Naturally found uranium consists of 99.274%, 238U, 0.720%235U, and 0.006% 233U (by mass). As we have seen, 235U is the isotope that can undergo a nuclear chain reaction. Most of the 235U used in the first atomic bomb was obtained by gaseous diffusion of uranium hexafluoride, UF6(g).
A.) What is the mass of UF6 in a 30.0-L vessel of UF6 at a pressure of 690 torr at 360 K?
B.) What is the mass of 235U in the sample described in part A? The atomic mass of uranium-235 is 235.044 u.
C.) Now suppose that the UF6 is diffused through a porous barrier and that the change in the ratio of 238U and 235U in the diffused gas can be described by the equation r1r2=urms1urms2=3RT/M13RT/M2ââââââââ=M2M1ââââ. What is the mass of 235U in a sample of the diffused gas analogous to that in part A?
D.) After one more cycle of gaseous diffusion, what is the percentageof 235UF6 in the sample? (In your calculations unrounded values from previous parts should be used.)

Topping off a leaking A/C system is Allowable everywhere in the U.S., except where state or local laws prohibit it. Thus, option C is correct.

Law is a set of rules created and enforced by social or governmental institutions to regulate behaviour, the precise definition of which has long been debated. It has been described as a science as well as an art form.

These laws serve as a guideline for acceptable behaviour and serve as a standard of conduct for citizens.

Therefore, option C is correct, that topping off a leaking A/C system is legal throughout the United States, except where state or local laws prohibit it.

Learn more about the law, refer to:

https://brainly.com/question/15400748

#SPJ4

Ethernet is not a type of circuit that needs to be considered when planning for technology design capacity.

Ethernet has been used for connecting devices in wired LANs and wide area networks for years (WAN). Through a protocol—a set of guidelines or common network language—it enables devices to communicate with one another.

Ethernet is the term used to describe how network devices format and transmit data so that other devices connected to the same LAN or campus network can recognize, receive, and process the data. The actual, sheathed wiring used for data transmission is called an Ethernet cable.

Ethernet is most likely used by connected devices that connect wirelessly but use cables to access a physically localized network. End users of all types, including businesses and gamers, depend on the reliability and security of Ethernet connectivity.

Learn more about Ethernet

https://brainly.com/question/1637942

#SPJ4

A highlight table is used to: A. visualize the relative proportion of values in a table.

In Computer technology, tableau can be defined as an interactive data visualization software application (program) that is designed and developed by an American interactive data visualization software organization, with a primary focus on data visualization and business intelligence.

In Computer technology, a highlight table can b defined as a type of table that is designed and developed to display, show, illustrate, represent, or visualize categorical data in a text table with the aid of a color.

Read more on data here: brainly.com/question/26207955

#SPJ1

Answer:

False

Explanation:

Answer:

True

Explanation:

It is to be noted that the statement that is true about the pricing model on AWS is: "Storage is typically charged per gigabyte." (Option B)

One is to note that Amazon Web Services (AWS), Inc. is an Amazon company that offers metered, pay-as-you-go cloud computing platforms and APIs to consumers, businesses, and governments. Clients frequently use this in conjunction with autoscaling.

AWS has a pay-as-you-go pricing model, so you only pay for the resources you utilize. The kind and quantity of resources utilized, the area in which the resources are hosted, and the length of time the resources are used are all factors that might impact the cost of utilizing AWS.

Learn more about AWS:
https://brainly.com/question/28903912
#SPJ1

Problem-solving becomes quicker and more effective thanks to RPN's elimination of the necessity for parenthesis in complicated calculations and keystroke reduction. The lowest two rows of the stack are always collapsed when an operator key (+ - x) is pressed. Thus, option C is correct.

The “infix notation” of conventional arithmetic expressions, in which the operator symbol appears between the operands, is in contrast to reverse Polish notation, also referred to as postfix notation. In real life, a stack structure makes it simple to assess RPN.

In contrast to the format we are accustomed to, infix notation, where the operator is between the numbers, the notation is chosen because the format that the equation is in makes it easier for machines to understand.

Therefore, ABC+-E×F-*+GHK*+/

Learn more about postfix here:

https://brainly.com/question/14294555

#SPJ4

The force of given members in tension or compression are CD = 11.25 = 11.2 kN (C), CF = 3.21 kN (T), CG = 6.80 kN (C)

Rope bridges can support both themselves and the load they carry because tension forces cause material to be pulled and stretched in opposing directions. The rocks of an arch bridge press against one other to carry the weight because compression forces squeeze and push material inward. The bottom beam fiber tends to stretch when subjected to a normal vertical live load, whereas the top beam fiber tends to compress (tension). Comparatively speaking, the corresponding truss's bottom chord is under tension and its top chord is in compression. When two or more physical objects come into contact, they apply forces to one another. We label these contact forces differently depending on the objects that are in contact.

To learn more about  compression click here

brainly.com/question/30060592

#SPJ4

Answer:

CURRENT (AMPERAGE) or Amp or amp or amps

Explanation:

CURRENT is the quantity or flow rate of electrons moving past a point within the circuit in one second. Current flow is also known as amperage, or amps for short. Higher voltage will produce higher current flow, and lower voltage will produce lower current flow.

The unit of electricity that typically expresses the volume of electron movement in a circuit is known as the ampere.

Electrons may be characterized as the types of subatomic particles which are always revolving around the nucleus of an atom. These types of subatomic particles are negatively charged in nature. Electrons were discovered by J.J. Thomson.

According to the context of this question, the measurement of the current is determined by the fact that it describes the quantity or flow rate of electrons moving in a circuit.

Ampere is the international unit that is specifically utilized in order to measure current. The unit of current, amperes expresses the number of electrons that generally flows past a point in a circuit over a given time.

Therefore, the unit of electricity that typically expresses the volume of electron movement in a circuit is known as the ampere.

To learn more about the Current flow, refer to the link:

https://brainly.com/question/29537921

#SPJ2

Your question seems incomplete. The most probable complete question is as follows:

Which unit of electricity expresses the volume of electron movement in a circuit?

NoSQL databases, like denormalized relational databases, optimize for specific queries in your application. In other words, you know what queries you want to optimize for, so you choose a NoSQL product and a data design to support the queries you'll run.

Explanation in Detail:

I believe NoSQL is a meaningless term. Because it is perfectly possible to have relational databases that do not use SQL and vice versa, the concept should probably be called Not-Only-Relational (in theory at least).

A normalized relational database, on the other hand, is intended to store data with the fewest data anomalies and to maximize data integrity. This is obviously a good goal, but it is diametrically opposed to performance, which is what most people care about.

So, in my opinion, a NoSQL database is best if you want to optimize for specific queries in a specific application. If you want a database that is safe for your data and supports the widest range of queries against that data (for example, if you don't know what queries your app will need to run), a SQL database is the best choice.

To know more about NoSQL databases, visit: https://brainly.com/question/29835951

#SPJ4

Once the needs have been defined in the logical network design, the next step is to develop a technology design.

Practical applications are used to illustrate the engineering scope, content, and professional practises in technological design. In order to solve engineering design problems and create innovative designs, students in engineering teams use concepts and abilities from technology, science, and mathematics.

Engineering design criteria like design effectiveness, public safety, human factors, and ethics are researched, developed, tested, and evaluated by students. For students interested in engineering, design, innovation, or technology, this course is a must-take.

Students who take Technological Design are prepared for the capstone Engineering Design course, which serves as a transitional course for post-secondary study.

Learn more about technological design

https://brainly.com/question/20162876

#SPJ4

As a result, Day(1,n+1) will be a list of days to buy a new automobile and sell the old one for the least amount of money. The code is given below.

Dynamic programming is mostly an improvement over straightforward recursion. Dynamic Programming may be used to optimize any recursive solution that has repeated calls for the same inputs. To avoid having to recompute the outcomes of sub-problems later, the idea is to just store them. With this straightforward improvement, time complexity is reduced from exponential to polynomial.

To write a program on dynamic program on car ownership:

By using the given data,

we have to write the program,

OPT(i, j) = minimum cost possible of purchasing car at year i, maintaining from i to j and then selling at j

OPT(i, i+1) = p(i)+m(i, i+1)-v(i, i+1)

OPT(i, j) =(min k) OPT(i, k)+OPT(k, j) for  i ≤ k ≤ j

For each pair of (i, j) where i<j, Day(i, j) will contain the list of days to buy car between i to j.

To see the code, see in the attached image.

Time complexity = O(n4).

Therefore, Day(1,n+1) will be a list of days to purchase a new automobile and sell the old one for the lowest price.

To learn more about the dynamic programming;

https://brainly.com/question/18720923

#SPJ4

Utilize a capacitor with a physical area, a, that is half that of the original capacitor. quadruple.

As a substitute energy storage component, a capacitor can be used in place of batteries. In situations where a sudden surge of power is required, capacitors are frequently used as energy storage components.

A capacitor, in contrast to a battery, is a component of a circuit that momentarily stores electrical energy by dispersing charged particles between (often two) plates to produce a potential difference. When a capacitor is charged, it may discharge all of its stored energy far more quickly than a battery.

To know more about capacitor  visit :-

https://brainly.com/question/17176550

#SPJ4

The key elements  that needs to be addressed in Jupiter Bach’s corporate culture for the new sustainability strategy to have an impact on the performance are:

There are several key elements that should be addressed in Jupiter Bach's corporate culture in order for the new sustainability strategy to have a meaningful impact on the company's performance:

Leadership: It is important for the leadership team at Jupiter Bach to fully support and embody the values and goals of the sustainability strategy.

Communication: Effective communication is key to the success of any corporate culture change, and this is especially true when it comes to sustainability.

Employee engagement: The sustainability strategy will only be successful if it is embraced by the entire workforce at Jupiter Bach.

Therefore, in Continuous improvement: Sustainability is an ongoing journey, and it is important for Jupiter Bach to continuously assess and improve its practices in order to make progress towards its goals.

Learn more about sustainability strategy from

https://brainly.com/question/1581810

#SPJ1

The power drawn by the air conditioner is 1353.38 Watt

Power can be calculate as follows

T1: The home's initial temperature of 35 °C

T2 = 20°C, the house's final temperature

Δt =38 minutes, or 38 minutes x 60 seconds = 2280 s, are needed to cool the house.

800 kg is the mass of air in the home, or m.

0.72 kJ/kgK for Cv, specific heat at constant volume.

1.0 kJ/kgK for specific heat at constant pressure (Cp).

we can calculate the removing heat as follows:

q = mCvΔT

q = 800×720×(35-20) (35-20)

q = 8640000 J

Average removal rate of ears

Q= q/t

Q = 8640000/ 2280 = 3789.47 W

COP = Q/ W

W= Q/ COP

W= 3789.47/ 2.8

W = 1353.38

Learn more about power at https://brainly.com/question/24003945

#SPJ4

Answer:

Biological Hazards.

Chemical Hazards.

Physical Hazards.

Safety Hazards.

Ergonomic Hazards.

Psychosocial Hazards.

At high temperatures, there is a large amount of radiative heat transfer via the fibre insulation employed in thermal protection systems (TPS) (1200 C).

At high temperatures, fibre insulation used in thermal protection systems (TPS) radiatively transfers a substantial amount of heat (1200 C). The TPS's ability to insulate can therefore be significantly affected by reducing the radiative heat transfer through the fibre insulation. Directly applying reflective coatings to the individual fibres of a fibrous insulation should reduce radiative heat transfer, resulting in a less effective thermally conductive insulation. Sol-gel processes have been used to create coatings with high infrared reflectivity. By using this method, fibre insulation can receive uniform coatings without noticeably increasing its weight or density. To assess coating performance, ellipsometry, scanning electron microscopy, and Fourier Transform infrared spectroscopy have all been used.

Know more about uniform here:

https://brainly.com/question/14716338

#SPJ4

How does hexagonal packing work? Hexagonally tightly packed (hcp) describes layers of packed spheres in which they alternately cover and expose one another. A close-packed structure called a slip framework is hexagonally close-packed. The hcp structure is very universal for elemental metals, including beryllium.

unit cell for which lattice parameter c/a is 1.58

The radius of the titanium atom is 0.1445nm=1.445×−8c

For a titanium unit cell

Atomic weight (A)=47.867/mol

Calculate the unit cell volume

(V)c=6R2c√3=6×(1.445×10−8)2×1.58a√3

Here

a=2R

(Vc)=6×(1.445×10−8)2×1.58×(2×1.445×10−8)×√3=9.9084×10−23 cm3/unitcell

To know more about close-packed structure visit:-

brainly.com/question/6665073

#SPJ4

The Correct option is MN/s.

SI is that it is an acronym for Système International in French. The metric system that is used for all measurements is the International System of Units (SI). In technological and scientific research, SI units play a crucial role. It is composed of seven base units, which define 22 derived units. The SI units can be expressed as fractional quantities or standard multiples.

The various quantities can be expressed in a variety of SI units used in physics. Base units and derived units are the two categories that can be used to classify the quantities.

Given unit kN/ms

where k = kilo = (10)³

N = newton

s = second

m = mili = (10)⁻³

so kN/ms = ((10)³ N)/((10)⁻³ s)

kN/ms = ((10)³ (10)³ N)/s  

base same power add (10)³ (10)³ = (10)⁶

(10)⁶ = mega = M

kN/ms = ((10)⁶N)/s

kN/ms = MN/s

Hence the MN/s is correct SI form.

Learn more about  SI unit;

https://brainly.com/question/12750330

#SPJ4

The value that applied force acting on the piston is 892.71 N.

[tex]p_1[/tex] = mercury density = 13600 kg/m^3

[tex]p_2[/tex] = water density = 1000 kg/m^3

h = height of mercury = 100 mm or 0.1 m

[tex]h_1[/tex] = height of water = 60 mm or 0.06m

A = piston area = 0.07m

First, we can calculate the total of pressure on the piston which is equal to pressure of mercury cylinder subtract the pressure of water cylinder.

ΔP = [tex]p_1[/tex]*g*h - [tex]p_2[/tex]*g*[tex]h_1[/tex]

= 13600*9.81*0.1 - 1000*9.81*0.06

= 12753

Then, we multiply the total pressure by area to calculate the force on the piston. So,

P = ΔP * A

= 12753 * 0.07

= 892.71 N

Thus, the force on piston is 892.71 N.

You question is incomplete, but most probably your full question was

(image attached)

Learn more about force here:

brainly.com/question/28012687

#SPJ4

Note that the above prompt is related to the use of Autodesk Software. The cause of the above warning is: "The Revit or view settings prohibit the newly generated object from being displayed."

Autodesk is a design software firm that serves customers in the manufacturing, architectural, building, and construction sectors, as well as media and entertainment. Autodesk has been in the forefront of robotics, augmented and virtual reality, and 3D printing.

It is to be noted that the Autodesk design tool is important because it is extensively utilized in many sectors.

It helps professionals in designing, testing, and visualizing goods and systems in a virtual environment, which may be more efficient and cost-effective than doing so in the actual world.

Learn more about Autodesk:
https://brainly.com/question/24788708
#SPJ1

Full Question:

Autodesk Related Prompt

Issue:

When creating an element, section, or linking a file within Revit, you receive the following warning message:

Warning

"None of the created elements are visible in Floor Plan: Level 2 View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings."

What is the cause of the above warning?

The Cartesian representation of exp(-j90) is 0 - 1j

Generally, The Cartesian representation of a complex number is its real and imaginary parts. In this case, the number exp(-j90) is a complex number with a phase of -90 degrees, which can be represented as a rotation by -90 degrees in the complex plane.

To find the Cartesian representation of exp(-j90), we can use Euler's formula, which states that a complex number in polar form (r,θ) can be represented in Cartesian form (x,y) as follows:

x = r * cos(θ) y = r * sin(θ)

where r is the magnitude of the complex number and θ is its phase angle in radians.

In this case, the magnitude of exp(-j90) is 1, since it is a unit complex number (its magnitude is 1). The phase angle is -90 degrees, which is equal to -π/2 radians. Therefore, the Cartesian representation of exp(-j90) is:

x = 1 * cos(-π/2)

= 0

y = 1 * sin(-π/2)

= -1

So the Cartesian representation of exp(-j90) is 0 - 1j.

Read more about cartesian representation

https://brainly.com/question/29298525

#SPJ1

If you receive error 'The login is from an untrusted domain', this may mean that you changed password on your working machine and now need to update password on SQL Server machine.

Click Properties from the menu when you right-click the server you want to change. A security page should be chosen. Select either Windows Authentication or SQL Server and Windows Authentication mode under the Server authentication header. Select OK. Kerberos-based connections to SQL Server are supported by Azure Data Studio. You must configure a Kerberos ticket that connects your current user to a Windows domain account in order to use integrated authentication (Windows Authentication) on macOS or Linux. Click Start on the taskbar, then select Control Panel. Click Turn Windows Features on or off under Programs and Features in the Control Panel. Expand World Wide Web Services, Internet Information Services, and Security. Click OK after choosing Windows Authentication.

To learn more about untrusted domain click the link below:

brainly.com/question/28990038

#SPJ4

Below is an example of the way that you can create the instance variables and constructor for the Employee class:

public class Employee {

 private String name; // instance variable to store the employee's name

 private int badgeNumber; // instance variable to store the employee's badge number

 private double hourlySalary; // instance variable to store the employee's hourly salary

 public Employee(String name, int badgeNumber, double hourlySalary) {

   this.name = name;

   this.badgeNumber = badgeNumber;

   this.hourlySalary = hourlySalary;

 }

}

The name, badgeNumber, and hourlySalary variables are marked as private, which means that they can only be accessed within the Employee class. The constructor takes in three arguments: the name, badgeNumber, and hourlySalary of the employee.

Therefore, Note also that this is just one way to implement the Employee class and its constructor. There are other ways to do it as well.

Learn more about instance variables from

https://brainly.com/question/28265939
#SPJ1

True, A switch belongs exclusively to its local network, whereas a router belongs to two or more local networks.

This is the main fundamental distinction between a switch and a router.

What is Local Area Network?

A group of different kinds of devices connected to one another in a single physical location/place, such as a building, office, or home, is known as a local area network (LAN). A LAN can be tiny or big, with one user's home network or hundreds of users and devices in an office or school as examples.

The fact that a LAN connects devices that are located in a single, constrained region is its sole distinguishing feature, regardless of size. A wide area network (WAN) or metropolitan area network (MAN), in contrast, spans a wider geographic area. A few WANs and MANs link numerous LANs collectively.

To know more about Network , visit: https://brainly.com/question/29675361

#SPJ4

A permanent split capacitor (PSC) motor that is running and up to speed will have the start winding: A) energized.

In Electrical engineering, an electric motor can be defined as an electrical machine that is designed and developed to convert electrical energy into kinetic energy, especially through electromagnetic induction.

A permanent split capacitor (PSC) Motor simply refers to a type of single-phase alternating current (AC) motor in which the capacitor is permanently connected, rather than being connected only when it is starting.

This ultimately implies that, the start winding of a permanent split capacitor (PSC) Motor is energized when it is running and up to speed.

Read more on electric motor here: https://brainly.com/question/479333

#SPJ1

Complete Question

A permanent split capacitor (PSC) motor that is running and up to speed will have the start winding ____.

A) energized

B) de-energized

C) in series with the run winding

D) removed from the circuit

Answer:

#include <iostream>

using namespace std;

int main() {

int x;

cin>>x;

if (x>0){

for (int i=1;i<=x;i++){

if(x%i==0){

cout<<i<<" ";

}

}

}

else {

cout<<"write a positive num";

}

return 0;

}

Explanation:

i first checked if the num is positvie if no you ask the user for a positive num

i used a loop to find the factors by dividing the entered number on every num from 1 to the num

Possible, tensile strength increases with molecular weight. Therefore the linear and isotactic polymer will have the higher tensile strength.

Possible, tensile strength increases with molecular weight. Therefore the linear and isotactic polymer will have the higher tensile strength.

1) Possible, With an increase in molecular weight, tensile strength rises. As a result, polymers that are linear and isotactic will have a greater tensile strength.

2) It seems unlikely that both polymers display the same level of enhanced tensile strength, but we lack sufficient data to determine how much is raised and which polymer exhibits a greater value.

3) Due to a higher number of covalent bonds, network polymers may, in general, have higher tensile strengths than branch structures.

To learn more about isotactic polymer refer to:

https://brainly.com/question/13846558

#SPJ4

Answer:

Explanation:

To answer your question, I will start by outlining the requirements needed to design the interior panel C of the flat plate floor using EFM. Firstly, we need to consider the fact that fy = 414 MPa, fd = 25 MPa, LL =4.8 kN/m² and DL = 1.0 kN/m² in addition to self-weight of slab and floor height=3.66 m. Also, C1 and C2 are 460 mm and thickness of the slab hf is 216 mm respectively.

After considering the given information, we can proceed with designing interior panel C by first finding out the ultimate moment capacity for this panel according to EFM guidelines. Using a combination of flexural strength equations and suitably selected material strength constants based on slab type, we can calculate this capacity. Then determination of reinforcement size along with other design criteria such as yield line analysis need to be calculated in order to ensure stability and durability of structure under all kinds of loads. This process needs to be repeated for each interior panel in order to complete their EFM design process accurately. EFM is a powerful tool that can help you design the interior panel C of the flat plate floor shown in Figure below. With EFM, you can determine the optimal dimensions and material properties for the panel, and you can also assess the structural performance of the panel under different loads and conditions.

The Array object, like arrays in other programming languages, allows for the storage of a group of various elements under a single variable name and provides members for carrying out standard array operations.

The sum is equal to zero if the integers I are also equal to zero. If they add up to 1, then the result is 2. The sum is equal to 3 if they add up to 3. The sum is equivalent to 6 if they add up to 5. If they add up to 7, then the total also adds up to 7. The sum is equal to 8 if they add up to 8.

"#include iostream"

"cstring" should be included using the namespace std;

char integers[size]; int main(); /Declaring Variables & Character Array; int size = 100;

Small and large numbers are represented by the characters "9," "0," etc.

cout "Please enter a series of integers with a comma between each one."; cin >> integers; /Gathering Integers;

/To determine the length of the string, enter size = (strlen(integers) + 1);

creating the sum variable by setting it to 0;

The string's integers are added together as a whole using the formula for (int I = 0; I size; i++)

If (integers I >= "0" && I = "9" && I >= "0")

To know more about Array visit :-

brainly.com/question/19570024

#SPJ4