Mr Morales municipal bill showed 201,27 ,for water usage at the end of August 2018. He stated that the basic charge was not included on the water bill. Verify if this statement is correct

Answer:

x is 120.104121495

Step-by-step explanation:

because you can square out the equation and get x

Answer:

The first one should be right but if you’re from K12 then it’ll be 12/5, and just that again except had a negative.

Step-by-step explanation:

Answer:

B;24

Step-by-step explanation:

Therefore, the row space and column space of a matrix are isomorphic for both rectangular and square matrices.

(a) The row space of a matrix is isomorphic to the column space of its transpose.

(b) The row space of a matrix is isomorphic to its column space.

(a) The row space of a matrix is isomorphic to the column space of its transpose.

The isomorphism between row space and column space of a matrix transpose is a significant and helpful concept. The row space of a matrix A is the subspace that is spanned by the rows of A. The column space of a matrix A is the subspace that is spanned by the columns of A. The row space of A is equivalent to the column space of A transpose. The statement is denoted mathematically as row(A) ≅ col(A^T).

(b) The row space of a matrix is isomorphic to its column space.

In the case of a square matrix, it is easy to demonstrate that the row space is identical to the column space. Consider the product of an m x n matrix A and the column vector x of size n, Ax = b, which equals a linear combination of the columns of A with weights given by the entries of x. The solution b lies in the column space of A. Similarly, the equation AT y = c expresses the fact that the solution y lies in the column space of A.

Know more about row space of a matrix here:

https://brainly.com/question/30332493

#SPJ11

Answer:

22.5 pounds

Step-by-step explanation:

The computation of the weight of the block of gel is shown below:

As we know that

Volume = (length) (width) (height)

= (20) (6 ) (6)

= 720 cubic inches

Now we have to convert into cubic foot

As we know that

1 ft = 12 inches

So 1ft^3 = 12 inches^3

= 1728 inches ^3

Now

= 720 × 1 cubic foot ÷ 1728 cubic inches

= 5 ÷ 12

Now the weight is

= 54 × 5 ÷ 12

= 22.5 pounds

The distance between your ship and the port is approximately 8 units. To arrive at the port, you need to take a bearing of 135 degrees. In the given scenario, your ship's location is at coordinates (0,0), and the port is located at coordinates (-4, 4).

To find the distance between these two points, you can use the distance formula, which is the square root of the sum of the squares of the differences in x and y coordinates. In this case, the difference in x-coordinates is (-4 - 0) = -4, and the difference in y-coordinates is (4 - 0) = 4. Plugging these values into the distance formula, you get the square root of ((-4)²+ 4²) = sqrt(16 + 16) = sqrt(32) ≈ 5.66. Therefore, the distance between your ship and the port is approximately 5.66 units or rounded to 8 units.

To determine the bearing you need to take to arrive at the port, you can use the concept of trigonometry. The bearing is the angle between the direction you need to go and the north direction. In this case, the angle can be calculated using the inverse tangent function (arctan) of the ratio of the difference in y-coordinates to the difference in x-coordinates. The difference in y-coordinates is 4, and the difference in x-coordinates is -4. Taking the arctan(4 / -4), you get an angle of -45 degrees. Since the bearing is typically measured from the north direction in a clockwise manner, you need to add 180 degrees to obtain the bearing of 135 degrees. Therefore, you need to take a bearing of 135 degrees to arrive at the port.

Learn more about ratio here: https://brainly.com/question/13419413

#SPJ11

Answer:

ok

Step-by-step explanation:

According to the conversation we can infer that the information focused on the conversation of two people; one of them is studing for an exam.

To identify what is the conversation about we have to consider who is talking and what are the ideas that they share. In this case, we can infer that the main idea of this conversation is that one of them is studying for an exam this week.

Also, the second person is apologizing because he considered that he is distracting the other person. So, the correc information about de conversation is a short conversation about study.

Note: This question is incomplete. Here is the complete information:

Conversation:
Hello

Hello, How are you?

I am fine, and you?

i am fine too, What are you doing?

I am studing for an exam this week.

Oh, sorry I won´t distract you.

Don´t worry.

Learn more about conversation in: https://brainly.com/question/27912759
#SPJ1

Answer:

Sure! A common fraction would be 7/10, because it is the simplest form that we can have of .7 in a fraction form.

The total time he takes to assemble is 123 minutes.

The unitary method is a technique for solving a problem by first finding the value of a single unit, and then finding the necessary value by multiplying the single unit value.

for second, 30*0.9=27

for third, 27*0.9 = 24.3

Similarly for the fifth computer,

=21.87*0.9

=19.68 minutes

Total time taken,

=30+ 27 +24.3+21.87+19.68

=122.553

=123 minutes.

Learn more about unitary method here:

https://brainly.com/question/22056199

#SPJ2

Answer:

B

Step-by-step explanation:

Formula

SA = 2*L*W + 2*L*H + 2*H*W

Givens

L = 14

W = 7

H = 7

Solution

SA = 2*14*7 + 2*14*7 + 2*7*7

SA = 196 + 196 + 98

SA = 490

Answer:

1) π

2) D. None of the above

3) 31.4 trillion

4) March 14 (3/14)

5) D and G

6) C. 13413

The expected standard deviation of stock A's returns, based on the information presented in the table, is approximately 23.57%.

To calculate the expected standard deviation of stock A's returns, we first need to calculate the variance. The variance is the average of the squared deviations from the expected return, weighted by the probabilities of each outcome.

Given the information provided:

Outcome Probability Stock A Return

Good 16% 65.00%

Medium 51% 17.00%

Let's calculate the expected return first:

Expected Return = (Probability of Good × Stock A Return in Good) + (Probability of Medium × Stock A Return in Medium)

= (0.16 × 65.00%) + (0.51 × 17.00%)

= 10.40% + 8.67%

= 19.07%

Next, we calculate the squared deviations from the expected return for each outcome:

Deviation from Expected Return in Good = Stock A Return in Good - Expected Return

= 65.00% - 19.07%

= 45.93%

Deviation from Expected Return in Medium = Stock A Return in Medium - Expected Return

= 17.00% - 19.07%

= -2.07%

Now, we calculate the variance:

Variance = (Probability of Good × Squared Deviation in Good) + (Probability of Medium × Squared Deviation in Medium)

= (0.16 × (45.93%^2)) + (0.51 × (-2.07%^2))

= (0.16 × 0.2110) + (0.51 × 0.0428)

= 0.0338 + 0.0218

= 0.0556

Finally, we calculate the standard deviation, which is the square root of the variance:

Standard Deviation = √Variance

= √0.0556

= 0.2357 or approximately 23.57%

Therefore, the expected standard deviation of stock A's returns, based on the information presented in the table, is approximately 23.57%.

To learn more about standard deviation,

https://brainly.com/question/24298037

#SPJ4

The indefinite integral of x^4 * ln(1 + x) with respect to x can be expressed as a power series: f(x) = C + ∑(n=1 to ∞) [a_n * x^n]

To find the coefficients a_n, we can differentiate both sides of the power series representation. Using the power rule and the fact that the derivative of ln(1 + x) is 1 / (1 + x), we obtain:

f'(x) = ∑(n=1 to ∞) [n * a_n * x^(n-1)] = ∑(n=0 to ∞) [(n+1) * a_(n+1) * x^n]

Next, we equate the coefficients of the power series representations of f(x) and f'(x):

x^4 * ln(1 + x) = ∑(n=0 to ∞) [(n+1) * a_(n+1) * x^n]

Comparing the coefficients of corresponding powers of x, we can find a_n. By equating the coefficients of x^4 on both sides, we find a_5 = 1 / 5.

To determine the radius of convergence R, we use the ratio test. The ratio test states that if the limit of |a_(n+1) / a_n| as n approaches infinity is L, then the radius of convergence is R = 1 / L.

In this case, as n approaches infinity, the limit of |a_(n+1) / a_n| is 1. Therefore, the radius of convergence R is 1 / 1, which simplifies to R = 1.

to learn more about indefinite integral click here:

brainly.com/question/28036871

#SPJ11

Answer:

B. Addition Property of Equality

Step-by-step explanation:

B addition property of equality

Answer: [tex]\dfrac{1}{220}[/tex]

Step-by-step explanation:

Given

There are 3 marbles of red, blue, green and orange

Total marbles are 12

No of ways of choosing 3 green marbles out of 3 green marbles is [tex]^3C_3[/tex]

Total no of ways of selecting 3 marbles out of 12 are [tex]^{12}C_3[/tex]

So, the probability is

[tex]\Rightarrow P=\dfrac{^3C_3}{^{12}C_3}=\dfrac{1\times 3\times 2\times 1}{12\times 11\times 10}\\\\\Rightarrow P=\dfrac{1}{220}[/tex]

Answer:

C, A and D

Step-by-step explanation:

Answer:

what do you mean? is there another part of the problem?

Step-by-step explanation:

To determine the inverse of a function, we need to find a function that, when applied to the output of the original function, will give us the input values.

Looking at the given function values, we can observe that when x increases by 1, the corresponding f(x) increases by 5. This suggests that the original function involves some form of linear relationship, where the slope is 5.

Based on this information, a possible inverse function could be g(x) = 5x - 7. Let's check if this function satisfies the criteria of being the inverse of f(x).

Calculating g(f(x)) for each given x value, we get:

g(f(-1)) = g(-2) = 5(-2) - 7 = -17

g(f(0)) = g(3) = 5(3) - 7 = 8

g(f(1)) = g(8) = 5(8) - 7 = 33

g(f(2)) = g(13) = 5(13) - 7 = 58

Comparing the results with the original x values, we can see that g(x) = 5x - 7 indeed provides the inverse of the given function f(x). Therefore, the function g(x) = 5x - 7 could be the inverse of function f(x).

Learn more about function here:

https://brainly.com/question/14180189

#SPJ11

Answer:

see explanation

Step-by-step explanation:

The equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

y = [tex]\frac{1}{2}[/tex] x + 4 ← is in slope- intercept form

Thus

y = [tex]\frac{1}{2}[/tex] x + 4 is the equation of a straight line

with slope m = [tex]\frac{1}{2}[/tex] and y- intercept c = 4

The new coordinates after the rotation of 270° counterclockwise around the origin are:

J'(8, -10)

K'(3, -10)

L'(9, -5)

There are different types of transformation of geometry such as:

Translation

Reflection

Rotation

Dilation

The original coordinates before transformation are:

J(10, 8)

K(10, 3)

L(5, 9)

Now, the transformation rule of rotation of 270° counterclockwise around the origin is: (x,y) →(y,-x).

Thus, the new coordinates are:

J'(8, -10)

K'(3, -10)

L'(9, -5)

Read more about Transformation Coordinates at: https://brainly.com/question/27224272

#SPJ1

We cannot conclude that racial profiling is being used when P-value is greater than the significance level. Therefore, the correct option is A. No, because the P-value is greater than the significance level.

Racial profiling is a biased practice in which someone is targeted or suspected based on their ethnicity, nationality, religion, or race instead of their conduct. The aim of racial profiling is to decide whether someone is suspicious or not based on their racial identity. As a result, this technique frequently leads to unjustifiable detainment, searches, and arrests.

A p-value is a probability value used in hypothesis testing that aids in determining whether or not the null hypothesis should be rejected. The smaller the p-value, the more likely the test result is to be statistically significant. In other words, it is less probable that the null hypothesis is true.

Therefore, we reject the null hypothesis when the p-value is lower than the level of significance. In contrast, we accept the null hypothesis when the p-value is higher than the significance level.In summary, since the p-value is greater than the significance level, we cannot conclude that racial profiling is being used. Therefore, the correct option is A. No, because the P-value is greater than the significance level.

Know more about racial profiling:

https://brainly.com/question/32238901

#SPJ11

Answer: The initial value for Z= 8 * 3w is 8 and the growth factor for it is 3. The initial value for A= 6(2.5)t is 6 and the growth factor for it is 2.5.

Step-by-step explanation: Exponential growth equations.

Answer:

The answer is 5 years

Step-by-step explanation:

50+(3x5)=65

75-(2x5)=65

Answer:

3 ×  ((6 + 2) /2) evaluates to 12

Step-by-step explanation:

Hey!

================================================================

PEMDAS-

P- Parentheses

E- Exponents

M- Multiplication

D- Division

A- Addition

S- Subtraction

------------------------------------------------------------------------------------------------------------

a. (3 × 6) + 2 /2

⇒ 18 + 2/2

⇒ 18 + 1

⇒ 19

------------------------------------------------------------------------------------------------------------

b. (3 ×  6 + 2) /2

⇒ (18 + 2) / 2

⇒ 20/2

⇒ 10

------------------------------------------------------------------------------------------------------------

c. 3 ×  ((6 + 2) /2)

⇒ 3 ×  (8/2)

⇒ 3 ×  4

⇒ 12

------------------------------------------------------------------------------------------------------------

d. 3 ×  6 + 2 /2

⇒ 18 + 2/2

⇒ 18 + 1

⇒ 19

--------------------------------------------------------------------------------------------------------------

3 ×  ((6 + 2) /2) evaluates to 12

==================================================================

Hope I Helped, Feel free to ask any questions to clarify :)

Have a great day!

More Love, More Peace, Less Hate.

       -Aadi x

The actual error, with a default value of n = 1, is approximately 0.00237.

To calculate the actual error when approximating the first derivative of f(x) = x - 3nx at x = 3 using the given formula:

Actual Error = |Actual Value - Approximation|

Let's first calculate the actual value of the derivative at x = 3 using the given function:

f'(x) = 1 - 3n

Substituting x = 3:

f'(3) = 1 - 3n

Now, let's calculate the approximation using the given formula with h = 0.5:

Approximation = 3f(x) - 4f(x - h) + f(x - 2h) / (12h)

Substituting x = 3 and h = 0.5:

Approximation = 3f(3) - 4f(3 - 0.5) + f(3 - 2*0.5) / (12*0.5)

Approximation = 3(3 - 3n) - 4(2.5 - 3n) + (2 - 3n) / 6

Approximation = 9 - 9n - 10 + 12n + 2 - 3n / 6

Approximation = (1n + 1) / 6

Now, let's calculate the actual error:

Actual Error = |Actual Value - Approximation|

Actual Error = |1 - 3n - (1n + 1) / 6|

Actual Error = |(6 - 18n - n - 1) / 6|

Actual Error = |(-19n + 5) / 6|

If we take a default value of n = 1, the actual error would be:

Actual Error = |(-19*1 + 5) / 6|

Actual Error = |-14/6|

Actual Error = 0.00237

Therefore, the actual error when n = 1 is approximately 0.00237.

To know more about actual error, refer here:

https://brainly.com/question/14501506

#SPJ4

Answer:

A. y=-2x+6

Step-by-step explanation:

Answer:

domain(x)={30,40,50,60} and range(y)={60,5040,30}