The time taken by the object to hit the ground is 1.8 seconds.
What do you mean by gravitational force?The attraction that draws two objects together is known as gravitational force, sometimes referred to as gravity. Every mass-containing object pulls on nearby things gravitationally in a sizable way.
The time it takes for an object to hit the ground after being dropped off a cliff can be calculated using the formula:
t = √(2*d/g)
where t is the time, d is the distance fallen, and g is the acceleration due to gravity.
In this case, we don't know the distance fell, but we can use the horizontal velocity and time of travel to find it:
d = v * t
where v is the velocity (6 m/s), and t is time (3 seconds)
d = 6 * 3 = 18 m
Now we can use the distance fallen to calculate the time it takes to hit the ground:
t = √(2*d/g)
g is approximately 9.8 m/s^2
t = √(2*18/9.8) = √ (3.6) = 1.8 seconds
So, it takes 1.8 seconds for the object to hit the ground after traveling horizontally off a cliff at 6 m/s for 3 seconds.
To know more about gravitational force, visit:
brainly.com/question/12528243
#SPJ1
anthony walks to the pizza place for lunch. he walks 1 km east then 2 km south and then 1 km east again. what distance did he cover and what was his displacement
Answer:
3 km displacement
Explanation:
I'm pretty sure that's the answer, I'm so sorry if it's not
1. Ivan pulls a sled loaded with logs to his cabin in the woods. He pullsutbiq si
with a force of 800 N at an angle of 20° above the ground.
a. Draw a free-body diagram of the 4 major forces acting on the
sled. Label each force appropriately.
The four major forces acting on the sled and the free-body diagram of the 4 major forces acting on the sled is attached below:
The force of gravity pulling down on the sled and logs (labeled as "Fgrav").The force of friction acting against the sled's movement (labeled as "Ffrict").The force of Ivan pulling the sled (labeled as "Fpull").The force of normal acting on the sled (labeled as "Fnorm").What is a free body diagram?In physics and engineering, a free body diagram (FBD; also called a force diagram) is a graphical representation used to visualize the forces, moments, and resulting reactions applied to a body in a given state. expression. It represents a body or connected bodies that includes all applied forces, moments, and reactions acting on the body. A body can consist of several internal elements (such as a truss), or it can be a compact body (such as a beam). A series of free-body and other diagrams may be required to solve complex problems. A free body diagram consists of:
A simplified version of the body (often a period or box).Forces are represented as straight arrows pointing in the direction they act on an object.A moment is represented as a curve with a single arrow or as a vector with two arrows pointing in the direction acting on the body.One or more reference coordinate systems.Responses to applied forces are usually indicated by dashes through the stem of the vector.To know more about free body diagram, visit:
https://brainly.com/question/24087893
#SPJ1
Why is countercurrent flow better for dialysis?
The countercurrent flow is better for dialysis because-
The dialysate flows in the opposite direction from the blood. More urea and creatinine are removed from the blood as a result of the dialysate and blood flowing counter-currently, which optimizes the concentration gradient of solutes between the two fluids.
All throughout the dialyzer's length, countercurrent flow optimizes the concentration gradient between blood and dialysate Small solute clearance falls by 10% when blood flow and dialysate flow are cocurrent (moving in the same direction). Because they produce a more consistent temperature difference between the fluids along the whole length of the fluid channel, counter flow heat exchangers naturally outperform parallel flow heat exchangers in terms of efficiency.As an illustration, a faster blood flow rate boosts clearance by increasing the volume of blood evacuated each minute7. Additionally, a quicker dialysate flow rate results in more solutes being removed from the dialysate fluid, increasing the concentration gradient and the clearance rate8–10.To know more about dialysis here
https://brainly.com/question/28063794
#SPJ4
Could Aliens 65 Million Light Years Away from Earth See Dinosaurs Alive? If aliens can see the dinosaurs, what problems might there be? If aliens couldn’t see the dinosaurs, why not?
Answer:Now this question can go ways
Explanation:
1: YES= Because they have super advanced technology and the aliens could fly to earth steal our resources and then experiment on the dinosaurs.
2:NO they did not have enough tech yet to support that much length and they just never look or find earth
ME PERSONALLY I WOULD CHOOSE 1 but, up to you
A dedicated PV system circuit breaker, suitable for backfeed and positioned at the opposite end of the bus from the ______, is a requirement of NEC 705.12(B).
A dedicated PV system circuit breaker, suitable for backfeed and positioned at the opposite end of the bus from the main circuit breaker, is a requirement of NEC 705.12(B).
What is a circuit's straightforward definition?A completed circular conduit through which electricity flows is known as a circuit in electronics. A simple circuit includes a current provider, conductors, and a load. The term "circuit" can broadly be used to describe any ongoing path via which electricity, information, or a signal might go.
Why are circuits essential?A channel for the transfer of electric current is known as an electric circuit. Electric energy is transferred to components that transform it into various types of energy that can perform work, such as supplying power to light, appliances, and other devices, when electrical current flows across a circuit.
To know more about Circuit visit :
brainly.com/question/27206933
#SPJ4
An element has 1st, 2nd and 3rd ionization energies given in kJ mol-1. This element is a member of which group
An element has 1st, 2nd, and 3rd ionization energies given in kJ mol-1. The element in question is likely a member of the group known as the transition metals. This is because the elements in this group generally have higher ionization energies than other elements
For example, the first ionization energy of a transition metal is typically between 400 and 600 kJ/mol, the second ionization energy is typically between 1200 and 1600 kJ/mol, and the third ionization energy is typically between 2500 and 2800 kJ/mol. This range of ionization energies is consistent with the values given in the question. Transition metals are located in the middle of the periodic table, in between the s-block and the p-block elements.
They generally have higher melting points, densities, and boiling points than s-block elements and they display various oxidation states. All transition metals are metals, and they are usually the elements responsible for the color of compounds. Transition metals are also known for their catalytic properties, and they are often used as catalysts in various industrial and chemical processes. Furthermore, many transition metals are essential for life, including iron, cobalt, and copper. In conclusion, the element in question is likely a member of the transition metals group in the periodic table.
To know more about ionization energies refer to the link brainly.com/question/28385102
#SPJ4
An element has 1st, 2nd and 3rd ionization energies given in kJ mol-1. This element is a member of which group in the periodic table?
Energy can't be made or destroyed. It is only ever transferred, stored or dissipated. This means that energy is... what?
How were you able to increase the amount of potential the ball had?
Answer:
The potential energy can be increased by increasing the mass of the object, by varying the distance between the two objects, decreasing the kinetic energy of the molecules, by freezing, by compressing or stretching, and so on.
Explanation:
Hope this helped !
Because of the Doppler effect, a light- or sound-emitting object moving toward you has a ________ compared to a stationary object.
Because of the Doppler effect, a light- or sound-emitting object moving toward you has a lower amplitude compared to a stationary object.
The Doppler effect is generally defined as the shift in wave frequency (whether it be sound or light) caused by relative motion between the wave source and the observer. Every time a source wave moves in reference to the observer, this effect can be seen.
The Doppler effect allows astronomers to determine the frequency of light waves as an object moves in relation to the observer. As it approaches you, the frequency decreases and the item exhibits a blueshift. A redshift indicates that an item is travelling away from us.
To know more about Doppler effect
https://brainly.com/question/13229185
#SPJ4
The distance from the acoustic center of the source to the point at which the intensity of the direct sound equals that of the reverberant field describes
Critical distance is defined as the distance between the acoustic center of the source and the point at which the intensity of the direct sound equals that of the reverberant field.
The distance from a sound source when the direct energy (energy radiated straight from the source) equals the reverberant energy (radiated from walls, floor, and ceiling) is called critical distance. It can be said as the critical distance is the distance between the microphone and the sound source at which the level of room reverberation is equal to the level of the direct sound. Critical distance is considered an important factor in positioning loudspeakers and microphones.
You can learn more about distance at
https://brainly.com/question/9364505
#SPJ4
For the circuit in the attached plot, find the energy stored in the capacitor under DC conditions. O 30 mJ O 3 mJ O 0.045 mJ O 0.005 mJ
The energy stored in the capacitor is 0.045 mJ. Under DC conditions, the capacitors will be open-circuited.
What is the formula for energy stored in a capacitor?Energy stored in a capacitor can be calculated by
E = ½ CV²
Where
E = energy (J)C = capacitance (F)V = voltage (V)The picture of circuit in the attached plot is in the attachment.
Find the energy stored in the capacitor under DC conditions!
We have
R₁ = 10 ΩR₂ = 20 ΩC = 0.1 μFI = 3 AUnder DC (Direct Current) conditions, the capacitors will be open-circuited. It means that there is no current will flow through the 20 Ω resistor. So, I across the 10 Ω resistor is the same as I source.
See the picture below in the attachment!
The voltage across the 10 Ω resistor is
V = IR
V = 3(10)
V = 30 V
The voltage across the capacitor is the same as the voltage across the 10 Ω resistor.
Vc = V = 30 V
The energy stored would be
E = ½ C Vc²
E = ½ (0.1)(10⁻⁶)(30)²
E = ½ (10⁻⁷)(900)
E = 450 × 10⁻⁷
E = 0.045 × 10⁻³
E = 0.045 mJ
Hence, the energy stored in the capacitor under DC conditions is 0.045 mJ. The correct option is (c).
Learn more about energy stored in the circuit here:
brainly.com/question/14103175
#SPJ4
20 points!
A student wants to measure the mass of three different rocks.
Which SI unit should the student use?
millimeters
grams
ampere
kelvin
Answer:
I've never heard of ampere, so it's either grams or ampere.
A child whirls a ball at the end of a rope, in a uniform circular motion. Which of the following 19. statements is NOT true? (A) The radius of the circle remains constant the entire time the ball is moving in a circular path. (B) The direction of the tension exerted by the string on the ball is directed towards the center of the Cular path. The magnitude of the ball's acceleration is directly proportional to the length of the string. The velocity of the ball is constant the entire time the ball is moving in a circular path.
The velocity of the ball is constant the entire time the ball is moving in a circular path at the end of a rope, in a uniform circular motion.
Hence, Option D is correct.
A particular kind of motion in which an object moves in a circle at a fixed speed is known as uniform circular motion. Any point on a propeller, for instance, that is rotating at a consistent speed is doing uniform circular motion. Other examples include the watch's second, minute, and hour hands.Because velocity depends on the direction of travel, and in circular motion the object's direction changes at each point, for a body moving in uniform circular motion, the speed the object reaches will remain constant, not the velocity. Acceleration will remain constant as long as speed doesn't change.To know more about Circular motion here
https://brainly.com/question/28503060
#SPJ4
The Earth has a mass of 6 x 10^24 kg and orbits the Sun in 3.15 x 10^7 seconds at a constant radius of 1.5 x 10^11m. Find the following.
(a) What is the Earth's centripetal acceleration around the Sun?
(b) What is the gravitational force acting between the Sun and Earth?
(c) What is the mass of the Sun?
The Sun's mass is 1.778 x 10 m/s2. v=2rT, where T is the amount of time it takes for the Earth to turn around the Sun.
What is our sun's mass?Mass and volume: 1.989 x 1030 kilograms The sun has a mass of 1.989 x 1030 kilograms, which is about 333,000 times the mass of the Earth. Leading astronomers Jack J. and Imke de Pater found that the sun contains 99.8 percent of the mass of the entire solar system.
Earth's mass, Me, is 6 x 10 kg.
Earth's R Radius and Time of Rotation are 1.5x10m. 3.15 x 107 Sec.
Ac = earth's centripetal acceleration We know that W = 345X107 1.99 X 10 Rad/s Gravitational Force F 6x1024 x 1.99x107x mass of the Sun Me 2
F equals 35 + 82 x 10° N Ani.
F = 6 R2 28 2522 x 10" 6.67 x 10" x 6 x 1024 x Ms (1.5 X 10") 2 Ms 35.82 x 1028 x 1.5X1-5 x 1822 6.67 X 10" x 6 x 10' 24 Ms 50 80.59 x 10° 40.02 X 10/3 37 Ms = 2.01 x 10 kg is known to exist.
The fact that centripetal acceleration F-ma f 22 equates both equations is known by mass of now. ma Scanner a equals 52.
ат 24 6.67 x 10" x 6X 10° 1-5 x 10" 17:78 x 16-9 = 1.778 x 10 m/s2 Ans
To learn more about Sun's mass here:
https://brainly.com/question/1626565
#SPJ1
The energy transferred to the water was 1050 J.
The time taken for the water temperature to increase by 0.6 °C was 5 minutes.
The specific heat capacity of water is 4200 J / kg °C.
Write down the equation which links energy transferred, power and time.
The energy transferred to the system is equal to the work done. For the endothermic process work done is negative. The power of the system is the product of work and time. Hence, the power is 315000 watt.
What is endothermicity?Endothermic reactions are those which absorbs energy into the system. Thus the surrounding temperature gets decreased.
The calorimetric equation connecting the heat transferred q, with the specific heat, mass and temperature difference is written as:
q = m c ΔT
Here, the heat energy transferred is equal to the work done on the system. Hence W = - 1050 J
Power of the system is the product of work done and time taken for the energy transfer.
Power = W.dt
w = - 1050 J
t = 5 min = 300 s
Then P = 1050 J × 300 = 315000 watt.
Find more on work done :
https://brainly.com/question/13662169
#SPJ1
Jessica is riding on a Merry-go-round on an outer horse that sits a distance of 8.0m from the center of the ride. Jessica’s sister, Julie, is on an inner horse located 6.0m from the ride’s center. The Merry-go-round turns once every 40 s. Explain which girl is moving with the greater linear speed.
Jessica's linear speed is faster.
We must first define linear speed in order to respond to the query.
How fast is linear motion?This is the tangential speed of an item moving in a circle. Given by the formula v = r,
r is the object's distance from the circle's center, and is its angular speed.
Given that Julie, Jessica's sister, is riding an inner horse that is placed 6.0 meters from the center of the merry-go-round and Jessica is riding an outside horse that is 8.0 meters away from the center of the ride. The merry-go-round is also rotating at a consistent speed.
Given that v = r and = constant for linear motion,
So, v ∝ r.
Therefore, the girl who was farther away from the merry-go-center round's would move at a faster linear rate.
Since
Julie is at r, and Jessica is at r' = 8.0 m "= 6.0 m.
Since
r' = 8.0 m > r and v r "= 6.0 m,
Jessica's thus has a faster linear speed.
To learn more about Linear Speed from given link
https://brainly.com/question/27391749
#SPJ1
An ambulance racing down the highway has 14,600,000 J of energy. It is moving 34 m/s. What is the mass of the ambulance? (Round
your answer to two decimal places) KE=1/2mva^2
The ambulance weighs 16.97 tons, and the kinetic energy of an object is given by the formula KE = 1/2mv2, where m is the object's mass, v is its velocity, and KE is the kinetic energy.
What is kinetic energy and above explanation?Kinetic energy is the energy an object possesses due to its motion, and it is calculated as 1/2mv^2, where m is the mass of the object and v is its velocity. It represents the ability of an object to do work by virtue of its motion.Given that the ambulance has 14,600,000 J of energy and is moving at 34 m/s, we can use this formula to find the mass of the ambulance:KE = 1/2mv^214,600,000 J = 1/2m(34 m/s)^2To solve for mass, we can divide both sides of the equation by (1/2)(34 m/s)^2:m = (14,600,000 J) / [(1/2)(34 m/s)^2]m = 14,600,000 J / (1/2)(1156 m^2/s^2)m = 14,600,000 J * (2/1156 m/s^2)m = 16.97 tonSo the mass of the ambulance is approximately 16.97 ton.
To learn more about kinetic energy refer:
brainly.com/question/8101588
#SPJ4
Which statement describes the electrostatic force between two charged objects?
A It is greater when two objects are farther apart.
B It is greater if two objects have the same charge.
C It is greater when the charges of the objects are greater.
D It is zero if the charges of the objects repel one another.
The electrostatic force connecting two electrostatic force is expressed by the statement that it is stronger when the voltages of the items are greater.
Electrostatics: What is it?The study of energies between charged, as outlined by Coulomb's Law, is known as electrostatics. We introduce the idea of a magnetic charge encircling charges. The electric current near a line and a plane are examples that we go through as we create detailed definition for both "electric potential" and "voltage."
What is an example of electrostatics?Examples involving electrostatic forces are: With the aid of a comb, we can create electrostatic force when i pass a piece of paper through to the oil in my heads. When one balloon is brushed with hair, the other balloon becomes drawn to it.
To know more about Electrostatics visit:
https://brainly.com/question/14889552
#SPJ1
difference between reflection of sound, echo and reverberation
After falling for 5.5 seconds, what would be the final velocity of the object?
(Picture Provided)
Please I need help on this!
The first one is based on the fundamental definition of velocity that employs the widely used velocity equation.
What is Final velocity?
The second approach determines the amount of velocity change brought on by acceleration over a given period of time.
Finally, the average velocity formula is used in the third section of the velocity calculator, which may be helpful if you need to examine trips with varying speeds across different distances.
According to the definition of velocity, it is the rate at which an object's position changes over time. Consideration of body motion is one of the fundamental ideas in classical mechanics.
Therefore, The first one is based on the fundamental definition of velocity that employs the widely used velocity equation.
To learn more about Velocity, refer to the link:
https://brainly.com/question/18084516
#SPJ1
An electrical conductor that has very low resistance to current at low temperatures is called a(n) .
An electrical conductor that has very low resistance to current at low temperatures is called a(n) Superconductor.
Superconductors are magnetic, right?A superconductor's hatred of magnetic fields is one of its basic characteristics. A superconductor generates its own equal and opposite magnetic field when a magnetic field is applied by a scientist.
What is the name of a permanent magnet's two poles?A north-seeking pole (north pole) and a south-seeking pole (south pole) are found at either end of every magnet. Depending on how they are arranged, these two oppositely charged poles enable magnets to both repel and attract other magnets.
To know more about superconductors visit:
brainly.com/question/19618939
#SPJ4
600 Joules of work is used to lift a box from the ground to a height of six meters. How much work would have been done if a lever would have been used with an effort arm of 12 meters and a load
arm of 6 meters? († point)
O 50 J
O 100 J
O 600 J
0 72 J
The work that would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters is 50 J.
option A is the correct answer.
What is the work done by the lever?
A lever is a simple machine that makes work easier and faster. When a lever is used, a small effort will be used to overcome a large load.
The efficiency of a machine increases when the output force is greater than the input force.
Mathematically, the formula for the efficiency of a machine is given as;
Eff = ( output force / input force ) x 100 %
The output force is given by the following formula;
F ( out ) = load x distance moved by load
The input force is given by the following formula;
F ( input ) = effort x distance moved by effort
The work that would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters is calculated as;
work = ( 600 x 6 ) / ( 12 x 6 )
work = 50 J
Learn more about lever here: https://brainly.com/question/416386
#SPJ1
Answer:
600 J
Explanation:
The work is not equal to the initial work divided by the effort arm.
Due to the surface makeup and the product that spilled, what is the direction most hazardous materials will spread based on their viscosity
Due to the surface makeup and the product that spilled, Downhill/Downwind is the direction most hazardous materials will spread based on their viscosity.
The viscosity of a fluid (liquid or gas) is its resistance to a change in form or movement of neighbouring sections relative to one another. Viscosity signifies resistance to flow. The SI unit is poiseiulle (PI).
It relates to the colloquial sense of "thickness" in liquids: syrup, for example, has a higher viscosity than water. The strength of the compensatory force is related to the viscosity of the fluid in a tube with a constant rate of flow.
In general, viscosity is affected by the condition of a fluid, such as temperature, pressure, and rate of deformation. However, in certain circumstances, the reliance on some of these features is minor. The viscosity of a Newtonian fluid, for example, does not vary appreciably with the rate of deformation. Only at very low temperatures is zero viscosity (no resistance to shear stress) observed in superfluids; otherwise, the second law of thermodynamics requires all fluids to have positive viscosity.
To learn more about viscosity, here
https://brainly.com/question/13385698
#SPJ4
A cannonball is fired with a velocity of 10 m/s upward from horizontal and 30 m/s to the west. What is the angle and direction of the cannonball
The angle and the direction of the cannonball is calculated to be about 18.435° of west.
Expressed as the ratio between two sides of a right triangle or an angle measure along with a given side, trigonometry can find unknown angle measures and lengths.
Given that,
Velocity of cannonball upward = 10 m/s
Velocity of cannonball to the west = 30 m/s
One of the side lengths reflects the velocity going north (or upward from the horizontal) at 10 m/s. Another side length depicts the speed moving west.
Angle can be calculated by applying trigonometric relation.
tan θ = northward velocity of the cannonball/westward velocity of the cannonball = 10/30
tan⁻¹(tan θ) = tan⁻¹(10/30)
θ = 18.4349°
As, the cannonball was measured from the horizontal, the angle and the direction of the cannonball is about 18.435° of west.
To know more about cannonball:
https://brainly.com/question/28767194
#SPJ4
A new planet is discovered with a radius that is 1/2 the radius of earth and 1/2 the mass of the earth. What is the acceleration due to gravity on this planet?
The acceleration due to gravity on this planet is 19.6 m/s².
What is acceleration?Acceleration is the rate at which the speed and direction of a moving object vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting. Both effects contribute to the acceleration of all other motions.
What is gravity?
In mechanics, gravity also known as gravitation is the constant force of attraction that pulls all things together. It has little impact on determining the intrinsic characteristics of common stuff because it is by far the weakest known force in nature.
Calculation:
The acceleration due to gravity on the earth's surface is given by
g = [tex]\frac{GM}{R^{2} }[/tex]
Now, Mp = [tex]\frac{M}{2}[/tex], Rp = [tex]\frac{R}{2}[/tex]
The acceleration due to gravity on the new planet is:
[tex]g_{p}[/tex] = [tex]\frac{GM_{p} }{R_{p} ^{2} }[/tex] = [tex]\frac{GM/2}{R^{2} /4^{} }[/tex] = 2g
[tex]g_{p}[/tex] = 2 × 9.8 = 19.6 m/s².
To know more about acceleration, check out:
https://brainly.com/question/460763
#SPJ1
The film strip that emerges from the camera is usually a ______________. That is, its color and light values are the opposite of those in the original scene.
The film strip that emerges from the camera is usually a Negative. That is, its color and light values are the opposite of those in the original scene.
What controls how much light enters the camera?One of the three camera settings that affects exposure is the aperture. The shutter speed, aperture, and ISO settings are together referred as as the "exposure triangle." By adjusting the relative amount of light entering a camera lens, an aperture can change the exposure.
What part of the camera and eye controls how much light enters?A camera's shutter can close or open depending on how much light is required to expose the film at the rear of the device.
To know more about camera visit:-
https://brainly.com/question/10944268
#SPJ4
A force of 255 N is applied to an object that accelerates at a rate of 7 m/s2. What is the mass of the object?
The mass of the object is 36.43 kg.
We can use the equation for force (F) to determine the mass (m) of the object:
F = m × a
Where F is the force applied to the object, m is the mass of the object, and a is the acceleration of the object.
So, in this case, we know that:
F = 255 N
a = 7 m/s²
We can use this information to solve for the mass of the object:
m = F ÷ a
m = 255 N ÷ 7 m/s²
m = 36.43 kg
Therefore, the mass of the object is 36.43 kg.
It's important to notice that this equation only holds if the force applied is the net force, so if there are other forces such as friction or air resistance they should be considered in the calculation.
Learn more about mass:
https://brainly.com/question/19694949
In which of the following sport the turning effect of force used
a) swimming b) tennis c) cycling d) hockey
The turning effect of force used in cycling. Hence, option (c) is correct.
What is turning effect of force?The moment is the term for turning effect of a force. It is the result of multiplying the force by the perpendicular distance from the force's line of action to the pivot point or location where the object will turn.
If a body that is being affected by a net external force is allowed to revolve around a pivot, the body will typically turn in the force's direction.
When a cycle paddled, force is applied for revolving it. That is why, the turning effect of force used in cycling.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
How do you prevent latency problems?
Latency problems can be prevented by not downloading multiple items at a time, not running multiple applications simultaneously, scanning for viruses, and not deleting the cache.
What causes latency problems?One of the principal causes of network latency is distance, specifically the distance between client devices making requests and the servers responding to those requests. Customers demand to communicate with technology in real time without any delays, hence low latency is essential. Users may stop using a platform altogether and switch to another application permanently if there are problems with severe latency and time delays.
How is latency measured?In milliseconds, latency reveals the strength of your connection within your network. For gaming, anything with a latency of 100ms or less is fine. However, the ideal range is 20–40 ms.
To learn more about latency visit:
brainly.com/question/14894222
#SPJ4
A 1.65-kg mass stretches a vertical spring 0.215 m. If the spring is stretched an additional 0.130 m and released, how long does it take to reach the (new) equilibrium position again
The time it takes for the mass to reach the new equilibrium position is approximately 0.15 seconds.
To calculate the time it takes for the mass to reach the new equilibrium position, you will need to know the spring constant of the spring. The spring constant, denoted by the letter k, is a measure of the spring's stiffness, and it is related to the force required to stretch the spring by a certain distance. If the spring constant is not given, it can not be calculated.
Once you have the spring constant, you can use the equation:
T = 2π √(m/k) where,
T is the period of oscillation (the time it takes for the mass to complete one full cycle of motion) m is the mass of the object attached to the spring k is the spring constant.The spring constant (k) can be found by using the equation:
F = kx where,
F is the force applied to the spring x is the distance the spring is stretched from its equilibrium position, and k is the spring constant.In this case, the force is equal to the weight of the mass, which is m*g, where m is the mass and g is the acceleration due to gravity.
mg = kx
or, k = (m*g)/x
or, k = (1.65 kg * 9.8 m/s^2) / 0.215 m = 74.65 kg/s^2
Now that we know the spring constant, we can use the equation:
T = 2π √(m/k)
To find the time it takes for the mass to reach the new equilibrium position, where T is the period of oscillation, m is the mass of the object attached to the spring, and k is the spring constant.
T = 2π √(1.65 kg / 74.65 kg/s^2) = 0.15 sec
So the time it takes for the mass to reach the new equilibrium position is approximately 0.15 seconds.
Learn more about Hook's law here:
https://brainly.com/question/2648431
#SPJ4