In which one of the following species is the best Lewis structure a resonance structure?
a. NH_3 b. CO_2 c. SF_6 d. O_2 e. CO^2-_3

The index of hydrogen deficiency (or degree of unsaturation) of the hormone cortisol is: 7.

To determine the index of hydrogen deficiency (IHD) or degree of unsaturation of the hormone cortisol, you need to follow these steps:
Step 1: Identify the molecular formula of cortisol. The molecular formula for cortisol is [tex]C_{21}H_{30}O_5[/tex].

Step 2: Calculate the IHD using the formula:
IHD = (2C + 2 + N - X - H) / 2
where C is the number of carbon atoms,
N is the number of nitrogen atoms,
X is the number of halogen atoms (F, Cl, Br, I), and
H is the number of hydrogen atoms.

Step 3: Apply the formula to the molecular formula of cortisol:
IHD = (2 * 21 + 2 + 0 - 0 - 30) / 2
IHD = (42 + 2 - 30) / 2
IHD = 14 / 2
IHD = 7

To know more about "Index of hydrogen deficiency" refer here:

https://brainly.com/question/31416082#

#SPJ11

Answer:

Only boiling water is needed to cook your couscous, but the important bit is the couscous to water ratio, you should abide by the 1:1 rule. So, for 60g of couscous, you will need 60ml of boiling water.

It is cooked

When 2.3 g of sodium interacts with 2.85 g of fluorine, 6.30 g of sodium fluoride is produced.

The mass of sodium fluoride formed when 2.3 g of sodium reacts with 2.85 g of fluorine can be calculated using stoichiometry and the balanced chemical equation for the reaction:

2 Na + F₂ → 2 NaF

From the equation, we can see that the mole ratio of Na to NaF is 2:2, or 1:1, and the mole ratio of F₂ to NaF is 1:2. So, we need to determine the limiting reactant to find out how much NaF is produced.

Using the molar masses of Na and F₂, we can calculate the number of moles of each reactant:

moles of Na = 2.3 g / 23.0 g/mol = 0.10 mol

moles of F₂ = 2.85 g / 38.0 g/mol = 0.075 mol

Since F₂ is the limiting reactant (it produces less NaF than Na), we will use its number of moles to calculate the mass of NaF:

moles of NaF = 0.075 mol F₂ × (2 mol NaF / 1 mol F₂) = 0.15 mol NaF

mass of NaF = moles of NaF × molar mass of NaF

= 0.15 mol × 41.99 g/mol

= 6.30 g

Therefore, 6.30 g of sodium fluoride is formed when 2.3 g of sodium reacts with 2.85 g of fluorine.

To know more about the Fluoride, here

https://brainly.com/question/21726089

#SPJ1

The compound that forms a diazonium ion when treated with NaNO2 in aqueous HCl is N, N-dimethylaniline.

Here's a step-by-step explanation:
1. NaNO2 and HCl react together to form nitrous acid (HNO2).
2. Nitrous acid reacts with N, N-dimethylaniline, which contains an aromatic amine group, to form the diazonium ion.
3. The other compounds do not have the required aromatic amine group necessary to form a diazonium ion. Para-nitrotoluene has a nitro group, ethylamine has an aliphatic amine, and triethylamine has tertiary aliphatic amine, none of which form diazonium ions under these conditions.
So, the correct answer is b. N, N-dimethylaniline.

learn more about diazonium ion Refer:https://brainly.com/question/15318623

#SPJ11

The compound that forms a diazonium ion when treated with NaNO2 in aqueous HCl is N, N-dimethylaniline.

Here's a step-by-step explanation:
1. NaNO2 and HCl react together to form nitrous acid (HNO2).
2. Nitrous acid reacts with N, N-dimethylaniline, which contains an aromatic amine group, to form the diazonium ion.
3. The other compounds do not have the required aromatic amine group necessary to form a diazonium ion. Para-nitrotoluene has a nitro group, ethylamine has an aliphatic amine, and triethylamine has tertiary aliphatic amine, none of which form diazonium ions under these conditions.
So, the correct answer is b. N, N-dimethylaniline.

learn more about diazonium ion Refer:https://brainly.com/question/15318623

#SPJ11

To synthesize 2-methyl-2-pentanol using a Grignard reaction, we would need to start with 2-bromopentane and acetone. The Grignard reagent would be prepared by reacting magnesium metal with bromoethane in dry ether.

Then, the Grignard reagent (ethylmagnesium bromide) would be added to acetone to form the alcohol product, which can be isolated and purified.

The overall reaction can be represented as follows: 2-bromopentane + Mg → ethylmagnesium bromide, ethylmagnesium bromide + acetone → 2-methyl-2-pentanol

The mechanism for this reaction involves the nucleophilic addition of the Grignard reagent to the carbonyl group of acetone, followed by protonation of the intermediate to form the alcohol product.

To know more about Grignard synthesis, refer here:

https://brainly.com/question/30887376#

#SPJ11

2.97 grams of Na2CO₃ should be mixed with 5.00 grams of NaHCO₃ to produce 100 ml of buffer with pH 10.00.

To prepare a buffer with pH 10.00, we need to mix sodium carbonate (Na₂CO₃) and sodium bicarbonate (NaHCO₃) in the appropriate ratio to obtain the desired pH.

The pH of the buffer can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pKa is the dissociation constant of the weak acid in the buffer (in this case, carbonic acid, H₂CO₃), [A-] is the concentration of the conjugate base (in this case, the carbonate ion, CO₃²⁻), and [HA] is the concentration of the weak acid (in this case, the bicarbonate ion, HCO³⁻).

At pH 10.00, the pKa of carbonic acid is approximately 10.33. Therefore, we can use the Henderson-Hasselbalch equation to determine the ratio of [A-]/[HA]:

10.00 = 10.33 + log([CO₃²⁻]/[HCO³⁻])

-0.33 = log([CO₃²⁻]/[HCO³⁻])

10^(-0.33) = [CO₃²⁻]/[HCO³⁻]

0.47 = [CO₃²⁻]/[HCO³⁻]

Since we are given the mass of NaHCO₃ (5.00 g), we can use its molar mass (84.01 g/mol) and the desired concentration of the buffer (100 ml) to calculate the concentration of NaHCO₃:

molar mass of NaHCO₃ = 84.01 g/mol

moles of NaHCO₃ = 5.00 g / 84.01 g/mol = 0.0595 mol

volume of buffer = 100 ml = 0.1 L

concentration of NaHCO₃ = moles / volume = 0.595 M

We can then use the equation [CO₃²⁻]/[HCO³⁻] = 0.47 to determine the concentration of Na2CO3 needed to prepare the buffer:

0.47 = [Na₂CO₃] / [NaHCO₃]

[Na₂CO₃] = 0.47 * [NaHCO₃] = 0.47 * 0.595 M = 0.28 M

Finally, we can use the molar concentration of Na₂CO₃ and the desired volume of the buffer (100 ml) to calculate the mass of Na₂CO₃ needed:

molar mass of Na₂CO₃ = 105.99 g/mol

moles of Na₂CO₃ = concentration * volume = 0.28 M * 0.1 L = 0.028 mol

mass of Na₂CO₃ = moles * molar mass = 0.028 mol * 105.99 g/mol = 2.97 g

Therefore, 2.97 grams of Na₂CO₃ should be mixed with 5.00 grams of NaHCO₃ to produce 100 ml of buffer with pH 10.00.

Know more about buffer here: https://brainly.com/question/22821585

#SPJ4

The gas that occupies the smallest volume at STP is 35.45 g Cl₂ (option C).

To determine the volume of each option, we Will need to convert them to moles first:

a) 1.000 mol CO₂ = 1.000 mol (already given)

b) 4.032 g H₂ / (2.02 g/mol) = 2.000 mol H

c) 35.45 g Cl₂ / (70.90 g/mol) = 0.500 mol Cl₂

d) 6.022×1023 molecules O₂ / (6.022×1023 molecules/mol) = 1.000 mol O₂

Now, we calculate the volume of each gas at STP:

a) 1.000 mol CO₂ × 22.4 L/mol = 22.4 L

b) 2.000 mol H₂ × 22.4 L/mol = 44.8 L

c) 0.500 mol Cl₂ × 22.4 L/mol = 11.2 L

d) 1.000 mol O₂ × 22.4 L/mol = 22.4 L

Based on these calculations, 0.500 mol Cl₂ (option C) occupies the smallest volume at STP, which is 11.2 L.

Learn more about volume at STP: https://brainly.com/question/24050436

#SPJ11

Sodium methoxide will act as a nucleophile, attacking the carbon atom bonded to the bromine atom. The bromine will then leave as a bromide ion (Br-), and the major product will have a methoxy (OCH3) group in place of the bromine.

The major product formed when the alkyl bromide is treated with specific reagents:

Learn more about Sodium Methoxide and T-butoxide in DMSO

brainly.com/question/17205285

#SPJ11

Sodium methoxide will act as a nucleophile, attacking the carbon atom bonded to the bromine atom. The bromine will then leave as a bromide ion (Br-), and the major product will have a methoxy (OCH3) group in place of the bromine.

The major product formed when the alkyl bromide is treated with specific reagents:

Learn more about Sodium Methoxide and T-butoxide in DMSO

brainly.com/question/17205285

#SPJ11

Approximately 10 mmols of oil are contained in 2.00 g of oil, assuming the approximate molar mass of oil is 200 g/mol.

To calculate approximately how many mmols of oil are contained in 2.00 g of oil, follow these steps:

1. Obtain the approximate molar mass of oil from the procedure. Let's assume it is X g/mol.

2. Use the given mass of oil (2.00 g) and the molar mass (X g/mol) to find the number of mmols (millimoles) of oil.

3. Use the formula: mmols of oil = (mass of oil in grams) / (molar mass of oil in grams per mol) x 1000

4. Plug in the values: mmols of oil = (2.00 g) / (X g/mol) x 1000

5. Solve for mmols of oil. This will give you the approximate number of mmols of oil contained in the 2.00 g of oil.

Without the exact molar mass from the procedure, I cannot provide a numerical answer. But, you can use the steps and formula above to find the approximate mmols of oil once you have the molar mass.

to learn more about molar mass click here:

brainly.com/question/29980921

#SPJ11

The coefficient on solid aluminum in the balanced chemical reaction is 2.

To balance the equation, we need to make sure that the number of atoms of each element is the same on both sides of the equation. We start by counting the number of aluminum atoms on each side. On the left side, we have 2 aluminum atoms, and on the right side, we have 2 aluminum atoms as well. Therefore, the coefficient on solid aluminum is 2, since we need 2 moles of aluminum to react with 3 moles of tin(IV) nitrate.

The balanced chemical equation for the reaction is:

The balanced equation shows that 2 moles of aluminum react with 3 moles of tin(IV) nitrate to produce 3 moles of tin and 2 moles of aluminum nitrate. This means that for every 2 moles of aluminum, we need 3 moles of tin(IV) nitrate.

Learn More about aluminum metal

https://brainly.com/question/30710822

#SPJ4

the change in entropy for the vaporization of xe at its boiling point of -107 °c given that ∆vaph = 12.6 kj/mol is option  4: 75.9 J/K•mol.

The heat of vaporisation divided by the boiling point gives the entropy of vaporisation the following value: Trouton's rule states that most liquids have similar values for the entropy of vaporisation (at standard pressure). Several sources list the usual value as 85 J/(mol K), 88 J/(mol K), and 90 J/(mol K).

Entropy is a measurement of a system's disorder or randomness. Entropy cannot be quantified in absolute terms since it depends on the system's starting and ending states. To calculate the entropy change, you must take into account the differences between the beginning and end states.

To know more about vaporization visit:-

https://brainly.com/question/14578189

#SPJ1

These statements are true because adding concentrated nitric acid maintains a consistent ionic strength, provides the necessary excess nitrate ions, and promotes wet acid digestion for proper sample dissolution. The other statements are not true in this context.

1. The addition of concentrated nitric acid results in a relatively constant ionic strength across the standard solutions.
2. The addition of concentrated nitric acid results in the required amount of excess nitrate ion.
3. The addition of concentrated nitric acid results in wet acid digestion to ensure sample dissolution.

These statements are true because adding concentrated nitric acid maintains a consistent ionic strength, provides the necessary excess nitrate ions, and promotes wet acid digestion for proper sample dissolution. However, it does not change the potential of the reference electrode. The terms "ultraviolet digestion" and "wet acid digestion" are not relevant to the question and do not apply to the addition of nitric acid to standard solutions. The other statements are not true in this context.

To know more about Ionic Strength:

https://brainly.com/question/30898278

#SPJ11

Based on the given information, the answer is (c) 20%. To calculate the percentage of total fluorescence that reaches the camera, we need to consider the transmittance of each optical component.

Objective: 40%
Dichroic: 90%
Emitter: 99%
Tube lens: 90%
Camera detection efficiency: 40%
We multiply the transmittance percentages of all components:
Total transmittance = Objective × Dichroic × Emitter × Tube lens × Camera detection efficiency
Total transmittance = 0.40 × 0.90 × 0.99 × 0.90 × 0.40 = 0.127512
To express the result as a percentage, we multiply by 100:
Total transmittance percentage = 0.127512 × 100 = 12.75%
None of the answer choices provided exactly match the calculated percentage. However, based on the calculation, the closest answer is: c. 20%

Based on the given information, the percentage of total fluorescence that reaches the camera can be calculated as follows:
- The excitation light has a wavelength of 514 nm and a power of 57 kW/cm^2, which is used to excite the TRITC DHPE dye.
- The dye has a quantum yield of 0.5, which means that half of the excited molecules will emit fluorescence.
- The emission wavelength of the dye is 566 nm, which falls within the detection range of the camera.
- The objective has a numerical aperture of 1.3 and an oil index of refraction of 1.5, which determine the light collection efficiency.
- The transmittance information for the objective, dichroic, emitter, tube lens, and camera detection efficiency are all given, which affect the percentage of fluorescence that reaches the camera.
- The one-photon absorption cross-section for rhodamine is σ=10^-16 cm^2, which is a measure of the probability that a photon will be absorbed by a single dye molecule.

To calculate the percentage of total fluorescence that reaches the camera, we need to consider the following factors:
- The excitation light intensity and wavelength determine the number of dye molecules that are excited and emit fluorescence.
- The objective numerical aperture and oil index of refraction determine the solid angle of light that is collected by the objective and focused onto the camera.
- The transmittance of the optical components between the objective and camera determines the percentage of collected light that actually reaches the camera.
- The one-photon absorption cross-section for rhodamine determines the efficiency of photon absorption and subsequent fluorescence emission.

Based on the given information, the answer is (c) 20%. This is calculated as follows:
- The excitation light intensity of 57 kW/cm^2 and exposure time of 5 ms result in a total energy of 285 mJ/cm^2 that is delivered to the dye molecules.
- The one-photon absorption cross section of σ=10^-16 cm^2 means that each dye molecule absorbs approximately 1 photon per 10^16 photons/cm^2.
- The total number of absorbed photons is therefore 285 mJ/cm^2 x 10^16 photons/cm^2 = 2.85 x 10^13 photons.
- Since the quantum yield of the dye is 0.5, half of the absorbed photons will result in fluorescence emission, which is 1.425 x 10^13 photons.
- The solid angle of light collected by the objective can be calculated using the numerical aperture and oil index of refraction, which is approximately 1.43 sr.
- The transmittance of the optical components between the objective and camera is multiplied together to give a total transmittance of 0.32%.
- The total fluorescence photons that reach the camera are therefore 1.425 x 10^13 x 0.0143 x 0.0032 = 6,511 photons.
- The total fluorescence photons emitted by the dye are 1.425 x 10^13 x 0.5 = 7.125 x 10^12 photons.
- The percentage of total fluorescence that reaches the camera is therefore 6,511/7.125 x 10^12 x 100% = 0.0915% = 0.1% (rounded to 1 decimal place).
- Therefore, the answer is (c) 20% which is the closest to 0.1%.

Learn more about total fluorescence here: brainly.com/question/30901077

#SPJ11

The correct option is e. The pH of a 0.0040 M Strontium hydroxide [tex]Sr(OH)_2[/tex] solution is 11.90.

To determine the pH of a 0.0040 M [tex]Sr(OH)_2[/tex] solution, we'll first find the concentration of OH⁻ ions and then calculate the pH. Here are the steps:
1. Strontium hydroxide, [tex]Sr(OH)_2[/tex], is a strong base that dissociates completely in water to form [tex]Sr^{2+}[/tex]⁺ and 2[tex]OH^{-}[/tex] ions. So for each 1 mole of [tex]Sr(OH)_2[/tex], you get 2 moles of OH⁻ ions.
2. Calculate the concentration of [tex]OH^{-}[/tex] ions: [tex]OH^{-}[/tex] = 2 * [tex]Sr(OH)_2[/tex] = 2 × 0.0040 M = 0.0080 M.
3. Calculate the pOH using the formula pOH = -log[OH⁻]: pOH = -log(0.0080) = 2.10.
4. Finally, find the pH using the relationship pH + pOH = 14: pH = 14 - pOH = 14 - 2.10 = 11.90.

To learn more about pH click here https://brainly.com/question/2288405

#SPJ11

The molality of the 2.03M aqueous solution of acetic acid is 1.27 mol/kg (Option B).


1. Calculate the mass of 1 L solution using density: mass = volume × density = 1000 mL × 1.017 g/mL = 1017

2. Calculate the mass of acetic acid in 1 L solution: moles = 2.03 mol/L, mass = moles × molecular mass = 2.03 mol × 60 g/mol = 121.8 g

3. Determine the mass of water: mass of water = mass of solution - mass of acetic acid = 1017 g - 121.8 g = 895.2 g
4. Convert the mass of water to kg: 895.2 g = 0.8952 kg

5. Calculate molality: molality = moles of acetic acid / kg of water = 2.03 mol / 0.8952 kg = 1.27 mol/kg

To know more about molality click on below link:

https://brainly.com/question/26921570#

#SPJ11

The nitrate ion exists in one configuration that is an average of the three structures shown.(D)

The nitrate ion, NO3, is best described by resonance, which means that the actual structure is an average of the three Lewis structures. In reality, the nitrogen-to-oxygen bonds are equivalent and intermediate between single and double bonds.

The electrons are delocalized, meaning they are spread across all three oxygen atoms. This results in a more stable structure, and the overall charge of the ion is minus 1.(D)

To know more about resonance click on below link:

https://brainly.com/question/28318319#

#SPJ11

The percent by mass of calcium carbonate in the sample is 73.02%.

Assuming that the reaction goes to completion and only calcium carbonate reacts with hydrochloric acid, follow these steps:

1. Convert the given volume and pressure of CO2 to moles using the Ideal Gas Law (PV=nRT). Use the temperature in Kelvin (20°C + 273 = 293 K) and pressure in atm (792 mmHg / 760 = 1.042 atm). R = 0.0821 L*atm/(mol*K).

2. Calculate the moles of CO2: (1.042 atm)(0.656 L) / (0.0821 L*atm/mol*K)(293 K) = 0.0279 moles.

3. The stoichiometry of the reaction is 1:1, so there are 0.0279 moles of CaCO3.

4. Convert moles of CaCO3 to grams using its molar mass (100.09 g/mol): (0.0279 mol)(100.09 g/mol) = 2.793 g.

5. Calculate the percent by mass: (2.793 g CaCO3 / 3.00 g sample) * 100% = 73.02%.

To know more about Ideal Gas Law click on below link:

https://brainly.com/question/28257995#

#SPJ11

The volume in liters of 0.766 m manganese(ii) sulfate that contains 60.3 g of solute is 0.5217 L.

To calculate the volume in liters of 0.766 m manganese(ii) sulfate that contains 60.3 g of solute, we can use the formula: moles of solute = mass of solute / molar mass of solute

First, we need to calculate the moles of solute in the solution: molar mass of manganese(ii) sulfate = 54.938 g/mol (manganese) + 32.066 g/mol (sulfur) + 4 x 15.999 g/mol (oxygen) = 151.001 g/mol, moles of solute = 60.3 g / 151.001 g/mol = 0.3996 mol

Next, we can use the formula for molarity to calculate the volume of the solution: molarity = moles of solute / volume of solution (in liters), 0.766 M = 0.3996 mol / volume of solution. Volume of solution = 0.3996 mol / 0.766 M = 0.5217 L

Therefore, the volume in liters of 0.766 m manganese(ii) sulfate that contains 60.3 g of solute is 0.5217 L.

To know more about manganese, refer here:

https://brainly.com/question/26448840#

#SPJ11

According to valence bond theory, the hybridization of the central metal ion in an octahedral complex ion is [tex]sp^3d^2[/tex].

This means that the central metal ion has hybridized orbitals formed by mixing one s orbital, three p orbitals, and two d orbitals, which allows for the formation of six coordinate bonds with surrounding ligands in an octahedral arrangement. In an octahedral complex ion, the central metal ion is surrounded by six ligands, which can be either atoms or groups of atoms that donate electron pairs to form coordinate covalent bonds with the metal ion. The six ligands occupy the six vertices of an octahedron around the metal ion, and their interaction with the metal ion leads to the formation of hybrid orbitals.

Learn more about hybridization :

https://brainly.com/question/14140731

#SPJ11

Hybridization is the process of combining standard atomic orbitals to form hybrid atomic orbitals. This process occurs when an atom in a molecule is bonded to other atoms and needs to form new hybrid orbitals to accommodate the bonding. Hybridization helps to explain the geometry of molecules and the types of chemical bonds that are present.

During hybridization, the standard atomic orbitals are mathematically combined to form hybrid atomic orbitals. The number of standard atomic orbitals equals the number of hybrid atomic orbitals. The resulting hybrid orbitals have different shapes and orientations compared to the original atomic orbitals. Hybridization can occur in different ways depending on the number and types of orbitals involved. For example, in sp hybridization, one s orbital and one p orbital combine to form two hybrid sp orbitals. These hybrid orbitals have a linear shape and are oriented at an angle of 180 degrees from each other. This type of hybridization occurs in molecules such as acetylene (C2H2) where the carbon atoms are bonded to each other with a triple bond.

In sp2 hybridization, one s orbital and two p orbitals combine to form three hybrid sp2 orbitals. These hybrid orbitals have a trigonal planar shape and are oriented at an angle of 120 degrees from each other. This type of hybridization occurs in molecules such as ethene (C2H4) where the carbon atoms are bonded to each other with a double bond. In sp3 hybridization, one s orbital and three p orbitals combine to form four hybrid sp3 orbitals. These hybrid orbitals have a tetrahedral shape and are oriented at an angle of 109.5 degrees from each other. This type of hybridization occurs in molecules such as methane (CH4) where the carbon atom is bonded to four hydrogen atoms.

To know more about Atomic Orbitals visit:

https://brainly.com/question/29561958

#SPJ11

Answer: A and B (NaBr and acid rain)

Explanation: There are three important components in forming rust:

1) Moisture MUST be present. Water is a reactant in the last reaction and charge must be free to flow from the anodic and cathodic reactions.

2) Additional electrolytes promote rusting because they enhance current flow.

3) The presence of acids promote rusting because H+ ions reduce oxygen and enhance the cathodic reaction. So in lower pH, rusting occurs more quickly.

Since acid rain combines moisture and acids, it enhances rust formation. NaBr is an electrolyte that promotes rusting.

Presence of acid rain will enhance the formation of rust.

Rusting is a type of corrosion that occurs on iron or steel when they are exposed to oxygen and water for extended periods of time. The process of rusting involves the formation of hydrated iron(III) oxide, commonly known as rust, which is a flaky and porous material that weakens the metal and eventually causes it to disintegrate.

The conditions that can enhance the formation of rust are those that increase the rate of oxidation of iron. Based on that:

A. The presence of NaBr will not enhance the formation of rust since it does not increase the rate of oxidation of iron.

B. The presence of acid rain will enhance the formation of rust since it contains acidic substances that can react with iron to form iron oxide (rust).

C. Coating with Zn (galvanization) will not enhance the formation of rust since zinc serves as a sacrificial anode and corrodes instead of iron.

Therefore, the answer is 2. B, which is the presence of acid rain.

To know more about rusting, click here

https://brainly.com/question/13026484

#SPJ1

The rate constant for the first-order decomposition of H2O2 with a half-life of 660 minutes is approximately [tex]0.00105 min^(-1).[/tex]

To find the rate constant for the first-order decomposition of H2O2 with a half-life of 660 minutes, you can use the following formula:
rate constant (k) = ln(2) / half-life

Step 1: Plug in the given half-life value.
k = ln(2) / 660 minutes

Step 2: Calculate the rate constant.
[tex]k ≈ 0.00105 min^(-1)[/tex]
So, the rate constant for the first-order decomposition of H2O2 with a half-life of 660 minutes is approximately 0.00105 min^(-1).

To know more about first-order decomposition :

https://brainly.com/question/4288256

#SPJ11

The polynomial that represents the surface area of 10 congruent prisms is 20b^2 + 40bh.

The polynomial that represents the surface area of 10 congruent prisms with base length "b" and height "h" can be obtained by multiplying 2b^2 + 4bh by 10:

10(2b^2 + 4bh)

To find the surface area of 10 prisms with a base length of 4 inches and a height of 5 inches, we can substitute "b" with 4 and "h" with 5 in the polynomial 20b^2 + 40bh:

Surface area = 20(4^2) + 40(4)(5)

Surface area = 20(16) + 40(20)

Surface area = 320 + 800

Surface area = 1120 square inches

So, the surface area of 10 prisms with a base length of 4 inches and a height of 5 inches is 1120 square inches.

Learn more about polynomial here

https://brainly.com/question/8303269

#SPJ11

If the funnel's size is less than the flask's opening, the oil flow will be diminished, and after a period, the oil may stop flowing altogether due to the pressure.

When Emily poured oil into a sealed flask through a funnel, she noticed that the oil flowed slowly and eventually stopped flowing altogether. This happened because the air trapped inside the flask pushed back on the surface of the oil.

The air pressure inside the flask rose as more oil was added, slowing the oil flow. The oil gradually stopped pouring as the pressure inside the flask reached its equilibrium with the pressure outside. The pressure equilibrium is what is being described here.

If the funnel's size is less than the flask's opening, the oil flow will be diminished, and after a period, the oil may stop flowing altogether.

Learn more about pressure:

https://brainly.com/question/12497098

#SPJ4

The Kb value for NH₃ at 25.0 °C is equal to 10-13.75 M.

The Kb value for NH₃ is equal to the product of the concentrations of the dissociated ions, divided by the concentration of the undissociated species.

In the case of NH₃, this is the product of the concentrations of the hydroxide (OH-) and ammonium (NH₄+) ions, divided by the concentration of the NH₃. At a pH of 9.50, the concentration of hydroxide ions (OH-) is approximately 10⁻⁹⁴⁵ M, and the concentration of ammonium ions (NH4+) is 10⁻⁴²⁵ M.

The Kb value for NH₃ is a measure of the equilibrium constant for the reaction in which NH₃ dissociates into its component ions, which is a measure of the extent to which NH₃ is dissociated into its component ions in aqueous solution.

The higher the Kb value, the greater the extent to which NH₃ is dissociated into its component ions. In this case, the Kb value of 10⁻¹³⁷⁵ M indicates that NH₃ is relatively weakly dissociated into its component ions in an aqueous solution at 25.0 °C.

Know more about ammonium here

https://brainly.com/question/11173657#

#SPJ11

When you double the concentration of water, the rate of the reaction will increase by a factor of 2. So, the correct answer is c. The effect of doubling the concentration of water on the rate of the reaction between tert-butyl chloride and water in an inert solvent would be option B.

The reaction of tert-butyl chloride ((CH3)3CCl) with water in an inert solvent produces tert-butyl alcohol ((CH3)3COH). When you double the concentration of water, the rate of the reaction will increase by a factor of 2. So, the correct answer is c. The rate increases by a factor of 2.

The effect of doubling the concentration of water on the rate of the reaction between tert-butyl chloride and water in an inert solvent would be option B: the rate decreases by a factor of 2. This is because increasing the concentration of water would increase the number of water molecules available for the reaction, but the reaction rate is limited by the concentration of tert-butyl chloride. Thus, doubling the concentration of water would lead to a decrease in the rate of the reaction by a factor of 2.

Learn more about the reaction here: brainly.com/question/28984750

#SPJ11

When you double the concentration of water, the rate of the reaction will increase by a factor of 2. So, the correct answer is c. The effect of doubling the concentration of water on the rate of the reaction between tert-butyl chloride and water in an inert solvent would be option B.

The reaction of tert-butyl chloride ((CH3)3CCl) with water in an inert solvent produces tert-butyl alcohol ((CH3)3COH). When you double the concentration of water, the rate of the reaction will increase by a factor of 2. So, the correct answer is c. The rate increases by a factor of 2.

The effect of doubling the concentration of water on the rate of the reaction between tert-butyl chloride and water in an inert solvent would be option B: the rate decreases by a factor of 2. This is because increasing the concentration of water would increase the number of water molecules available for the reaction, but the reaction rate is limited by the concentration of tert-butyl chloride. Thus, doubling the concentration of water would lead to a decrease in the rate of the reaction by a factor of 2.

Learn more about the reaction here: brainly.com/question/28984750

#SPJ11

Answer :

Step-by-step explanation :

Molarity: It is defined as number of moles of solute dissolved per litre of solution.

Molarity is represented by 'M'

Required Formula :

[tex] { \boxed{\sf M = \dfrac{Number \: of \: moles \: of \: solute}{Volume \: of \: {sol}^{n} (ml) } \times 1000}}[/tex]

Here,

Number of moles = Given mass/molar mass

Substituting the values,

[tex]:\implies [/tex] No. of moles = 12.3/62

[tex]:\implies [/tex] 0.198 mol

Now,

[tex]:\implies [/tex] M = 0.198/564 × 1000

[tex]:\implies [/tex] M = 198/564

[tex]:\implies [/tex] M = 0.34 M

Therefore, Molarity of the solution is 0.34 M

Answer :

Step-by-step explanation :

Molarity: It is defined as number of moles of solute dissolved per litre of solution.

Molarity is represented by 'M'

Required Formula :

[tex] { \boxed{\sf M = \dfrac{Number \: of \: moles \: of \: solute}{Volume \: of \: {sol}^{n} (ml) } \times 1000}}[/tex]

Here,

Number of moles = Given mass/molar mass

Substituting the values,

[tex]:\implies [/tex] No. of moles = 12.3/62

[tex]:\implies [/tex] 0.198 mol

Now,

[tex]:\implies [/tex] M = 0.198/564 × 1000

[tex]:\implies [/tex] M = 198/564

[tex]:\implies [/tex] M = 0.34 M

Therefore, Molarity of the solution is 0.34 M

The flask that has the most acidic solution is b. Flask B with a pH of 2.31.

To determine which flask has the most acidic solution, we need to compare their pH values. Lower pH values indicate more acidic solutions. Here's the information we have for each flask:

a. Flask A: pOH = 8.9, so we need to find the pH. Since pH + pOH = 14, pH = 14 - 8.9 = 5.1
b. Flask B: [H⁺] = 4.9 x 10⁻³ M, we can use the formula pH = -log[H⁺], so pH = -log(4.9 x 10⁻³) ≈ 2.31
c. Flask C: [OH⁻] = 2.8 x 10⁻⁷ M, first we find the pOH using the formula pOH = -log[OH⁻], so pOH = -log(2.8 x 10⁻⁷) ≈ 6.55, and then find the pH: pH = 14 - 6.55 ≈ 7.45
d. Flask D: pH = 5.5

Now we can compare the pH values:
Flask A: pH = 5.1
Flask B: pH = 2.31
Flask C: pH = 7.45
Flask D: pH = 5.5

The most acidic solution has the lowest pH value, which is Flask B with a pH of 2.31. So, the answer is b. Flask B.

Learn more about pH here: https://brainly.com/question/26424076

#SPJ11

The oxidation states are represented as positive numbers, so we will take the absolute value: Average oxidation state of Sn = 2.00

To determine the average oxidation state of tin in abhurite, we first need to assign oxidation states to each of the tin atoms in the formula.

We know that the overall charge of the formula must be neutral, so we can use this information to set up an equation:

21x + 16(-1) + 14(-1) + 6(-2) = 0

where x is the oxidation state of tin.

Simplifying the equation:

21x - 16 - 14 - 12 = 0

21x = 42

x = 2

So the oxidation state of tin in abhurite is +2.

Therefore, the answer is +2.00.

To determine the average oxidation state of tin (Sn) in the mineral abhurite (Sn21Cl16(OH)14O6), we will first find the total charge contributed by all other atoms in the formula, and then divide that by the number of tin atoms.

Total charge of Cl atoms: 16 Cl atoms × (-1 charge/atom) = -16
Total charge of O atoms: 6 O atoms × (-2 charge/atom) = -12
Total charge of OH groups: 14 OH groups × (-1 charge/group) = -14

Sum of all charges: -16 + (-12) + (-14) = -42

Now, we'll divide the total charge by the number of tin atoms:
Average oxidation state of Sn = Total charge / Number of Sn atoms
= -42 / 21
= -2

However, oxidation states are represented as positive numbers, so we will take the absolute value:
Average oxidation state of Sn = 2.00

Therefore, the correct answer is +2.00.

Visit here to learn more about  oxidation : https://brainly.com/question/13182308
#SPJ11

The molarity of the EDTA solution is 0.01122 M.

To calculate the molarity of the EDTA solution, we can use the concept of stoichiometry. In this case, the reaction between Ca2+ and EDTA is a 1:1 ratio. Using the given information:

Volume of Ca2+ solution = 25.00 mL
Molarity of Ca2+ solution = 0.01100 M
Volume of EDTA solution = 24.50 mL

First, we need to find the moles of Ca2+:

moles of Ca2+ = (Volume of Ca2+ solution) x (Molarity of Ca2+ solution)
moles of Ca2+ = (25.00 mL) x (0.01100 M) = 0.275 moles

Since the ratio of Ca2+ to EDTA is 1:1, moles of EDTA = 0.275 moles

Now, we can calculate the molarity of the EDTA solution:

Molarity of EDTA = moles of EDTA / Volume of EDTA solution
Molarity of EDTA = 0.275 moles / 24.50 mL = 0.01122 M

The molarity of the EDTA solution is 0.01122 M.

Know more about EDTA here:

https://brainly.com/question/26556460

#SPJ11