Answer:
Percent dissociated = 3.92%
Explanation:
The equilibrium of the weak acid, HA, is:
HA ⇄ H⁺ + A⁻
Where Ka = 8x10⁻⁴ is: [H⁺] [A⁻] / [HA]
As both H⁺ and A⁻ comes from the same equilibrium we can write the concentrations of the species as follows:
[H⁺] = X
[A⁻] = X
[HA] = 0.50M - X
Where X is reaction coordinate
Replacing:
8x10⁻⁴ = X² / 0.50-X
4x10⁻⁴ - 8x10⁻⁴X - X² = 0
Solving for X:
X = -0.02M. False solution. There is no negative concentrations
X = 0.0196M. Right solution.
Replacing:
[A⁻] = 0.0196M
Percent of the acid that is dissociated is:
[A⁻] / [HA]₀ * 100
[HA]₀ is its initial concentration = 0.50M
0.0196M / 0.50M * 100
Percent dissociated = 3.92%How many grams of water can be heated from 15.0 oC to 55oC using 4250.0 J.
Answer:
25.42 grams
Explanation:
The specific heat of water is 4.18 J/g •°C, so that means that it takes 4.18 joules of energy to raise one gram of water 1 °C.
Change in temp = 55 - 15 = 40°C
So we can calculate how much energy it would take to raise the temp of one gram of water by one degree using the following
(4.18 J/g•°C) * (40°C) * (1 gram) = 167.2 J
So if it takes 167.2 J of energy to raise on gram of water 40°C, we now we can calculate the amount of grams of water that can heated with 4250 J of energy
(4250 J) ÷ (167.2 J) = 25.42 grams of water can be heated from 15°C to 55°C
a law that protects citizens against xenophobia
The Promotion of Equality and Prevention of Unfair Discrimination Act, (PEPUDA or Equality Act, 4 of 2000
Explanation:
Xenophobia is known as the dislike for the people from other countries.
the law, prevents and prohibits discrimination and harrasment
True or false: If a nuclear chain reaction is uncontrolled, it produces a lot of energy all at once. This is
what happens in an atomic bomb.
Answer: False, I think...
Explanation:
Answer:
True
Explanation:
It is uncontrolled
When water is boiling in a pot, heat energy is being transferred throughout the water by which type of heat transfer?
O Convection
O Conduction
O Radiation
Answer:
it would be Convection.
How/what do I answer this?--> "heat of the chemical reactions"
like this is the question :/
Answer:
The heat of reaction is the energy that is released or absorbed when chemicals are transformed in a chemical reaction. It describes the change of the energy content when reactants are converted into products.
Explanation:
Yeah, that would confuse me a bit but then you read it and then you will get that answer above! Have a great rest of your day!
What are the components of DNA?
A. ribose sugar, cytosine, guanine, adenine, thymine, and phosphate group
B. ribose sugar, cytosine, guanine, adenine, uracil, and phosphate group
C. deoxyribose sugar, cytosine, guanine, adenine, thymine, and phosphate group
D. deoxyribose sugar, cytosine, guanine, adenine, uracil, and phosphate group
Answer:
C
Explanation:
A-T G-C
Answer:
C
Explanation:
EDGE 2022
what is the ph of a 8.4x10^-6 M H+ solution?
While recording the crime scene, the photographer snapped a picture of his partner posing beside the famous victim's body. After printing the photo for his partner, he should just delete the image so nobody gets in trouble. (T/F)
While recording the crime scene, the photographer snapped a picture of his partner posing beside the famous victim's body. After printing the photo for his partner, he should just delete the image so nobody gets in trouble is false.
What is photographer?Photographer is defined as a specialist who concentrates on the craft of shooting pictures with a digital or film camera. We can now describe the present, visualize the future, and visualize the history thanks to photography. The predecessor to the contemporary digital camera was the camera obscura. In the past, paintings were the most popular medium for capturing important historical events.
An approach known as "painting with light" is frequently used by seasoned photographers to expose image details in dim or near-dark lighting. By holding the shutter open for a few seconds or minutes while moving around the scene, the photographer can add light from sources like a flashlight or a flash from a separate camera.
The photographer's partner was photographed posing next to the body of the well-known victim as he documented the murder scene. It is erroneous to say that after printing the photo for his spouse, he should immediately erase it.
To learn more about photographer, refer to the link below:
https://brainly.com/question/25379778
#SPJ2
Which of the following involves a change in chemical properties
Answer: A chemical change occurs when the substance's composition is changed. When bonds are broken and new ones are formed a chemical change occurs.
What determines how atoms will bond?
Answer:
Explanation:
The number of electrons in the outermost shell of a particular atom determines its reactivity, or tendency to form chemical bonds with other atoms.
If you have a solution that is 15 percent by mass of KCl in benzene, what is the new boiling point?
Answer:
https://www.chegg.com/homework-help/questions-and-answers/1-10-points-solution-15-percent-mass-kcl-benzene-new-boiling-point--901-c-b-921-c-c-821-c--q63751186
Explanation: Thats your answer
8. Calculate (H^+), (OH^-), pOH and the pH for a 0.00024 M solution of calcium hydroxide. Must show work!
Answer:
1. [H⁺] = 2.0×10¯¹¹ M
2. [OH¯] = 4.8×10¯⁴ M
3. pOH = 3.3
4. pH = 10.7
Explanation:
From the question given above, the following data were obtained obtained:
Molarity of Ca(OH)₂ = 0.00024 M
We'll begin by calculating the concentration of the hydroxide ion [OH¯]. This can be obtained as follow:
Ca(OH)₂ (aq) —> Ca²⁺ + 2OH¯
From the balanced equation above,
1 mole of Ca(OH)₂ produced 2 moles of OH¯.
Therefore, 0.00024 M Ca(OH)₂ will produce = 2 × 0.00024 = 4.8×10¯⁴ M OH¯
Thus, the concentration of the hydroxide ion [OH¯] is 4.8×10¯⁴ M
Next, we shall determine the pOH of the solution. This can be obtained as follow:
Concentration of the hydroxide ion [OH¯] = 4.8×10¯⁴ M
pOH =?
pOH = –Log [OH¯]
pOH = –Log 4.8×10¯⁴
pOH = 3.3
Next, we shall determine the pH of the solution. This can be obtained as follow:
pOH = 3.3
pH =?
pH + pOH = 14
pH + 3.3 = 14
Collect like terms
pH = 14 – 3.3
pH = 10.7
Finally, we shall determine the concentration of hydrogen ion [H⁺]. This can be obtained as follow:
pH = 10.7
Concentration of hydrogen ion [H⁺] =?
pH = –Log [H⁺]
10.7 = –Log [H⁺]
Divide both side by –1
–10.7 = Log [H⁺]
Take the antilog of –10.7
[H⁺] = Antilog (–10.7)
[H⁺] = 2.0×10¯¹¹ M
SUMMARY:
1. [H⁺] = 2.0×10¯¹¹ M
2. [OH¯] = 4.8×10¯⁴ M
3. pOH = 3.3
4. pH = 10.7
A gas has a volume of 6.00 liters at a temperature of 300 K and a pressure of 1.00 atm what is the volume of the gas in liters at a temperature of 600 K and a pressure of 3.00 atm
Answer:
V₂ = 4.00 L
Explanation:
Given that:
Volume (v1) = 6.00 L
Temperature (T1) = 300 K
Pressure (P1) = 1.00 atm
VOlume (V2) = unknown???
Temperature (T2) = 600 K
Pressure (P2) = 3.00 atm
Using combined gas law equation:
[tex]\dfrac{P_1V_1}{T_1}= \dfrac{P_2V_2}{T_2}[/tex]
[tex]\dfrac{1 \times 6}{300} = \dfrac{3 \times V_2}{600}[/tex]
[tex]\dfrac{1}{50} = \dfrac{1 \times V_2}{200}[/tex]
200 = 50V₂
V₂ = 200/50
V₂ = 4.00 L
Pls help I’ll brainlest and add extra points
Answer:
a top predator, fighting
. Explain why some desert animals excrete uric acid rather than ammonia.
(2 marks)
Answer:
AFAIK
Explanation:
uric acid is much less toxic than ammonia, hence bigger concentrations of it are tolerated in the body. This means you can excrete it while excreting very little water - beneficial wherever water's not abundant.
There's a tradeoff though, uric acid requires more energy to synthesize than ammonia, so pretty much all fish, say, excrete ammonia rather than uric acid - it's no problem to dilute ammonia since there's no water shortage.
ibigay ang kahulugan nito ayun sa paliliwanag
konduktor piloto drayber makinista
Answer:
konduktor
- ang konduktor ay maaaring isang konduktor nga koryente, train o isang taong namumuno sa isang orkestra o isang grupo ng mga mang-aawit.
piloto
-isang tao na tagalipad ng ereplano
drayber
- isang tao na nagmamaniho ng sasakyan
makinista
-ay isang tao na nagpapakilos o nagpapagana ng makina
please give me brainliest.
As the temperature in a sample of gas molecules decreases, which
of the other properties of the gas molecules could be caused to
increase or decrease? *
(Please help me)
Answer:
See Explanation
Explanation:
The kinetic energy of gas molecules is related to the temperature of the gas because temperature is a measure of the average kinetic energy of the molecules of a gas hence the lower the temperature of the gas the lower the average kinetic energy of the molecules of the gas.
The volume of a given mass of gas is directly proportional its absolute temperature(Charles's law). Hence, as the temperature of the gas gas decreases, the gas volume also decreases.
The number of gas molecules is totally independent of the temperature of the gas hence it stays the same.
As the temperature decreases, the number of collision of gas particles decreases as the kinetic energy of the gas particles decreases.
The pressure of a given mass of gas is related to the movement of gas particles. Hence, the lower the temperature the lower the pressure of the gas. Pressure and temperature are directly related hence pressure decreases as temperature decreases.
I have a chemistry question: What would be the % composition of sugar in a drink mix solution if 35.0 g of the mix was dissolved in 70.0 g of water. (Assuming that the drink mix is all sugar)
Answer:
50%
Explanation:
35.0g/70.0g×100%
=50%
For a chemical reaction, the activation energy for the forward reaction is +181 kJ and the activation energy for the backward reaction is +62 kJ. What is the overall energy change for the forward reaction?
Given :
For a chemical reaction, the activation energy for the forward reaction is +181 kJ and the activation energy for the backward reaction is +62 kJ.
To Find :
The overall energy change for the forward reaction.
Solution :
The overall energy change for the forward reaction is :
[tex]\Delta E_f = E_f - E_b\\\\\Delta E_f = 181 - 62 \ Kj\\\\\Delta E_f = 119 \ Kj[/tex]
Therefore, the overall energy change for the forward reaction is 119 Kj.
how many moles of Li2SO4 molecules are in 12.71g?
Answer:
₰₮₤₳V₤
Explanation:
First you must calculate the number of moles in this solution, by rearranging the equation. No. Moles (mol) = Molarity (M) x Volume (L) = 0.5 x 2. = 1 mol.
For NaCl, the molar mass is 58.44 g/mol. Now we can use the rearranged equation. Mass (g) = No. Moles (mol) x Molar Mass (g/mol) = 1 x 58.44. = 58.44 g.
How many total number of hydrogen atoms present in CH4?
Answer:
4 Hydrogen atoms
Answer correctly for brainliest
only answer the question with the 4 choices in the middle
The force that contributed to the formation of planets, determines the motion of bodies in the solar system, and pulls objects to the center of Earth is called
.
The principle that states that an object at rest will stay at rest and that an object in motion will stay in motion is the law of
Answer:
Gravity and Inertia
Explanation:
Just did it on edg 2021 :)
Write the balanced half-reaction that occurs at the anode in a lead-acid (storage) battery during discharge. Phases are optional. anode half-reaction: Write the balanced half-reaction that occurs at the cathode in a lead-acid (storage) battery during discharge. Phases are optional. cathode half-reaction: Write the balanced overall cell reaction that occurs in the lead-acid (storage) battery during discharge. Phases are optional. overall cell reaction:
Answer: Anode: [tex]Pb+SO_4^{2-}\rightarrow PbSO_4+2e^-[/tex]
Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]
Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]
Explanation:
Lead storage battery is a secondary cell used in automobiles and invertors. The anode is made up of lead and undergoes oxidation during discharging and cathode is made up of lead oxide and acts as cathode during discharging. The electrolyte used is dilute .
Lead storage battery acts as electrochemical cell while discharging.
Discharging reaction for Anode:
Discharging reaction for Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]
Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]
A lead storage battery is an energy storage device. At the anode lead and sulfate ion reacts to produce Lead(II) sulfate and release two electrons.
What are anode and cathode?In secondary cells or the recharge-discharge cells during recharge, the positive electrode is the anode, while during discharge cathode is the positive electrode.
The anode (lead) of the cell undergoes an oxidation reaction during the discharge, whereas the lead oxide or the cathode undergoes reduction.
The discharging reaction at the anode of the cell is given as,
[tex]\rm Pb + SO_{4}^{2-} \rightarrow PbSO_{4} + 2e^{-}[/tex]
The discharging reaction at the cathode of the cell is given as,
[tex]\rm PbO_{2} + 4H^{+} + SO_{4}^{2-} + 2 e^{-} \rightarrow PbSO_{4} + 2H_{2}O[/tex]
The overall cell reaction is given as,
[tex]\rm Pb + 2SO_{4}^{2-} + PbO_{2} + 4H^{+} \rightarrow 2PbSO_{4} + 2H_{2}O[/tex]
Therefore, the gain and loss of electrons are represented at the cathode and the anode of the cell.
Learn more about discharge battery here:
https://brainly.com/question/8341588
What is the Molar mass of zinc
65.38 u (or g)
I just searched it up
In this experiment, you will need to prepare 250.0 mL of 0.100 M KCl(aq) solution. Determine the mass in grams of potassium chloride required to prepare this solution. Type your numerical answer (no units) in the box below. Even though the number of significant figures is limited to three by the inputs, please report your answer to four significant figures.
Answer: The mass in grams of potassium chloride required to prepare this solution is 1.862 grams
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in ml
moles of [tex]KCl[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{xg}{74.5g/mol}[/tex]
Now put all the given values in the formula of molality, we get
[tex]0.100=\frac{x\times 1000}{74.5g/mol\times 250.0ml}[/tex]
[tex]x=1.862g[/tex]
Therefore, the mass in grams of potassium chloride required to prepare this solution is 1.862 grams
Ar
Si
K
Al
An atom of which element in the table above has the highest
number of neutrons?
Answer: ar
Explanation:
4.3 x 10^2 - 7.0 x 10^2 in scientific notation
Can someone please help me with this question.
Answer:
A-Sphalerite + Dioxygen+Zinc Oxide+Sulfur Trioxide
B-Sodium+Magnesium+Sodium iodide
Explanation:
Heyyy love good luck i may be wrong on letter B so if it is thats my bad but A should be correct :)
intermolecular forces between particles are
Explanation:
Intermolecular forces hold multiple molecules together and determine many of a substance's properties. All of the attractive forces between neutral atoms and molecules are known as van der Waals forces, although they are usually referred to more informally as intermolecular attraction.
Intermolecular forces are the forces of attraction or repulsion which act between neighboring particles (atoms, molecules, or ions ). These forces are weak compared to the intramolecular forces, such as the covalent or ionic bonds between atoms in a molecule.