Answer:
34 mL
Explanation:
We'll begin by calculating the number of mole in 1.25 g of sodium carbonate, Na₂CO₃. This can be obtained as follow:
Mass of Na₂CO₃ = 1.25 g
Molar mass of Na₂CO₃ = (23×2) + 12 + (16×3)
= 46 + 12 + 48
= 106 g/mol
Mole of Na₂CO₃ =?
Mole = mass /molar mass
Mole of Na₂CO₃ = 1.25 / 106
Mole of Na₂CO₃ = 0.012 mole
Next, we shall determine the number of mole HCl needed to react with 0.012 mole of Na₂CO₃.
The equation for the reaction is given below:
Na₂CO₃ + 2HCl —> H₂CO₃ + 2NaCl
From the balanced equation above,
1 mole of Na₂CO₃ reacted with 2 moles of HCl.
Therefore, 0.012 mole of Na₂CO₃ will react with = 0.012 × 2 = 0.024 mole of HCl.
Next, we shall determine the volume of HCl required for the reaction. This is illustrated:
Mole of HCl = 0.024 mole
Molarity of HCl = 0.715 M
Volume of HCl =?
Molarity = mole /Volume
0.715 = 0.024 / volume of HCl
Cross multiply
0.715 × volume of HCl = 0.024
Divide both side by 0.715
Volume of HCl = 0.024 / 0.715
Volume of HCl = 0.034 L
Finally, we shall convert 0.034 L to mL
This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.034 L = 0.034 L × 1000 mL / 1 L
0.034 L = 34 mL
Therefore, 34 mL of HCl is needed for the reaction.
The amount of HCl required for counterbalancing 1.25 g of Na2CO3(Sodium Carbonate) would be:
- [tex]34 ml[/tex]
Given that,
Mass of Na2CO3 [tex]= 1.25 g[/tex]
To find the Moles of Na2CO3, we will find the molar mass of Na2CO3,
Molar Mass of or Na2CO3 [tex]= 106 g/mol[/tex]
So,
Moles of Na2CO3 [tex]= mass /molar mass[/tex]
[tex]= 1.25/106[/tex]
[tex]= 0.012 mol[/tex]
To determine the quantity of HCl required to display the reaction with 0.012 mol of Na2CO3
[tex]Na_{2} CO_{2} + 2HCl[/tex] → [tex]H_{2}CO_{3} + 2NaCl[/tex]
While balancing the equation, we know that [tex]0.012[/tex] × [tex]2 = 0.024 mole of HCl[/tex] is necessary to process the reaction.
Now,
As we know,
HCl moles [tex]= 0.024[/tex]
Molarity of HCl [tex]= 0.715 M[/tex]
∵ Quantity of HCl required = Moles/Molarity
[tex]= 0.024 / 0.715[/tex]
[tex]= 0.034 l[/tex] [tex]or 34ml[/tex]
Thus, 34 ml is the correct answer.
Learn more about 'Molarity' here:
brainly.com/question/12127540
A 0.10M NH3 solution is 1.3% ionized, calculate the hydrogen ion concentration
Answer:NH3 + H2O <==> NH4+ + OH-
0.10 x 0.013 = 0.0013 M (this is the hydroxide concentration)
Kw = [H+] [H-]
1.00 x 10^-14 = (x) (0.0013)
x = 7.7 x 10^-12 M
Explanation:
which bond does water atom share
Answer:
Covalent bonds
Explanation:
A water molecule consists of two atoms of hydrogen linked by covalent bonds to the same atom of oxygen. Atoms of oxygen are electronegative and attract the shared electrons in their covalent bonds.
I have a lab report I have to do for Chemistry on Edge, the lab is on Enthalpy.
please let me know if you need further information.
Answer:
I need further information.
Explanation:
Extra information is needed for you to know the correct information.
What is Enthalpy?It is a thermodynamic quantity that is equal to the total heat content of a system. It is equal to the internal energy of the system plus the product of pressure and volume.
Enthalpy is nothing but energy and they are of 4 types in thermodynamics-
1. Internal Energy, U
2. Heat enthalpy, H
3. Helmholtz enthalpy, A
4. Gibb's Free enthalpy, G
The total energy of a system cannot be measured directly because the internal energy contains components that are unknown, not easily accessible, or are not of interest in thermodynamics. Generally, a change in enthalpy is the expression for measurements at constant pressure because it simplifies the information of energy transfer.
Therefore, Extra information is needed for you to know the correct information.
Learn more about Enthalpy, here:
https://brainly.com/question/3393755
#SPJ3
What keeps the Earth orbiting on its current path
in our solar system?
One liter of gas A at 1.0 atm pressure has a temperature of 25°C while the same volume and pressure of gas B has a temperature of 50°C. What else do you know about these two gases?
A) There are twice as many moles of gas B than gas A.
B) Gas A has twice the molar mass of gas B.
C) Gas A has more kinetic energy than gas B.
D) Gas B has more kinetic energy than gas A.
Answer:
b
Explanation:
Which one is it for a brialiest
What happens if more solute is added to a saturated solution?
Answer:
A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.
Answer:
will not change
Explanation:
A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.
Rusting is a chemical reaction between Iron metal [Fe(s)] and oxygen gas [O2(g)] in a slightly acidic environment. Rusting is actually a multi-step reaction, however it has the net overall reaction of:
4Fe+3O2--->2FeO3
If 100.0 g of iron metal are converted into rust, how many moles of rust will have formed? (Assume unlimited oxygen gas.)
*Hint* You already converted 100.0 g of Fe into moles of Fe in a previous question, start there.
Answer:
0.895 mole of Fe₂O₃.
Explanation:
We'll begin by calculating the number of mole in 100 g of Fe. This can be obtained as follow:
Molar mass of Fe = 56 g/mol
Mass of Fe = 100 g
Number of mole of Fe =?
Mole = mass / molar mass
Number of mole of Fe = 100 / 56
Number of mole of Fe = 1.79 mole
Finally, we shall determine the number of mole of Fe₂O₃ produced by the reaction of 100 g (i.e 1.79 moles) of Fe. This can be obtained as follow:
4Fe + 3O₂ — > 2Fe₂O₃
From the balanced equation above,
4 moles of Fe reacted to produce 2 moles of Fe₂O₃.
Therefore, 1.79 moles of Fe will react to produce = (1.79 × 2)/4 = 0.895 mole of Fe₂O₃.
Thus, 0.895 mole of Fe₂O₃ was obtained from the reaction.
Help please thank youu
Answer:
The KE increases.
Explanation:
KE=1/2(mv²)
So, as the velocity increases, kinetic energy also increases.
As mentioned in the kinetic molecular theory, what is the main reason that the volume of gas particles can be considered zero?
a)The bonds present in gas particles are stronger than other bonds, pulling atoms in closer to each other, causing a shorter bond length which greatly decreases the volume.
b)When atoms enter the gas phase, they are less affected by gravity, which lowers their mass and in turn, their volume.
c)The real volume of the gas particles is extremely small when compared to the entire volume of their container.
d)Gas particles constantly expand and contract, which constantly alters their volume. When these volumes are averaged, a value of zero is obtained.
Answer:
The real volume of the gas particles is extremely small when compared to the entire volume of their container.
d)Gas particles constantly expand and contract, which constantly alters their volume. When these volumes are averaged, a value of zero is obtained
Explanation:
Cosmic rays are
A. High energy radiation produced in the ozone layer.
B. High energy radiation produced by the earth’s core.
C. None of these.
D. High energy radiation produced by the sun.
A. High energy radiation produced in the ozone layer. (:
2. Some nitrogen at a pressure of 35.75 p.s.i is in a 100 L container. If the container's volume is reduced to 2250 ml then what is the resulting pressure?
Answer:
1455.6
Explanation: you first convert 2250ml to l by dividing by 1000 so you get 2.25l then you use Boyles law which is p1v1=p2v2 then insert values
35.75*100=p2*2.25 then divide both sides by 2.25 then you get 1455.6
is sublimation a chemical change or chemical property or physical change?
Answer:
Physical Change
Explanation:
Sublimation is a physical change. When a substance sublimes, it changes from a solid to a gas without going through the liquid phase.
Which of the following forces has the smallest energy per bond?
A) iconic bonds
B) covalent bonds
C) hydrogen bonds
D) dispersion bonds
......A) iconic bonds........
The attractive forces existing between the molecules of a substance are known as the intermolecular forces. Among the given forces dispersion bonds has the smallest energy per bond. Thus option D is correct.
What is Dispersion forces?The forces which are found in nonpolar molecules like O₂, N₂, Cl₂ etc. as well as in monoatomic gases such as 'He', 'Ne' etc. are called dispersion forces or London forces.
The London force is found to be the weakest intermolecular force and it is known to operate in all types of molecules. This force is also called the induced dipole - induced dipole attraction.
This force is generally resulted from the movement of electron cloud which creates a temporary instantaneous dipole. This distorts the arrangement of electrons of other atoms or molecules which are close to it and also induces a dipole in them.
In this way a large number of nonpolar molecules become polar temporarily and they are attracted by weak attractive forces. The dispersion bonds are easy to form and break.
The dispersion force is the weak attractive force and has the smallest energy per bond.
Thus the correct option is D - Dispersion bonds.
To know more about the dispersion bonds, visit;
https://brainly.com/question/30402657
#SPJ6
Atoms of which elements form bonds without satisfying the octet rule?
Answer:
Helium and hydrogen......
A student dissolves 10.7 g of lithium chloride (LiCl) in 300. g of water in a well-insulated open cup. He then observes the temperature of the water rise from 22.0 °C to 28.6 °C over the course of 3.8 minutes. Use this data, and any information you need from the ALEKS Data resource:
LiCl(s) rightarrow Li+(aq) + Cl-(aq)
You can make any reasonable assumptions about the physical properties of the solution. Note for advanced students: it's possible the student did not do the experiment carefully, and the values you calculate may not be the same as the known and published values for this reaction.
1) Is this reaction exothermic, endothermic, or neither?
2) If you said the reaction was exothermic or endothermic, calculate the amount of heat that was released or absorbed by the reaction in this case.
3) Calculate the reaction enthalpy delta Hrxn per mole of LiCl.
Answer:
1) Exothermic.
2) [tex]Q_{rxn}=-8580J[/tex]
3) [tex]\Delta _rH=-121.0kJ/mol[/tex]
Explanation:
Hello there!
1) In this case, for these calorimetry problems, we can realize that since the temperature increases the reaction is exothermic because it is releasing heat to solution, that is why the temperature goes from 22.0 °C to 28.6 °C.
2) Now, for the total heat released by the reaction, we first need to assume that all of it is absorbed by the solution since it is possible to assume that the calorimeter is perfectly isolated. In such a way, it is also valid to assume that the specific heat of the solution is 4.184 J/(g°C) as it is mostly water, therefore, the heat released by the reaction is:
[tex]Q_{rxn}=-m_{Total}C(T_2-T_1)\\\\Q_{rxn}=-(300g+10.7g)*4.184 \frac{J}{g\°C} (28.6\°C-22.0\°C)\\\\Q_{rxn}=-8580J[/tex]
3) Finally, since the enthalpy of reaction is calculated by dividing the heat released by the reaction over the moles of the solute, in this case LiCl, we proceed as follows:
[tex]\Delta _rH=\frac{Q_{rxn}}{n_{LiCl}} \\\\\Delta _rH=\frac{-8580J}{10.7g*\frac{1mol}{150.91g} }*\frac{1kJ}{1000J} \\\\\Delta _rH=-121.0kJ/mol[/tex]
Best regards!
These properties best describe which body (Gases Surface, 75%H, 25% He, Zones)
(18 Points)
Planet
or
Sun
NO LINKS
Answer:sun
Explanation:The Sun is the star at the center of the Solar System. It is a nearly perfect sphere of hot plasma, heated to incandescence by ... When hydrogen fusion in its core has diminished to the point at which the Sun is no longer in . Sunlight on the surface of Earth is attenuated by Earth's atmosphere, so that less power arrives
. Which one is NOT an INDICATOR that a chemical has occurred
A) Gas is produced
B) Precipitate is produced
C) Change in energy
D) Change in mass
When NH3(g) reacts with O2(g) to form N2O(g) and H2O(l), 342 kJ of energy are evolved for each mole of NH3(g) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation.
Answer: [tex]2NH_3(g)+2O_2(g)\rightarrow N_2O(g)+3H_2O(l)+684kJ[/tex]
Explanation:
The skeletal thermochemical equation for the reaction is:
[tex]NH_3(g)+O_2(g)\rightarrow N_2O(g)+H_2O(l)+342kJ[/tex]
The balanced thermochemical equation for the reaction is:
[tex]2NH_3(g)+2O_2(g)\rightarrow N_2O(g)+3H_2O(l)+684kJ[/tex]
When 1 mole of [tex]NH_3[/tex] reacts with oxygen , heat released = 342 kJ
Thus when 2 moles of [tex]NH_3[/tex] reacts with oxygen , heat released = [tex]\frac{2}{1}\times 342 kJ=684kJ[/tex]
visible light travels from place to place as a
Answer:
Light can travel in three ways from a source to another location: (1) directly from the source through empty space; (2) through various media; (3) after being reflected from a mirror.
Explanation:
Lab: Measuring pH Table or
Lab Report please ( just link it ) please
Answer:
sorry my phone died lol but here are the answers
<3
different between intermolecular and intra molecular dehydration
Answer: Intermolecular bonds are the forces between the molecules. Intramolecular are the forces within two atoms in a molecule.
Explanation:
What type of chemical reaction is this?
2Na + 2H20 - 2NaOH + H2
The dehydration of the alcohol functional group is a widely used reaction in organic chemistry. The mechanism is generally accepted to always operate via an ______ step-wise process. The _____ mechanism process will always produce (after dehydration) a ________________ style alkene as major product. The driving force for the production of this ________________ style alkene product is generally going to be determined by stability of the ________ ____________.
Answer:
EliminationEliminationZaitsevZaitsevCarbocationExplanation:
The mechanism is generally accepted to always operate via an ELIMINATION step-wise process. The ELIMINATION mechanism process will always produce (after dehydration) a ZAITSEV style alkene as major productThe driving force for the production of this ZAITSEV style alkene product is generally going to be determined by stability of the CARBOCATIONElimination mechanism is the removal of two substituents from a molecule in either a one- or two-step mechanism
Carbocation is a molecule containing a positive charged carbon atom and three bonds
The mechanism is generally accepted to always operate via an elimination step-wise process. The elimination mechanism process will always produce (after dehydration) a Zaitsev style alkene as major product. The driving force for the production of this Zaitsev style alkene product is generally going to be determined by stability of the carbocation.
What is dehydration?
Dehydration is a process in which a water molecule releases from the given compound to form an unsaturated compound.
Dehydration process of alcohol is done by the elimination reaction in which water molecule eliminate and due to this dehydration we get an unsaturated product alkene. This dehydration process is go through the formation of carbocation which in turn forms the product. Stability of the product is determined by the Zaitsev rule and according to this rule most substituted product is the major and stable product.
Hence correct options are: Elimination, elimination, Zaitsev, Zaitsev and carbocation.
To know more about Zaitsev rule, visit the below link:
https://brainly.com/question/10099008
Which of the following must be overcome by a rocket's thrust?
Answer:
the payloads weight
Explanation:
a p e x on the ground stream
Answer:
The payload's weight
Explanation:
i just took the test on a pex :)
3. The name of the functional group in the following compound
CH3 - CH2 - CH2 - CH-CH2 - CH3
1
CH3 – CH2
a. Methyl
b. Ethyl
C. Propyl
d. Isopropy!
Answer: a.) Methyl would be the answer.
Explanation:
Compare Dalton’s and Democritus’ ideas.
Answer:
please give me brainlist and follow
Explanation:
The key difference between Democritus and Dalton atomic theory is that the Democritus atomic theory is an ancient theory that scientists later refined and elaborated whereas Dalton atomic theory is a comparatively modern, scientific theory that we cannot discard due its important statements.
What is the source of Earth's magnetic field according to what you have read in chapter 222
Answer:
Scientists know that today the Earth's magnetic field is powered by the solidification of the planet's liquid iron core. The cooling and crystallization of the core stirs up the surrounding liquid iron, creating powerful electric currents that generate a magnetic field stretching far out into space.
How much energy ( in joule ) does the Sun emit in one day (24 hours)? I've previously answered with 3.32, but it was incorrect. Please help thanks.
It is about 3.86 which is 10⁶⁶ watts
Answer:
410 quintillion Joules or 430,000,000,000,000,000,000 Joules
What type of Weathering is important to sand storms on Mars? Physical or
Chemical?
Why would 3D printing be important on Mars and why would you use material from the surface of Mars.
We could "print" things that we need on Mars.
We could print things that we need on Mars and use material that is already on the planet
It would be so cool
The cost would be less expensive.
Answer:
1. Physical Weathering
2. Option B
Explanation:
1. Physical weathering
On Mars, there are two types of weathering agents a) wind and b) acid fog. Thus, they will carry out only physical weathering
2. Option B
3D can be used to produce things that are required on the Mars and also the locally available raw material can be used for printing thereby saving the cost.