Help Please! 5 questions for 25 points? seems fair? Thank you!

Answer:

The torque necessary to bring the wheel to rest in 40 seconds is 10.4 N·m

Explanation:

The question is with regards to rotational motion

The rotary motion parameters are;

The mass of the wheel = 50 kg

The radius of the wheel = 0.4 m

The rate of rotation of the wheel = 480 rpm

The time in which the wheel is to be brought to rest = 40 s

The rotational rate of the wheel in rotation per second is given as follows;

480 r.p.m = 480 r.p.m × 1 minute/(60 seconds) = 8 revolution/second

1 revolution = 2·π radians

Therefore, we have the angular velocity, ω, given as follows;

ω = 2·π × 8 revolutions/second ≈ 50.3 rad/s

The angular acceleration, α, is given as follows;

[tex]\alpha = \dfrac{\Delta \omega}{\Delta t} = \dfrac{\omega _2 - \omega_1}{t_2 - t_1}[/tex]

Whereby the wheel is brought to rest from its initially constant rotational motion in 40 seconds, we have;

ω₁ ≈ 50.3 rad/s, ω₂ = 0 rad/s, and t₂ - t₁ = 40 seconds

Plugging in the values for the variables of the equation for the angular acceleration, "α", we get;

[tex]\alpha = \dfrac{0 - 50.3 \ rad/s}{40 \ s} \approx 1.3 \ rad/s^2[/tex]

The torque on the wheel, τ, is given as follows;

τ = m·r²·α

Where;

m = The mass of the object = 50 kg

r = The radius of the wheel = 0.4 m

α = The acceleration of the wheel ≈ 1.3 rad/s²

Therefore;

τ = 50 kg × (0.4 m)² × 1.3 rad/s² ≈ 10.4 N·m

The torque necessary to bring the wheel to rest in 40 seconds = τ ≈ 10.4 N·m.

Answer:

-10.048 N m

Explanation:

Answer:

property of low melting point

Explanation:

When too much current flows through the low resistance element of the fuse, the element melts and breaks the circuit

Answer: impulse and momentum

Explanation:

Impulse and momentum-  two quantities can be expressed using the same units. Hence, option (4) is correct.

In physics, the term "impulse" is used to characterize or measure the impact of force operating gradually to alter an object's motion. It is often stated in Newton-seconds or kilograms per second and is denoted by the symbol J.

Because a body with momentum cannot be halted, it must be forced to move in the opposite direction for a predetermined amount of time. The harder it is to stop, the more momentum there is. Consequently, more force must be applied and more time must be spent to stop the body.

Mathematically,

impulse = force· time

= mass × acceleration × time

= mass × ( change in velocity/time) × time

= mass ×  change in  velocity

=  change in momentum.

Hence, both Impulse and momentum have same unit.

Learn more about impulse here:

https://brainly.com/question/16980676

#SPJ2

Answer:

Explanation:

When the mass

m

is being accelerated with an acceleration of

a

,we can say the net force acting in the direction of acceleration is

F

=

m

a

here,it is given that only one force

F

was applied to cause this acceleration, and also given,

m

=

2

K

g

,

a

=

2

m

s

−

2

So,

F

=

2

⋅

2

=

4

N

Answer:

4N

Explanation:

given formula solution

m=2kg F=ma F=2kg×2m/s^2

a=2m/s^2 =4N

Answer:

[tex]V_{B/A}=2i+2k[/tex]

Explanation:

The relative velocity can be calculated by means of the difference between vector B minus vector A.

[tex]V_{A}=i+2j-3k\\V_{B}=3i+2j-k\\V_{B}-V_{A}=(3-1)i + (2-2)j+(-1-(-3))k\\V_{B/A}=2i+2k[/tex]

Answer:

4m

Explanation:

800/200

Answer:

B

Explanation:

objects are conductors with unbalanced charges

Answer:

D & A

Explanation:

Answer:

Chemical energy is converted to thermal energy and electrical energy.

Explanation:

Answer:

Which identifies the energy transformations that take place in Anna’s body as this process takes place?

Mechanical energy is converted to kinetic energy, which is then converted to potential energy.

*******Chemical energy is converted to thermal energy and electrical energy. *******CORRECT*******

Electrical energy is converted to chemical energy and thermal energy.

Mechanical energy is converted to potential energy which is then converted to kinetic energy.

Explanation:

Feb 2021 Edge 100% test

Answer:

B

Explanation:

Speed is distance divided by time.

Answer:

50 Mph.

Explanation:

According to the National Severe Storms Laboratory, winds can really begin to cause damage when they reach 50 mph. But here’s what happens before and after they reach that threshold, according to the Beaufort Wind Scale (showing estimated wind speeds): - at 19 to 24 mph, smaller trees begin to sway.

Answer:

470.4N

Explanation:

Given parameters:

Mass of the skydiver = 48kg

Unknown:

Force she exerts as she is falling to the ground  = ?

Solution:

The force she exerts while falling to the ground is her weight;

    Weight  = mass x acceleration due to gravity

Acceleration due to gravity  = 9.8m/s²  

  Weight  = 48 x 9.8  = 470.4N

Answer:

C. Contour Farming

Answer:

Electrical force is directly proportional to the product of the charges on the two objects.

Explanation:

The electric force between two charges is given by :

[tex]F=\dfrac{kq_1q_2}{d^2}[/tex]

Where

k is electrostatic constant

q₁ and q₂ are charges

d is the distance between charges

It can be very clear that the electric force is directly proportional to the product of charges and inversely proportional to the square of the distance between them.

Hence, the correct option is (a) "Electrical force is directly proportional to the product of the charges on the two objects".

can you please show a picture

Answer:

I think it's B, not quite sure tho.

Answer:

2.71 m/s

Explanation:

Apply the formula for cosine of an angle where;

The hypotenuse is the speed the hawk dives towards the ground : 3.31 m/s

The angle of direction of motion from the horizontal is : 35°

Speed of the shadow along the ground will be, A ;

Cosine 35° = A / 3.31

A= 3.31 cosine 35°

A= 2.71 m/s

Answer:

The new force is 2/3 of the original force

Explanation:

Coulomb's Law

The electrical force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between the two objects.

Written as a formula:

[tex]\displaystyle F=k\frac{q_1q_2}{d^2}[/tex]

Where:

[tex]k=9\cdot 10^9\ N.m^2/c^2[/tex]

q1, q2 = the objects' charge

d= The distance between the objects

Suppose the first charge is doubled (2q1) and the second charge is one-third of the original charge (q2/3). Now the force is:

[tex]\displaystyle F'=k\frac{2q_1*q_2/3}{d^2}[/tex]

Factoring out 2/3:

[tex]\displaystyle F'=\frac{2}{3}k\frac{q_1*q_2}{d^2}[/tex]

Substituting the original force:

[tex]F'=\frac{2}{3}F[/tex]

The new force is 2/3 of the original force

Answer:

Answer: The angle between force and displacement should be θ = 90° for minimum work. The angle between force and displacement should be θ = 0° for maximum work.

Answer:

If the sun's mass were to double without pushing or pulling on the Earth, then the Earth's orbit will change to an ellipse which brings it out to our current radius but spends most of its time closer to the sun. The tides would probably get even stronger then, particularly when our orbit takes us closer to the sun.

Explanation:

Answer:

Its obviously number D

Explanation:

When it comes to environmental benefit, Reducing emission of pollutants does the best job.

Reduced emission of pollutants is a potential environmental benefit of adopting a new technology.

The elements, molecules, and particles that contribute to pollution are known as pollutants; life can be injured by exposure to these substances, and their impacts on people and plants are widely documented.

There are several ways that pollutants can enter the environment, both naturally and through human activity.

Depending on the type of pollution, what happens to it once it is released into the air, soil, or water supply.

Therefore, Reduced emission of pollutants is a potential environmental benefit of adopting a new technology.

To learn more about pollutants, refer to the link:

https://brainly.com/question/28519286

#SPJ2

Answer:

[tex]4\:\mathrm{m}[/tex]

Explanation:

The formula for work is given as [tex]W=F\Delta x[/tex] where [tex]F[/tex] is force applied and [tex]\Delta x[/tex] is displacement.

Rearranging this equation, we have:

[tex]\Delta x=\frac{W}{F}[/tex].

Plugging in given values, we get:

[tex]\Delta x=\frac{W}{F}=\frac{320}{80}=\fbox{$4\:\mathrm{m}$}[/tex].

Answer:

The answer is 4m

Explanation:

hope this helps!

Answer:

Hand ball ?

Explanation:

Answer:

B. 7

Explanation:

Fluorine has 7 valence electrons in its orbitals.

The valence electrons are electrons in the outermost shell of an atom. Every element has a certain amount of valence electrons.

Answer:

7

Explanation:

Answer:

Vf = final velocity = 1.96 [m/s]

Explanation:

To solve this problem we must use the following equation of kinematics.

[tex]v_{f}^{2}=v_{o}^{2}-2*g*x[/tex]

where:

Vf = final velocity [m/s]

Vo = initial velocity = 9.98 [m/s]

g = gravity acceleration = 9.81 [m/s²]

x = vertical distance [m]

[tex]v_{f}^{2}=(9.98)^{2}-2*9.81*4.88\\v_{f}^{2} = 99.6-95.74\\v_{f}=\sqrt{3.8544}\\v_{f}=1.96[m/s][/tex]

Note: The negative sign of the gravity acceleration means that the gravity acceleration is pointing in the opposite direction of the movement.

Answer:

KITTEEENNSSSSS last one is what i got for critsmas KlikBot Hexagon Special Pack

Explanation:

Answer:

They have the highest melting point so that mean that the temperature and the are a conductive to electricity.

Explanation:

Answer:

An electromagnet is a magnet that runs on electricity. Unlike a permanent magnet, the strength of an electromagnet can easily be changed by changing the amount of electric current that flows through it. The poles of an electromagnet can even be reversed by reversing the flow of electricity.

Answer: Only foam rubber is compressible material

Explanation:

The pillow is made up of foam rubber which can be compressed easily due to the soft compressible rubber with hands on application of pressure on the surface. The shape of pillow regain its original shape when the pressure is withdrawn from the pillow. If the same activity is performed on the piece of rectangular block of wood and plasticine. Then the rectangular block of wood cannot be compressed with hand as it is a solid body. Plasticine is a putty like material. It is a clay like material and it can be compressed with hand but when the pressure is withdrawn the plasticine does not regain its shape back.