If the density of a substance is d=2.1g/cm^3 what is the mass of 20.0mL of this substance

The answer to your question is:

Answer:

A. Particles are parked closely together in an organized way and maintain their size, shape and volume.

Explanation:

These are some characteristics of a solid;

✨Thanks!!!!❤✨

Answer:

Bin 1 points to a carbon bonded to a double bonded carbon and single bonded to two hydrogens. --- trigonal planar, tetrahedral

Bin 2 points to a carbon double bonded to a carbon and single bonded to a carbon and one hydrogen.------- trigonal planar, tetrahedral

Bin 3 is a carbon single bonded to two carbons and single bonded to two hydrogens. ----- tetrahedral, tetrahedral

Bin 4 is the same as bin 3.--------tetrahedral, tetrahedral

Bin 5 is a carbon triple bonded to a carbon and single bonded to a carbon.---- linear, tetrahedral

Bin 6 is triple bonded to a carbon and single bonded to a hydrogen.---linear, tetrahedral

Explanation:

A single C-C or C-H bond is in a tetrahedral geometry, the carbon atom is bonded to four species with a bond angle of 109°.

A C=C bond is trigonal planar with a bond angle of 120°.

Lastly, a C≡C bond has a linear geometry with a bond angle of 180° between the atoms of the bond.

Magnesium ( Mg+² ) has a full outer shell .

K and L shells of an atom are full , then it will have a total of 2 + 8 = 10 electrons in it . We know that magnesium has 12 electrons in it . Magnesium having 2 free electrons.

Answer:

Al ascender las burbujas van aumentando de tamaño.

Explanation:

Las burbujas que produce el buzo debajo del agua son pequeñas moléculas de dióxido de carbono gaseoso producto de la respiración del mismo.

Ahora, a medida que las burbujas suben a la superficie, la presión que sufren estas (Presión debido al agua), es menor conforme van ascendiendo debido a la ley de Boyle: A medida que la presión aumenta, el volumen va disminuyendo.

Esto significa que al ascender las burbujas van aumentando de tamaño debido a que la presión que sufren estas es menor que cuando están a mayores profundidades.

ANSWER: It's (ii) I do believe

The sugar is fermented and the ethanol and carbon dioxide are produced. The fermentation of ethanol is used in bread baking and the fermentation found in grapes makes beer.

Fermentation is the mechanism by which sugar is converted into alcohol. Ethanol Fermentation can be described as a biological process that converts sugars such as glucose, sucrose, and fructose into cellular energy by producing ethanol and carbon dioxide as a side effect.

Alcoholic fermentation is called anaerobic since yeast conducts this transformation in the absence of oxygen. The fermentation of ethanol has applications such as the manufacture of alcoholic drinks, ethanol fuel manufacture, and bread baking.

Fermentation of the natural sugars can be seen in grapes creating wine or beer as well as in apples and pears producing cider and Perry, respectively. Alcoholic fermentation takes place in species of fish, where it offers energy when oxygen is scarce.

Learn more about fermentation, here:

https://brainly.com/question/13050729

#SPJ6

Answer:

29

Explanation:

$1=4 quarters

$7 = 28 quarters ( multiply 7 times 4)

.25 = 1 quarter

add 28 and 1

Answer:29

Answer:

atomic numbers

Explanation:

Atoms are the unit of molecules and compounds or matter. They have their atomic numbers and mass. Atoms of different elements must have different atomic numbers. Thus, option C is correct.

An atomic number is the total number of protons in a nucleus that is an essential factor in determining the place and position of the atom in the periodic chart.

Though the nucleus is made of neutrons and protons, the atomic number is only defined by the number of protons alone. Hence, the number of protons is equivalent to the atomic number.

The number of the protons and neutrons together makes the atomic mass of the element that is expressed at the lower of the symbol, whereas the atomic number is written at the upper of the symbol.

Therefore, the atomic number is different in each atom.

Learn more about atomic numbers here:

https://brainly.com/question/13464692

#SPJ6

Answer:c

Explanation:

I put a and got it wrong and c was correct

J.J. Thomson gave the plum pudding model for the atomic structure. The model represents the plums by electrons and pudding as large positively charged masses. Thus, option c is correct.

The Plum pudding model was given by J.J. Thomson to represent the sub-atomic particles of the atom and their distribution. The plum was used to depict the electrons that carried a negative charge.

The pudding represented the protons that were present like the sea and covered the whole atom. The protons carried a positive charge and according to the model were distributed fully in the atom.

It was an important discovery and model that gave rise to more accurate models. The model proposed the presence of the electrons that later were considered of crucial importance.

Therefore, option c. the plum is electron embedded in the pudding of the protons.

Learn more about the Plum pudding model, here:

https://brainly.com/question/3218763

#SPJ2

Answer:

D is the answer

Explanation:

distillation

Answer:

distillation

Explanation:

Answer:

The raccoon drank 120 ml of water.

Explanation:

All you have to do is take the 360 ml of water and to find what 1/3 of it is you divide 360 by 3 to get 120 ml of water.

Hope that helps and have a great day!

Answer:

ill say a

Explanation:

it make the most cense

They can only be monoatomic.

Nearly all elements form monatomic gases at extremely high temperatures or when exposed to enough radiation because there's too much kinetic energy for bonds to form or the energy breaks chemical bonds between atoms.

There are seven diatomic elements given below

Learn more about elements here https://brainly.com/question/18096867

#SPJ2

Answer:

B- 0.1875 is denser.

hope this helps

Answer:

The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants.

Explanation:

hope that helps

A litre is a unit of volume in the metric system. Hence, option B is correct.

Volume – How much space an object or substance takes up.

Measured in cubic meters (m3), litres (L) & millilitres (mL).

Volume is the measure of the 3-dimensional space occupied by matter, or enclosed by a surface, measured in cubic units.

The SI unit of volume is the cubic meter (m3), which is a derived unit.

Volume is the measure of the capacity that an object holds.

For example, if a cup can hold 100 ml of water up to the brim, its volume is said to be 100 ml.

Volume can also be defined as the amount of space occupied by a 3-dimensional object.

Hence, option B is correct.

Learn more about the volume here:

https://brainly.com/question/1578538

#SPJ2

Answer:

any two

Explanation:

Gravitation force or gravitational attraction is a force of pulling or attraction that exist  between any two bodies that have a mass. Each and every body attract each other with the force of gravity due to their masses.

Every object in this universe having mass and distance attracts every other object.

Answer:

The answer is C. Tellurium.

Explanation: If you look at the periodic table, tellurium is shown to have the greatest atomic mass. It is calculated easily. The answer is right on edge 2020.

Tellurium is the element having highest atomic mass.

Tellurium is the element has the greatest average atomic mass followed by iodine, krypton and bromine. The atomic mass of Tellurium is 127.6 u, the atomic mass of iodine is 126.9 u, the atomic mass of krypton is 83.8 u and the atomic mass of bromine is 79.9 u so on the basis of given data we can say that tellurium is the element that has the highest atomic mass or mass number.

Learn more: https://brainly.com/question/17598036

Answer:

Solid:

shape: definite

volume:definite

closeness...: tightly packed

motion ..: vibrate in their position

liquid:

shape: indefinite

volume: definite

closeness: loosely packed

motion... : slide past each other

gas:

shape: indefinite

volume: indefinite

closeness: far apart

motion..: random movement

Explanation:

hope this helped you .. please mark as brainliest

Answer:

5.46x[tex]10^{8}[/tex]

Explanation:

just move the decimal however many places to the left until there is only one digit to the left of it and then square the ten by that number

Answer:

THE VOLUME OF THE BALLOON IS 1.45 L

Explanation:

At sea level:

Volume = 2 L

Pressure = 1 atm

Temperature = 12 °C

At 30000 ft altitude:

Pressure = 0.30 atm

Temperature = -55°C

Volume = unknown

Using the general gas formula:

P1 V1 / T1 = P2 V2 / T2

Re-arranging the formula by making V2 the subject of the equation, we have;

V2 = P1 V1 T2 / T1 P2

V2 = 1 * 2 * 12 / 0.30 * 55

V2 = 24 / 16.5

V2 = 1.45 L

The volume of the balloon at the temperature of -55 C and 0.30 atm is 1.45 L

Answer : The identity of the substance is gypsum.

Explanation : Given,

Mass of weighing boat = 2.69 g

Mass of unknown pieces including weighing boat = 18.01 g

Initial volume = 25.7 mL

Final volume = 32.3 mL

First we have to calculate the mass of unknown pieces.

Mass of unknown pieces = Mass of unknown pieces including weighing boat - Mass of weighing boat

Mass of unknown pieces = 18.01 g - 2.69 g

Mass of unknown pieces = 15.32 g

Now we have to calculate the volume of unknown pieces.

Volume of unknown pieces = Final volume - Initial volume

Volume of unknown pieces = 32.3 mL - 25.7 mL

Volume of unknown pieces = 6.6 mL

Now we have to calculate the density of unknown pieces.

[tex]\text{Density of unknown pieces}=\frac{\text{Mass of unknown pieces}}{\text{Volume of unknown pieces}}[/tex]

Now putting all the given values in this formula, we get:

[tex]\text{Density of unknown pieces}=\frac{15.32g}{6.6mL}[/tex]

[tex]\text{Density of unknown pieces}=2.32g/mL[/tex]

From the given table we conclude that the unknown piece is gypsum whose density is 2.32 g/mL.

Therefore, the identity of the substance is gypsum.

The material with the density equivalent to the unknown piece has been Gypsum. Thus, the unknown piece has been gypsum.

Density can be defined as the mass of the substance per unit volume.

To calculate the density of the unknown piece, the mass has been calculated as:

Mass of unknown piece = Mass of weighing boat with the unknown piece - Mass of weighing boat

Mass of unknown piece = 18.01 g - 2.69 g

Mass of unknown piece = 15.32 grams.

The volume of the unknown piece can be calculated as:

The volume of unknown piece = Final volume - Initial volume

The volume of the unknown piece = 32.3 mL - 25.7 mL

The volume of the unknown piece = 6.6 mL.

The density can be expressed as:

Density = [tex]\rm \dfrac{Mass}{Volume}[/tex]

The density of the unknown piece = [tex]\rm \dfrac{15.32\;g}{6.6\;ml}[/tex]

The density of the unknown piece = 2.32 g/mL.

From the given set of pieces, the material with the density equivalent to the unknown piece has been Gypsum. Thus, the unknown piece has been gypsum.

For more information about density, refer to the link:

https://brainly.com/question/952755

Answer:

its 459 L

Explanation:

Answer:

²⁵ Mg = 10.00%

²⁶ Mg = 11.0%

Explanation:

Given that:

Magnesium ²⁴Mg has an abundance of 78.99%

Hence, (100 - 78.99)% = 21.01%

21.01% is the abundance of ²⁵ Mg and ²⁶ Mg

Suppose,

²⁵ Mg = x

²⁶ Mg = (21.01 - x)%

Then;

avg. atomic mass = [tex]\dfrac{78.99}{100 }(23.9850)+\dfrac{x}{100}(24.9858) +\dfrac{21.01-x}{100}(25.9826)[/tex]

where the avg. atomic mass = 24.3050

∴

[tex]24.3050 \times 100 = {78.99}(23.9850)+\dfrac{x}{100}(24.9858) +\dfrac{21.01-x}{100}(25.9826)[/tex]

2430.5 = 2440.46915 -0.9968 x

0.9968x = 2440.46915 - 2430.5

0.9968x = 9.96915

x  =  9.96915/0.9968

x  =  10.00%

∴ Recall that:

²⁵ Mg = x

²⁶ Mg = (21.01 - x)%

²⁵ Mg = 10.00%

²⁶ Mg = (21.01 - 10.00)%

²⁶ Mg = 11.0%

The natural abundances of the other two isotopes, that is, Mg-25 and Mg-26 are 10% and 11.01%.

It is the abundance of isotopes of a chemical element as naturally found on a planet.

Based on the given information:

Now the natural abundance of all the isotopes of Mg is 100%.

Mg-24 + Mg-25 + Mg-26 = 100

Mg-25 + Mg-26 = 100-78.99

Mg-25 + Mg-26 = 21.01

Now let us assume that Mg-25 is x% then Mg-26 will be (21.01% -x).

Now,

Average atomic mass of Mg = [(Natural abundance of Mg-24) × (isotopic mass of Mg-24) + (Natural abundance of Mg-25) × (Isotopic mass of Mg-25) + (Natural abundance of Mg-26) × (Isotopic mass of Mg-26)]

Putting the values we get,

24.3050 amu = (78.99% × 23.9580 amu) + (x% × 24.9858 amu) + (21.01% - x%) × 25.9826 amu

24.3050 amu = 18.9458 + 24.9858 × x + 5.4589 - (25.9826x)

24.3050 = 24.4047 - (0.9968x)

0.9968x = 24.4047 - 24.3050

x = 0.1000

x = 10%

The natural abundance of Mg-25 is 10%.

The natural abundance of Mg-26 = 21.01% - x% = 21.01% - 10% = 11.01%.

Thus, the natural abundances of the other two isotopes are 10% and 11.01%.

Find out more information about natural abundances here:

https://brainly.com/question/4880347

Answer:

C

Explanation:

Measurements are always specific numerical values that you observe. Taking your temperature results in a number. Reading your watch results in a specific time that you get. Weighing a cantaloupe results in a specific measurement in kilograms or pounds. Asking the weather will result in an answer, like sunny or rainy, which aren't specific numerical values.

The following is not an example of making a measurement is asking for weather as it depends on weather reports. option C is correct.

A  weather report is what  tells you about the high and low temperatures for the past day o weather the rain is going to happen or not which can be predict only.

Weather report also tells you the present temperature of the day and may  tell you the average temperature for the day which can only be predict cannot be measured in any aspect.

Therefore, following is not an example of making a measurement is asking for weather as it depends on weather reports. option C is correct.

Learn more about weather report, here:

https://brainly.com/question/18196253

#SPJ2

Answer:

 true.

Explanation:

Answer:

Try using this formula so useful.

Explanation:

Particles = atoms/molecules etc.

A= is your given

B= is what you want

Answer:

Explanation:

Chemistry is derived from Alchemy. Alchemy is derived from al-chemiya, Kimiya is an Arabic word.

Chemistry is branch of science that involves study of structure of atoms and molecules, investigation of their properties , the changes that occur during chemical reactions and using the chemical reactions to form new substances. It has five branches: Analytical, Organic, Inorganic, Physical and Biochemical.

Answer:

vznzbzvbajavavsytttuydr