How many neutrons are there in 14 gram of c14?

the particular gas effusion was 21.0. and the methane effusion rate is 47.0 The molar mass of the unknown gas is approximately 28.6 g/mol

The process through which a gas manages to escape through with a small hole or highly permeable barrier is known as effusion. A gas's rate of effusion is inversely proportional to its molar mass squared. The following equation describes this relationship: rate1 / rate2 = (sqrt(molar mass2) / sqrt(molar mass1)). where rate1 and rate2 are the rates of effusion of the two gases and molar mass1 and molar mass2 are the molar masses of the two gases.Given the rate of effusion of the unknown gas is 21.0 mL/min, and the rate of effusion of pure methane (CH4) is 47.0 mL/min, we can use the above equation to find the molar mass of the unknown gas:

(21.0 mL/min) / (47.0 mL/min) = sqrt(molar mass unknown) / sqrt(16.04 g/mol)

Squaring both sides of the equation, we get:

(21.0 mL/min)^2 / (47.0 mL/min)^2 = (molar mass unknown) / (16.04 g/mol)

Solving for molar mass unknown we get:

molar mass unknown = (16.04 g/mol) * (21.0 mL/min)^2 / (47.0 mL/min)^2

The molar mass of the unknown gas is approximately 28.6 g/mol

Please note that the above calculation is based on the assumption that the temperature and pressure are the same for both gases and that the gases are ideal

Lear more about effusion here:

https://brainly.com/question/2655041

#SPJ4

The dz2 and the dx2-y2 orbitals have lobes that point directly at the ligands in a square-planar crystal field in d orbitals.

The d orbitals are a set of atomic orbitals found in the second energy level (n = 2) of an atom. They have a higher energy than the s and p orbitals in the first energy level (n = 1), and are represented by the letters d, dx, dy, dz and dxy, dxz and dyz.The d orbitals are composed of four orbitals which are degenerate (having the same energy) in an isolated atom. But when an atom is in a compound, the d-orbitals split into different energy levels due to the influence of the electrostatic forces of the neighboring atoms. This is called the crystal field splitting, which depends on the symmetry of the crystal and the coordination number of the central atom.

Learn more about atomic orbitals here:

https://brainly.com/question/29561958

#SPJ4

The basketball velocity is 40 m/s.

A vector quantity with both size and direction is velocity. In respect to time, it is the rate with which a displacement changes. Using the formula velocity = displacement/time, velocity may be computed. It is a way to gauge how quickly something is moving in a certain direction. Acceleration, or the rate at which an object's velocity changes, is closely related with velocity. Being a vector quantity, velocity has both a direction and a magnitude. An object must move at the a constant speed and in the same direction in order to maintain a constant velocity.

To learn more about velocity
https://brainly.com/question/29215982
#SPJ4

Answer:

One problem that people may encounter when using a hot and cold compress pillow is that the pillow may not stay hot or cold for a long enough period of time. This can be frustrating for people who are using the pillow to alleviate muscle pain or reduce inflammation, as they may need to continually reheat or refreeze the pillow in order to maintain its therapeutic benefits. To solve this problem, people may need to find a pillow that is better at retaining heat or cold, or they may need to use additional heating or cooling elements (such as hot water bottles or ice packs) in conjunction with the pillow.

Explanation:

The gas will have a volume of 25.0 mL at a pressures of 60 kPa or a temperature of 200 K.

The average kinetic potential of the particle in a system is measured by temperature. Temperature is measured using thermometers, which measure the temperature of a system by taking a reading of the system's average kinetic energy. Temperature is measured in degrees, with higher temperatures indicating a higher average kinetic energy. Temperature can be affected by a variety of factors, including the amount of energy added to or removed from a system, the number of particles present in the system, and the type of particles present in the system.

To learn more about temperature
https://brainly.com/question/2339046
#SPJ4

Beta decay occurs with a half-life of 25 minutes for the iodine isotope with mass number 128. For this procedure, 3→Te + iB is the balanced nuclear reaction.

Isotopes are two or more atom types that share the same atomic number (number of protons in their nuclei) and position in the periodic table (and, therefore, belong to the same chemical element). However, isotopes have different nucleon numbers (mass numbers) because they have varying numbers of neutrons in their nuclei. All isotopes of a given element have nearly identical chemical properties, but they differ in terms of atomic mass and physical characteristics.

The word "isotope" is derived from the Greek words isos, which means "equal," and topos, which means "place," meaning "the same location." The name refers to the fact that different isotopes of the same element occupy the same spot on the periodic table.

Learn more about isotope here:

https://brainly.com/question/12955625

#SPJ4

Pressure inside a helium balloon: The helium atoms expand and press on the surface of the balloon.

Helium balloons are a type of balloon filled with helium gas. Helium is a light, non-flammable, inert gas that is found in abundance in the atmosphere and is used to inflate balloons. Helium balloons are often used in decorations, promotions, special events, parties, and displays. They come in a variety of shapes, sizes, and colors, and can be filled with helium and released into the atmosphere, creating a festive atmosphere. Helium balloons are also used in scientific experiments, such as measuring wind speeds, studying atmospheric pressure and air movement, and measuring the temperature of the atmosphere.

To learn more about helium balloon
https://brainly.com/question/29311706
#SPJ1

The isostasy is relates to  the buoyancy , the deepest oceans depths relates to the trench, the theory of the crustal structure relates to the plate tectonics.

The match  the following for the given options are given below as follows :

1 ) isostasy                               buoyancy

2) deepest ocean depths        trench

3) drowned glaciated valley     fjord

4) theory of crustal structure   tectonic plates

5)  oceanic plate going down   subduction

The above are the correct order for the given following relations. these given options are related to the earth movement. like isostasy is the rising or the settling of the part of the earth's lithosphere.

To learn more about tectonic plates here

https://brainly.com/question/998575

#SPJ4

The energy of a photon can be calculated using the formula: E = hν = hc/λ, where E is the energy, h is Planck's constant (6.626 x 10^-34 Js), ν is the frequency, c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength which is 6.53 x 10^-38 kJ/mol

Part A: ν = 5.95 x 10^19 s^-1

E = hν = (6.626 x 10^-34 Js) x (5.95 x 10^19 s^-1) = 3.948 x 10^-14 J/photon

To convert to kilojoules per mole, we need to divide by Avogadro's number (6.022 x 10^23 photons/mol)E = (3.948 x 10^-14 J/photon) / (6.022 x 10^23 photons/mol) = 6.53 x 10^-38 kJ/mol

Part B: ν = 20.00 x 10^3 s^-1

E = hν = (6.626 x 10^-34 Js) x (20.00 x 10^3 s^-1) = 1.325 x 10^-31 J/photon

To convert to kilojoules per mole, we need to divide by Avogadro's number (6.022 x 10^23 photons/mol). E = (1.325 x 10^-31 J/photon) / (6.022 x 10^23 photons/mol) = 2.20 x 10^-55 kJ/mol. Part C: λ = 2.57 x 10^2 m. E = hc/λ = (6.626 x 10^-34 Js) x (2.998 x 10^8 m/s) / (2.57 x 10^2 m) = 3.948 x 10^-14 J/photon. To convert to kilojoules per mole, we need to divide by Avogadro's number (6.022 x 10^23 photons/mol) .E = (3.948 x 10^-14 J/photon) / (6.022 x 10^23 photons/mol) = 6.53 x 10^-38 kJ/mol. In all the parts, the energy is expressed in kilojoules per mole to three significant digits.

Learn more about  Planck's constant here:

https://brainly.com/question/27389304

#SPJ4

moles of HCl are reacting is [tex]135\times10^{-3}[/tex]

In the International System of Units, the mole is used to measure material quantity. The number of a substance's elementary entities that are present in an object or sample depends on the amount of that substance. A solute's molar concentration is used to represent how much of a solute there is per unit volume of a solution or how much of a chemical species there is in a solution.

Magnesium reacts with hydrochloric acid to generate a salt of magnesium chloride and release hydrogen gas.

Mg(s) +HCl(aq) [tex]\rightarrow[/tex] [tex]MgCl_{2}[/tex](aq)+[tex]H_{2}[/tex](g)

molarity =[tex]\frac{moles of solute}{volume of solution \:(l)}[/tex]

molarity of Mg is 3.0M volume of solution is 45ml

now, 3M=[tex]\frac{moles of solute}{45\times 10^{-3} \:(l)}[/tex]

moles of mg = 135 millimoles.

now according to the reaction by using stoichiometry

moles of Mg = moles of HCl

moles of HCl =135 millimoles =[tex]135\times10^{-3}[/tex]

Learn more about moles.

brainly.com/question/26416088

#SPJ4

By treating 54.0 grams of aluminum with a solution of zinc chloride, ZnCl, 328.6g/mol of zinc metal will be created.

The molar mass of a substance is its mass expressed in grams per mole. As shown in this video, the molar mass of a substance can be calculated by adding the molar masses of the substance's component atoms. The number of moles in the substance can then be calculated from its molar mass and converted to mass.

Balance chemical reaction,

2Al + 3ZnCl₂ → 2AlCl₃ +3Zn

Molar mass of aluminum is 27.99g/mol

Molar mass of zinc chloride is 136.29g/mol

The mole ratio of ZnCl₂ to Al is 3:2

Grams →  moles  → moles → grams

45Al × 1mol Al/27.99g Al × 3 mol ZnCl₂/2 mol Al × 136.29 g ZnCl₂/1 mol ZnCl₂

on simplification,

45×3×136.29/27.99×2 = 328.6g/mol.

To know more about molar mass visit:

https://brainly.com/question/12127540

#SPJ4

To solve this we must be knowing each and every concept related to  potassium level. Therefore, the correct option is option A that is Obtain an ECG.

This condition is known as hyperkalemia, or excessive potassium. The Mayo Clinic states that the potassium level in blood should be between 3.6 to 5.2 millimoles a liter (mmol/L).

Critically high potassium levels are those over 5.5 mmol/L, while levels above 6 mmol/L could be lethal. A nurse is caring for a client who has a serum potassium level of 3.1 mEq/L. She should Obtain an ECG.

Therefore, the correct option is option A that is Obtain an ECG.

To learn more about potassium level, here:

https://brainly.com/question/28312883

#SPJ1

Hazardous materials are substances or chemicals that pose a health hazard, a physical hazard, or harm to the environment.

To learn more about hazardous materials refers to:

brainly.com/question/27318175

#SPJ1

H2(g) + Cl2(g) = 2 HCl (g) AH-184.6 kJ where the mathematical notation for "is equivalent to" is. However, we also have a quantity called energy change in our thermochemical equation

Thermochemical equations are symmetric chemical equations that take into account both the energy change and the physiological state of all products and reactants. When energy is a reactant, a reaction is endothermic; whereas, when energy is a product, a reaction is exothermic.

A balance empirical formula with its heat per reaction is known as a thermochemical equation. They appear to be equal to A+B+C+H=Xjoules. You are already proficient at creating and balancing chemical equations. Therefore, all we must do is add either H or U values.

To know more about Thermochemical equation visit:

brainly.com/question/2874342

#SPJ1

The molar conductivity of KCl at this concentration and  transport numbers and molar ionic conductivity of K+ and Cl– are

Generally, The transport number, t, of an ion can be calculated using the equation: t = (μi x Ci) / Λm,

where

Given that the electric mobility of

K+ is 5.9 x 10^-4 cm^2 V^-1 s^-1, the electric mobility of Cl- is 6.14 x 10^-4 cm^2 V^-1 s^-1, and the concentration of KCl is 0.30 mol L^-1, we can calculate the transport numbers as:

t(K+) = (5.9 x 10^-4 cm^2 V^-1 s^-1 x [K+]) / Λm t(Cl-)

= (6.14 x 10^-4 cm^2 V^-1 s^-1 x [Cl-]) / Λm

where

[K+] and [Cl-] are the molar concentrations of K+ and Cl- ions, respectively.

The molar ionic conductivity, Λi, of an ion can be calculated using the equation: Λi = μi x Ci,

where

Given that the electric mobility of K+ is 5.9 x 10^-4 cm^2 V^-1 s^-1 and the concentration of K+ is 0.15 mol L^-1, the molar ionic conductivity of K+ is:

Λ(K+) = 5.9 x 10^-4 cm^2 V^-1 s^-1 x 0.15 mol L^-1

Λ(K+) =8.85×10−5

Similarly, given that the electric mobility of

Cl- is 6.14 x 10^-4 cm^2 V^-1 s^-1 and the concentration of Cl- is 0.15 mol L^-1, the molar ionic conductivity of Cl- is:

Λ(Cl-) = 6.14 x 10^-4 cm^2 V^-1 s^-1 x 0.15 mol L^-1

Λ(Cl-) =9.21×10^−5

Finally, the molar conductivity of KCl can be calculated as:

Λm = Λ(K+) + Λ(Cl-)

=9.21×10^−5+8.85×10^−5

Λm =1.806×10−4

The transport numbers of K+ and Cl- can be calculated by

t(K+) = Λ(K+) / Λm and

t(Cl-) = Λ(Cl-) / Λm respectively.

t(K+) = 8.85×10−5/1.806×10−4 '

t(K+)=4.90033223×10^−9

and

t(Cl-) =9.21×10^−5/1.806×10−4

t(Cl-) =5.09966777×10^−9

Read more about molar conductivity

https://brainly.com/question/26097545

#SPJ1

The theoretical yield of water in this reaction is 1 mole (18.015 grams) of water.

Theoretical yield is the amount of a product one would expect to yield from a reaction if it proceeds to completion, according to a balanced chemical equation. It is calculated by multiplying the limiting reactant by the molar ratio between the reactants and the products. The actual yield of a reaction is usually lower than the theoretical yield, due to a number of factors such as incomplete conversion of reactants to products, product losses, and impurities in the reactants. Theoretical yield is used to calculate the percentage yield of a reaction, which is the ratio of the actual yield to the theoretical yield multiplied by 100.

To learn more about theoretical yield
https://brainly.com/question/30068550
#SPJ4

Answer:

360.g water

Explanation:

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore,  the volume of oxygen needed to completely react with 171.9 g of S8 at STP is 180.09L.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

S[tex]_8[/tex](s) +12O[tex]_2[/tex](g) →8SO[tex]_3[/tex](l)

171.9 g of S8

mole of  S[tex]_8[/tex]=  171.9 g/ 256.52g/mol

                 =0.67mol

The mole of oxygen = 12×0.67

                                = 8.04mol

volume of oxygen= 22.4× 8.04

                            =180.09L

Therefore,  the volume of oxygen needed to completely react with 171.9 g of S8 at STP is 180.09L.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

A balanced nuclear equation for power generation by nuclear fission is given below:

The process of nuclear fission involves the splitting of an atom's nucleus into two or more smaller nuclei. Even by the energetic standards of radioactive decay, the fission process releases a very high quantity of energy and frequently results in gamma photons.

Nuclear fission is applied in nuclear power generation in a nuclear reactor.

The fissionable nuclear material is separated in the nuclear reactor so that a critical mass cannot exist, and the neutron flux and absorption are controlled to stop the fission reactions. The energy released during fission processes in a nuclear reactor used to generate electricity is trapped as thermal energy and used to heat water and create steam. The steam is utilized to turn a turbine, which powers an electricity-generating generator.

Learn more about nuclear fission at: https://brainly.com/question/3992688

#SPJ1

Yes carbon dioxide and oxygen are inversely related to each other.

Bohr effect is a result of the effect of carbon dioxide has on hemoglobin affinity for oxygen. Bohr's effect describes the hemoglobin's lower affinity for oxygen secondary to increases in the partial pressure of the carbon dioxide and decreases the pH of blood. This lower affinity, in turn, enhances the unloading of oxygen into the tissues to meet the oxygen demand of the tissue.

Thus, the relationship between CO₂ and hemoglobin affinity for oxygen can be described as an inverse relationship meaning when one goes one way, and the other goes the other way.

To know more about oxygen here

https://brainly.com/question/13370320

#SPJ4

The 1.5 ml of a 10% solution that was made into a 3.0 ml solution by adding normal saline now has a new concentration of 5%.

The amount of material in a certain area is referred to as concentration in chemistry. Another definition states that concentration is the ratio of a solution's solute to its entire solution or solvent. Mass per unit volume is a common way to express concentration. However, moles or units of volume can also be used to express the solute concentration. Concentration could be per unit mass instead of volume. Concentration can be computed for any mixture, despite often being used with chemical solutions.

By mathematically dividing the mass, moles, or volume of the solute by the mass, moles, or volume of the solution, one may calculate the concentration (or, less commonly, the solvent).

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ4

The following substances does not exist in the indicated solid type : c.) SiO₂- molecular.

SiO2 is a covalent solid and the solid state of silicon dioxide (SiO2) is a covalent crystal with sharing of valence electrons between the silicon atom and oxygen atoms.

Silicon dioxide is a silicon oxide made of linear triatomic molecules in which silicon atom is covalently bonded to two oxygens. Silicon dioxide which is often called silica is the main compound found in sand.

Silicon dioxide is not soluble in water as the interaction between SiO2 and water molecules is not sufficient to overcome the strong and extensive covalent bonds in giant molecule.

To know more about SiO2, refer

https://brainly.com/question/966891

#SPJ4

When ocean water that is more dense (colder or saltier) is mixed with water that is less dense (warmer or less salty), the denser water will sink to the bottom and the less dense water will rise to the top. This is known as stratification, and it helps to create distinct layers in the ocean.

This stratification can create an environment that is more conducive to life, as it allows different types of organisms to inhabit different layers of the ocean.

The different layers of the ocean created by stratification play a significant role in the global climate system. Colder, denser waters are usually found at the bottom of the ocean, while warmer, less dense waters are found near the surface.

This temperature difference creates a natural convection system that drives currents throughout the ocean, which helps to regulate temperatures on a global scale. Additionally, stratification can also affect the amount of oxygen in the ocean.

Learn more about density of the ocean:

https://brainly.com/question/28819040

#SPJ4

The boiling point will be lower, because water boils when its vapor pressure is equal to atmospheric pressure.

Atmospheric pressure is described as the force exerted on a surface by the air above it as gravity pulls it to Earth. Atmospheric pressure is commonly measured with a barometer.

If you are at 8 000 m above sea level, the air pressure is lower than one atmosphere and the equilibrium between the water and air pressures will be reached before.

In conclusion, Atmospheric pressure is caused by the weight of the air molecules above.

Learn more about Atmospheric pressure at: https://brainly.com/question/19587559

#SPJ1

The boiling point of water at 8000m above sea level where air pressure is lower would be significantly lower.

The boiling point of water decreases as the air pressure decreases. At an altitude of 8000 meters above sea level, the air pressure is significantly lower than it is at sea level, so the boiling point of water would also be significantly lower.

At sea level, the normal boiling point of water is 100 degrees Celsius (212 degrees Fahrenheit) at a standard atmospheric pressure of 101.3 kPa. As the altitude increases, the atmospheric pressure decreases, so the boiling point of water decreases as well.

Find out more on boiling point of water at https://brainly.com/question/18188829

#SPJ1

The aforementioned claim is TRUE; as carbon-14 degrades steadily, it can be used to accurately estimate the age of rock samples.

The radioactive isotope of carbon 14 (14C) decays at a constant, well-known pace. Scientists can ascertain how long ago an organic substance died by calculating the quantity of 14C present in a sample of the material, such as bone or wood. This process, known as radiocarbon dating, is frequently used in geology and archaeology to date objects that are up to 50,000 years old.

Since carbon-14 decays steadily, it provides a trustworthy way to estimate the age of rock samples.

To know more about carbon-14 visit: https://brainly.com/question/4206267

#SPJ4

Answer:

Explanation:

The equilibrium constant (Kc) is a measure of the relative concentrations of the reactants and products at equilibrium for a given chemical reaction. It is defined as the ratio of the product concentrations raised to their stoichiometric coefficients, to the reactant concentrations raised to their stoichiometric coefficients. For a general reversible reaction

aA + bB <=> cC + dD

The equilibrium constant is defined as:

Kc = [C]^c [D]^d / [A]^a [B]^b

where [X] represents the concentration of species X (in molarity units), and the superscripts on the concentrations represent the stoichiometric coefficients of the species in the balanced equation for the reaction.

The reaction quotient (Qc) is similar to the equilibrium constant, but it is calculated using the concentrations of the reactants and products at a given point in time, rather than at equilibrium. The reaction quotient is also defined as the ratio of the product concentrations raised to their stoichiometric coefficients, to the reactant concentrations raised to their stoichiometric coefficients, and is calculated using the same equation as Kc, but with the concentrations at a specific point in time, rather than at equilibrium.

Qc = [C]^c [D]^d / [A]^a [B]^b

It can be used to predict the direction of reaction depending on the sign of Qc, Kc.

If Qc < Kc, the reaction will shift in the direction of products.

If Qc > Kc, the reaction will shift in the direction of reactants

If Qc = Kc, the reaction is at equilibrium.

If you want to know more about equilibrium reaction you can check on Le Chatelier's principle.

Travelling from left to right through a period of such a periodic table reduces the size of both atom.

Traveling from left to right inside a period of such periodic table causes the size of the atom to shrink. The number of protons and the positive nuclear energy both rise with such an increasing in the atomic number. The diameter of the atom shrinks as the nucleus draws the outermost electron.

Since they are eager to give up electrons and form cations, the substances on the left column of the periodic table possess low ionization energies.

To know more about period

https://brainly.com/question/16061498

#SPJ4

The specific heat capacity of the metal is 35.34 J/g/°C, if the specific heat capacity of the water is 4.18 J/g/°C.

Volume of water = 200 ml

Density of water = 1 gm/ml

So the mass of the water in coffee cup, m₁ = 200×1 = 200 gm

Initial temperature of water, T₁ = 22.1°C

Specific heat capacity of water, S₁ = 4.18 J/g/°C

Mass of the metal, m₂ = 5.1 gm

Initial temperature of the metal, T₂ = 48.6°C

Final combined temperature of both, T = 26.8°C

Let the specific heat capacity of the metal = S₂

Heat gain by the water = heat loss in the metal

S₁ × m₁ × (T-T₁) = S₂ × m₂ × (T₂-T)

4.18 × 200 × (26.8-22.1) = S₂ × 5.1 × (48.6-26.8)

3929.2 = S₂ × 111.18

S₂ = 3929.2/111.18

S₂ = 35.34 J/g/°C

So, the specific heat capacity of the metal is 35.34 J/g/°C.

To know more about specific heat capacity, here

https://brainly.com/question/29766819

#SPJ4

The overall charge of an atom or ion is negative if the number of electrons is greater than the number of protons.

A subatomic particle with a negative charge is called an electron. It is found outside the nucleus of an atom and is one of the main constituents of matter. Electrons are responsible for the chemical properties of atoms and thus play an important role in chemical reactions. Electrons have low mass and move around the nucleus at relativistic speeds. They are also responsible for the electrical and magnetic properties of atoms, and for the transmission of light and other forms of energy. Electrons can also interact with other particles and form complex structures, such as molecules.

To learn more about electron
https://brainly.com/question/26084288
#SPJ4

Yes, magnesium is a metallic element and is a member of the alkaline earth metals group.

What is  Magnesium?

Magnesium is a chemical element with the symbol Mg and atomic number 12. It is a silvery-white, highly reactive metal that is essential for many biological processes. Magnesium is the eighth most abundant element in the Earth's crust and the fourth most abundant element in the human body.

It is an important component of many enzymes, proteins, and other molecules. Magnesium is found naturally in many foods, including green vegetables, nuts, and grains. Magnesium plays a role in maintaining normal muscle and nerve function, keeping a healthy immune system, regulating blood sugar levels, and helping to form strong bones.

To learn about more Magnesium.

brainly.com/question/25860912

#SPJ1