[H] = 1.00 x 10^-7 M

a. Acidic
b. Basic
c. Neutral

Answer:

W = 615.91 kJ

Explanation:

We need to use the following expression:

W = ΔG° * mol   (1)

But in order to determine the ΔG° we need the following expression:

ΔG° = -n * F * E°   (2)

Where F is a constant and is 96,500 J/V mol

n is the number of transferred electrons in the reaction. As we are passing from Al to Al³⁺ we can say that the number of electrons are 3.

Finally to get the moles, we need the the atomic weight of aluminum which is 26.98 g/mol, so the moles:

moles = m/MM   (3)

Let's calculate the moles of aluminum:

moles = 50 / 26.98 = 1.85 moles of aluminum

Now let's calculate the gibbs energy using (2):

ΔG° = -3 * 96,500 * 1.15

ΔG° = -332,925 J or simply -332.925 kJ/mol

Finally, using (1) we can determine the work done:

W = 332.925 * 1.85

Hope this helps

The maximum work available from 50.0 g of aluminum in the following cell when the cell potential is 1.15 V will be 615.91 kJ

The cell potential, Ecell, is the measure of the potential difference between two half cells in an electrochemical cell.

Expression for work done ;

W = ΔG° x mol   (1)

But, to determine the ΔG°

ΔG° = -n x F x E°   (2)

Where,

(As there is variation from Al to Al³⁺ the change in number of electrons are 3)

To get the moles,

moles = m/MM  (3)

moles = 50 / 26.98 = 1.85 moles of aluminum

Now,

ΔG° = -3 x 96,500 x 1.15

ΔG° = -332,925 J  

       = -332.925 kJ/mol

Now, using (1) we can determine the work done:

W = 332.925 x 1.85

W = 615.91 kJ

Hence, The maximum work available from 50.0 g of aluminum in the following cell when the cell potential is 1.15 V will be 615.91 kJ

Learn more about work done here ;

https://brainly.com/question/26622905

#SPJ5

Answer:

22.67 L of PH₃

Explanation:

The balanced equation is:

[tex]P_4 (s) + 6H_2(g) \to 4PH_3(g)[/tex]

From the equation:

[tex]34 L \times \dfrac{1 \ mol \ of H_2 }{22.4 \ L \ H_2} \times \dfrac{4 \ mol \ of \ PH_3}{6 \ mol \ H_2} \times \dfrac{22.4 \ L \ PH_3}{1 \ mol \ PH_3}[/tex]

= 22.67 L of PH₃

Answer:

just awser

eeww

Explanation:

Explanation:

As I think Option C is correct i.e. NH4+.

Answer:

https://www.chegg.com/homework-help/questions-and-answers/1-10-points-solution-15-percent-mass-kcl-benzene-new-boiling-point--901-c-b-921-c-c-821-c--q63751186

Explanation: Thats your answer

Answer:

AFAIK

Explanation:

uric acid is much less toxic than ammonia, hence bigger concentrations of it are tolerated in the body. This means you can excrete it while excreting very little water - beneficial wherever water's not abundant.

There's a tradeoff though, uric acid requires more energy to synthesize than ammonia, so pretty much all fish, say, excrete ammonia rather than uric acid - it's no problem to dilute ammonia since there's no water shortage.

[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]

45° Celsius

Formula (113°F − 32) × 5/9 = 45°C

Given :

For a chemical reaction, the activation energy for the forward reaction is +181 kJ and the activation energy for the backward reaction is +62 kJ.

To Find :

The overall energy change for the forward reaction.

Solution :

The overall energy change for the forward reaction is :

[tex]\Delta E_f = E_f - E_b\\\\\Delta E_f = 181 - 62 \ Kj\\\\\Delta E_f = 119 \ Kj[/tex]

Therefore, the overall energy change for the forward reaction is 119 Kj.

Answer:

25.42 grams

Explanation:

The specific heat of water is 4.18 J/g •°C, so that means that it takes 4.18 joules of energy to raise one gram of water 1 °C.

Change in temp = 55 - 15 = 40°C

So we can calculate how much energy it would take to raise the temp of one gram of water by one degree using the following

(4.18 J/g•°C) * (40°C) * (1 gram) = 167.2 J

So if it takes 167.2 J of energy to raise on gram of water 40°C, we now we can calculate the amount of grams of water that can heated with 4250 J of energy

(4250 J) ÷ (167.2 J) = 25.42 grams of water can be heated from 15°C to 55°C

Answer: Salt is an ionic compound.

Explanation:

A compound formed by transfer of electrons from one atom to another is called an ionic compound.

For example, chemical formula of salt is NaCl (also called table salt).

Salt is formed when sodium (atomic no. 11) donates its one valence electron to chlorine (atomic no. 17). As a result, sodium ion and chlorine ion chemically combine together and form the compound NaCl.

Thus, we can conclude that salt is an ionic compound.

Answer: The mass in grams of potassium chloride required to prepare this solution is 1.862 grams

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n = moles of solute

[tex]V_s[/tex] = volume of solution in ml

moles of [tex]KCl[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{xg}{74.5g/mol}[/tex]

Now put all the given values in the formula of molality, we get

[tex]0.100=\frac{x\times 1000}{74.5g/mol\times 250.0ml}[/tex]

[tex]x=1.862g[/tex]

Therefore, the mass in grams of potassium chloride required to prepare this solution is 1.862 grams

Answer:

Option C, an increase of reaction rate with increase in temperature

Explanation:

Colligative properties are as follows

a) Decrease of  vapor pressure

b) Increase of boiling point

c) Reduction of freezing point

d) Increase of osmotic pressure

There is no impact on reaction rate and hence it is not a colligative property.

Thus, option c is the right choice

An increase of reaction rate with increase in temperature isn't an example

of colligative properties of solutions

Colligative properties of solutions depend on the ratio of the number of

solutes to that of the solvent(concentration) and not on the nature of the

substances involved.

Examples of colligative properties include vapor pressure lowering, boiling

point elevation, freezing point depression, and osmotic pressure. Increase of

reaction rate with increase in temperature is therefore not an example of

colligative properties of solutions.

Read more on https://brainly.com/question/24260365

Answer:

Explanation:

Answer:

Explanation:

The number of electrons in the outermost shell of a particular atom determines its reactivity, or tendency to form chemical bonds with other atoms.

Answer:

V₂ = 4.00 L

Explanation:

Given that:

Volume (v1) = 6.00 L

Temperature (T1) = 300 K

Pressure (P1) = 1.00 atm

VOlume (V2) = unknown???

Temperature (T2) = 600 K

Pressure (P2) = 3.00 atm

Using combined gas law equation:

[tex]\dfrac{P_1V_1}{T_1}= \dfrac{P_2V_2}{T_2}[/tex]

[tex]\dfrac{1 \times 6}{300} = \dfrac{3 \times V_2}{600}[/tex]

[tex]\dfrac{1}{50} = \dfrac{1 \times V_2}{200}[/tex]

200 = 50V₂

V₂ = 200/50

V₂ = 4.00 L

Explanation:

Intermolecular forces hold multiple molecules together and determine many of a substance's properties. All of the attractive forces between neutral atoms and molecules are known as van der Waals forces, although they are usually referred to more informally as intermolecular attraction.

Intermolecular forces are the forces of attraction or repulsion which act between neighboring particles (atoms, molecules, or ions ). These forces are weak compared to the intramolecular forces, such as the covalent or ionic bonds between atoms in a molecule.

Answer:

number of moles of (N) = 0.794 moles

Explanation:

From the given information:

no of moles of nitrogen (N) = (unknown)???

mass of nitrogen = 13.5 g

molar mass of NH3 = 14 +( 1 × 3) = 17 g/mol

To calculate the no of moles of N, we have:

number of moles of (N) = mass of N/molar mass

number of moles of (N) = 13.5 g/17 g/mol

number of moles of (N) = 0.794 moles

Answer:

C

Explanation:

A-T G-C

Answer:

C

Explanation:

EDGE 2022

Answer: Anode: [tex]Pb+SO_4^{2-}\rightarrow PbSO_4+2e^-[/tex]

Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]

Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]

Explanation:

Lead storage battery is a secondary cell used in automobiles and invertors. The anode is made up of lead and undergoes oxidation during discharging and cathode is made up of lead oxide and acts as cathode during discharging. The electrolyte used is dilute .

Lead storage battery acts as electrochemical cell while discharging.

Discharging reaction for  Anode:

Discharging reaction for  Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]

Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]

A lead storage battery is an energy storage device. At the anode lead and sulfate ion reacts to produce Lead(II) sulfate and release two electrons.

In secondary cells or the recharge-discharge cells during recharge, the positive electrode is the anode, while during discharge cathode is the positive electrode.

The anode (lead) of the cell undergoes an oxidation reaction during the discharge, whereas the lead oxide or the cathode undergoes reduction.

The discharging reaction at the anode of the cell is given as,

[tex]\rm Pb + SO_{4}^{2-} \rightarrow PbSO_{4} + 2e^{-}[/tex]

The discharging reaction at the cathode of the cell is given as,

[tex]\rm PbO_{2} + 4H^{+} + SO_{4}^{2-} + 2 e^{-} \rightarrow PbSO_{4} + 2H_{2}O[/tex]

The overall cell reaction is given as,

[tex]\rm Pb + 2SO_{4}^{2-} + PbO_{2} + 4H^{+} \rightarrow 2PbSO_{4} + 2H_{2}O[/tex]

Therefore, the gain and loss of electrons are represented at the cathode and the anode of the cell.

Learn more about discharge battery here:

https://brainly.com/question/8341588

Answer:

The heat of reaction is the energy that is released or absorbed when chemicals are transformed in a chemical reaction. It describes the change of the energy content when reactants are converted into products.

Explanation:

Yeah, that would confuse me a bit but then you read it and then you will get that answer above! Have a great rest of your day!

Answer:

konduktor

- ang konduktor ay maaaring isang konduktor nga koryente, train o isang taong namumuno sa isang orkestra o isang grupo ng mga mang-aawit.

piloto

-isang tao na tagalipad ng ereplano

drayber

- isang tao na nagmamaniho ng sasakyan

makinista

-ay isang tao na nagpapakilos o nagpapagana ng makina

please give me brainliest.

Answer:

it would be Convection.

Answer:

Option C is the answer

Butene, also called Butylene, 4 isomeric compound belonging to the series of olefinic hydrocarbons. The chemical formula is C4H8, option c is correct.

Butene, also called Butylene, four isomeric Combinations belong to the series of olefinic hydrocarbons. The chemical formula is C4H8.

The isomeric forms are 1-butene, cis-2-butene, trans-2-butene, and isobutylene.

Thus, option "C" is correct. the chemical formula is C4H8.

To learn more about Butene click here:

https://brainly.com/question/13186233

Answer:

₰₮₤₳V₤

Explanation:

First you must calculate the number of moles in this solution, by rearranging the equation. No. Moles (mol) = Molarity (M) x Volume (L) = 0.5 x 2. = 1 mol.

For NaCl, the molar mass is 58.44 g/mol. Now we can use the rearranged equation. Mass (g) = No. Moles (mol) x Molar Mass (g/mol) = 1 x 58.44. = 58.44 g.

Answer: A chemical change occurs when the substance's composition is changed. When bonds are broken and new ones are formed a chemical change occurs.