Answer:
Nitrogen
Explanation:
The element nitrogen cannot be a product in the given reaction.
The reaction is;
HCl + CaCO₃
According to the law of conservation of matter, "matter is neither created nor destroyed in the cause of a chemical reaction".
The law suggests that, in a chemical reaction, we end up with the same species we started with. Although due to rearrangement of bonds, new compounds can form;
Starting atoms
H
Cl
Ca
O
These species will also be found in the product.
Considering the principles of KMT, which scenario would result in an increase of particles effective collisions at STP None of the above None of the above In a balloon In a balloon A container with large volume A container with large volume A container with small volume
Answer:
A container with small volume
Explanation:
The question is obviously incomplete because the image attachments are missing.
However, it is necessary to note that, the effective collisions depends on the volume of the gas.
The lesser the gas volume, the greater the effective collision between particles at STP.
Hence from the KMT, the scenario having the least volume of gas will have the greatest magnitude of effective collisions.
Consider the element sodium. It's atomic number is __________ and equals ___________.
Answer:
11 and equals the number of protons
Explanation:
choose the letter that best describes the behavior of a substance during a phase change:
/A/ neither absorbs or releases energy
/B/ always absorbs energy
/C/ always releases energy
/D/ either absorbs or releases energy
Answer:
/D/ either absorbs or releases energy
Explanation:
During a phase change energy is either absorbed or released.
A phase change is a reversible process which occurs when a substance changes is its state from one form to another.
Phase changes are used to delineate physical changes.
A phase diagram provides a graphic representation of the change. The diagram can be 2 dimensional or 3 dimensional.What is Aerosol,sol and gel
which one only has one type of
atom In it.
Element , compound
Answer:
element
Explanation:
Can someone help me with number 4 please?
Oxygen atoms have six outer electrons
Write the symbol for an oxide ion.
Answer:
[tex]O^{2-}[/tex] is the symbol for an oxide ion
how many joules are needed to heat 20.0 g of Au from 10 C to 50 C
Answer:
Its actually Q = 103.2 J
Explanation:
What causes the
differences in physical characteristics like hair color among people?
1. diferent versions of genes
2. variations in DNA length
3. different numbers of chromosomes
4. variations in cell nucleus size
Answer:
b
Explanation:
i took the test
4. Fill in the space.
(a) Force is measured in the unit of
(b) A body moves in a circular path due to
(c) A
exerts force on iron, cobalt and nickel.
(d) Every object on the earth has
(e) We are able to write because of
(f) The change in displacement in unit time is
(g) The S.I. unit of velocity is
for
and of acceleration is
Answer:
N
Some sort of pulling force to the center
Magnet
Mass
Gravity
Velocity
m/s and m/s^2
Explanation:
arrangement of small particles in substance is
Answer:
The particle model represents particles by small, solid spheres.It describes the arrangement, movement and energy of particles in a substance. The model can be used to explain the physical properties of solids, liquids and gases.
Answer:
The particle model represents particles by small, solid spheres. ... It describes the arrangement, movement and energy of particles in a substance. The model can be used to explain the physical properties of solids, liquids and gases.
Explanation:
What is the definition of a transverse wave and what does it look like?
Answer:
transverse waves, motion in which all points on a wave oscillate along paths at right angles to the direction of the wave's advance.
Why is the nitrogen cycle considered a closed system?
Answer:
because nitrogen is fixed by bacteria and assimilated by plants
Explanation:
Answer:
It is a considered a closed system because nitrogen is fixed by bacteria and is taken in by plants.
Explanation:
How do minerals differ from ores?
Ores: metal/coal (iron, gold, coal)
Mineral: not metal, (Granite, limestone,
SiS is what type of mineral?
Where exactly is an orbital? I understand they are a volume where we expect to find electrons 90% of the time but I don't understand where their shapes are and fit on an atom, and the different forms of orbitals confuse me a little. Can someone explain me where they are with the help of an image? Pardon me if my question isn't very clear
Answer:
95% of the time (or any other percentage you choose), the electron will be found within a fairly easily defined region of space quite close to the nucleus. Such a region of space is called an orbital. You can think of an orbital as being the region of space in which the electron lives
The diagram shows a stage in meiosis.
Which stage of meiosis is pictured?
metaphase I
anaphase I
metaphase II
anaphase II
Answer:
It's not A or D
Explanation:
I was looking all over for answers and I saw A and D, so I used A. It was wrong, so I retook it and used D. Wrong. Your answer is either B or C. I am sorry I couldn't help more.
Answer:
it is b same question was on my quiz
Explanation:
Pedro is baking a cake for his experiment on chemical changes. He knows a chemical change will occur when he puts the cake mixture in the oven. He would like to know what will happen when the cake is removed from the oven. What prediction would you make for Pedro's experiment? A. The chemical changes occurred because the chemicals changed. B. The chemical changes occurred because there was a change in light energy. C. The fruit and the hamburgers were affected by an increase in heat energy. D.The fruit and the hamburgers were affected by a decrease in heat energy.
Answer:
A. The chemical changes occurred because the chemicals changed.
Explanation:
When baking a cake several chemical reactions occur that change the chemical composition of the ingredients used in baking. An ingredient like baking powder releases carbon dioxide when it undergoes a temperature change in the oven. A chemical change is supposed to change the form of a substance.
An endothermic reaction also occurs when the ingredients absorb heat energy to produce several changes. The firmness of the cake occurs because of the heat absorbed by the proteinous content of the egg.
list in the following elements in order of smallest to largest atomic radius. F, Cl, Br, l
And which has a larger atomic radius?
Please he with c
Please I swear I am crying
If an object has a mass of 180 g and a density of 6 g/cm^3, what is the volume of the object?
Answer:
The answer is 30 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass = 180 g
density = 6 g/cm³
We have
[tex]volume = \frac{180}{6} \\ [/tex]
We have the final answer as
30 cm³Hope this helps you
These models show the electron structures of two different nonmetal elements. Element 1 at left has a purple circle at center with 2 concentric black lines around it. The first line has 2 small green balls on it. The second line has 8 small green balls on it. Element 2 at right has a purple center with 5 concentric circles around it, with the first circle innermost. The first circle has 2 small green balls on it, and the second circle has 8 small green balls on it. The third circle has 18 small green balls on it, and the fourth circle has 18 small green balls on it. The fifth circle has 6 small green balls on it. Which element is likely more reactive, and why?
Answer:
Element 2
Explanation:
If we look at the model stated for element 1, it is clear that element 1 must be a noble gas. It has eight electrons in its outermost shell this implies that it has already attained a complete octet of electrons and is reluctant towards chemical reaction.
The second element belongs to group 16 since it has six electrons on its outermost shell. It is certainly more reactive than element 1 which is a noble gas.
Answer: D
Element 2 is more reactive because it does not have a full valence shell, so it will attract electrons.
Explanation: Answer on Edgenuity
2. In a well-known movie, Raiders of the Lost Ark, there is a famous scene in which the hero tries to outwit the designers of a trap by replacing a gold statue with a bag of sand of about the same volume.
a) Knowing that the density of gold is 19.3 g/mL and sand is 3.1 g/mL, does this seem like a scientifically reasonable plan? Why or why not?
b) In the movie, the hero grabs the gold statue with one hand and appears to handle it quite easily. Given that the volume of the statue appears to be about 1 L, find the mass of the statue.
Answer:
I cant answer B, but I can answer A, and I don't think it is a scientifically reasonable plan.
Explanation:
The bag of sand weighs less than the gold statue, and yes the bag of sand seems like it would keep the trap from activating, but you would scientifically have to put something that was the same weight as the gold statue on the pedestal that the statue is on.
You are exploring a dormat volcano. As you walk, you first notice volcanic ash. As you continue in the same direction you find pieces of Lapilli. At the point where you find the lapilli are you closer or further away from the crater? Please answer this im desperate!
Answer:
you are closer
Explanation:
lapilli is formed from volcanic ash particles, which is something we saw earlier. the particles turn into lapilli when they get moist usually by the magma caused from eruptions
At 9°C a gas has a volume of 6.17 L. What is its volume when the gas is at standard temperature?
Answer:
V₂ = 5.97 L
Explanation:
Given data:
Initial temperature = 9°C (9+273 = 282 K)
Initial volume of gas = 6.17 L
Final volume of gas = ?
Final temperature = standard = 273 K
Solution:
Formula:
The Charles Law will be apply to solve the given problem.
According to this law, 'the volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure'
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
V₂ = V₁T₂/T₁
V₂ = 6.17 L × 273K / 282 k
V₂ = 1684.41 L.K / 282 K
V₂ = 5.97 L
Gamma
ray
Which has the longest wavelength?
Ultra-
violet Infrared
Radio
Which has the highest frequency?
X-rays Visible
Microwave
WWW
Answer:
Radio waves
X-rays Visible
Explanation:
The wavelength of a wave is the difference between successive crests on a wave line. Waves with a very high wavelength have low energy.
Frequency is the number of waves that pass a point per unit of time. The higher the frequency, the higher a wave's energy.
From the given spectrum, wavelength increases from left to right. This puts radio waves as the wave with the longest wavelength. It is also right to say, it has the least energy. Also, frequency decrease from left to right. Gamma rays have the highest frequency in the spectrum. This is followed by x-rays.Answer:
Radio waves
X-rays Visible
Explanation:
The transition metals (with the exception of Zn, Cd and Hg) are very much hard and have low volatility. Why Zn ,Cd and Hg has low melting points. (a) These have all their electrons paired. (b) These have maximum number of unpaired electrons. (c) These have very strong metallic bonding. (d) These have more metal-metal bonding.
Answer:
Zn ,Cd and Hg has low melting points because - These have all their electrons paired.
Explanation:
These have all their electrons paired -: All the electrons in the d-subshell are combined with Zn , Cd and Hg. The metallic bonds present in them are, therefore, weak. This is why they have low points of melting and bolting. therefore , this statement is true. These have maximum number of unpaired electrons. Since , these transition metals have all electrons paired , so this statement is incorrect.These have very strong metallic bonding -: Zn, Cd and Hg d-orbital are completely filled. They have poor metallic bonding and less compact packing due to their fully filled d-orbitals, so all of them are volatile in nature. Therefore, this statement is also not valid .These have more metal-metal bonding. -: Since , their metallic bond is weak , so this statement is not true .Hence , the correct option is A (These have all their electrons paired).
Select the measurement with that represents the least amount of pressure.
Select one:
a. 3 atm
b. 3.039 x 1013 Pa
c. 2.280 x 10^3 mm Hg
d. 40 psi
Answer:
a 3atm
Explanation:
or d 40 psi because it is true and corect [b 3.0398 21oinwex id cn uerfh uh 837hf uxhoec
Question 2 of 10
What are Van der Waals forces?
A. Forces that change polar molecules into nonpolar molecules
B. Very strong forces that exist between two different molecules
O c. Hydrogen bonds in nonpolar molecules caused by a permanent
dipole
D. Small dipole attractions between molecules caused by a
temporary electron shift
SEB
Answer:
D
Explanation:
Van der Waal forces are small dipole attractions between molecules caused by a temporary electron shift ,here, the option D is correct.
What are Van Der Waal forces?Van der Waals forces exist among all kinds of atoms and molecules. The origin of this force stems from the instantaneous dipole-induced dipole interactions among adjacent polar atoms and molecules.
Among polar molecules, there are three components that contribute to the total forces: the induction force, the orientation force and the dispersion force.
The Van Der Waal forces that act between macroscopic bodies and surfaces in a solvent medium are relevant to the phenomena of protein adsorption.
Van Der Waal forces are the small dipole attractions between molecules caused by a temporary electron shift , thus, option D is correct.
Learn more about Van Der Waal forces here:
https://brainly.com/question/14395915
#SPJ2
How many electron shells are in period 1
Answer:
1
Explanation:
The amount of electron shells is the number of the period