Answer:
increase
Explanation:
Let's suppose we have a sample of air in a closed container. We heat the container and we want to predict what would happen to the pressure.
According to Gay-Lussac's law, the pressure of a gas is directly proportional to its absolute temperature.
Thus, if we increased the temperature of the air by heating it, its pressure would increase.
If a sample of air in a closed container was heated, the total pressure of the air would increase.
Carbon-14 emits beta radiation and decays with a half life of 5730 years. Assume you start with 2.5x10^15 grams of Carbon-14, how many grams remain at
the end of 5 half lives?
A. 1.1x10^-10 g
B. 2.5x10^-10 g
C 1.3x10^-10 g
D. 5.0x10^-10 g
The amount remaining at the end of 5 half-lives is 7.81×10¹³ g
From the question given above, the following data were obtained:
Half-life (t½) = 5730 yearsOriginal amount (N₀) = 2.5×10¹⁵ gNumber of half-lives (n) = 5Amount remaining (N) =?The amount remaining can be obtained as follow:
N = 1/2ⁿ × N₀
N = 1/2⁵ × 2.5×10¹⁵
N = 1/32 × 2.5×10¹⁵
N = 0.03125 × 2.5×10¹⁵
N = 7.81×10¹³ g
Therefore, the amount remaining after 5 half-lives is 7.81×10¹³ g
Learn more about half-life: https://brainly.com/question/25783920
name any two chemical required for preparation of ammonia gas
Answer:
Ammonium chloride and slacked lime
Explanation:
We can generate ammonia gas in the research centre by slowly heating ammonium chloride (NH4Cl) and slaked lime [Ca(OH)2]. Ammonia gas is lighter than air, requiring its accumulation by the descending displacement of air.
HELP ME PLZZZ
SMNSNSNS
D
D
D
D
D
D
D
D
D
D
Answer:
#1 is C, #2 is D, #3 is A
Explanation:
what do solid and gas-particle have in common? (not liquid )
Answer:
Solid, liquid, and gas are common states of matter. Because each particle is attached to several others, individual particles cannot move from one location to another, and the solid is rigid. A has a fixed volume but does not have a fixed shape. Liquids take on the shape of the container they are in.
Explanation:
sorry, this is what i think
what soda was the first to use the two-liter bottle?
Answer:
Coca-Cola or Pepsi
Explanation:
Im sure one of those
I need help!!!!!!!!!!!!!!!
Answer:
I think the answer is A.
Explanation:
hope this helps.
a scientist finds an organism that has a single cell without a nucleus.This organism was found in pond water.In which KINGDOM douse it belong?if you can explain
Archaea (Archaeon ): Single-celled microorganisms without nuclei and with membranes different from all other organisms. Once thought to be bacteria.
Unicellular organism
-A unicellular organism, also known as a single-celled organism, is an organism that consists of a single cell, unlike a multicellular organism that consists of multiple cells. Unicellular organisms fall into two general categories: prokaryotic organisms and eukaryotic organisms.
Can someone help?
Name the compound:
CH=benzene
Why?
benzene is represented by the empirical formula CH, which indicates that a typical sample of the compound contains one atom of carbon (C) to one atom of hydrogen (H).
----(Is this what you meant???)
Which shows the weight of an atom?
atomic mass
atomic number
chemical symbol
none of the above
Answer:
The atomic mass
Explanation:
Answer: atomic mass
question: the diagram below shows the major parts of the digestive system.
what part of the digestive system is labeled by the number 1?
A.
small intestine
B.
esophagus
C.
stomach
D.
mouth
Answer:
I got it Right in Study Island
Explanation:
how to tell if something is a strong or weak acid or base
Answer:
It basically depends upon the pH value of that acid or Base. That's how you can determine whether the substance is a strong or weak acid/base. We have a pH scale ranging from 1 to 14, where 7 is the neutral point. Any substance having a pH of 7 means it is neither an acid nor a Base, but neutral in nature, such as water([tex]H_{2}O[/tex]). Now, if the pH is less than 7, the substance is an acid, similarly if the pH is more than 7, it is a base. As the pH DECREASES, the substance becomes more acidic, on the other hand as the pH INCREASES, the substance becomes more basic. This way you can compare between pH values of two substances and tell which one is stronger or weaker.
For Acids:
If a substance's pH is between 1 and 7 it is an acid. If it is more towards 1, it's a strong acid and if it's more towards 7 it is a weak acid.
For Bases:
If a substance's pH is between 7 and 14 it is a base. If it is more towards 14, it's a strong base and if it's more towards 7 it is a weak base.
Hope that helps...
13. A natural flow of groundwater that has
reached the surface is a(n)
a. spring.
c. aquifer.
b. well.
d. travertine.
A natural flow of ground water that has reached surface level is call a spring.
Water moves underground downward and sideways, in great quantities, due to gravity and pressure.
A spring is the result of an aquifer being filled to the point that the water overflows onto the land surface. They come in different sizes, from intermittent seeps, which flow only after much rain, to huge pools flowing hundreds of millions of gallons daily.
Learn more:
https://brainly.com/question/2375655
what is the equilibrium concentration of co at 1000 k?
Answer: For the reaction, K c = 255 at 1000 K. If a reaction mixture initially contains a CO concentration of 0.1550 M and a Cl 2 concentration of 0.171 M at 1000 K. 1.
Explanation:
the mass number of an element whose atoms contain 18 protons, 22 neutrons and 18 electrons
Answer:
Argon has the chemical formula Ar. Argon has 18 protons and 22 neutrons in its nucleus giving it an Atomic Number of 18 and an atomic mass of 40. Argon is a Noble Gas. Argon is a gas at room temperature.
Explanation:
Which of these is found in the energy levels of an atom?
Answer:
Electrons
Explanation:
Because the nucleas is In the middle and the Electrons surround it
Which of the liquids will sink in milk?
Answer:
mercury 13.6 has a great density than milk
Find the percent composition of OXYGEN in Manganese (III) nitrate, Mn(NO3)3.
Answer:
59.8%
Explanation:
First find the Mr of manganese (III) nitrate.
Mr of Mn(NO₃)₃ = 54.9 + (14 × 3) + (16 × 3 × 3) = 240.9
Since we have to find the percentage composition of oxygen, we need to find the Mr of oxygen in the compound, which is:
Mr of (O₃)₃ = (16 × 3) × 3 = 144
Now we can find percentage composition / percentage by mass of oxygen.
% composition = [tex]\frac{Mr\ of\ oxygen\ in\ compound}{Mr\ of\ compound}[/tex] × 100
% composition = [tex]\frac{144}{240.9}[/tex] × 100 = 59.776%
∴ % compostion of oxygen in maganese(III)nitrate is 59.8% (to 3 significant figures).
Why do some atoms form chemical bonds while others do not?
Answer:
Atoms of these elements have full outer electron shells. These atoms are stable and very rarely form bonds with other atoms. If the electronegativity values between two atoms are comparable, they may still form chemical bonds to increase the stability of their valence electron shell
Explanation:
Which substances will make a salt when combined?
Vinegar and tea
Soda and wine
Soda and ammonia
Fertilizer and detergent
Answer:
Soda and wine is the answer to your question.
Explanation:
yo make salt you need a base and an acid. in this case the base is soda and the wine is acid. hope that helps :)
how does one determine a molecular formula from the epirical formula
Answer:
C
Explanation:
what happens when carbon dioxide gas is cooled to -78 degree Celsius
Answer:
It will be solid
Explanation:
-78 C° is the freezing point of carbon dioxide, so at the temperature of -78 Celsius, the particles of carbon dioxide will come closer together and have about a fixed position to vibrate. The carbon dioxide will turn into solid. The solid form of carbon dioxide is also called dry ice.
What is the atomic mass of an element that has 37 protons, 43 neutrons, and 36 electrons?
Answer:
the atomic mass of the element with 37 protons,43 neutrons and 36 electrons is 80
Which example accurately describes a solution?
Typical examples of solutions are
Alcoholic beverage (ethanol in water)GasolineWhat is a solution?A solution can be defined as a mixture (homogeneous) of two or more substances typically a solute in a solvent, the solvent is usually in greater quantity and the substance or substances present in lesser amounts are the solutes.
Other good examples of a solutionCommon examples of solutions are sugar in water and salt in water solutions, soda water,
Furthermore, solutions can be homogenous or heterogenous
Learn more about solutions here:
https://brainly.com/question/2626617
How does an introduced species affect an ecosystem? Give 2 examples of positive ways
and 2 examples of negative ways.
Answer:
1+ it can help create balance among the ecosystem, particularly by controlling invasive species
2+ can help restore native ecosystems on degraded land
1- can become an invasive species
2- can cause an imbalance among native species
Explanation:
100 POINTS PLEASE HELP
1. What is the molar mass of NaOH?
2.How many atoms are in 3.35 moles of Aluminum?
3.How many moles of CO2 gas are in a 101.25 L container filled with CO2 gas?
4.What is the mass of 13.7 moles of N2 gas?
5.How many moles are in 78.5 molecules of CaCO3?
Answer:
1) Molar mass of NaOH can be calculated by taking the atomic mass values in the periodic table. Na (Sodium) = 22.98g/mol, O (Oxygen) = 16g/mol, H (Hydrogen) = 1.01g/mol
Add all the the mass values together for NaOH's molar mass, so (22.98 + 16 + 1.01) = 39.99 or round it to 40g/mol
2) To find the atoms from the moles, you just multiply Avogadro's number (6.02 x 10^23) by the moles.
So 3.35 x (6.02 x 10^23) = 2.0167 x 10^24 atoms are in 3.35 moles of aluminum
3) If the question is asking under standard temperature and pressure, we know that if we divide the volume by the molar volume of a gas (which is 22.7 in standard temperature and pressure), we can get the moles.
So 101.25L / 22.7 = 4.46 mol
4) We know that to find the moles, it is the mass divided by the molar mass. If we rearrange the equation to solve for mass, we have to multiply the moles by the molar mass to get there.
Nitrogen's (N) molar mass on the periodic table is 14g/mol, but since Nitrogen is a diatomic element, it would be N2 by itself. So multiply 14 by 2, which will give you 28g/mol. N2's molar mass is 28g/mol.
Now you multiply 13.7 moles by 28g/mol, which will give you 383.6g
5) Now here I think you may have wrote the question wrong. Molecules would be at a way higher number than just 78.5, so I'm first just going to assume you meant 78.5g.
To get the moles from mass, you divide the mass of the compound by its molar mass. Molar mass of CaCO3 can be just calculated using the atomic mass values for each element in the compound (Ca is 40.07g/mol, C is 14g/mol, O3 would be 16 x 3 g/mol or just 48g/mol) and then adding them all together (40.07 + 14 + 48 = 102.07) which would give us 102.7g/mol.
Now, just divide the mass 78.5g by the molar mass 102.7g/mol
78.5/102.7 = 0.764 moles
Now on the offchance that you were actually referring to molecules, and you accidentally typed a different number doing this, you can find out the moles from the molecules by just dividing the number of molecules you have with avogadro's number (6.02 x 10^23)
So it would look something like this:
molecules of CaCO3 / 6.02 x 10^23
how much evaporated milk equals 1 cup of whole milk?
Answer:
1/2 cup evaporated milk plus 1/2 cup water.
Explanation:
Which objects refract light? (Select all that apply.)
the human eye
contact lenses
a magnifying glass
concave mirrors
Which model of the atom is thought to be true?
A. Protons, electrons, and neutrons are evenly distributed throughout the volume of the atom.
B. The nucleus is made of protons, electrons, and neutrons.
C. Electrons are distributed around the nucleus and occupy almost all the volume of the atom.
D. The nucleus is made of electrons and protons.
Its A. Explanation:I just know
Helpppppppp plzzzzzz asaaaapppp
Answer:
Alright, the first thing we have to do is to balance the chemical equation
2Na3N -----> 6Na + 1N2
We have 60g of Na3N, we convert them into moles by dividing the mass of the compound by the molar mass.
Molar mass of Na3N = (22.98 x 3) + (14) = 82.94g/mol
60 = 0.72341451651 moles of Na3N
82.94
Now because we did the balanced equation, we know the mole to mole ratio of Na3N to N2 would be 2:1, so in order to get the moles of N2 you have to divide the moles of Na3N by 2
0.72341451651 moles/2 = 0.361707258 moles of N2
Now that we have the moles of N2, we just have to determine the mass of it in grams. In order to do that, just multiply the moles by the molar mass of N2 (28g/mol)
0.361707258 x 28 = 10.13g of N2
Therefore the decomposition of 60g of Na3N would result in 10.13g of N2 (nitrogen gas)
What are the molecular formulae of the following compounds ?
Hydrochloric acid, sulphuric acid, sodium chloride, glucose, methane.
Let's see
[tex]\\ \sf\longmapsto Hydrochloric\:acid=HCL[/tex]
[tex]\\ \sf\longmapsto Sulphuric\:acid=H_2SO_4[/tex]
[tex]\\ \sf\longmapsto Sodium\: Chloride=NaCl[/tex]
[tex]\\ \sf\longmapsto Glucose=C_6H_12O_6[/tex]
[tex]\\ \sf\longmapsto Methane=CH_4[/tex]
.
Answer:
the molecular formulae of the following compounds are:
Hydrochloric acid: HCl
Sulphuric acid:[tex]H_2SO_4[/tex]
sodium chloride: NaCl
glucose:[tex]C_6H_{12}O_6[/tex]
methane:[tex]CH_4[/tex]
Explanation: