I need some chemistry help
Thank u

Answer is option C) Have low melting points.

Explanation:

As is common knowledge, small molecules make up molecular compounds, and these small molecules are held together by an intermolecular force. The intermolecular tensions in this situation are incredibly weak and simple to overcome when breaking it. Therefore, molecular compounds have low melting and boiling points because of weak intermolecular interactions.

Chemical substances known as molecular compounds assume the shape of distinct molecules. Examples include common substances like carbon dioxide and water. These substances differ significantly from ionic substances like sodium chloride. When metal atoms give up one or more of their electrons to nonmetal atoms, ionic compounds are created. The resultant cations and anions are drawn to one another electrostatically.

To learn more about molecular compounds visit;

https://brainly.com/question/23088724

#SPJ4

Answer:

a) red, blue, and violet

b) orange, yellow, and green

C) red, orange, and yellow

D) blue, indigo, and violet​

The measurement of expired CO₂ that typically provides a numeric display of the partial pressure of CO₂ in torr or mmHg is the capnometry.

The capnometry measurement of the  CO₂ , carbon dioxide is the measurement in the expired air and it provides the clinician with the noninvasive measurement of systemic metabolism and the ventilation. it is used to determine the correlation in between the tidal CO₂  and the partial CO₂  in the non intubated breathless patents.

Thus, the measurement if the expired CO₂  that shows the partial pressure of the CO₂  is the capnometry.

To learn more about pressure here

https://brainly.com/question/9226237

#SPJ4

An oxide of chromium crystallizes with the following unit cell (chromium = gray; oxygen = red)(Figure 1) --CrO3

In order to determine the formula of the oxide, we need to determine the ratio of chromium to oxygen atoms in the unit cell. From the provided unit cell, we can see that there is one chromium atom (gray) in the center of the unit cell, and four oxygen atoms (red) surrounding it. This gives us a ratio of 1:4 chromium to oxygen, which simplifies to a ratio of 1:4 or 1/5. Therefore, the formula of the oxide is CrO4.An oxide is a chemical compound that contains at least one oxygen atom and one other element. Oxides can be either inorganic or organic, depending on the element that is combined with oxygen. Inorganic oxides are compounds composed of a metal and oxygen. They can be further classified as acidic, basic or neutral depending on the oxidation state of the metal atom. Examples of inorganic oxides include water (H2O), carbon dioxide (CO2), sulfur dioxide (SO2), and nitrogen dioxide (NO2)

To learn more about oxide here:

https://brainly.com/question/9496279

#SPJ4

The protein concentration is higher than that of interstitial fluid. The intracellular fluid (ICF) is the fluid inside cells, and is composed of water, electrolytes, and organic molecules.

The intracellular fluid (ICF) is the fluid inside cells, and is composed of water, electrolytes, and organic molecules. Common properties of ICF include high concentrations of potassium ions and low concentrations of chloride ions compared to interstitial fluid. The protein concentration of ICF is lower than that of interstitial fluid.

The protein concentration is higher than that of interstitial fluid.

learn more about fluid here

https://brainly.com/question/28445909

#SPJ4

Answer:

A

Explanation:

because its the only one that can be tested

The number of moles of MgCO3 that is present in the given mass of magnesium carbonate is 2.99 moles.

The number of moles can be defined as the ratio of given mass over molar mass. The chemical that is given is magnesium carbonate having molar mass of 84.314 g/mol and the given mass of the same is 252.939 grams.

The formula for number of moles that is 'n' can be given as follows:

n= m/M where m is the given mass and M is the molar mass.

Substituting the values,

n= 252.939 grams /84.314 grams/mol

n=2.99 moles

Therefore, the number of moles of MgCO3 is 2.99 moles.

To learn more about number of moles check the link below:

https://brainly.com/question/23949935

#SPJ4

One gram of a chemical is equivalent to one mole.

A physical characteristic called the molar mass is calculated by dividing the mass of a given substance by the substance's volume. The standard relative atomic mass of an element is multiplied by the molar mass constant, 1 × 10⁻³ kg/mol = 1 g/mol, to determine the molar mass of its atoms. A compound's molar mass is calculated by adding the standard atomic weights of the constituent atoms and multiplying the result by the molar mass constant.

One atom or molecule has the same mass in grams as one mole of a substance does in atomic mass units.

To know more about mole click here

https://brainly.com/question/15356425

#SPJ4

Answer:

Water is a compound because it is made up of water molecules. There is no such thing as water atoms. Water molecules are made of hydrogen and oxygen atoms, in the definite proportion of two hydrogens for one oxygen.

Explanation:

The difference between a molecule and a compound is this:

A molecule consists of two or more atoms joined by a chemical bond.

A compound consists of two or more different atoms joined by chemical bonds.

Water (H2O) is both a molecule and a compound.

Hydrogen gas (H2) and oxygen gas (O2) are molecules but because the atoms of which they are made are not different, they do not qualify as compounds.

According to the given chemical equation and stoichiometry of it , 36 moles of H₃PO₄ are formed from 9 moles of P₄O₁₀.

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.

As per the reaction, 1 mole of P₄O₁₀ produces 4 moles of  H₃PO₄, thus 9 moles of  P₄O₁₀ will produce 9×4=36 moles of H₃PO₄.

Thus,36 moles of H₃PO₄ are formed from 9 moles of P₄O₁₀.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ1

Answer:36

Explanation:

taking the class just got it right

If the actual yield and percent yield are 51.4g and 77.0%, respectively, calculate the theoretical yield. We predicted a theoretical yield of 13 grams for the reaction of Na with Cl2.

Yield is determined by dividing the principal amount by the net realized return. Gains and returns on stock investments, for instance, can take one of two kinds. On the basis of the chemical equation's stoichiometry, theoretical yield is computed. Experimental data are used to determine the real yield. Calculating the ratio of actual yield to theoretical yield yields the percent yield. The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield multiplied by 100% divided by the experimental yield.

Learn more about reaction here-

https://brainly.com/question/28984750

#SPJ4

In a container, the pressure of hydrogen sulfide gas is 267.4 torr.

The force of all gas particle/wall collisions divided by the area of the wall is defined as pressure (P): Pressure is one of the primary observable quantities of this phase of matter; it is exerted by all gases. The amount of force exerted per area is described as pressure. Pressure is defined as force divided by area. The pressure from snow on a roof, for example, would equal the weight of the snow divided by the area of the roof. In chemistry, pressure is often generated by gases. When you blow up a balloon, you fill it with gas.

Here,

pressure of hydrogen sulfide gas= 35650 Pa

1 torr=133.33 Pa

=35650/133.33

=267.38 torr

The pressure of hydrogen sulfide gas in a container is 267.4 torr.

To know more about pressure,

https://brainly.com/question/14760196

#SPJ4

Heat engine is a system that converts thermal energy into a form of useful mechanical or electrical energy.

In thermodynamics, the heat engine is a system which is able to convert the heat or thermal energy into mechanical or electrical energy which can be used in order to perform mechanical work. This is achieved by bringing the a particular working substance to a lower state temperature from a higher state temperature.

There are a different types of heat engines in which the Carnot engine possesses the maximum efficiency. Some examples of heat engines are firearms, thermal power station etc.

Hence, the correct option is b. heat engine.

To know more about heat engine here

https://brainly.com/question/28034387

#SPJ4

An acidic solution has a pH over 7 and contains more hydrogen ions than hydroxide ions. Any aqueous solution with a pH lower than 7.0 ([H+] more than 1.0 x 10-7M) is said to be acidic.

A  acidic solution that uses water as its solvent is said to be aqueous. Acidic solutions are sour in contrast to alkaline solutions, yet it's never a good idea to taste an unidentified solution. Any solution that contains more hydrogen ions per volume of solution than water is an acidic solution; contrasted with acidic solutions are basic or alkaline solutions. Atomic number 1 and the letter H stand for the chemical element hydrogen. The element hydrogen is the lightest.

Learn more about  acidic solution here

https://brainly.com/question/13208021

#SPJ4

If there are 6 atoms of hydrogen on the products side, then there would be 6 atoms of hydrogen also on the reactants side. That would be 3 molecules of [tex]H_2[/tex].

According to the law of conservation of atoms or matter, atoms can neither be destroyed nor created during the course of chemical reactions. However, atoms can change forms during reactions.

Going by this law, it means the number of atoms of a particular element must remain constant before and after chemical reactions. Otherwise, we will say the chemical equation of such reactions are not balanced.

Thus, if there are 6 atoms of hydrogen on the products side of a reaction, 6 atoms of hydrogen must also be on the reactants side of the reaction. A molecule of hydrogen, [tex]H_2[/tex], has 2 atoms of hydrogen. This means 3 molecules of hydrogen must be on the reactants side in order to have a total of 6 hydrogen atoms.

More on law of conservation of atoms can be found here: https://brainly.com/question/2175724

#SPJ1

Answer:

C- It has been examined, tested and supported over centuries.

Explanation:

The conservation of mass is a scientific law that states that matter cannot be created or destroyed, only transformed from one form to another. This law has been extensively tested and supported over centuries of scientific investigation, and it is considered to be a fundamental principle of chemistry and physics.

The evidence for Darwin's theory of evolution is the consistency of the sequence of fossils from early to recent.

Changing populations and species of organisms are at the heart of biological evolution. The British naturalist Charles Darwin is most likely the first individual that comes to mind today when we discuss evolution. The biological evolution via natural selection theory was put out by British biologist Charles Darwin. Darwin believed that species change over time, give rise to new species, and descended from a single ancestor through the process of evolution. Charles Darwin's theory of evolution is known as natural selection. Animals with heritable qualities that aid in survival and reproduction will often generate more offspring than their contemporaries due to the limited resources in nature, increasing the frequency of such traits through subsequent generations.Populations change throughout time through natural selection, becoming increasingly adapted to their surroundings. Natural selection is reliant on the environment and necessitates the presence of heritable variation within a population.

Learn more about Darwin's theory of evolution

brainly.com/question/25718754

#SPJ4

Using a logarithmic scale with 7 as neutral, lower values are more acidic and higher values are more alkaline, the acidity or alkalinity of a solution is expressed. where c is the number of moles of hydrogen ions present per litre. So pH 2 is 1000 times stronger than pH 5, and vice versa.

For instance, a pH of 2 is 10,000 times more acidic than a pH of 3 and a pH of 5 is 10,000 times more acidic. Ten times as alkaline as a pH of 10 is a pH of 11.

Each whole pH value is ten times more acidic than the next higher value since the pH scale is logarithmic.

To know more about pH visit:-

https://brainly.com/question/15289741

#SPJ1

The ma le repr0 ductive system includes made up of internal organs such as the prostate gland, vas deferens, as well as ure thra as well as external geni talia like the pe nis, tes tes, as well as scrot um.

The health of something like the male reproductive system and the hormo nes secreted by the brain determine a man's fertility as well as sexual characteristics.

The human reproductive system would be the organ system primarily charged of creating and fertilizing gametes (eggs but rather sperm) as well as carrying a fetus. The gonads of both se xes create gametes.

The ov aries, fallopian tubes, uterus, cervix, as well as vagina are all parts of the female repro ductive system. It comprises the pe nis, prostate, as well as tes tes in men.

To know more about repro ductive system

https://brainly.com/question/14235396

#SPJ4

E) The most significant and prevalent greenhouse gas is water vapor. Ozone, carbon dioxide, methane, nitrous oxide, and other gases are also present.

Over the past 150 years, almost all of the rise in atmospheric greenhouse gases has been caused by human activities. Burning fossil fuels for transportation, electricity, and heating is the primary human activity in the United States that contributes to the emission of greenhouse gases.

The greenhouse gases on Earth warm the planet by storing heat in the atmosphere. Carbon dioxide, methane, nitrous oxide, and water vapor—all of which are found naturally—as well as fluorinated gases—which are made—are the main gases that cause the greenhouse effect.

To learn more about water vapor here:

https://brainly.com/question/14529481

#SPJ1

Elements of group 18 belongs to the family of noble gases with a general electronic configuration ns²np⁶,  where the valence shell is completely filled.

The elements of group 18 are considered to be noble because they have a completely filled valence shell due to which they donot have the tendency to gain, lose or share their valence electrons with other atoms. Thus, they are highly unreactive.

The elements belonging to noble gas family are:  Helium (He), Neon (Ne), Argon(Ar), Krypton(Kr), Xenon(Xe), Radon(Rn).

under conditions of standard pressure and temperature, these elements exists as gases with very low chemical reactivity so they are known as inert gases.

To know more about group 18 elements here

https://brainly.com/question/29355055

#SPJ4

Mg + 2HCl → H2 + MgCl2 because The reaction between magnesium and hydrochloric acid produces hydrogen gas and magnesium chloride.

Molecules are the smallest unit of a chemical compound that can exist independently and remain unchanged in chemical composition. A molecule is composed of two or more atoms that are chemically bonded together. A molecule can be made up of different elements, such as carbon, hydrogen, oxygen, and nitrogen, and can be composed of a variety of combinations of these elements. Molecules are essential components of all living things, as they are important for basic functions such as energy transfer, metabolism, and cell structure.

To learn more about molecule visit:

brainly.com/question/475709

#SPJ1

The new volume in litres is 13.29 L.

Given,

Temperature 1 (T₁) = 298 K

Volume 1 (V₁) = 15 L

Temperature 2 (T₂) = 383 K

Pressure 1 (P₁) = 3.36 atm

Pressure 2 (P₂) = 4. atm

By Ideal Gas Equation,

P₁V₁/T₁ = P₂V₂/T₂

⇒ (3.36*15)/298 = (4.90*V₂)/383

⇒50.4/298 = 4.90V₂/383

⇒ (50.4*383) / (298*4.90) = V₂

⇒ 19303.2/1460.2 = V₂

⇒13.29 L = V₂

New Volume will be 13.29 L.

Ideal gas law is a precise approximation of the behavioral of several gases under various situations in thermodynamics. The Ideal Gas Equation is a mathematical formula that combines empirical laws such as Charle's law, Boyle's law, Gay-law, Lussac's and Avogadro's law.

The equation characterizing the states of hypothetical gases stated mathematically by combinations of empirical or physical constants is known as the Ideal Gas Equation. It's also known as the universal gas equation. It is defined as follows:

"The ideal gas law seems to be the equation of state for a fictitious perfect gas. It is a decent approximation of the behavioral of various gases under numerous situations, while it has significant limitations".

To know more about the Ideal gas law, here

https://brainly.com/question/28257995

#SPJ4

Option B. It provides a single reference for all information about hazardous chemicals.

MSDS does not provide a single reference for all information about hazardous chemicals, but it does provide information on physical and chemical properties, potential hazards, and safe work practices.

The Material Safety Data Sheet (MSDS) is a document prepared by the manufacturer or supplier of a hazardous chemical which provides information about the physical and chemical properties of the hazardous chemical, potential hazards associated with it, and how to work safely with it. The MSDS is an important element of an effective chemical hazard communication system as it provides information on how to identify and protect against potential health hazards, proper storage and handling procedures, and proper disposal methods.

Learn more about MSDS: https://brainly.com/question/18638385

#SPJ4

The empirical formula for this compound containing 59.94 % carbon, 13.44 % hydrogen, and 26.62 % oxygen by mass is C3H8CO.

Given the % of carbon = 59.94%

The % of hydrogen = 13.44%

The % of oxygen = 26.62%

If a percentage is provided, we will assume that the entire mass is 100 grams. As a result, each element's mass is equal to the percentage indicated. Then

the mass of carbon (m1) = 59.94g

The mass of hydrogen (m2) = 13.44g

The mass of oxygen (m3) = 26.62g

We know the molar mass of C = 12 g/mole

The Molar mass of H = 1 g/mole

The Molar mass of O = 16 g/mole

The moles of carbon = 59.94/12 = 4.995

The moles of hydrogen = 13.44/1 = 13.44

The moles of oxygen = 26.62/16 = 1.664

Divide each mole value by the lowest computed mole number to get the mole ratio.

For C = 4.995/1.664 = 3 , For H = 13.44/1.664 = 8 and For O = 1.664/1.664 = 1. Then the empirical formula = C3H8CO

To learn more about hydrogen click here https://brainly.com/question/11837837

#SPJ4

Answer:

3 (e

Explanation:

The reason behind the acceptance of Darwin's theory is D It is supported by practical evidence and examples.

The theory of evolution proposed by Charles Darwin is a well sustained model that explains how animals change in order to adapt to an ever-changing enviroment, which is supported by scientific evidence and observations.

Therefore, with this data, we can see that the theory of evolution proposed by Charles Darwin is well sustained by evidence obtained from experimentation and also observations of the natural world.

Learn more about  the theory of evolution here:

https://brainly.com/question/19297177

#SPJ1

The number of moles of a monoprotic acid neutralized is equal to 0.025 mol.

A neutralization reaction can be defined as a reaction in which reaction of an acid and base generates salt and water. When a strong acid and a strong base react the salt can be neither acidic nor basic.

When monoprotic acid HA reacts with NaOH (a strong base), the resulting salt is NaA and water.

HA    +    NaOH   →   NaA  +   H₂O

Given, the concentration of NaOH = 0.544 M

The volume of the NaOH = 45.50 ml = 45.50 × 10⁻³

The number of moles of NaOH, n = M × V = 0.544 × 45.50 × 10⁻³ = 0.025 mol

The number of moles of HA monoprotic acid = moles of NaOH = 0.025 mol

Learn more about neutralization reaction, here:

brainly.com/question/20038776

#SPJ1