Answer: A.6
Explanation:
The total number of molecules in the chemical formula is 6
What is a molecule?
Molecules are the smallest particle of a substance that has all of the physical and chemical properties of that substance. Molecules are made up of one or more atoms.
The correct form of question will be:-6 molecule of methane CH₄
6CH4
a) 6 c) 10 c) 24 d) 30⇒ Number of aton of carbon is 6
⇒Number of atom of hydrogen is 24
⇒Total number of atom is 30
What is an atom ?
An atom is a particle of matter that neither be created nor be destroyed. An atom consists of a central nucleus that is usually surrounded by one or more electrons. Each electron is negatively charged. The nucleus is positively charged, and contains one or more relatively heavy particles known as protons and neutrons.
Learn more about molecules here: https://brainly.com/question/26044300
#SPJ2
The intermolecular forces between polymer molecules are strong, so these substances are __________ at room temperature. What word completes the sentence?
Answer:
I want to say
Stronger
can somebody please help me here ? i wanna make sure of my answer..
Answer:
[Unfortunately] Answer is A
Explanation:
You should know that 'liquid' is a state of matter and aqueous means that there is water present.
-It is mentioned that barium chloride is a solution. So you can cut off the C option.
-Barium sulfate is a salt which means it's a solid, so you can cut off the D option.
We now have A and B as the only options remaining.
-Dilute sulfuric acid is definitely not a liquid because water is present. (dilute indicates that there is a greater proportion of water)
The answer should be A.
according to iupac nomeclature rules which set of chemical name and formula for the same compound is correct?
Answer:
stock and traditional
Explanation:
the iupac says so
Does pure water conduct electricity? If not, what can we do to make it conduct electricity?.
an ideal gas is allowed to expand from 3.20L to 27.2L at constant temperature. By what factor does the volume increases
Answer:
Explanation:
This is just a ratio question. Factor of increase = 27.2 / 3.20 = 8.50
9
Ammonia is manufactured from nitrogen and hydrogen by the Haber process.
N2(g) + 3H2(g)2NH3(g)
What is the percentage yield when 60 kg of ammonia is produced from 60 kg of hydrogen?
A
5.9%
B
17.6%
с
35.3%
D
50.0%
Answer:
B
17.6%
Explanation:
1. Percentage yield = (Actual yield/theoretical yield) x 100
2. You know actual yield of ammonia (60kg) so you need to work out theoretical yield.
3. mols of hydrogen = m/mr = 60,000/2 = 30,000 mols.
4. 3:2 ratio so (30,000/3) x 2 = 20,000 mols of Ammonia.
5. Therefore mass of ammonia = mr x mols = 20,000 x 17 = 340,000 grams
6. So percentage yield is (60,000/340,000) x 100 = 17.6
The bowl of fruit has a mass of 2.2 kg.
What net force must act on the bowl of fruit to make it accelerate to the right
at a rate of 4.4 m/s2? (Hint: Use F = ma.)
A. F = 9.68 N right
B. F = 9.68 N left
C. F = 6.60 N left
D. F= 6.60 N right
Taking into account the Newton's second law, the correct answer is option A. F = 9.68 N right
In first place, acceleration in a body occurs when a force acts on a body.
Newton's second law states that a force will change the speed of an object because the speed and/or direction will change. These changes in velocity are called acceleration.
So, Newton's second law defines the relationship between force and acceleration mathematically. This law says that the acceleration of an object is directly proportional to the sum of all the forces acting on it and inversely proportional to the mass of the object
Mathematically, Newton's second law is expressed as:
F= m×a
where:
F = Force [N] m = Mass [kg] a = Acceleration [m/s²]In this case, you know:
F= ? m= 2.2 kg a= 4.4 m/s²Replacing in Newton's second law:
F= 2.2 kg× 4.4 m/s²
Solving:
F= 9.68 N
Finally, As the bowl of fruit accelerates to the right, the correct answer is option A. F = 9.68 N right
Learn more about the Newton's second law:
brainly.com/question/23845187?referrer=searchResults
brainly.com/question/13959891?referrer=searchResults
Write a balanced equation and name the products of the reaction CaCl2+Na3(PO4)
Answer:
3CaCl2 + 2Na3(PO4) → Ca3(PO4)2 + 6NaCl
Explanation:
DOUBLE REPLACEMENT REACTION
CaCl2 + Na3(PO4) → Ca3(PO4)2 + NaCl
3CaCl2 + 2Na3(PO4) → Ca3(PO4)2 + 6NaCl
calcium chloride + sodium phosphate → calcium phosphate + sodium chloride
Hope that helps
which compound contains both ionic and covalent bonds
Answer:
Any compound that contains a metal ion and a polyatomic ion would work. Polyatomic ions are covalently bonded non-metals that have some overall charge. Examples of common polyatomic ions include OH⁻ (hydroxide), NH₄⁺ (ammonium), and NO₃⁻ (nitrate). So answers to this question can be something like KOH (potassium hydroxide), but really, anything works if it contains a metal ion and a polyatomic ion.
calculate the number of atoms in a sample containing 3.5 g of silicon atoms
Answer:
there are 7. 505 x 1022 atoms in 3.5 grams of silicon.
Explanation:
So, 1 mole of silicon will have a mass of 28.0855 g and the number of atoms will be 6.022 x 1023. Therefore, there are 7. 505 x 1022 atoms in 3.5 grams of silicon.
Answer:
1 mole of silicon will have a mass of 28.0855 g and the number of atoms will be 6.022*1023 . Therefore , there are 7.505*1022 atom in 3.5 g of silicon .
which term best describes a unit of carbon dioxide?
Answer:
Molecule.
Explanation:
carbon and fluorine. Based on the bonding, a unit of carbon dioxideis described as a molecule.
Jane made this picture to represent a chemical reaction:
Two circles, one white and the other gray are shown on the left. A small portion of the two circles overlap and the label below the circles is XY. An arrow pointing right is shown on the right of the overlapping circles. There are two circles on the right of the arrow, one white and the other gray, and there is a plus sign between them. The white circle is labeled X and the gray circle is labeled Y.
Which of the following statements best explains the type of chemical reaction represented by Jane's picture? (5 points)
It represents a synthesis reaction because one combined reactant forms multiple products.
It represents a synthesis reaction because the same atoms are present in the reactants and products.
It represents a decomposition reaction because one reactant breaks apart and forms two products.
It represents a decomposition reaction because the total mass of the products is less than the mass of the reactant.
The reaction represents a decomposition reaction because XY is broken into its constituents.
A decomposition reaction is one in which the reactant is broken up into its constituents. In this case, the reactant is XY. The reactant is shown in the left hand side. The reactant is broken up to yield the products. X and Y.
Since the reactant was broken up into the one white and one gray circles labelled X and Y, then the reaction is a decomposition reaction.
Learn more about decomposition: https://brainly.com/question/24936069
Answer:
C if your answers are different!
Explanation:
1. Have scientists been able to invent a perpetual motion machine?
O Yes
O No
!!!SOMEONE HELP !!!
PLEASE
Answer:
use other websites u might have luck and find ur anwer
Explanation:
(
−
5
2
)
−
1
(
−
5
+
1
)
=
24
−
4
=
−
6
(−5+1)
(−5
2
)−1
=
−4
24
=−6
A sample of a certain gas has a volume of 452 mL at 711 mmHg and 26 degrees C. What would be the volume of this same sample of gas if it were measured at STP
The volume of this same sample of gas if it were measured at STP is 386.09mL
HOW TO CALCULATE VOLUME:
The new volume of a gas sample can be calculated using the following expression:
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressureP2 = final pressureV1 = initial volumeV2 = final volumeT1 = initial temperatureT2 = final temperatureAccording to this question, a sample of a certain gas has a volume of 452 mL at 711 mmHg and 26°C (299K).
(711 × 452)/299 = 760 × V2/273
1074.82 = 2.78V2
V2 = 1074.82 ÷ 2.78
V2 = 386.09mL
Therefore, the volume of this same sample of gas if it were measured at STP is 386.09mL.
Learn more about volume at: https://brainly.com/question/754925?referrer=searchResults
How might a firefighter use chemistry?
A. Chemistry can help a firefighter plan an escape route through a
burning building
B. Chemistry can help a firefighter understand combustion and how
to put out fires.
C. Chemistry can help a firefighter understand how much of a load
the floors of a burning building can hold,
D. Chemistry can help a firefighter plan an exercise routine to prepare
for fires
Answer:
me has answer
Explanation:
b
Why does a solid fill only part of a closed jar while the same mass of a gas fills the whole jar?
Answer:
because of atom don't put that as an answer
Explanation:
i need point to do finals
The different behavior of particles in solids and gases, including the intermolecular forces and kinetic energy, leads to solids filling only part of a closed jar while the same mass of a gas fills the whole jar. A solid fills only part of a closed jar, while the same mass of a gas fills the whole jar due to the differences in the behavior of particles in each state of matter.
1. Solid: In a solid, the particles are tightly packed and held in a fixed position. They have a definite shape and volume. The intermolecular forces between the particles are strong, preventing them from moving freely. As a result, solids occupy a specific amount of space within a container.
2. Gas: In a gas, the particles are spread out and move freely. They have no definite shape or volume. The intermolecular forces between the particles are weak, allowing them to move and fill the available space. As a result, gases can expand to fill the entire volume of a container.
When the same mass of a gas and a solid are placed in a closed jar, the gas particles have higher kinetic energy and are more mobile. They collide with each other and the walls of the container, exerting pressure and spreading out to occupy the entire space. Since the intermolecular forces are weak, the gas particles are not constrained by a fixed arrangement.
Learn more about Intermolecular Forces here:
https://brainly.com/question/12243368
#SPJ3
7. You should see a diagonal band from top left to bottom right across your graph. These are called "main sequence stars". Describe the general trend or relationship they show between temperature and brightness.
Answer: mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
Explanation:
Look at the graph. Which part of the line shows a time
when the object was not moving?
what can cats get from eating mice and moles?
Answer:
its called Toxoplasmosis.
Explanation:
Cats become infected by Toxoplasma gondii by ingesting the cysts of this parasite. Most often, this occurs when cats eat mice or rats infected with the parasite. However, they can also ingest it during grooming after coming in contact with infected soil or feces.
hope it helped ;)
The process in which the nucleus of an atom splits into two lighter atoms, releasing a large amount of energy, is nuclear ______ Fusion Fission Radiation Energy.
Answer:
B. Fission
Explanation:
On edge
The work you do on a machine is called the_________________
Answer:
THE WORK YOU DO ON A MACHINE IS CALLED WORK INPUT
Why were your results for the Southern Hemisphere opposite of what you found for
the Northern Hemisphere?
When the equation for the reaction represented below is balanced and all coefficients are reduced to lowest whole-number terms, the coefficient for Al(s) is __ Al(s) + __ O2(g) __ Al2O3(s)
This question is asking for the correct balanced reaction, when solid aluminum reacts with gaseous oxygen to form solid aluminum oxide, according to the law of conservation of mass, which demands us to have the same number of atoms of each element on both sides of the equation.
In such a way, we can start by knowing there is one aluminum atom on the left and two on the right whereas there are two oxygen atoms on the left and three on the right side of the equation.
The aforementioned means we must balance oxygen first by putting a 2 on aluminum oxide and a 3 on oxygen in order to cross multiply and obtain six oxygen atoms on both sides of the equation.
Moreover, the 2 on the aluminum oxide makes four aluminum atoms on the right, which means we must put a 4 on the left-handed aluminum in order to get the correct balance, and therefore, write the following balanced equation:
4Al(s) + 3O₂(g) ⇒ 2Al₂O₃(s)
Hence, the coefficient for Al, as asked, is 4.
Learn more:
https://brainly.com/question/11322377 https://brainly.com/question/7181548Give braniliness
AH = ?
Select one:
O a. Hproducts/Hreactants
O b. products-Hreactants
O c. Hreactants+H products
O d. Hreactants-Hproducts
Answer:
I think its C
Explanation:
Chandra wants to know how many moles are contained in 150. 0 g CCl4 (carbon tetrachloride). What quantity of CCl4 should she use to make this conversion? number of moles molecular mass molar mass mole ratio.
Answer:
Molar mass
Explanation:
The molar mass is the number of grams by which there's exactly one mole of one specific substance. So what you do is divide the grams by the molar mass to obtain the number of moles :).
Answer:
Yep Moler mass is the answer
Explanation:
The Haber process can be used to produce ammonia (NH3) from hydrogen gas (H2) and nitrogen gas (N2). The balanced equation for this process is shown below. 3H2 N2 Right arrow. 2NH3 The molar mass of NH3 is 17. 03 g/mol. The molar mass of H2 is 2. 0158 g/mol. In a particular reaction, 0. 575 g of NH3 forms. What is the mass, in grams, of H2 that must have reacted, to the correct number of significant figures? 0. 1 0. 102 0. 10209 0. 1021.
Answer:
B
Explanation:
We are given that ammonia can be produced from hydrogen gas and nitrogen gas according to the equation:
[tex]\displaystyle 3\text{H$_2$} + \text{N$_2$} \longrightarrow 2\text{NH$_3$}[/tex]
We want to determine the mass of hydrogen gas that must have reacted if 0.575 g of NH₃ was produced.
To do so, we can convert from grams of NH₃ to moles of NH₃, moles of NH₃ to moles of H₂, and moles of H₂ to grams of H₂.
We are given that the molar masses of NH₃ and H₂ are 17.03 g/mol and 2.0158 g/mol, respectively.
From the equation, we can see that two moles of NH₃ is produced from every three moles of H₂.
With the initial value, perform dimensional analysis:
[tex]\displaystyle \begin{aligned} 0.575\text{ g NH$_3$}& \cdot \frac{1\text{ mol NH$_3$}}{17.03\text{ g NH$_3$}} \cdot\frac{3\text{ mol H$_2$}}{2\text{ mol NH$_3$}} \cdot \frac{2.0158\text{ g H$_2$}}{1\text{ mol H$_2$}} \\ \\ & = 0.102\text{ g H$_2$}\end{aligned}[/tex]
*Assuming 100% efficiency.
Our final answer should have three significant figures. (The first term has three, the second term has four (the one is exact), the third term is exact, and the fourth term has five. Hence, the product should have only three.)
In conclusion, our answer is B.
Choose one metal from the reactivity series that will react safely with dilute sulphuric acid
Please can someone answer quickly
Answer:
Zinc (Zn) will safely react with dilute sulphuric acid.
Explanation:
If correct please give brainliest
Stay safe and healthy
Thank You
Copper can be also be made by reacting copper oxide with methane
as shown below.
4CuO + CH4 + 4Cu + 2H2O + CO2
How many moles of copper would be made if:
a) 2 moles of copper oxide were reacted with 2 moles of methane?
b) 2 moles of copper oxide were reacted with 1 mole of methane?
c) 10 moles of copper oxide were reacted with 2 moles of methane?
Answer:
a
Explanation:
PLEASE HELP ME ON THIS
Answer:
The conductance will increase as the concentration of the electrolyte is increased.
Explanation:
The ions are what carry the charges from one electrode to another. The more there are, the easier it is for electrons to get across the solution of electrolyte,