layers allow you to work with one element of an image without disturbing the others true or false​

Answers

Answer 1

I think it is True not sure but try it


Related Questions

There used to be a popular type of pulp book for younger readers. They were called "Choose Your Own Adventure" novels. The idea was pretty simple. You'd start reading and then a few pages into the book, there would be a plot development that required a choice. The book might describe that you've entered a spooky house and the door has locked behind you. It would then ask you if you want to try to exit by going through the kitchen or exploring upstairs. If you chose to go into the kitchen, you'd turn to page 200, if you chose to go upstairs, you'd turn to page 43. This would repeat maybe five or six times though the book. You could re-read it a few times and try different outcomes.
In this lab you are going to create a choose your own adventure application using navigation controllers. The introduction screen to your application will contain a few lines of text to set up a story and then leave the user with a choice. Below the text, you will present two buttons that correspond to the different choices.
For example, you might see the following text on the main screen:
You are walking down the street when a tiger runs up and takes your lunch and then runs away...
Do you want to chase the tiger or run away?
Chase
Run Away
The user must then tap one of the buttons. This will move the user to a new screen with a few more lines of the story and another choice and two more buttons. You will create three (3) turning points in your story. This means that your story will have eight (8) different possible outcomes and a total of 15 screens.
Requirements
The story must ask three (3) questions, no matter how the user answers the previous question. All the questions must be different and result in a different story text.
The story must have eight (8) possible different final outcomes.
The story must include a minimum of 15 screens in total.
Create content that is appropriate and not-offensive. We will share these and play them together.
For extra credit you can add an extra screen and use inputs to capture data from the user such as a name, favorite food, or lucky number and use this data in the story.

Answers

Answer:

click on the link

Explanation:

link is somewhere hidden

a) Why is eavesdropping done in a network?
b) Solve the following using checksum and check the data at the
receiver:
01001101
00101000​

Answers

Answer:

An eavesdropping attack is the theft of information from a smartphone or other device while the user is sending or receiving data over a network.

Missing: checksum ‎01001101 ‎00101000

Describe a cellular network, its principal components, and how it works.

Answers

Answer:

The final basic component of a cellular system is the Gateway. The gateway is the communication links between two wireless systems or between wireless and wired systems. There are two logical components inside the Gateway: mobile switching center (MSC) and interworking function (IWF).

Explanation:

Type the correct answer in the box. Spell all words correctly.
John wants to use graphical elements on his web page. Which image formats should he use to keep the file size manageable?
John should use
formats to keep the file size manageable.

Answers

Answer:

PNG, GIF

Explanation:

list the main industries in Sierra Leone​

Answers

Answer:

The main industries in Sierra Leone are: Diamond mining

Petroleum refining

Small - scale manufacturing (beverage, textiles,footwear)

Explanation:

They also engage in commercial ship repair

The EDI ____________layer describes the business application that i
driving EDI
a)EDI Semantic Layer c) EDI Transport Layer
b) EDI Standard Translation Layer d) Physical Layer

Answers

Answer:

a) EDI Semantic Layer

Explanation:

EDI is an acronym for electronic data interchange and it can be defined as a form of communication between interconnected computer systems and software applications with respect to business informations in standard digital formats.

This ultimately implies that, electronic data interchange (EDI) involves the transfer of business informations such as financial transactions between the computer systems of various organizations such as banks, companies, governmental agencies, etc. Thus, it avails businesses the ability to create strategic communications using computer to computer links to effectively and efficiently exchange business informations electronically or in digital formats.

Hence, the EDI Semantic layer describes the business application that is driving electronic data interchange (EDI).

A line beginning with a # will be transmitted to the programmer’s social media feed.

A.
True

B.
False

Answers

Answer:

True?

Explanation:

Answer:

The answer is false.

Explanation:

A “#” doesn’t do that in Python.

g Write a function called chain_words(str) which takes in one parameter which is a string that holds multiple words separated by spaces. Your function should return a string with the words chained together with an - (hyphen). You can first split the words at spaces and then join the words with - (hyphen). You can achieve this by using split and join methods respectively.

Answers

Answer:

Explanation:

The following is written in Python. The function takes in a string as a parameter. It then sperates the string at every space. Then it rejoins the list of strings with hyphens. Finally, returning the newly created string with hyphens.

def chain_words(str):

   string_split = str.split(" ")

   seperator = '-'

   hyphen_string = seperator.join(string_split)

   return hyphen_string

Write a program whose input is a character and a string, and whose output indicates the number of times the character appears in the string. The output should include the input character and use the plural form, n's, if the number of times the characters appears is not exactly 1. g

Answers

Answer:

The program in Python is as follows:

string = input("String: ")

chr = input("Character: ")[0]

total_count = string.count(chr)

print(total_count,end=" ")

if total_count > 1:

   print(chr+"'s")

else:

   print(chr)

Explanation:

This gets the string from the user

string = input("String: ")

This gets the character from the user

chr = input("Character: ")[0]

This counts the occurrence of the character in the string

total_count = string.count(chr)

This prints the total count of characters

print(total_count,end=" ")

If the count is greater than 1

if total_count > 1:

Then it prints a plural form

   print(chr+"'s")

If otherwise

else:

Then it prints a singular form

   print(chr)

True or false question :)

Handware can be tracked back to ancient times. Over six centuries ago.
°true
°false

Answers

Answer:

false and it's a recent technology

i would say the answer is false!

calculate the total and average number from 1 to 100

Answers

Answer:

Thus, 50.5 is an average of numbers from 1 to 100.

Explanation:

getcalc.com's average calculator to find what is the mean or average of natural numbers upto 100.

50.5 is an average of numbers from 1 to 100 mentioned in the below table, by substituting the total sum and count of numbers in the below formula. The corresponding formulas, chart, examples & workout may help students, teachers or professionals to learn, teach or practice the average of natural numbers upto 100.

Address the formula, input parameters & values.

Formula: Average = Total Sum of Numbers / Total Count of Numbers

Input parameters & values:

The numbers from 1 to 100 are

1, 2, 3, 4, . . . . , 98, 99, 100

Total Count of Numbers = 100

step 2 Find the sum of numbers from 1 to 100.

sum = 1 + 2 + 3 + . . . . + 99 + 100

= 5050

step 3 Divide the sum by 100 Average = 5050/100 = 50.5

Thus, 50.5 is an average of numbers from 1 to 100.

What symbol next to the records indicates that a table includes a subdatasheet? an asterisk a plus sign a question mark an exclamation point

Answers

Answer: a plus sign

Explanation: I just did the assignment and got it right

Answer:

B)A plus sign

Explanation:

B)A plus sign just finished assignment

You are an IT network administrator at XYZ Limited. Your company has critical applications running of its Ubuntu Linux server. Canonical, the company that owns and maintains Ubuntu just releases an update to patch a security vulnerability in the system.

Required:
What BEST action you should take?

Answers

Answer:

Explanation:

I believe that the best course of action would be to divide the companies computers and run the critical applications on half of the systems while the other half update to the latest Ubuntu release. Once that half is done updating, you run the applications on the updated systems and update the other half of the systems. This will allow the company to continue its operations without any downtime, while also updating to the latest Ubuntu release on all systems and making sure that all systems do not have any security vulnerabilities due to outdated software.

recent trends on operating system

Answers

Answer:

Windows 10 if this is what I think u mean

Viruses and Malware Complete the case project on page 82 of the textbook by researching two types of viruses, two types of malware, and two types of denial of service attacks using the internet or any other type of resource available to you. Next, write at least a two page paper in current APA format that lists each of the researched items, how they are used to attack a system or network, and what types of defenses can be put in place to protect against those attacks. Find an article which describes the compromise of a company organization through a virus or malware. Write a one page paper in APA format summarizing the security incident and how it was resolved or what actions could have been taken to prevent it.

Answers

Hi, I provided you a general guide on how to go about your writing your research paper.

Explanation:

Note, the current APA (American Psychological Association) format is the APA 7th Edition. This format details how a researcher should state the findings, sources, conclusion, etc.

Hence, you can begin writing the assigned paper only after gathering the needed data.

17. What are the basic modes of operation of 8255?Write the features of mode 0 in 8255?

Answers

Answer:

There are two basic operational modes of 8255:

Bit Set/Reset mode (BSR mode).

Input/Output mode (I/O mode).

Features of 8255 Microprocessor:

Mode 0 : Simple Input/Output.

Mode 1 : Input/Output with handshake.

Mode 2 : Bi-directional I/O data transfer.

It has three 8-bit ports : Port A, Port B, and Port C, which are arranged in two groups of 12 pins.

The 8255 can operate in 3 I/O modes : (i) Mode 0, (ii) Mode 1, & (iii) Mode 2.

How can presentation software be used in a
business or professional setting? Choose all that
apply.
to automate the ticket-purchasing process at
movie theaters through a kiosk
to teach lessons to high school students
to deliver a sales presentation to clients
to create charts and graphs from a table of
values
to compose letters and memos
DONE

Answers

Answer:

To automate the ticket purchasing process at the movie theaters through a kiosk

To teach lessons to high school students

To deliver a sales presentation to clients

Explanation:

I just used the answers above and got 2/3 wrong and edge said so

Write a program that randomly (using the random number generator) picks gift card winners from a list of customers (every customer has a numeric ID) who completed a survey. After the winning numbers are picked, customers can check if they are one of the gift card winners. In your main function, declare an integer array of size 10 to hold the winning customer IDs (10 winners are picked). Pass the array or other variables as needed to the functions you write. For each step below, decide what arguments need to be passed to the function. Then add a function prototype before the main function, a function call in the main function and the function definition after the main function.

Answers

Answer:

Explanation:

Since no customer ID information was provided, after a quick online search I found a similar problem which indicates that the ID's are three digit numbers between 100 and 999. Therefore, the Java code I created randomly selects 10 three digit numbers IDs and places them in an array of winners which is later printed to the screen. I have created an interface, main method call, and method definition as requested. The picture attached below shows the output.

import java.util.Random;

interface generateWinner {

   public int[] winners();

}

class Brainly implements generateWinner{

   public static void main(String[] args) {

       Brainly brainly = new Brainly();

       int[] winners = brainly.winners();

       System.out.print("Winners: ");

       for (int x:winners) {

           System.out.print(x + ", ");

       }

   }

   public int[] winners() {

       Random ran = new Random();

       int[] arr = new int[10];

       for (int x = 0; x < arr.length; x++) {

           arr[x] = ran.nextInt(899) + 100;

       }

       return arr;

   }

}

8. Many organizations build their networks around this type of computer.
A) server
B) terminal
C) supercomputer
heir netwo
of multiple
or that stores data
A)dektop

Answers

it is B) terminal bc There are several different types of computer networks. Computer networks can be characterized by their size as well as their purpose

B is the answer because I looked it up

Which of the following statements is TRUE of a peer-to-peer network?
A. Different parties have very different opinions on what can and can’t be shared through a peer-to-peer network.
B. In a peer-to-peer network, all files being shared are kept on one server. Anyone who wants to access one of those files can get it directly from the server.
C. A peer-to-peer network can create heavy traffic and makes download times increase significantly.
D. Creating a directory of which computers have certain files is an acceptable practice.

Answers

Answer:

A. Different parties have very different opinions on what can and can’t be shared through a peer-to-peer network.

Explanation:
CORRECT
Choice 'A' is very true.
There have been many arguments and court cases over what content can and cannot be shared through a peer-to-peer network. Users of these networks often argue that free speech allows us to share whatever we want online. Content creators on the other hand frequently sue for copyright infringement.


INCORRECT
Choice 'B' is describing a centralized system, not a peer-to-peer network. In a peer-to-peer network, there is no central location of files. Files are transferred directly from one computer to another without a middleman.

Choice 'C' is also not true of peer-to-peer networks. These networks are actually much more efficient than centralized systems because there is no large server holding all the files. It takes less time to download files from a peer-to-peer network because there is no centralized source of information and files.

Choice 'D' is also false; this was decided in the court case about Napster, one of the first large peer-to-peer networks. Having a centralized directory of who has which files is not considered free speech.

The peer-to-peer network is said to have varying views that form the basis of what can and cannot be shared. Thus, option A is correct.

What is a peer-to-peer network?

A peer-to-peer network is given as the connection of the computers that are linked with the following same responsibilities and permissions.

The network is said to have varying views. Many debates and court cases have erupted over what content can and cannot be shared over a peer-to-peer network.

Users of these sites frequently argue that freedom of speech allows us to share whatever we want on the internet.On the other hand, content creators frequently file copyright infringement lawsuits.

Thus, option A is correct.

Learn more about peer-to-peer networks, here:

https://brainly.com/question/1172049

#SPJ2

How to make a project using PID and thermacouple

Answers

Explanation:

Required tools and components:

Soldering iron

Solder

Flux pen

Fine gauge solder (23 gauge or finer)

Wire cutter

MAX31855 thermocouple interface chip (available directly from Maxim Integrated)

Thermocouple with junction suitable for your application (e.g., probe, washer, etc.)

J-type (-40°C to +750°C)

K-type (-200°C to +1350°C)

T-type (-200°C to +350°C) Solid state relay (will depend on your application)

USB FTDI 5V cable (Note: A single cable can be used for many different microcontroller projects)

Computer with Arduino IDE v1.0

Wall-wart 9V/1.5A, 2.1mm center positive

which shortcut can we use to make directional heading of a cuboid more obvious while in the lidar view​

Answers

Answer:

cutting across

Explanation:

Why are iterators useful?

Select one:
a. Iterators prevent infinite loops
b. Iterators are easier to loop over than a while loop
c. Iterators walk down a collection faster than a for loop.
d. Iterators give you direct access to private variables.
e. Improve information hiding by not revealing how a collection class is implemented

Answers

It is d because I said it is

Given that
f(x) = 5x +3.
Find f (4)​

Answers

Answer:

Given that

f(x) = 5x +3.

f (4)=5×4+3=23

Explanation:

hope it's helps you have a good day☺

Using recursion, write a program that asks a user to enter the starting coordinates (row, then column), the ending coordinates (row then column), and calculates the number of paths from the starting coordinate to the ending coordinate.

Answers

Answer:

The program in Python is as follows

def Paths(row,col):

if row ==0 or col==0:

 return 1

return (Paths(row-1, col) + Paths(row, col-1))

row = int(input("Row: "))

col = int(input("Column: "))

print("Paths: ", Paths(row,col))

Explanation:

This defines the function

def Paths(row,col):

If row or column is 0, the function returns 1

if row ==0 or col==0:

 return 1

This calls the function recursively, as long as row and col are greater than 1

return (Paths(row-1, col) + Paths(row, col-1))

The main begins here

This prompts the user for rows

row = int(input("Row: "))

This prompts the user for columns

col = int(input("Column: "))

This calls the Paths function and prints the number of paths

print("Paths: ", Paths(row,col))

Write a program that prints the sum of the even numbers and the products of odd numbers on the screen

Answers

Answer:

The program in Python is as follows:

n = int(input("Number of inputs: "))

total = 0; product = 1

for i in range(n):

   num = int(input(": "))

   if num%2 == 0:

       total+=num

   else:

       product*=num

print("Sum of even: ",total)

print("Product of odd: ",product)

Explanation:

This prompts the user for the number of inputs, n

n = int(input("Number of inputs: "))

This initializes sum (total) to 0 and products to 1

total = 0; product = 1

This iterates through n

for i in range(n):

This gets the inputs

   num = int(input(": "))

If input is even, calculate the sum

   if num%2 == 0:

       total+=num

If otherwise, calculate the product

   else:

       product*=num

Print the required outputs

print("Sum of even: ",total)

print("Product of odd: ",product)

What is Requirement Engineering process explain with the help of diagram? Find the functional and non-functional requirements of the given case study.

An automatic ticket issuing system sells rail ticket. User select their destination and input a credit card and a personal identification number. The rail ticket is issued and their credit account charged. When the user presses the start button, a menu display of potential destinations is activated, along with a message to the user to select a destination. Once a destination has been selected, users are requested to input their card. Its validity is checked and user is then requested to input a personal identifier. When the credit transaction has been validated, the ticket is issued

Answers

functional requirement defines a system or its component whereas a non-functional requirement defines the performance attribute of a software system. ... Types of Non-functional requirement are Scalability Capacity, Availability, Reliability, Recoverability, Data Integrity, etc

Create a class named TriviaGameV1 that plays a simple trivia game. The game should have five questions. Each question has a corresponding answer and point value between 1 and 3 based on the difficulty of the question. TriviaGameV1 will use three arrays. An array of type String should be used for the questions. Another array of type String should be used to store the answers. An array of type int should be used for the point values. All three arrays should be declared to be of size 5. The index into the three arrays can be used to tie the question, answer, and point value together. For example, the item at index 0 for each array would correspond to question 1, answer 1, and the point value for question 1. Manually hardcode the five questions, answers, and point values in the constructor of TriviaGameV1. The five questions and their corresponding answers are shown on page 3. The point values should be set to 1, 2, 2, 3, 1, respectively.

The class should also provide the following two public methods:

• public boolean askNextQuestion() - This method takes no argument and returns a boolean. If there are no more questions to ask, it returns false. Otherwise, it asks the next question and gets an answer from the user. If the player’s answer matches the actual answer (case insensitive comparison), the player wins the number of points for that question. If the player’s answer is incorrect, the player wins no points for the question and the method will show the correct answer. It returns true after Q & A have been processed.
• public void showScore() - This method takes no argument and returns void. It displays the current score the player receives thus far.

The test driver is provided below, which creates a TriviaGameV1 object. After the player has answered all five questions, the game is over.

public class TriviaGameV1Test {
public static void main(String[] args) { TriviaGameV1 game = new TriviaGameV1();
while (game.askNextQuestion()) game.showScore(); System.out.println("Game over! Thanks for playing!"); }
}

Answers

Answer:

Explanation:

The following code is written in Java, It creates the class for the Trivia game along with the arrays, variables, and methods as requested so that it works flawlessly with the provided main method/test driver. The attached picture shows the output of the code.

import java.util.Arrays;

import java.util.Scanner;

class TriviaGameV1 {

   String[] questions = {"The first Pokemon that Ash receives from Professor Oak is?", "Erling Kagge skiied into here alone on January 7, 1993", "1997 British band that produced 'Tub Thumper'", "Who is the tallest person on record (8 ft. 11 in) that has lived?", "PT Barnum said \"This way to the _______\" to attract people to the exit."};

   String[] answers = {"pikachu", "south pole", "chumbawumba", "robert wadlow", "egress"};

   int[] points = { 1, 2, 2, 3, 1};

   int score;

   int count = 0;

  public void TriviaGameV1() {

       this.score = 0;

  }

  public boolean askNextQuestion() {

      if (count != 5) {

          Scanner in = new Scanner(System.in);

          System.out.println(questions[count]);

          String answer = in.nextLine().toLowerCase();

          if (answer.equals(answers[count])) {

              score += points[count];

          } else {

              System.out.println("Wrong, the correct answer is : " + answers[count]);

          }

          count += 1;

          return true;

      }

      return false;

  }

  public void showScore() {

      System.out.println("Your Score is: " + this.score);

  }

   public static void main(String[] args) {

      TriviaGameV1 game = new TriviaGameV1();

      while (game.askNextQuestion()) {

          game.showScore();

      }

      System.out.println("Game over! Thanks for playing!");

  }

}

Economic Batch Quantity depends on
دی ماه
Material, labour
Set-up costs, carrying
Transportation, carrying
Warehousing, labour​

Answers

Answer: Set-up costs, carrying costs

Explanation:

When it comes to production, the goal is to produce with as little costs as possible so that more profit can be made when the goods are sold.

This is why the Economic Batch Quantity is important. It shows the maximum amount of goods that can be produced in a particular production run such that costs will be minimized.

As such, it is based on the set-up costs of production for that run as well as the carrying costs through the run.

Your systems analysis team is close to completing a system for Azuka Theatre. Kevin is quite con- fident that the programs he has written for Azuka's inventory system used for keeping track of stage scenery and props will perform as required because they are similar to programs he has done before. Your team has been very busy and would ideally like to begin full systems testing as soon as possible. Mark and Allison, two of your junior team members have proposed the following:
a. Skip desk checking of the programs (because similar programs were checked in other installa- tions; Kevin has agreed).
b. Do link testing with large amounts of data to prove that the system will work.
c. Do full systems testing with large amounts of live data to show that the system is working. Respond to each of the three steps in their proposed test schedule. Use a paragraph to explain your response.

Answers

Answer:

a

Explanation:

im smart

Desk checking is a method to check the logic of an algorithm by manually working through it. There are many reasons for Desk Checking that may be omitted or simplified.

What are the reasons for desk checking?

If the current program’s logic is identical, then this step may be omitted; this, however, implies some effort to verify “sameness.” If truly identical, perhaps there is re-usable code, or the code to be developed should become a reusable library routine.

Link testing is the testing of the group of modules in order to ensure that the modules operate correctly in combination. It generally verifies that the function or operation is executed properly. System testing is a type of testing that is used to confirm the actual function of the system in which a work is executed or performed.

Therefore, all of the testing mechanisms are well described above.

To learn more about System and link testings, refer to the link:

https://brainly.com/question/7658665

#SPJ2

Other Questions
what did the kings daughter, medea, help jason with Read this heading and subheading from When Birds Get Flu.WHOS WHO? The Medical TeamBased on the passage and this heading and subheading, what do you predict this section is about?the different types of positions available in the medical fieldthe education necessary to be a part of the medical fieldthe reasons those on the medical team are studying bird fluthe people who make up the medical team studying bird flu translate this to spanish Pliss help meee plis no links The owner of a van installs a rear-window lens that has a focal length of -0.304 m. When the owner looks out through the lens at a person standing directly behind the van, the person appears to be just 0.237 m from the back of the van, and appears to be 0.343 m tall. (a) How far from the van is the person actually standing A thermal inversion rarely occurs in cities but is common in rural areas. rarely occurs in cities but is common in rural areas. helps remove pollutants from the atmosphere. helps remove pollutants from the atmosphere. leads to decreased amounts of ground-level smog. leads to decreased amounts of ground-level smog. occurs when a warm air layer overlies a cooler layer. occurs when a warm air layer overlies a cooler layer. occurs when a cool air layer overlies a warmer layer. In the first half of the basketball season, Jean made 15 free throws out of the 25 free throws she attempted, for a free-throw shooting percentage of 60%. How many consecutive free-throw shots would Jean have to make to raise her free-throw shooting percentage to 80%? help The questions are in the pic below ! How can you Divide the number 30 into 4 equal parts? Or can you? jdr-wivg-vmbco.me a.nd jo.in fa.st...go.ogle me.et In physics class, Carrie learns that a force, F, is equal to the mass of an object, m, times its acceleration, a. She writes the equation F=ma.Using this formula, what is the acceleration of an object with F=7.92 newtons and m=3.6 kilograms? Express your answer to the nearest tenth.Note: The unit for Force (the Newton) is measured in . Darnell is trying to understand the Pythagorean Theorem by drawing a few triangles. He found that 1 + 1 = (2) is accurate. Which statement is true about Darnells triangle?A. The triangle is not a right triangle because the lengths of its sides measure the same.B. The triangle is not a right triangle because the hypotenuse is shorter that the lengths of its sides.C. The triangle is a right triangle, the lengths of its sides are 1 and 2 with a hypotenuse of 1.D. The triangle is a right triangle, the lengths of its sides are 1 and 1 with a hypotenuse of 2.PLEASE HELP ASAP!!!! The pH of a solution with a Hydronium (H30+) ion concentration of 0.001M is A mixture of He, Ar, and Xe has a total pressure of 2.40 atm. The partial pressure of He is 0.300 atm, and the partial pressure of Ar is 0.250 atm. What is the partial pressure of Xe?Express your answer to three significant figures and include the appropriate units. After Brandon and Ghost fight Ghost feels like he has been treated unfairly. After a scenario of unjust consequences, how might someone with a growth mindset progress moving forward from this situation. qual a diferena entre contrareforma e reforma catolica Write the domain of Y= x+1/ (x+2)(x+10) An egret lives near cattle and eats insects stirred up by the cattle's grazing.a. Neitherb. Commensalism How did the rise in immigration affect Washington State? Check all that apply.English was the only language spoken in the state.The states population became less diverse.Immigrant groups created new neighborhoods.Immigrants brought their traditions to the state.New towns were established by immigrant groups. 5. What type of sound wave shape forms behind an object traveling faster than the speed of sound?- a cone- a long, flat tail- a bowl-shape- a sphere