Answer: 4 ATP molecules is produced in the glycolysis of 2 glucose molecules
How is ATP produced?The first stage of most carbohydrate catabolism, which is described as the breakdown of larger molecules into smaller ones, is glycolysis, which is a part of cellular respiration. Two Greek words that mean "to break down anything sweet" are the source of the word glycolysis. Two molecules of ATP are created during the breakdown of glucose and formation of pyruvate during glycolysis.
Explanation:
2 ATP are produced.
For every glucose molecule, meaning that for every 2 glucose molecules, 4 ATP will be created.
For more information on ATP visit: https://brainly.com/question/174043
#SPJ4
SEP Compare Data Look at the data in Figure 2. Which is the most
electronegative
atom? Which is the least?
The most electronegative atom is Flourine and the least is Hydrogen
How is fluorine the one with most electronegative atom?The attached image indicates how the highly electronegative Fluorine atom takes away most of the electron density (red-to-blue colored cloud) from a hydrogen–fluoride covalent bond.
An electronegative atom is an atom that has a tendency to attract electrons towards itself when it is part of a chemical bond. The most common example is the oxygen atom. The ability of an atom to attract electrons is known as its electronegativity.
The higher the electronegativity of an atom, the more it will pull electrons towards itself. The electronegativity of an atom is determined by its atomic number and the number of electrons in its outermost shell.
Therefore, the correct answer is as given above
learn more about electronegative atom: https://brainly.com/question/24977425
#SPJ1
What sources of error may have contributed to the percent yield not being 100 percent? Think about things that may have led to inaccurate measurements or where mass of the product could have been lost if this experiment was conducted in a physical laboratory
The product could have been lost if this experiment was conducted in a physical laboratory: Human Error, Incomplete Reaction, Inadequate Stirring, Impurities and Loss of Product.
What is product?Product is a tangible or intangible good that is produced for sale on the market.
1. Human Error: Inaccurate measurements or miscalculations during the experiment may have caused the percent yield not to be 100%.
2. Incomplete Reaction: Depending on the reaction conditions, it is possible that the reaction did not go to completion, leading to a lower percent yield than expected.
3. Inadequate Stirring: If the reactants were not adequately mixed during the experiment, some reactants may not have been able to properly react, resulting in a lower percent yield.
4. Impurities: If the reactants used in the experiment were impure, it could lead to a lower percent yield due to the presence of undesirable substances that can interfere with the reaction or are not involved in the reaction.
5. Loss of Product: If the experiment was conducted in a physical laboratory, it is possible that some of the product was lost during the experiment due to improper handling or other factors.
To learn more about product
https://brainly.com/question/29171025
#SPJ4
Step 2: measure the area of the top of the syringe
The top of the syringe is a circle. You need to compute area for use in lead to computations of pressure valves. Start by using a ruler to measure the diameter. Estimate to the nearest. 1 cm
3. 60 cm
Divided by two to find the radius. Maintain significant figures
1. 80 cm
Substitute the radius into the formula pie r 2 To find the area of the top of the syringe. Maintain significant figures
10. 2 cm
The syringes' circle measures area 10.17 square inches.
The area of a circle is the area that a circle occupies on a two-dimensional plane. The region contained by the circle's radius or perimeter is another way to define the circle's area. The circle's radius, or r, is equal to its diameter in half.
The diameter given is 3.60cmThe radius given is 1.80cmWe need to calculate the area of the circle
You may determine the circle's surface area via
Change the formula's value for r.
Area of circle =π[tex]r^{2}[/tex]
Area of circle =3.14[tex]\times[/tex]1.80[tex]\times[/tex]1.80
Area of circle =10.17 [tex]cm^{2}[/tex]
Hence the area of the Circle is 10.17[tex]cm^{2}[/tex]
Learn more about area.
brainly.com/question/27683633
#SPJ4
8.0 mol AgNO3 reacts with 5.0 mol Zn in
a single replacement reaction.
2AgNO3 + Zn→ 2Ag + Zn(NO3)2
How many moles of Ag form from 5.0
mol Zn?
[?] mol Ag
Round your answer to the ones place.
The number of moles of Ag that forms from 5.0 moles of Zn is 10 moles.
How to calculate number of moles?The number of moles of a substance can be calculated stoichiometrically as follows;
Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).
According to this question, silver nitrate reacts with zinc to produce silver and zinc nitrate as follows:
2AgNO₃ + Zn → 2Ag + Zn(NO₃)₂
Based on the equation above, 1 mole of Zn produces 2 moles of silver.
Hence, 5 moles of Zn will produce 10 moles of Ag.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
Shriram saw the Sun on his LEFT while Kabir saw it on his RIGHT.Based on this, Which of the following statements is true?
Answer:
they were facing the oppisite ways
Explanation:
What is the relationship between properties and substances?
The relationship between properties and substances is an important one as the properties define or describe the type, kind or composition of a substance. There are two factors that affect the properties of a substance and these are kinetic energies and intermolecular forces.
In chemistry, substances are categorized on the basis of physical and chemical properties. All the substances are composed of tiny particles which are in constant motion due to kinetic energy and keep moving in all directions in a substance.
In addition to this, intermolecular forces are also present in a substance which keeps the particles together. In this way substances maintain their shape, arrangement and properties such as melting point, boiling point, hardness, composition and color due to their particular properties.
If you need to learn more about substance click here:
https://brainly.com/question/24647756
#SPJ4
What is the total reduction potential of a cell in which sodium (Na) is reduced and zinc (Zn) is oxidized
The total reduction potential of a cell in which sodium (Na) is reduced and zinc (Zn) is oxidized -1.95 V.
The tendency of a chemical species is to be reduced, expressed in volts under normal conditions, is known as the standard reduction potential.
The standard reduction potential belongs to the group of potentials known as standard electrodes or standard cells. The difference in voltage between the cathode and anode is known as the standard cell potential. The standard sodium reduction potential is -2.71V. Zinc has an average reduction potential of -0.76 V. Therefore, the overall reduction potential is 1.95 V.
Learn more about Reduction Potential
brainly.com/question/1313684
#SPJ4
an unbalanced 16.0 N force is applied to a 2.0 kg mass. what is the acceleration of the mass
The acceleration of the mass is 8.0 m/s² when an unbalanced 16.0 N force is applied to a 2.0 kg mass.
To calculate the acceleration of the mass, we can use Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration (F = ma).
We know that the force acting on the object is 16.0 N, and the mass of the object is 2.0 kg. So, we can use the equation to solve for the acceleration:
a = F ÷ m
where, a = acceleration, F = force (16.0 N), m = mass (2.0 kg)
So,
a = 16.0 N ÷ 2.0 kg = 8.0 m/s²
Therefore, the acceleration of the mass is 8.0 m/s²
Learn more about acceleration:
https://brainly.com/question/3046924
The Ksp of SrSO4 is 3. 2 x 10^-7. What is the equilibrium concentration of a sulfate ion in a 1. 0 Dash L solution of strontium sulfate which 0. 10 mol of Sr(CH3CO2)2 has been added?
The equilibrium concentration of a sulfate ion is 32× 10⁻⁶M can be added in a 1. 0 Dash L solution of strontium sulfate which is 0. 10 mol of Sr(CH3CO₂)₂.
Solubility is defined as the maximum amount of a solute that can be dissolved in a known quantity of the solvent at a certain temperature is its solubility.
The solubility of SrSO₄ is:
SrSO₄(s) → Sr²⁺(aq) + SO₄²⁻(aq)
Where Ksp is defined as:
Ksp = 3.2x10⁻⁷ = [Sr²⁺] [SO₄²⁻]
The concentration of Sr is:
0.10mol / 1L = 0.10M = [Sr²⁺]
Replacing in Ksp:
3.2x10⁻⁷ = [0.10M] [SO₄²⁻]
[SO₄²⁻] = 3.2x10⁻⁶M
To know more about solubility here
https://brainly.com/question/28170449
#SPJ4
The world’s record for the largest cup of coffee was broken on October 152010, with a 2010 gallon cup of coffee in Las VegasNevada. If a cup of coffee contains 237 mL of coffeehow many cups of coffee would be required to fill this enormous coffee cup?
The number of coffee cups that would be required to fill the enormous coffee cup would be 32 cups.
Dimensional analysisThe world's largest cup of coffee can hold 2010 gallons of coffee as recorded in Las Vegas.
A normal coffee cup will only hold as much as 237 mL of coffee. Recall that:
1 gallon = 3.78541 LIf 1 gallon = 3.78541 L
2010 gallons = 2010 x 3.78541
= 7608.6741 L
In other words, the coffee cup with the record size will hold a maximum of 7608.6741 L of coffee while a normal coffee cup will only hold 237 mL. The problem now is the number of number coffee cups that will fill the world's record largest coffee.
7608.6741/237 = 32.10
Therefore, the number of normal coffee cups that would be required to fill the enormous coffee cup would be approximately 32 cups.
More on dimensional analysis can be found here: https://brainly.com/question/13078117
#SPJ1
You have a 400-mL container containing 55. 0% He and 45. 0% Ar by ma at 25°C and 1. 5 atm total preure. You heat the container to 100°C Calculate the ratio of PHe : PAr
The ratio of the container with PHe: PAr will be given as= 12.2/1
All pressures present in a reference system are added together to get the total pressure, or ptot. Bernoulli (see Fluid mechanics) defined this pressure as the sum of the static pressure (p), dynamic pressure (pdyn), and geodetic component (g, z) that exist in a fluid along a stream line in a frictionless flow.The pascal (Pa), often known as kilograms per square meter per second (kg/m1s2), is the SI unit for pressure. Prior to 1971, pressure in SI was only expressed in terms of newtons per square meter; this nomenclature for the unit was added at that time. While a fluid is stationary or when you are moving with it, you have static pressure. You would feel an equal amount of air pressure from all sidesTo know more about pressure here
https://brainly.com/question/22264785
#SPJ4
The ratio of PHe: PAr will be given as= 12.2/1
All pressures present in a reference system are added together to get the total pressure, or ptot. Bernoulli (see Fluid mechanics) defined this pressure as the sum of the static pressure (p), geodetic component (g, z) and dynamic pressure (pdyn), that exist in a fluid along with a stream line in a frictionless flow. The pascal (Pa), often known as kilograms per square meter per second (kg/m1s2), is the SI unit of pressure. Before 1971, pressure in SI was expressed in terms of newtons per square meter. You have static pressure, while a fluid is stationary or when you are moving with it. You would feel an equal amount of air pressure from all the sides.
To know more about pressure here
https://brainly.com/question/12971272
#SPJ4
What is the expected major organic product from treatment of 4-methyl-2-pentyne with sodium metal in liquid ammonia
4-methyl-2-pentene s the expected major organic product from treatment of 4-methyl-2-pentyne with sodium metal in liquid ammonia.
The process includes hydrogenation of an alkyne to an alkene in liquid ammonia using sodium metal. This is a particular reaction that leads in the creation of trans alkene. Alkynes are hydrocarbons with triple carbon-carbon bonds. For molecules with a single triple bond, their typical formula is CnH2n-2 (and no rings).
A number of the same reactions occur in alkynes as in alkenes, but they can react twice due to the existence of two p-bonds inside the triple bond. When sodium dissolves into liquid ammonia (boiling point -33 °C), it turns a vivid blue. When there are alkynes present, they have reduced to a trans (i.e. E) alkene.
To know more about the Ammonia, here
https://brainly.com/question/28393162
#SPJ4
A balloon of hydrogen is subjected to vacuum. The initial pressure and volume of hydrogen is 0. 95 atm and 0. 55 L. Calculate the final pressure if the final volume is 1. 22 L?
The final pressure if the final volume is 1. 22 L will be 0.4234 atm
To calculate the final pressure of the hydrogen in the balloon if the final volume is 1.22 L, the ideal gas law can be used. The ideal gas law states that PV = NRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.
Since the number of moles and the temperature is not given, we can assume that they remain constant. So we can use the equation PV = k, where k is a constant.
Given the initial pressure and volume of the hydrogen are 0.95 atm and 0.55 L respectively.
0.95*0.55 = k
so k = 0.5175
then the final pressure can be calculated by:
P1V1 = P2V2
0.950.55 = P21.22
P2 = (0.5175) / (1.22) = 0.4234 atm
The final pressure of the hydrogen in the balloon will be 0.4234 atm.
Learn more about the effect of changing the volume of a gas on its pressure here: https://brainly.com/question/27704299
#SPJ4
Select the proper IUPAC name for the following compound, including the (R) or (S) designation where appropriate. (2R, 3S)-2.3-difluorohexane (2S, 3R)-2, 3-difluorohexane (2R, 3R)-2, 3-difluorohexane (2S, 3S)-2, 3-difluorohexane
The proper IUPAC name for the compound is (2R,3S)-2,3-difluorohexane.
It is determined by following the IUPAC nomenclature rules for organic compounds. The key points for this are:
Parent Chain: The parent chain is a hexane, which is a six-carbon chain.Position of Substituents: A first substituent is a fluoro group that is on the second carbon of the parent chain, and a second substituent is a fluoro group that is on the third carbon of the parent chain. We use the prefix di- to indicate that there are two substituents.Absolute Configuration: The compound is a chiral compound, meaning that it has non-superimposable mirror images. To indicate the absolute configuration, we assign the priority of the substituents based on the atomic number of the atom directly bonded to the carbon atom of the substituent. The prefix (2R,3S) indicates that the substituent on the second carbon is in the R configuration and the substituent on the third carbon is in the S configuration.Final IUPAC Name: The proper IUPAC name of the compound is (2R,3S)-2,3-difluorohexane.Learn more about IUPAC nomenclature here:
https://brainly.com/question/28872356
#SPJ4
Glass is typically produced by mixing sand (quartz or silica, SiO_2) with other compounds or minerals, which are then crushed, melted, and then cooled (vitrification). Given the compositions and properties of the different types of glass in the table above, consider the role each compound plays in the type of glass formed, and then complete the statements below. Match the compounds in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer. Adding to the mixture that undergoes vitrification produces a glass with brilliant optical properties. Adding to the mixture that undergoes vitrification produces a glass that can be used for baking purposes or storing chemical solutions. Adding to the mixture that undergoes vitrification produces a glass that is insoluble in water. Adding to the mixture that undergoes vitrification allows the glass to be produced at much lower temperatures.
Addition of soda (Na₂CO₃) to the vitrifying mixture produces glasses with excellent optical properties.
Give a brief account on silica?Silica is the common name for the compound silicon dioxide, which consists of one silicon atom and two oxygen atoms. It is an important component of many rocks, sands, and clays, and is also found in many plants and animals. Silica is used in a wide variety of products, from beer and wine to pottery, glass, and paint. It is also used in building materials such as concrete and mortar, and as a food additive. Silica is also used to make silicon-based electronics such as computer chips.
Adding lime (CaCO₃) to the vitrifying mixture creates a jar that can be used to bake or store the liquid medicine.
Addition of alumina (Al₂O₃) to a mixture undergoing vitrification produces a glass that is insoluble in water.
Addition of borax (Na₂B₄O₇) to the mixture during vitrification allows glass to be produced at much lower temperatures.
To know more about silica click-
https://brainly.com/question/28814012
#SPJ4
Write the balanced chemical equation that represents the addition of CL2 to CH3CH=CH2.
The balanced chemical equation that represents addition of CL2 to CH3CH=CH2 is : CH3CH=CH2 = CL2 > CH3CHClCH2Cl.
What is meant by balanced chemical equation?Balanced chemical equations have the same number and type of each atom on both the sides of an equation. Coefficients in a balanced equation has to be the simplest whole number ratio and mass is always conserved in chemical reactions.
Balanced equation is an equation for a chemical reaction where the number of atoms for each element in the reaction and total charge is same for both the reactants and products. In other words, we can say that mass and the charge are balanced on both sides of a reaction.
To know more about balanced chemical equation, refer
https://brainly.com/question/11904811
#SPJ4
Benzene (C6H6) burns in air to produce carbon dioxide and liquid water. How much heat is released per mole of benzene combusted? The standard enthalpy of formation of benzene is 49.04 kJ/mol
Benzene (C6H6) burns in air to produce carbon dioxide and liquid water.The heat released in KJ per gram of the compound reacted with oxygen is -41.83 KJ.
What is heat ?
Heat is the result of the movement of kinetic energy within a material or an item, or from an energy source to a material or an object. Radiation, conduction, and convection are the three mechanisms through which such energy can be transferred.
The movement of minuscule atoms, molecules, or ions in solids, liquids, and gases produces heat energy. From one thing to another, heat energy can be exchanged. Heat is the flow or transfer that occurs as a result of the temperature differential between two objects.
Reaction as follows;
2C6H6 + 15O2 → 12CO2 + 6H2O
2x49.04 2x10 12x-393.5 6x-285.8
= [ 12(-393.5 )+6(-285.8) ] - [ 2(49.04)+(2x10) ]
= - 6936.8 - 98
= - 6534.8 KJ/mole
Per gram of benzene
= ( -6534.8 KJ / 2 mole of C6H6) (1 mole of C6H6 / 78.108g )
= -41.83 KJ / mole
Thus, The heat released in KJ per gram of the compound reacted with oxygen is -41.83 KJ.
To learn more about heat, follow the link;
https://brainly.com/question/1429452
#SPJ1
Which of the following is consistent with an exothermic reaction that is nonspontaneous at high temperatures?
A.
?H > 0, ?S > 0, ?G < 0
B.
?H < 0, ?S < 0, ?G > 0
C.
?H < 0, ?S > 0, ?G > 0
D.
?H > 0, ?S < 0, ?G < 0
E.
?H < 0, ?S > 0, ?G < 0
As a result, option c is correct: H must be negative and S must be positive.
What is exothermic reaction?Energy is transmitted to or from the surroundings when a chemical reaction occurs. An exothermic reaction occurs when energy is transmitted to the surroundings, and the temperature of the surroundings rises. The term exothermic implies "heating up." As an exothermic process progresses, energy, frequently in the form of heat, is released. An exothermic reaction is one that is chemical in nature and is characterized by the release of energy in the form of heat or light. Matching a light with a matchstick is an example of this sort of reaction in which the release is both heat and light.
Here,
The spontaneity can be determined by the equation as:
ΔG=ΔH−TΔS
If the Gibbs free energy is negative, it gives a spontaneous reaction. Hence, the ΔH must be negative and ΔS must be positive.
If the Gibbs free energy is positive then it will be non-spontaneous. Hence, ΔS must be negative at very high temperature.
Therefore, option c is correct that is the ΔH must be negative and ΔS must be positive.
To know more about exothermic reaction,
https://brainly.com/question/10373907
#SPJ4
What are the types of chemical bonds? Describe each.
7. Convert 25.0 grams of KMnO4 to moles.
K-39.098
Mn- 54.938
0-15.999
Answer in THREE Sig Figs with Units
Diatomic elements are important. what makes them different from other elemental substances?
Diatomic elements are elements that exist as pairs of atoms. Unlike other elemental substances, diatomic elements cannot exist as single atoms, but must exist as a pair of atoms bound together.
What is elemental?Elemental refers to an element or substance made up of one kind of atom, such as oxygen, carbon, or hydrogen. Elements are the basic building blocks of matter, and they are combined in different ways to form the molecules of different materials. Elemental substances are the most basic form of matter, and they are essential for life on Earth. There are currently 118 known elements, and they are found in nature and in many products. Each element has unique properties, and they can be used in different ways. For example, oxygen is essential for human respiration, while carbon is found in many materials, such as plastics and diamonds.
Examples of diatomic elements include nitrogen (N2), oxygen (O2), hydrogen (H2), chlorine (Cl2), fluorine (F2), and bromine (Br2).
To learn more about elemental
https://brainly.com/question/18096867
#SPJ4
How many atoms are indicated by the prefixes for each of the following items. drag each item to the appropriate bin
tetrisdide montui donde bro utracondo chloride triponthou Decode 1 atom 2 atoms 3 atoms 4 stoms 5 atoms 6 atoms
The prefixes you provided do not correspond to any known chemical element or compound. The prefixes used in chemistry typically come from Greek or Latin and indicate the number of atoms present in a molecule of a certain element or compound.
For example, "mono-" indicates 1 atom, "di-" indicates 2 atoms, "tri-" indicates 3 atoms, "tetra-" indicates 4 atoms, and so on. prefixes let me know if you have any other question
Mono - 1 - montui, chloride
di - 2 atoms - donde
tri - 3 atoms - triponthou
tetra - 4 atoms - tetrisdide
utra - 5 atoms - utracondo are prefixes .
Learn more about prefixes here:
https://brainly.com/question/13679502
#SPJ4
[sulfate ion] in a1.15 M potassium sulfate
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, the concentration of sulfate ion is 1.15 M.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
K₂SO₄[tex]\rightarrow[/tex]2K⁺ + SO₄²⁻
concentration of potassium sulfate=concentration of potassium ion=concentration of sulfate ion
1.15 M =concentration of potassium ion=concentration of sulfate ion
Therefore, the concentration of sulfate ion is 1.15 M.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ1
How does Angelica Hernandez work help others
Answer:Angelica currently works on energy efficiency programs for Nexant, Inc, an Arizona-based company focused on clean energy solutions.
Explanation:
A sample of gas occupies 6.00 L at a temperature of 200 K. If the pressure remains constant and the temperature is raised to 600 K, the volume of the gas sample would be:
The Ideal Gas Law states that the volume of a gas is proportional to its temperature at constant pressure.
What is pressure?Pressure is a force that is applied to an object over an area. It is measured in units of force per unit area, such as Pascals (Pa). Pressure can be applied in a number of ways, such as by squeezing, pushing, or compressing. It can also be caused by the weight of an object, or the force of gravity. Pressure can be used to do work, such as moving an object or creating heat.
This means that if we double the temperature, we will double the volume. Therefore, if the temperature of the gas sample is raised from 200 K to 600 K, the volume of the gas sample will increase from 6.00 L to 12.00 L.
To learn more about Pressure
https://brainly.com/question/25736513
#SPJ4
What type of rock commonly often contains gas bubbles and the mineral(s) hornblende, muscovite, olivine, lucite, and/or plagioclase?
Igneous rock commonly often contains gas bubbles and the mineral(s) hornblende, muscovite, olivine, lucite, and/or plagioclase.
What are igneous rocks?
Igneous rocks are rocks that form when molten rock cools and solidifies, either below the Earth's surface or on its surface. They are the oldest type of rocks on the planet and are composed primarily of crystals. Examples of igneous rocks include basalt, gabbro, granite, obsidian, pumice, and scoria.
Igneous rocks form from cooling and crystallizing molten rock, or magma. As the magma cools, minerals crystallize out of the molten material, forming the igneous rock. Hornblende, muscovite, olivine, lucite, and/or plagioclase are all common minerals that form as the magma cools, due to their high melting points. Gas bubbles may also form as the magma cools, creating a "vesicular" texture.
To know more about igneous rocks,
https://brainly.com/question/18467164
#SPJ4
What are the types of elements answer?
The three types of elements are metals, non-metals as well as metalloids, there are placed in a periodic table.
In a periodic table, metals are placed in s-block and d-block. While non-metals as well as metalloids are placed in p-block. Metals are generally lustrous, malleable as well ductile in nature and are usually hard in nature while non-metals lack these properties. Metalloids are the elements whose chemical as well as physical properties lies between both metals and non-metals. Examples of metals are sodium and potassium. Examples of non-metals are carbon and phosphorus while examples of metalloids are silicon and germanium.
To learn more about elements check the link below:
brainly.com/question/25916838
#SPJ4
How the structure of molecule affects physical properties?
The structure of a molecule affects its physical properties because the arrangement of the atoms in the molecule determines the type of forces that interact between molecules.
And that forces affect how the molecules move and interact with each other. This, in turn, affects the physical properties of the molecule, such as its melting point, boiling point, polarity, and solubility.
For example, when a molecule has a higher number of non-polar bonds due to symmetrical structures, it will be less polar overall and have fewer attractive forces acting between molecules, resulting in a higher boiling point and lower solubility.
On the other hand, a molecule with a higher number of polar bonds due to asymmetrical structures will be more polar overall, leading to stronger attractive forces acting between molecules, resulting in a lower boiling point and higher solubility.
For more questions like Properties click the link below:
https://brainly.com/question/13562531
#SPJ4
Name the following compound
(ii) CH3COOCH2CH2CH3
Answer:
PROPYL ETHANOATE (OR PROPYL ACETATE)
Explanation:
1st step: Identify the functional group of the compound.
COO is present, hence it is an ester.
2nd step: Split up the compound into CH3COOH and CH3CH2CH2OH.
Comes from ethanoic acid and propanol
3rd step: Join the names of the alcohol and the carboxylic acid together.
Hence, propyl ethanoate.
What is the main function of meter?
The main function of the meter rule is to measure the distance between the two points , it is use to measure the length.
The first unit of the length is the meter. the length is defined as the distance between the two points. the meter is used to measure the length in the international system of the units. the instrument used to measure the meter is the meter rule or the meter stick. the mete rule is also called as the ruler. before the meter rule of discovery we use the primitive methods to measure the distance.
Thus, the function of the meter is the to measure the distance between the two points.
To learn more about meter here
https://brainly.com/question/17687457
#SPJ4