrical or mechanical power.
How does power rating affect the time it takes to boil a fixed volume of water?
Since, the power rating is higher, logically it has higher power than before. Since it is a fixed volume of water, so the only difference is power rating. With greater power, it will take shorter amount of time to boil the same water by volume.
Learn more about power rating https://brainly.com/question/24191483
#SPJ4
which of the following would increase the magnitude of the centripetal force acting on an object traveling in a horizontal, circular path? select two correct answers.
The magnitude of the centripetal force acting on an object traveling in a horizontal, circular path is increases mass, velocity and radius of the path.
centripetal force:
It is a type of force which acting on a object on circular path that keeps the object moving on that path.
Centripetal force is calculated as:
F = 1/2(mv²)
where,
F = centripetal force
m = mass of the object
v = velocity of the object.
From the above relation centripetal force is directly proportional to the mass and velocity and inversely proportional to the radius.
The given question is incomplete. The complete question is
Which of the following would increase the magnitude of the centripetal force acting on an object traveling in a horizontal, circular path?
The magnitude of the centripetal force acting on an object traveling in a horizontal, circular path is increases mass, velocity and radius of the path.
To know more about centripetal force :
https://brainly.com/question/11324711
#SPJ4