given that the measured pH of a 0.10 M NH3(aq) = 11.15 and that of the 0.10 M NaOH(aq)= 12.85
A.) Which solution is more basic, explaining based on pH values?

B.) Considering the strength of each base and the identical solution Molarities, why is one so much more basic than the other ?

Answer:

The process you are referrring to is erosion.

Explanation:

Weathering would be the breaking down of rock/other land debris. Its more active counterpart would be erosion, wherein the process transports the bits of rock and minerals away. Hope it helps!

Answer:

b

Explanation:

one clue is the double bond at 4 carbon c=c

The correct structure that corresponds to the name.

3-bromo-6-methyl-4-octene is   [tex]$\mathrm{CH}_{3} \mathrm{CH}_{2} \mathrm{CHBrCH}=\mathrm{CHCH}\left(\mathrm{CH}_{3}\right) \mathrm{CH}_{2} \mathrm{CH}_{3}$[/tex] .

The molecule in which bromine is attached with C-3 carbon and double present at C-4 carbon containing total number of 8 carbon atom can be considered as 3-bromo-6-methyl-4-octene.

A chemist specifies the molecular geometry and, where possible and required, the electronic structure of such given molecule as well as other solid during a chemical structure determination.

It can be seen that in molecule [tex]$\mathrm{CH}_{3} \mathrm{CH}_{2} \mathrm{CHBrCH}=\mathrm{CHCH}\left(\mathrm{CH}_{3}\right) \mathrm{CH}_{2} \mathrm{CH}_{3}$[/tex] bromine is attached with C-3 carbona and double bond exist at C-4 carbon. the total number of carbon atom is 8.

therefore, the structure of the compound will be [tex]$\mathrm{CH}_{3} \mathrm{CH}_{2} \mathrm{CHBrCH}=\mathrm{CHCH}\left(\mathrm{CH}_{3}\right) \mathrm{CH}_{2} \mathrm{CH}_{3}$[/tex].

To know more about  structure of the  3-bromo-6-methyl-4-octene click here.

https://brainly.com/question/4072914.

#SPJ2

Answer:

Calm down is this what you need?

Answer:

calm down, what kind of container and things do you need?

Explanation:

Answer:

Experiment 8 E Data Table 3 fl Data Table 4 fl Data Table 5 fl Data Table 6 Data Table 3: Polystyrene Test Tube, 12x75mm Volume of water at room temperature (V1 in mL) Volume of gas in polystyrene tube at boil (V2 in mL) Temperature of gas at boil inside polystyrene tube (°C) Volume of gas in polystyrenetube at room temperature (V3 in mL) Temperature of gas.

Explanation:

Hope this helps

Mark as Brainliest please

Answer:

HCO₂

Explanation:

From the information given:

The mass of the elements are:

Carbon C = 26.7 g;     Hydrogen H = 2.24 g     Oxygen O = 71.1 g

To determine the empirical formula;

First thing is to find the numbers of moles of each atom.

For Carbon:

[tex]=26.7 \ g\times \dfrac{1 \ mol }{12.01 \ g} \\ \\ =2.22 \ mol \ of \ Carbon[/tex]

For Hydrogen:

[tex]=2.24 \ g\times \dfrac{1 \ mol }{1.008 \ g} \\ \\ =2.22 \ mol \ of \ Hydrogen[/tex]

For Oxygen:

[tex]=71.1 \ g\times \dfrac{1 \ mol }{1.008 \ g} \\ \\ =4.44 \ mol \ of \ oxygen[/tex]

Now; we use the smallest no of moles to divide the respective moles from above.

For carbon:

[tex]\dfrac{2.22 \ mol \ of \ carbon}{2.22} =1 \ mol \ of \ carbon[/tex]

For Hydrogen:

[tex]\dfrac{2.22 \ mol \ of \ carbon}{2.22} =1 \ mol \ of \ hydrogen[/tex]

For Oxygen:

[tex]\dfrac{4.44 \ mol \ of \ Oxygen}{2.22} =2 \ mol \ of \ oxygen[/tex]

Thus, the empirical formula is HCO₂

The oceans absorb the most sunlight from the options that we have here.

Seventy-one percent or more of the surface of the Earth is covered by the oceans. The result is that they get a lot of sunshine. The upper layers of the ocean absorb a large amount of the incoming solar energy, which enters the ocean waters.

Solar radiation is efficiently absorbed by water, especially in the visible light spectrum. The ocean heats the water as a result of absorbing sunshine. The oceans' ability to absorb solar energy is vital for driving a variety of marine phenomena, including currents, circulation patterns, and temperature distribution, as well as managing Earth's climate.

Learn more about earth:https://brainly.com/question/12041467

#SPJ1

Answer:

The answer is A. Oceans.

Explanation:

I did the test.

Answer: The mass of sodium acetate anhydrous required is 0.820 g

The mass of sodium acetate trihydrate required is 1.36 g

The mass of Iron (III) chloride required is 2.70 g

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n = moles of solute

= volume of solution in ml

1. moles of =

Now put all the given values in the formula of molarity, we get

[tex]0.100=\frac{x\times 1000}{82.03\times 100.0}[/tex]

[tex]x=0.820g[/tex]

Therefore, the mass of sodium acetate anhydrous required is 0.820 g

2.   moles of [tex]CH_3COONa.3H_2O[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{xg}{136.08g/mol}[/tex]

Now put all the given values in the formula of molarity, we get

[tex]0.100=\frac{x\times 1000}{136.08\times 100.0}[/tex]

[tex]x=1.36[/tex]

Therefore, the mass of sodium acetate trihydrate required is 1.36 g

3. moles of [tex]FeCl_3.6H_2O[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{xg}{g/mol}[/tex]

Now put all the given values in the formula of molarity, we get

[tex]0.100=\frac{x\times 1000}{270.33\times 100.0}[/tex]

[tex]x=2.70g[/tex]

Therefore, the mass of Iron (III) chloride required is 2.70 g

Answer:

Waterrrr

Explanation:

H2O

Answer:

Muscle contraction

Explanation:

According to the new study, exercise improves muscle health by renewing its cellular powerhouse: the mitochondria. Mitochondria are crucial to the good functioning of our bodies, as well as to our overall health and longevity. These tiny parts of the cell turn the food we eat into energy.

Answer:

To estimate the enthalpy change for Equilibrium 1, we need to calculate the bond energies for the reactants and products of the reaction and use them to determine the change in enthalpy.

The bond energies for the reactants of Equilibrium 1 are:

C2H4(g): 412 kJ/mol

Cl2(g): 243 kJ/mol

The bond energies for the products of Equilibrium 1 are:

C2H4Cl2(g): 575 kJ/mol

We can use these bond energies to calculate the enthalpy change for Equilibrium 1 as follows:

ΔrH = [C2H4Cl2(g)] - ([C2H4(g)] + [Cl2(g)])

ΔrH = 575 kJ/mol - (412 kJ/mol + 243 kJ/mol)

ΔrH = 120 kJ/mol

Therefore, the enthalpy change for Equilibrium 1 is approximately 120 kJ/mol.

For Equilibrium 2, the bond energies for the reactants are:

C2H4Cl2(g): 575 kJ/mol

The bond energies for the products are:

C2H3Cl(g): 328 kJ/mol

HCl(g): 432 kJ/mol

We can use these bond energies to calculate the enthalpy change for Equilibrium 2 as follows:

ΔrH = ([C2H3Cl(g)] + [HCl(g)]) - [C2H4Cl2(g)]

ΔrH = (328 kJ/mol + 432 kJ/mol) - 575 kJ/mol

ΔrH = -215 kJ/mol

Therefore, the enthalpy change for Equilibrium 2 is approximately -215 kJ/mol.

Answer:

170.38g is the mass of 1 mole of C₁₂H₂₆

Explanation:

To solve this question we must find the molar mass of the alkane C₁₂H₂₆. The molar mass is defined as the mass of one mole of a substance.

In 1 mole of C₁₂H₂₆ we have 12  moles of Carbon and 26 moles of Hydrogen. With the periodic table of elements we can know the molar mass of 1 mole of Carbon and 1 mole of hydrogen, and, thus, the molar mass of the alkane (Molar mass C = 12.01g/mol, H = 1.01g/mol)

Molar mass C₁₂H₂₆:

12C = 12*12.01g/mol = 144.12g/mol

26H = 26*1.01g/mol = 26.26g/mol

144.12g/mol + 26.26g/mol =

Answer:

Explanation:

july

Answer:

False i think

Answer:

Explanation:

A is solid, b is melting, c is freezing, d is liquid, e is evaporating, g is gas, and f is condensation.

Hello Mikaela!

Let's start from the top, letter G. Letter G should be gas. Letter F should be condensation. Letter E should be evaporation. Letter D should be liquid. Letter C should be freezing. Letter B should be melting. And letter A should be solid.

I really hope this helps!!

Answer:

F' = 3 N

Explanation:

Given that,

Two objects of equal mass have a force of gravity of 6 N between them.

If the mass of one is cut in half and the other stays the same such that,

m₁' = m₁ and m₂' = (m₂/2)

We need to find the new force. The gravitational force between two objects is given by :

[tex]F=G\dfrac{m_1m_2}{r^2}[/tex]

We have, F = 6 N

New force,

[tex]F'=G\dfrac{m_1'm_2'}{r^2}\\\\F'=\dfrac{Gm_1\times \dfrac{m_1}{2}}{r^2}\\\\=\dfrac{1}{2}\times \dfrac{Gm_1m_2}{r^2}\\\\F'=\dfrac{F}{2}\\\\F'=\dfrac{6}{2}\\\\F'=3\ N[/tex]

So, the new force becomes 3 N.

Answer:

D). NADH

Explanation:

Answer:

The correct answer is - 0.0173888 moles.

Explanation:

Aspirin,  C 9 H 8 O 4 , the atomic mass rounded to the nearest whole number, so: c- 12 h- 1 o - 16

now multiply these number by how many of each there are in the formula:

c - 12 x 9 = 108

h - 1 x 8 = 8

0 - 16 x 4 = 64

add these numbers up 108 + 8 + 64 = 180

aspirin has a molar mass of  

180.g mol ^− 1 . This means that one mole of aspirin will have a mass of 180 g .

You're dealing with 3.13 g  of aspirin, which will be equivalent to

3.13 g  /180g

=  0.0173888 moles aspirin

Answer:

carbon and hydrogen

Explanation:

the carbon atoms join together to form the frame work of the compound and the hydrogen atoms attach to them in many different configurations

Answer:

Explanation:

A1. Chemical indicator, any substance that gives a visible sign, usually by a colour change, of the presence or absence of a threshold concentration of a chemical species, such as an acid or an alkali in a solution. An example is the substance called methyl yellow, which imparts a yellow colour to an alkaline solution.

A2. The reaction of an acid with a base is called a neutralization reaction. The products of this reaction are a salt and water. ... For example, the reaction of hydrochloric acid, HCl, with sodium hydroxide, NaOH, solutions produces a solution of sodium chloride, NaCl, and some additional water molecules

A3. Methyl orange has the property to color alkaline and neutral water yellow. If the water becomes acidic, it turns red immediately.

Answer:

Yes.

Explanation:

Yes.

Answer:10-1707

Explanation:

Answer:

2.44×10²³ molecules

Explanation:

From the question given above, the following data were obtained:

Mass of H₂O = 7.30 g

Number of molecules of H₂O =?

From Avogadro's hypothesis:

1 mole of H₂O = 6.02×10²³ molecules

1 mole of H₂O = (2×1) + 16

= 2 + 16

= 18 g

Thus,

18 g of H₂O = 6.02×10²³ molecules

Finally, we shall determine the number of molecules present in 7.3 g of H₂O. This can be obtained as follow:

From Avogadro's hypothesis:

18 g of H₂O = 6.02×10²³ molecules

Therefore,

7.3 g of H₂O = 7.3 × 6.02×10²³ / 18

7.3 g of H₂O = 2.44×10²³ molecules

Thus, 7.3 g of H₂O contains 2.44×10²³ molecules

Answer:

D. Speed up and spread out

Decreasing sunlight will decrease the amount of energy storage molecules in an ecosystem.

This is the process in which green plants manufacture food in the presence of sunlight. Primary producers are involved in this process of providing energy to the ecosystem.

This therefore means that a decrease in sunlight means a decrease in photosynthesis and energy production.

Read more about Photosynthesis here https://brainly.com/question/19160081

#SPJ1

Answer:

1. The product has a higher Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate.

2. False

3. True

Explanation:

In chromatography, there is a stationary phase and a mobile phase. The ratio of the distance moved by a component and the distance moved by the solvent gives the retention factor (Rf).

Since silica gel is a polar solvent, it will retain the more polar product methyl m-nitrobenzoate compared to the methyl benzoate starting material.

In comparing the electrophillic aromatic substitution of m-nitrobenzoate  and methyl benzoate, we must remember that the presence of electron withdrawing groups (such as -NO2 and -CHO) on the aromatic compound deactivates the compound towards electrophillic aromatic substitution hence, methyl m-nitrobenzoate is less reactive than methyl benzoate in Electrophilic Aromatic Substition and Methyl benzoate is less reactive than benzene in Electrophilic Aromatic Substition

The final result has a higher Rf value because the TLC plate has more polarity than the other compound.

The answer to the following question is as follows:-

In chromatography, it is a process that is used to separate the different components on the basis of their votality. The ratio of the distance moved by a component and the distance moved by the solvent gives the retention factor (Rf).

In comparing the electrophilic aromatic substitution of m-nitrobenzoate and methyl benzoate, we must remember that the presence of electron-withdrawing groups on the aromatic compound deactivates.

The compound towards electrophilic aromatic substitution hence, methyl m-nitrobenzoate is less reactive than methyl benzoate in Electrophilic Aromatic Substitution and Methyl benzoate is less reactive than benzene in Electrophilic Aromatic Substitution.  

For more information, refer to the link:-

https://brainly.com/question/15804584

Answer:

Global wind patterns

Ocean currents

Global climates

Explanation:

Edge2021 correct

The factors that were affected by the breakup of the supercontinent Pangaea include global wind patterns, ocean currents, and global climates.

The Pangea was a super-landmass that originally gave rise to all continents on the Earth planet.

According to the theory of continental drift, the Pangea break up millions of years ago to generate the continents.

This theory (continental drift) has been replaced by the tectonic plate model, but the idea of Pangea has still support in the scientific community.

In conclusion, the factors that were affected by the breakup of the supercontinent Pangaea include global wind patterns, ocean currents, and global climates.

Learn more about the Pangea here:

https://brainly.com/question/1557027

Answer:

14

Explanation:

Step 1: Calculate the moles corresponding to 25 g of Ba(OH)₂

The molar mass of Ba(OH)₂ is 171.34 g/mol.

25 g × 1 mol/171.34 g = 0.15 mol

Step 2: Calculate the molar concentration of Ba(OH)₂

Molarity is equal to the moles of solute divided by the liters of solution.

[Ba(OH)₂] = 0.15 mol/0.250 L = 0.60 M

Step 3: Calculate the molar concentration of OH⁻

Ba(OH)₂ is a strong base according to the following equation.

Ba(OH)₂ ⇒ Ba²⁺ + 2 OH⁻

The molar ratio of Ba(OH)₂ to OH⁻ is 1:2. The molar concentration of OH⁻ is 2/1 × 0.60 M = 1.2 M.

Step 4: Calculate the concentration of H⁺

We will use the ionic product of water expression.

Kw = 1.0 × 10⁻¹⁴ = [H⁺] × [OH⁻]

[H⁺] = 1.0 × 10⁻¹⁴/[OH⁻] = 1.0 × 10⁻¹⁴/1.2 = 8.3 × 10⁻¹⁵ M

Step 5: Calculate the pH of the solution

We will use the definition of pH.

pH = -log [H⁺] = -log 8.3 × 10⁻¹⁵ = 14

Answer:

Bubbling can indicate a chemical reaction

Explanation:

Chemical reaction takes place with the beginning of bubbles and foam when hydrogen peroxide is put onto an open wound. This compound does not only heal the wound but also damages the body as it also kills the nearby healthy cells.

Chemical reaction is a process which leads to chemical transformation of a chemical substance into another.

Hydrogen peroxide bubbles when it comes into contact with an enzyme called catalase. Most of the cells in the body contain catalase enzyme, so whenever the tissue is damaged, the enzyme catalase is released from the cell and it becomes available to react with the peroxide ion.

Hydrogen peroxide applied on a cut produces a white, fizzling foam which is actually a sign that the solution is killing the bacteria as well as the healthy cells around it.

Learn more about Chemical reaction here:

https://brainly.com/question/3461108

#SPJ2