HELP!!!
Water boils in an open pot at 100 °C, but in a pressure cooker it can boil at 116 °C.
Describe what happens to the gas particles inside the pressure cooker as the pressure increases.
Explain whether the diagram Francisco drew is correct for the water particles in an open pot at 100 °C as well as those in the pressure cooker at 116 °C.
Identify which water particles have more energy, those in the open pot or those in the pressure cooker.
Explain why Francisco should use a pressure cooker to warm the jars of vegetables. Include a description of the behavior of the gaseous and liquid particles in the pressure cooker in your explanation.
PLEASE GIVE ME AN ANSWER TO EACH ONE IF YOU CAN.
Answers
Answer:
A pressure cooker looks like a regular pot but has a modified lid that locks on over a rubber gasket to create a seal. The cooker works by raising the temperature of boiling water, thereby speeding up the time it takes to boil, braise, or steam. To use a pressure cooker, you put the food in the pot with some liquid-usually a minimum of 2 cups to build up sufficient steam pressure. Once the lid is locked in place and the cooker is set on high heat, steam develops in the pot and can’t escape. The trapped steam increases the atmospheric pressure inside the cooker by 15 pounds per square inch (psi), or 15 pounds above normal sea-level pressure. At that pressure, the boiling point of water is increased from 212°F to 250°F. This higher temperature is what cooks food faster. Once the cooker has reached full pressure, usually indicated by a gauge or pop-up rod on the lid, a release valve opens, letting out steam in a regulated flow to maintain a constant temperature inside the pot.
Explanation:
Related Questions
Why is productivity greatest near the ocean’s surface
Answers
Answer:
Sunlight penetrates the top layers of the ocean, so photosynthesis occurs there.
Explanation:
Which pair of objects is experiencing the greatest gravitational force?
2 kg
2 kg
A.
d = 5 m
2 kg
2 kg
B.
dolm
5 kg
skg
doim
3 kg
skg
OD
da 5 m
Answers
Answer:
c
Explanation:
Which statement accurately compares these flashlights?
A. The smaller flashlight has more inertia than the larger flashlight,
so it takes less force to change the motion of the smaller
flashlight
B. The smaller flashlight has less inertia than the larger flashlight, so
it takes more force to change the motion of the smaller flashlight.
C. The smaller flashlight has less inertia than the larger flashlight, so
it takes less force to change the motion of the smaller flashlight.
D. The smaller flashlight has more inertia than the larger flashlight,
so it takes more force to change the motion of the smaller
flashlight
Answers
The small flashlight has less inertia and smaller force is required to move it.
According to Newton's first law of motion, an object will continue at rest or in its state of uniform motion unless it is acted upon by an external unbalanced force. This is also called the law of inertia.
The quantity of mass contained in a body is a measure of its inertia. The greater the mass of the body, the greater the inertia and the greater the force required to move the body.
The smaller flashlight has less inertia than the larger flashlight, so it takes less force to change the motion of the smaller flashlight.
Learn more about Newton's law : https://brainly.com/question/13678295
which type of spectra would be produced by a hydrogen lamp?
Answers
Answer: Emission spectra
The Emission spectrum can be separated into three types:
Line emission spectrum Continuous emission spectra.Band emission spectrumWhat is a Hydrogen lamp?
A gas of hydrogen atoms will create an absorption line spectrum if it is between you (telescope+spectrograph) and a continuum light source, and also an emission line spectrum if considered from a distinguishable angle.
When The emission spectrum of atomic hydrogen has been divided into several spectral sequences, with wavelengths given by the Rydberg formula.
These experimental spectral lines are due to the electron-making transitions between two energy positions in an atom.
Find more information about Hydrogen lamp here:
https://brainly.com/question/4597871
asap help for brainlist
Which pair of atoms will form a covalent bond?
Question 7 options:
H and O
Li and I
K and Fl
Na and Cl
Answers
Answer:
h and o
Explanation:
because both are non metals
determine the ph of a buffer that is 0.55 M HNO2 and 0.75 M KNO2. tha value of Ka for HNO2 is 6.8*10^-4
Answers
Answer:
pH = 3.3
Explanation:
Buffer solutions minimize changes in pH when quantities of acid or base are added into the mix. The typical buffer composition is a weak electrolyte (wk acid or weak base) plus the salt of the weak electrolyte. On addition of acid or base to the buffer solution, the solution chemistry functions to remove the acid or base by reacting with the components of the buffer to shift the equilibrium of the weak electrolyte left or right to remove the excess hydronium ions or hydroxide ions is a way that results in very little change in pH of the system. One should note that buffer solutions do not prevent changes in pH but minimize changes in pH. If enough acid or base is added the buffer chemistry can be destroyed.
In this problem, the weak electrolyte is HNO₂(aq) and the salt is KNO₂(aq). In equation, the buffer solution is 0.55M HNO₂ ⇄ H⁺ + 0.75M KNO₂⁻ . The potassium ion is a spectator ion and does not enter into determination of the pH of the solution. The object is to determine the hydronium ion concentration (H⁺) and apply to the expression pH = -log[H⁺].
Solution using the I.C.E. table:
HNO₂ ⇄ H⁺ + KNO₂⁻
C(i) 0.55M 0M 0.75M
ΔC -x +x +x
C(eq) 0.55M - x x 0.75M + x b/c [HNO₂] / Ka > 100, the x can be
dropped giving ...
≅0.55M x ≅0.75M
Ka = [H⁺][NO₂⁻]/[HNO₂] => [H⁺] = Ka · [HNO₂]/[NO₂⁻]
=> [H⁺] = 6.80x010⁻⁴(0.55) / (0.75) = 4.99 x 10⁻⁴M
pH = -log[H⁺] = -log(4.99 x 10⁻⁴) -(-3.3) = 3.3
Solution using the Henderson-Hasselbalch Equation:
pH = pKa + log[Base]/[Acid] = -log(Ka) + log[Base]/[Acid]
= -log(6.8 x 10⁻⁴) + log[(0.75M)/(0.55M)]
= -(-3.17) + 0.14 = 3.17 + 0.14 = 3.31 ≅ 3.3
What is the pH of a 0.02 M HCl solution?
O A
1.7
B.
2.0
3.7
O
D.
4.0
Answers
Answer:
2 is answer of this question
What electrolyte may fall in level as a result of citrate toxicity from massive transfusion quizlket
Answers
Where does the energy come from to break the bonds of water and carbon dioxide molecules?
Answers
Answer:
carbohydrates
Explanation:
or carbon dioxide
can someone help me with this
Answers
Answer: 5. Positive
6. Negative
9. Oxygen carbon hydrogen nitrogen
Explanation:
A system which allows both mass and energy to flow into the surroundings is called
Answers
Answer:
An open system can exchange both energy and matter with its surroundings. The stovetop example would be an open system, because heat and water vapor can be lost to the air.
Explanation:
PLEASE HELP
If an atom has a negative charge, it has ___ protons than electrons.
A) More
B) Less
C) The same amount
Answers
As if the atom has more electrons than protons it is negatively charged
Answer:
less
Explanation:
An electron has a charge of -1 so if there are more electrons than protons the overall charge of the atom is going to be negative
Which ingredients are needed to transform nadp to nadph?.
Answers
Answer:
according to online:
"Hydrogen ions are transported with the electrons along the chain of reactions. In photosystem I, the electrons are energized, and the energy is stored in molecules of NADP+. During these reactions, the NADP+ molecules are reduced by the addition of electrons. A hydrogen ion is added to NADP+ to form NADPH."
Explanation:
hope this helps!! :)
Which liquid will evaporate more rapidly? Explain your answer in terms of intermolecular forces
acer
Answers
how can you keep a cold drink cold without ice or a refrigerator
Answers
Answer:
snow and a cooler
Explanation:
so if its really cold out side put your drink out there.
what makes your pulse? Explain
Answers
TRUE or FALSE the term “anti-inflammatory” likely means “against inflammation”
Answers
Answer:
True
ANTI MEANS AGAINST
Explanation:
if we change the pH of a substance is this a physical change chemical change or both?
Answers
Answer:
chemical change
ExplanationC:
what is the solute when stirring salt in water until the salt disappears?
Answers
Answer:
The solute is the substance being dissolved.
The solvent is the substance dissolving the solute.
Therefore, the salt is the solute and the water is the solvent.
Explanation:
The salt is the solute.
True of False: The 8-Step Problem Solving Process was developed as an intended expansion of OODA Loop.
Answers
The 8-Step Problem Solving Process is vital to solving problems in an organized way and it's an extended form of OODA Loop. Therefore, it's logically true.
The 8-Step Problem Solving Process include the following:
Defining the problem.Clarifying the problem.Defining the goals.Identification of the root cause of the problem.Development of an action plan.Executing action plan.Evaluating the results.Continuous improvement.It should be noted that the 8-Step Problem Solving Process was developed as an intended expansion of the OODA Loop. Therefore, the statement is true.
Read related link on:
https://brainly.com/question/25690509
a chemical compound in which ions are held together in a lattice structure by ionic bonds
Answers
Answer:
Ionic compounds contain ions and are held together by the attractive forces among the oppositely charged ions
Explanation:
Common salt (sodium chloride) is one of the best-known ionic compounds. Molecular compounds contain discrete molecules, which are held together by sharing electrons (covalent bonding).
IF U HAAD THEE RIGHHT ANSWERRR PLZZZ
- Which of the following is NOT part of Dalton's atomic theory?
A) Atoms are the smallest, indivisible particles in nature.
B) Chemical reactions are simple rearrangements of atoms.
C) Atoms follow the law of multiple proportions.
D) Each atom of an element is identical to every other atom of that element. b
Answers
Answer:A
Explanation: I’m pretty sure
As part of a science experiment, Jose did a test for starch on a slice of apple and a slice of potato. The yellow-orange iodine solution stayed the same color when it was put on the apple, but it became black on the potato.
Why did the iodine solution change color on the potato?
A.
The iodine burned the potato and turned it to ash.
B.
The iodine mixed with the colors of the potato so it looked black.
C.
The iodine evaporated into a gas.
D.
The iodine reacted with the potato to form a new substance.
Answers
Answer:
d, the idiodine reacted
Convert 1.56x10^30 particles of sodium chloride to grams of sodium chloride
Answers
Answer:
I cannot tell yet
Explanation:
I don't take that class yet but ill get back to you
Help me please, I don't get it. Please & thank you, xoxo !
Answers
Sorry I accidentally touched it
When light waves pass through solids, the speed of the wave ___________.
remains the same
decreases
increases
Answers
It woukd decrease.
I am sure its correct you can trust me becuase I took the test.
Answer:
The speed of the wave decreases.
Explanation:
When light waves do pass through a medium, any solid, liquid, or gas, the speed of the waves actually decreases. Solids are more dense than liquids, so they decrease the speed of light even more.
(I did the quiz btw!!)
Which ions are isoelectronic with ar?.
Answers
Answer:
Isoelectronic means same electronic configuration as Ar. These are such as sulfide ion (S2− ), chloride ion (Cl− ) and phosphide ion (P3− ).
Explanation:
Any atom or ion with 18 electrons is isoelectronic with Ar. Some examples are:
Ca2+S2-Cl-What are isoelectronic?Isoelectronic atoms or ions refer to those that possess an identical number of electrons consequently sharing the same electron configuration. The term "isoelectronic" derives from the Greek words "isos " signifying "equal " and "elektron " denoting "electron".
It is worth noting that isoelectronic atoms or ions may exhibit varying atomic numbers and charges; nonetheless, their electron count remains constant.
Learn about isoelectronic here https://brainly.com/question/30014620
#SPJ6
The fuel used in many disposable lighters is liquid butane, c4h10. Butane has a molecular weight of 58. 1 grams in one mole. How many carbon atoms are in 3. 50 g of butane.
Answers
Answer:The first thing you need to do is calculate the molar mass of C4H10.
Explanation:
help asap for brainlist
The melting and boiling point tests will MOST help them to infer the strength of intermolecular forces between ionic and covalent compounds?
Question 12 options:
True
False
Answers
Answer:
True po
Explanation:
Sana nakatutulong
#Carry on learning
Ionic compounds have higher melting and boiling point than covalent compounds, since ionic bonds are stronger than covalent bonds. Hence, we can compare the intermolecular forces using melting or boiling points.
What is boiling point?Boiling point of a substance is the temperature at which the substance changes from liquid state to gaseous state. Melting point is the temperature at which the substance changes from solid state to liquid state.
Both melting point and boiling point depends on the bond type, molecular weight, temperature and pressure. Stronger the bond , higher energy needed to weaken the intermolecular force between molecules to convert them to liquid state or vapour state.
Hence, the temperature that have to be applied to loosen the bonds to boil them or melt them increases as bond strength increases. Therefore, these physical quantities definitely helps to infer the strength of bonds.
To find more on boiling point, refer here:
https://brainly.com/question/2153588
#SPJ2
How do you think getting fewer of these molecules to her cells contributed to Elisa’s tiredness?
Answers
Answer:
Elisa is always tired because her cells arent producing enough sugars also know as glucose forher body. another way to write out glucose is to use its equation C6H12O6.
Explanation:
Students figure out: Elisa feels tired because her cells aren't getting the molecules they need from food and air, which are necessary for her cells to function, grow, and repair. ... Students figure out: Elisa's cells are getting enough oxygen and amino acids, but not enough glucose