missy just hired a software development team to create an educational simulation app for a high school course. she has specific requirements for how the app should respond to user actions. how can she communicate her specifications to the software developers?

Answer:

1) I'd invent a device that would diagnose a person's disease or illness immediately, and would suggest the best course of treatment for them, and would also tell where to procure the treatment, as well as how to administer it.

2) I'd invent a device that shows the best way to divide resources like water, food etc. among the people and how to preserve them for as long as possible.

that's all i can think of.

the missing lines with the required commands is ip nat inside source static 192.168.2.100 24.1.2.11.

What is IP address?

Any device on a network can be identified by its IP address, which stands for Internet Protocol. IP addresses are used by computers to connect with one another on different networks and the internet.

Private IP internetworks that employ unregistered IP addresses can connect to the Internet thanks to NAT. NAT runs on a device and typically joins two networks. The private (internal network addresses that are not globally unique) addresses are converted into lawful addresses by NAT before packets are sent into another network. NAT can be set up to only advertise one address to the outside world for the entire network. By effectively concealing the entire internal network behind that one address, this capability increases security.

A NAT-configured device has a minimum of two network interfaces: one to the internal network and one to the external network. NAT is typically set up between a stub domain and the backbone at the exit device. NAT converts the locally significant source address into a globally unique address when a packet leaves the domain.

NAT converts a packet's globally unique destination address into a local address as soon as it enters the domain. The translation table for each NAT must be the same if there are several exit points. If NAT is unable to assign an address because there are no more addresses available, it drops the message. Afterward, NAT transmits to the destination an Internet Control Message Protocol (ICMP) host unreachable packet.

Learn more about IP address click here:

https://brainly.com/question/27961221

#SPJ4

The full eagle logo, used in various versions from 1970 to 1993

The United States Postal Service (USPS), also known as the Post Office, U.S. Mail, or Postal Service, is an independent agency of the executive branch of the United States federal government responsible for providing postal service in the U.S., including its insular areas and associated states. It is one of the few government agencies explicitly authorized by the U.S. Constitution. The USPS, as of 2021, has 516,636 career employees and 136,531 non-career employee

Explanation:

Custom labels are printed using a variety of techniques in the label printing process. Some options when printing labels are Single label and Full page of same label.

What Is Label Printing?

Label printing is the process of creating personalized labels using different techniques. These techniques include wide-format printing, flexographic printing, and digital printing, all of which have an impact on how the label looks, feels, and serves its purpose.

Label Printing Today:

Flexographic printing has continued to advance and prosper up until the 1990s, when digital printing emerged as a brand-new method for producing labels. With the addition of inkjet technology, this process has advanced today, producing premium, full-color labels with a less time-consuming procedure and less waste.

To know more about Label Printing, visit: https://brainly.com/question/4676056

#SPJ9

Some clues left on a drive that might indicate steganography include option D: All of the above.

a. Graphics files with the same name but different file sizes.

b. Multiple copies of a graphics file.

c. Steganography programs in the suspect's All Programs list.

Steganography is a technique for concealing sensitive information within a regular, non-sensitive file or message so as to avoid detection; the sensitive information is then extracted at its intended location. To further conceal or protect data, steganography can be used in conjunction with encryption.

Hence, Steganography is the practice of enclosing openly available information inside of something that seems normal. Steganography is a technique used by cybercriminals to conceal malicious code or stolen data in media like images and audio files.

Learn more about Steganography from

https://brainly.com/question/13089179
#SPJ1

Tamika is working on her GDD and explaining one of the four elements of her game. The element that Tamika is working on is operation. The correct option is B.

A game design document (GDD) is a piece of software that serves as a blueprint for creating your game. It aids in defining the parameters of your game and establishes the overall course of the endeavor, keeping the team in agreement.

The main themes, aesthetics, features, mechanics, and ideas of your game project can be tracked using a Game Design Document, or GDD for short.

Therefore, the correct option is B. operation.

To learn more about GDD, refer to the link:

https://brainly.com/question/29319490

#SPJ1

The element of website design that refers to the website's aesthetic appeal and the functional look and feel of the site's layout and visual design is known as option C: context .

Websites with good content design are simpler to use and rank higher in search results. It takes care of all the tedious work so that using the internet is easier, quicker, and more fun. Understanding your audience is the first step, something we can assist you with if you get in touch.

Therefore, The notion that no design can be created in a vacuum is reflected in contextual design. that a single technology or system may interact in a context that is far larger than it; that environment won't necessarily stay the same (unchanging).

Learn more about website design from

https://brainly.com/question/22775095
#SPJ1

When concurrently processing instructions, a shared memory computer works well with a common data set in a single memory space. (Option C)

In computer engineering, shared memory is the memory that may be accessed by many applications at the same time in order to facilitate communication or minimize redundant copies. Shared memory is a fast way to transfer data between applications.

Shared memory is a storage region shared by all Service Manager server processes on a host server. Sharing data across processes is made easier by using shared memory.

Learn more about shared memory computers:
https://brainly.com/question/14982890
#SPJ1

A network architecture in which one more more high powered computers provide resources or services to other computers on the network is called client-server architecture.

Client-server architecture of a computer network is defined as having one or more host computer from a centralized server acts as a service provider for many remote client processors. In a client-server network architecture, Clients are usually PCs, laptops, workstations, or any other personal devices such as smartphones and tablets, while the servers are located elsewhere on the network, usually on more powerful machines. The examples of a client-server network architecture are: web servers, web browsers, FTP (File Transfer Protocol), DNS (Domain Name System). There are many benefits of a client-server network architecture such as a quick and secure data transfer, efficient data delivery to the client devices, and easier management and maintenance.

To learn more about client-server network architecture visit: https://brainly.com/question/24137718

#SPJ4

A firm that wanted to enable its employees to use and share data without allowing outsiders to gain access could do so by establishing an intranet. The correct option is D.

An intranet is a computer network used within an organization to share information, facilitate communication, provide collaboration tools, operational systems, and other computing services, usually with no outside access.

An intranet is a network that allows employees to create content, communicate, collaborate, and grow the company culture.

Meanwhile, an extranet gives authorized customers, vendors, partners, or others outside the company controlled access.

Thus, the correct option is D.

For more details regarding intranet, visit:

https://brainly.com/question/19339846

#SPJ1

The main goal of issuing multiple instructions in a clock cycle is Multiple issue CPU

It has been examined a number of hardware and software ways to exploit ILP so far. In a pipelined approach, the ideal CPI that we may anticipate is merely 1 We need to consider the possibility of issuing and completing numerous instructions each clock cycle if we wish to lower CPI further. For instance, if we send and process two instructions per clock cycle, our CPI should ideally be 0.5. Multiple issue processors are those that operate in this manner. The operational components on the back end are given a number of instructions. We refer to a processor as being m-issue-wide if m is the most significant number of instructions that can be issued in a single cycle.

To know more about Multiple issue processors, visit;

https://brainly.com/question/3649876

#SPJ4

The type of technology created conveniences by providing wireless communication systems that allowed people to access information wherever they wanted it is  Bluetooth technology.

Using short-wavelength radio channels in the ISM band between 2400 and 2480 MHz, Bluetooth is a patented open wireless technology technique for transmitting information over short distances from stationary and mobile devices.

Hence, You can communicate small quantities of data using Bluetooth Low Energy, sometimes referred to as Bluetooth Smart, a variation of "traditional" Bluetooth. The reduced power consumption of Bluetooth Low Energy is the primary distinction between the two technologies. Thus, it is called "Low Energy."

Learn more about Bluetooth technology from

https://brainly.com/question/28590612

#SPJ1

The option that is a text file that a website stores on a client's hard drive to track and record information about the user is option A: Cookie.

A cookie is a piece of information from a website that is saved in a web browser for subsequent retrieval by the website. Cookies are used to let a server know whether visitors have visited a specific website again.

Therefore, Computer cookies are small files that web servers send to browsers and frequently contain unique identifiers. Each time your browser requests a new page, the server will receive these cookies. It enables a website to keep track of your online preferences and behavior.

Learn more about Cookie from

https://brainly.com/question/14252552
#SPJ1

Flextime is the option of choosing when to workday or workweek

What is flextime?

They can more easily achieve work-life balance and organize work around their other personal errands and commitments with flexitime. Allowing for flextime is also part of providing a family-friendly working environment.

Work flexibility cannot be achieved in all industries and professions (for example, in a factory or a hospital), but it is becoming the new normal for most creative and intellectual workers.

Keeping this in mind, you can increase work flexibility for your employees by adjusting three key parameters:

Working times (e.g. flexitime)

Patterns of work (e.g. job sharing)

Working environments (e.g. remote work, flexplace)

The ultimate goal is to provide any combination of the above to employees, preferably one that increases both employee satisfaction and company productivity at the same time.

Hence to conclude flextime is a boon for employees the option of choosing when to work during the workday or workweek

To know more on flextime jobs follow this link

https://brainly.com/question/14919589

#SPJ1

Dumpster Diving is a non-technical password attack that is enabled if you write a password on a sticky note and through in the trash. The answer is Dumpster Diving.

Dumpster diving is the practice of rummaging through other people's trash for buried treasure. Dumpster diving is a technique used in information technology (IT) to recover data from discarded items that could be used to carry out an attack or gain access to networks.

Dumpster diving isn't just looking through trash for things like sticky-noted passwords or access credentials that are obviously valuable. A hacker using social engineering tactics may utilize seemingly innocent information, such as a phone book, calendar, or organizational chart, password written over stick notes to help them access the network.

Experts advise businesses to implement a disposal policy that requires all paper, including printed copies, to be shredded in a cross-cut slicer before being recycled, all storage media to be erased, and all employees to be trained on the risks of untracked trash in order to prevent dumpster divers from learning anything valuable from the trash.

You can learn more about Dumpster diving at

https://brainly.com/question/15012416

#SPJ4

(b) assign a managed identity to the azure app configuration instance and (d) configure managed identity permission to access the azure key vault are the two actions that need to perform for this situation.

What is the azure key vault?

By leveraging keys that are guarded by hardware security modules, Microsoft Azure Key Vault, a cloud-hosted management solution, enables customers to encrypt keys and tiny secrets (HSMs). Small secrets include passwords and other data that is less than 10 KB in size. PFX documents

Both managed hardware security module (HSM) pools and vaults are supported by the Key Vault service. Keys, secrets, and certificates secured by an HSM can be stored in vaults. Managed HSM pools only accept keys with an HSM backup.

To learn more about the azure key vault, use the link given
https://brainly.com/question/29433704
#SPJ1

If the switch's Mac table contains an entry for the destination host, the switch will broadcast the frame through all of its ports except the port on which it is received if there is no entry for the destination host. However, if there is an entry for the destination host, the switch will broadcast the frame unicast.

What is Mac table?

On Ethernet switches, the MAC address table—also known as the Content Addressable Memory (CAM) table—is used to decide where to forward traffic on a LAN. Let's take a closer look at how the MAC address table is created and used by an Ethernet switch to facilitate the movement of traffic to its destination.

The switch searches for a match between the destination MAC address of the frame and an entry in its MAC address database if the destination MAC address is a unicast address.

The switch forwards the frame out of the designated port if the target MAC address is listed in the table. The switch forwards the frame out all ports other than the incoming port if the destination MAC address is not listed in the table. It's known as an unknown unicast.

Learn more about Mac Table address click here:

https://brainly.com/question/29313724

#SPJ4

confidentiality means protecting proprietary information about company finances, procedures, products, and research that competitors would find valuable

proprietary information includes Financial information, statistics or declarations, trade secrets, merchandise research & innovation, current, and future new products and quality requirements, marketing campaigns, plans or tactics, schematics, customer information, software programs, processes, as well as understanding which has been explicitly labeled and labeled as specialized by the corporation are all examples of information and material related to or affiliated with such a company and its products, business, or activities.

A firm's proprietary information is highly significant and may even be critical data. Typically, the corporation could employ this knowledge to its benefit in its industry. Proprietary items include anything that the creator or producer has the only legal right to use, know, develop, produce, and/or promote.

Learn more about proprietary here: https://brainly.com/question/27332470

#SPJ4

Replay attacks involves capturing data packets from a network and retransmitting them to produce an unauthorized effect

What are replay attacks?

Replay attacks entail retransmitting data packets that have been taken from a network in order to have an unauthorized effect. Receiving duplicate, authenticated IP packets could cause service to be interrupted or have some other unfavorable effect.

A replay attack is an active attack since it needs access to listen to all network messages and the capacity to transmit false ones.

Replay attacks are extremely prevalent because a hacker doesn't need specialised knowledge to decrypt the data after intercepting a transmission from a network. Replay attacks come in many different shapes and sizes and are not just restricted to credit card transactions.

Hence to conclude Replay attacks involves capturing data packets from a network and retransmitting them to produce an unauthorized effect

To know more on attacks in network follow this link

https://brainly.com/question/25807648

#SPJ4

The following will you choose to alter when creating subnets for the address  is 2608.

Subnets are defined as a partition of an IP network logically. A network can be divided into two or more networks via a method called subnetting. A subnet mask is used to divide an IP address in half. Subnetting separates broadcast domains to effectively route traffic, enhancing network performance and speed.

The site prefix is 2608:FE10:1:AA and the interface ID is 002:50FF:FE2B:E708 in the IPv6 address 2608:FE10:1:AA:002:50FF:FE2B:E708. Site prefixes may be displayed as, for instance, 2608:FE10:1:AA::/64, where the network's bit count is listed after a slash.

Thus, the following will you choose to alter when creating subnets for the address  is 2608.

To learn more about subnets, refer to the link below:

https://brainly.com/question/15055849

#SPJ1

Advance Orbital Security would be using Passive Infra Red (PIR) and Active Ultrasonic sound detector in its security system design in order to trigger the security system and call the police upon activation.

Passive Infra Red (PIR) sensor or motion detector security system uses passive infra red that measures changes in the heat energy in the form of electromagnetic radiation radiating from its field of view, and those heat energy are often invisible to human eye. As as soon as the device detected changes in the electromagnetic radiations, it will send out an electric signal from the triggered device to the security system control panel which triggers the alarm sound which then simultaneously sends a cellular signal to the monitoring center at Advance Orbital Security which will then contacted and dispatch the police.

Active Ultrasonic Sound detector in the security system works by emitting ultrasonic sound waves that bounce off objects in its surroundings and return to the sensor with a transducer within the sensor that sends the pulse and receives the echo determining the distance between itself and the target by measuring the time between sending and receiving the signal. As soon as there is a time difference between sending and receiving the echo, it will send out an electric signal, alerting the security system control panel  which then send out e cellular signal to the monitoring center at AOS  security system which will then dispatch the local law enforcement agency.

To learn more about security system visit: https://brainly.com/question/826760

#SPJ4

Data types are automatically assigned as the smallest possible data type: A. true.

In Computer programming, there are four (4) common kinds of data type and these include the following:

Generally speaking, data are categorized automatically to smallest data type and size with each of them matching that of other inputs because they must be blended with other data.

Read more on a data types here: https://brainly.com/question/13438922

#SPJ1

In order to ensure that the given loop runs exactly 10 times, the 'n' should be replaced with 10. Hence, option A '10' is the correct answer.

The correct expression is as follows:

"for(int i = 0; i < 10; i ++ )

{

  System.out.println(i);

}"

The correct value that is replaced with 'n' is 10. Because in the question it is mentioned that the given 'for loop' needs to be run exactly 10 times. For running the loop upto the 10 times, the value of the 'i' is to be less that 10 i.e. 'i < 10'. Since the loop is starting from the value 0 that 'int i=0' and completes its 10th iteration when the value of 'i' reaches 9 that is less than 10.

Therefore, to run the 'loop' up to 10 times, 'n' should be 10.

"

Here is the complete question:

To ensure the loop runs exactly 10 times, what specific value instead of n one should use? for(int i= 0; i<n; i++) { System.out.println(i); }

A.10

B. 11

C. 9

D. None

"

You can leran more about loop at

https://brainly.com/question/26568485

#SPJ4

The code to call the function named send_signal which has no parameters for the function is given as follows;

send_signal()

SendSignal is used to synchronize two threads at a time. To synchronize several threads on the same event, utilize the event management functions: EventCreate: This method creates an event.

Note that Coding generates a collection of instructions that computers may use. These instructions specify the activities a computer may and cannot perform. Coding enables programmers to create programs like websites and applications. Computer programmers may also instruct machines on how to handle data more efficiently and quickly.

Learn more about coding:
https://brainly.com/question/28848004
#SPJ1

1.5D linear array is used to electronic focusing in the elevation direction. A 5 MHz, 1D linear array's performance in the uplift. With a 50 mm focus, the elevation aperture is 10 mm ().

To learn more about Elevation refer to:

brainly.com/question/25748640

#SPJ4

Using the knowledge in computational language in C code  it is possible to write a code that called delete repeats that has a partially filled array of characters as a formal parameter and that deletes all repeated letters from the array.

#include <iostream>

using namespace std;

void printArray(char *arr, int size){

for(int ii = 0; ii < size; ++ii){

cout << arr[ii] << " ";

}

cout << endl;

}

char *delete_repeats(char *arr, int &size){

char *newarr = new char[size];

int count = 0;

for(int ii = 0; ii < size; ++ii){

int flag = 0;

for(int jj = 0; jj < ii; ++jj){

if(arr[ii] == arr[jj]){

flag = 1;

break;

}

}

if(!flag){

newarr[count++] = arr[ii];

}

}

size = count;

return newarr;

}

int main(){

char arr[] = "to be or not to be";

int size = sizeof(arr);

printArray(arr, size);

cout << "After deleting the duplicates" << endl;

char *newarr = delete_repeats(arr, size);

printArray(newarr, size);

return 0;

}

See more about C code at  brainly.com/question/12975450

#SPJ1

For the implementation of toll calculation we are using C++ programming.

What is C++ programming?

A general-purpose programming and coding language is C++ (also known as "C-plus-plus"). As well as being used for in-game programming, software engineering, data structures, and other things, C++ is also used to create browsers, operating systems, and applications.

Code for the toll calculation:

#include<iostream>

#include<iomanip>

using namespace std;

double CalcToll(int hour,bool isMorning,bool isWeekend)

{  

double res;

 if(isWeekend)

 {

 if(isMorning && hour<7)

  {

  res=1.05;

  }

 else if(isMorning && (hour>=7 || hour<=12))

  {    

res=2.15;

 }

  else if(!isMorning && (hour>=1 || hour<=7))

  {

   res=2.15;

 }

 else if(!isMorning && hour>=8)

 {

  res=1.10;

 }

}

else

 {

  if(isMorning && hour<7)

  {

  res=1.15;  

}

  else if(isMorning && (hour>=7 || hour<=9))

  {

   res=2.95;

 }

 else if(!isMorning && (hour>10 || hour<=12 || hour>=1 || hour<=2))   {    res=1.90;

 }

  else if(!isMorning && (hour>=3 || hour<=7))

  {

   res=3.95;

 }

 else if(!isMorning && hour>=8)

  {

  res=1.40;

 }

 }

 return res;

}

int main()

{

 cout<<CalcToll(8,true,false)<<endl;

 cout<<CalcToll(1,false,false)<<endl;

cout<<CalcToll(3,false,true)<<endl;

cout<<CalcToll(5,true,true)<<endl;

return 0;

}  

Output:

2.95

1.9

2.15

1.05

Learn more about C++ Programming click here:

https://brainly.com/question/28959658

#SPJ4

The main service for storing, processing, and protecting data is provided by the Database Engine component of SQL Server. On a single computer, SQL Server enables running up to 50 instances of the Database Engine.

Every application request to perform work on the data in any of the databases that instance manages is handled by a copy of the sqlservr.exe executable running as an OS service known as an instance of the Database Engine. If the application and instance are located on different machines, the applications connect to the instance using a network connection. The SQL Server connection can function as either a network connection or an in-memory connection if the application and instance are both running on the same computer.

Learn more about database here-

https://brainly.com/question/6447559

#SPJ4

Remote desktop refers to the capability of a different computer to connect to and use a distant desktop computer.

Computer is defined as a programmable electrical gadget that takes in raw data as input and applies a set of rules to it to output the outcome. After executing logical and mathematical processes, it renders output and can save the output for further use. It consists of the three previously mentioned major computer components: memory device Unit of control. Unit of Arithmetic and Logical.

Before installing a new version of Windows on your organization's computers, the Compatibility Administrator program aids in resolving any application compatibility problems. Some incompatibilities caused by changes between Windows operating system versions can be resolved.

Thus, remote desktop refers to the capability of a different computer to connect to and use a distant desktop computer.

To learn more about computer, refer to the link below:

https://brainly.com/question/21080395

#SPJ1

Answer: The above statement is true.

ICT refers to technologies that provide access to information through telecommunications.

Explanation: