Explanation:
w = (4.52 ± 0.02) cm, x = ( 2.0 ± 0.2) cm, y = (3.0 ± 0.6) cm. Find z = x + y - w and its uncertainty.
z = x + y - w = 2.0 + 3.0 - 4.5 = 0.5 cm
Dz = Dx + Dy + Dw = 0.2 + 0.6 + 0.02 = 0.82 rounding to 0.8 cm
So z = (0.5 ± 0.8) cm
Solution with standard deviations, Eq. 1b, Dz = 0.633 cm
z = (0.5 ± 0.6) cm
Notice that we round the uncertainty to one significant figure and round the answer to match.
what phase change occurs as the substance at .75 atm is heated from 0 C to 25 C
Please if someone knows the answer please help
What is electric magnetism?
Answer:
the physical phenomenon produced by moving electric charge
Explanation:
Answer:
a maget can attract if n+s=con,not n+n=con or s+s=con
how did the discovery of eris force astronomers to reconsider the definition of planet?
Answer:
Explanation:
They had demoted Pluto on the basis of the discovery of Eris. They also discovered that Eris had a moon. It was thought to be much bigger than Pluto. That turned out not to be true. So having accepted Eris as a planet, they had to consider carefully what to do about Pluto. It has a gravitational constant of 0.82 m/s^2 which is 8.4% of that of our gravitational pull. and slightly more than Pluto.
Later data showed that these two objects in space were more like twins and that's what shook up the definition of a planet. You can't demote one and not the other.
the magnetism of a permanent magnet results from __________.
Answer:
Explanation:
The magnetism of a permanent magnet results from the magnetic moments of electrons in the material making up the magnet interactions with Earth's magnetic field the magnetic moments of nuclei in the material making up the magnet electric currents inside the magnet.
please help the picture is above !
Answer:
its C- 20
Explanation:
Why do we use silk threads to suspend charged rods instead of metallic threads?
Answer:When you rub the glass rod with the silk, the rod charges positive. If you place a charged rod on one of the swivel stands, and then bring another charged
Explanation: i no it
A laser emits a light beam with a wavelength of 630 nm. The jet passes a liquid with a refractive index of 1.3.
What is the wavelength of the light beam in the liquid?
What did Dr Allan McInnes say was required in order to launch a satellite into space, at the necessary altitude and speed? What is required and why?
Use the picture to answer the question.
Name at least three physical properties of the bowling
ball.
1
Answer:
I need the picture to amswer the question thay's why it says " "
Explain how the basic unit are combined to give the derived units of force, velocity, pressure and work
Velocity:
Velocity is change in displacement with respect to time:
[tex]\frac{\Delta x}{\Delta t}[/tex]
Analysing the units, meters (displacement) and seconds (time) are basic units:
[tex]\frac{m}{s}[/tex]
Therefore the unit of velocity is m/s
Force:
Newton's second law of motion:
[tex]F = ma[/tex]
Kilogram (mass) is a basic unit, and accelerations unit can be found using the equation:
[tex]a=\frac{\Delta v}{\Delta t}[/tex]
Analysing the units:
[tex]\frac{\frac{m}{s}}{s}=\frac{m}{s^2}[/tex]
Therefore, the unit of force is:
[tex]kg\frac{m}{s^2}[/tex]
Pressure:
Pressure is given by the equation:
[tex]P=\frac{F}{S}[/tex] where S is area of effect, F is force
Area for a basic rectangle (geometric shape is arbitrary for dimensional analysis) is found by multiplying two lengths:
[tex][l^2]=m^2[/tex], the unit of area
Dividing the aforementioned unit of force by the unit of area:
[tex]\frac{kg\frac{m}{s^2}}{m^2}=\frac{kg}{ms^2}[/tex], the unit of pressure
Work:
Work is given by the equation:
[tex]W=\vec{F}\cdot \vec{x}[/tex], (dot product may be assumed as normal multiplication for the purposes of unit analysis)
Knowing displacement's (x) unit is m:
[tex][W]=\frac{kgm}{s^2}m=\frac{kgm^2}{s^2}[/tex], the unit of work.
I need help asap please
Will give BRAINLIST for correct answers only
Thank you
A force of 225 N at an angle of 30 degrees to the horizontal displacement. The component of the force that will cause work to be done is?
Answer:
225cos30
Explanation:
Force in the direction of the work done
If the mass of an object is 176 and Net force is 50, what would be the Acceleration?
Answer:
0.28m/s²
Explanation:
Force = mass•acceleration
F = m•a
50 = 176•a Divide both sides by 176:
50/176 = a ≈ 0.28 m/s²
Describe the relationship between the state of matter of water (gas, liquid, solid) and the motion of the water molecules.
Answer:
ok
Explanation:
solid- molecules are close together and vibrating
liquid - molecules are loser, faster moving and take the shape of its container
gas- fast moving molecules and take whatever shape they want (like a room or the air outside)
Explanation:
Solids: The inter-molecular attraction force is the highest and the inter-molecular distance is the least. Solids have definite shape and volume.
Liquids: The inter-molecular attraction force is less than that of solids and the inter-molecular distance is more than solids. Liquids have definite volume but no definite shape.
Gases: The inter-molecular attraction force is the least and the inter-molecular distance is the highest. Gases have no definite shape or volume.
You push the sofa across the floor. Which force is NOT present on the sofa?
a)gravity
b)normal
c)tension
d)applied
Answer:
c) tension ........ ........
Answer:
gravity
Explanation:
because it cannot be move across if there is present gravity force
Identify some sports or activities you can do to improve your overall health and explain how physical activity can improve your
Answer:
soccer
Explanation:
soccer can inprove your health because you use all parts of your body playing it. You use your legs because you are running and you use your arms for doing throw ins. Soccer is also good for you because you are not playing for too long. Usually one soccer game is only 1 hour.
Hope this helps
jane pushed a box with 15 N force (an action) what force does the box have on Jane? which law is this?
Answer:
This is Newton’s third law (forces due to friction). There would be 15N being pushed back at Jane.
Explanation:
Newton’s third law states that for every action there is an equal and opposite reaction. So if Jane pushed with a force of 15N, 15N would be pushed back at her. Hope this helps! :)
A cannon is fired with an initial horizontal velocity of 20 m/s and initial vertical velocity of 25 m/s. After 3s in the air, the canon hits it’s target. How far away(in meters) was the canon from its target? Answer:_____m
Answer:
60 m
Explanation:
After 3 seconds of travel at 20 m/s, the projectile is 3·20 = 60 meters horizontally from the cannon.
__
The vertical height after 3 seconds is 0.9 m, so the straight-line distance from cannon to target is √(60^2 +0.9^2) ≈ 60.007 meters.
white light such as that from the sun is actually only ultraviolet light.?
Answer:
no
Explanation:
White light, which is the visible light, from the sun contains all the rainbow colors; however, ultraviolet is a radiation emitted from the sun and it is nonvisible to humans.
No white light and ultraviolet light are the two types of radiation coming from the sun.
What are solar radiations?The light coming from the sun contains different types of radiation that travel at different wavelengths this radiation is called solar radiation.
Types of solar radiation are visible light, ultraviolet light, infrared, radio waves, X-rays, and gamma rays.
Due to this visible light, we can see on earth because it has the frequency that our eyes can see.
visible light contains seven colors that are at different wavelengths. So when the diffraction of visible light takes place we can see these seven colors.
Thus white light and ultraviolet light are the two types of radiation coming from the sun.
To know more about Visible light follow
https://brainly.com/question/10728818
When you describe a liquid as thick, are you saying that it has a high or a low viscosity?
The liquid with greater thickness will be more viscous since it flow speed is lower. Therefore, the more thick liquids is more viscous and flow slowly.
What is viscosity ?Viscosity of a liquid is the resistance to its flow. Viscosity depends on the density and thickness of the liquid. The more thicker the liquid the more viscous it will be.
Less thick liquids will flow fastly. For example water is a less viscous liquid as we see it flow so quickly. Whereas, honey, oil, etc are more viscous and the mobility of their liquid particles are resisted by viscosity.
The more viscous liquids generally has higher specific heat capacity as in the case of water and oil. The particle - particle attractive force is higher in highly viscous liquids.
Find more on viscosity:
https://brainly.com/question/13385698
#SPJ2
why is the saturated lapse rate less than the dry adiabatic lapse rate?
Answer:
(Hope this helps can I pls have brainlist (crown)☺️)
Explanation:
Lifting a saturated package causes it to expand and cool, resulting in vapour condensation. Condensation will release latent heat, partially counteracting the cooling. As a result, a saturated parcel's adiabatic lapse rate is smaller than an unsaturated parcel's.
Because moist air ascending condenses off its water vapour, the moist adiabatic lapse rate is lower than the dry adiabatic lapse rate (once saturation is attained). The air is considered to be saturated when the dew point temperature and air temperature are identical.
A driver started from origin and drove 5 km towards east, he then drove 3 km due west. His displacement is:
a. 2 km
b. 8 km towards east
c. 2 km towards east
d. 8 km
Answer:
c. 2 km towards east
Explanation:
Guide Questions:
1. What is the speed of sound at the lowest temperature? __________________
2. What is the speed of sound at the highest temperature? _________________
3. At which temperature the speed of sound slowest? _____________________
4. At which temperature the speed of sound fastest? _____________________
5. Does temperature affect the speed of sound? Explain ___________________
Answer:
1- 330.4m/s
2-358.0m/s
3- -1c
4- 45c
5- when temperature increase speed of sound will increase
1. The speed of sound at the lowest temperature in the image is 330.4 m/s.
2. The speed of sound at the highest temperature in the image is 358.0 m/s.
3. The temperature at which the speed of sound is slowest is -1°C.
4. The temperature at which the speed of sound is fastest is 45°C.
5. Yes, temperature affects the speed of sound.
The image shows the relationship between temperature and speed of sound in air. The x-axis of the graph shows the temperature in degrees Celsius, and the y-axis shows the speed of sound in meters per second. The line on the graph shows that the speed of sound increases with temperature. For every 1 degree Celsius increase in temperature, the speed of sound increases by about 0.6 m/s.
The speed of sound in air is also affected by other factors, such as humidity and air pressure. However, temperature is the most important factor affecting the speed of sound.
The speed of sound at the lowest temperature in the image is 330.4 m/s, which is at -1°C.
The speed of sound at the highest temperature in the image is 358.0 m/s, which is at 45°C.
The temperature at which the speed of sound is slowest is -1°C.
The temperature at which the speed of sound is fastest is 45°C.
Yes, temperature affects the speed of sound. The speed of sound increases with temperature. This is because the molecules of a medium vibrate faster at higher temperatures, and this allows sound waves to travel more quickly.
To know more about speed here
https://brainly.com/question/6280317
#SPJ3
Using your knowledge of momentum explain why cars are designed to have crumple zones?
Answer: I think cars are designed to have crumble zone because lets say you're going 60-70 mph and you hit a brick wall that cant move, it would be a very hard jolt causing the beings inside to get thrown forward, but if it has a crumble zone it would slow the the jolt from is slowing down in the hit.
I NEED A 100% ACCURATE ANSWER FOR THIS QUESTION ASAP NO LINKS !!!
Answer:
The answer is static friction. This is the friction that involves objects that do not move.
Explanation:
Friction is a force which opposes the motion of one object moving relative to another. static friction and kinetic friction are the two type of friction.
Static friction is that type of friction which keeps an object at rest. Force must be applied greater than static friction to move an object. Therefore it is the static friction which helps the pile of rocks from falling apart.
(Brainiest and thanks appreciated)
Answer:
static friction
Explanation:
I did a test like this yesterday same question different object
In a closed system of a cannon and cannonball, which changes would both result in an increase in the kinetic energy of the cannonball when fired from the cannon?
Answer:
the length of the cannon
the power of the gunpowder
Answer:
i would say B decrease mass of cannon or decrease mass of cannon ball
Explanation:
because when you fire the cannon the cannon ball and powder exit the cannon then that leaves the cannon ball and i would say that the explosion would force it out the cannon but would not increase its mass.
Angelica has sprained her ankle and needs to stay off it for a few weeks, which is really frustrating because she is on the track team. She is worried that a prolonged period of inactivity will hurt her training. After about 10 days, she thinks that she can start working out gradually if she takes painkillers right before her workout. What is the BEST response to Angelica?
OPTIONS:
A.
She could really injure herself with this plan since she will not feel pain.
B.
Trying it once or twice and seeing how she feels is probably the best way to go.
C.
It is a common technique and lots of athletes practice injured so she will be fine.
D.
The damage from working out is probably less than the issue exercise will create.
PLEASE NO LINKS
Answer:
I think the answer is c
Explanation:
Because It is a common technique and lots of athletes practice injured so she will be fine.
By working on the given plan, Angelica can injure herself since she will not feel pain. The correct option is A.
What is ankle sprain?A sprain takes place when your ankle is compelled to move out of its regular place, causing one or more of the ligaments in your ankle to stretch, partially tear, or completely tear.
A sprained ankle can be caused by a fall that causes your ankle to twist. Landing on your foot awkwardly after jumping or pivoting.
You should avoid strenuous exercises, such as running, until the pain and swelling have subsided, but you should keep moving so that the muscles and ankle do not stiffen. Once your ankle is less painful, begin some gentle exercises.
As she is having ankle sprain, and she is planning to take pain killers and start to work out, this can cause her even more problem as she will not feel any pain.
Thus, the correct option is A.
For more details regarding sprain, visit:
https://brainly.com/question/1079366
#SPJ5
what if water didnt have a negative charge?
what is heliocentric model?
Answer:
A model of the solar system with the sun in the middle
Explanation:
A 63 kg boy and sled are pulled along level ground with a force of 577 N. The boy and sled
are moving at a constant velocity of 2.4 m/s. What is the size of the frictional force?
Answer:
The size of the frictional force is 577 N.
Explanation:
What is frictional force?Frictional forces are exerted every time you have two surfaces sliding across one another. Friction depends on:
how rougher are the surfaces on contact;how harder you push one surface to the other.There are two types of friction:
static friction [tex]f_s[/tex];dynamic (sliding) friction [tex]f_d[/tex].Now let's attack the problem:
First, you have to write the data down:
[tex]\bullet \quad m= 63\,kg\\\\\bullet \quad F= 577\,N\\\\\bullet \quad v= 2.4\,m/s[/tex]
If the boy and the sled moves on constant velocity, Newton's First Law Of Motion states that the net force acting on them must be zero:
[tex]F_{net}=0[/tex]
Applying Newton's Second Law Of Motion, we get:
[tex]F-f_d=0[/tex]
which means that:
[tex]F=f_d[/tex]
In other words, the dynamic frictional force equals the force that moves the boy and sled. So we may write:
[tex]\boxed{f_d=577\,N}[/tex]
Conclusion: the size of the (dynamic) frictional force is 577 N.
Happy studying!
Brainly Team