Answer:
True
Explanation:
In an alternating current, voltage levels can be easily increased or decreased as per the requirements of the energy distribution in practical world.
Hence, the given statement is true
Do Planets with more mass have more gravity than planets with less mass
Explain how the fountain pen is filled up with ink
Answer:
It is because of air pressure
Explanation:
Filling a fountain pen with ink involves various methods, but the most common approach uses a piston or converter mechanism.
To begin, the pen is prepared by removing the cap and separating the barrel from the grip section. The type of filling system is checked, whether it's a built-in piston or a removable converter.
For a piston-filling method, the knob is twisted counterclockwise to retract the piston. The nib is submerged in the ink bottle, and by turning the knob clockwise, the piston extends, creating a vacuum that draws ink into the reservoir through capillary action.
The piston is then retracted, sealing the ink inside. In the case of a converter, it is removed from the grip section and dipped into the ink bottle, followed by operating the plunger or squeezing to expel air.
Releasing the plunger allows ink to enter the converter through atmospheric pressure. After cleaning any excess ink, the pen is reassembled.
Know more about fountain pen:
https://brainly.com/question/17340241
#SPJ4
E
Please select the word from the list that best fits the definition
freezing point of carbon dioxide
A. Meter
B. Liter
C. Kilogram
D. Kelvin
Traveling waves propagate with a fixed speed usually denoted as v (but sometimes c). The waves are called __________ if their waveform repeats every time interval T. Traveling waves propagate with a fixed speed usually denoted as (but sometimes ). The waves are called __________ if their waveform repeats every time interval . transverse longitudinal periodic sinusoidal
Answer:
Periodic.
Explanation:
Electromagnetic waves is a propagating medium used in all communications device to transmit data (messages) from the device of the sender to the device of the receiver.
Generally, the most commonly used electromagnetic wave technology in telecommunications is radio waves.
Radio waves can be defined as an electromagnetic wave that has its frequency ranging from 30 GHz to 300 GHz and its wavelength between 1mm and 3000m. Therefore, radio waves are a series of repetitive valleys and peaks that are typically characterized of having the longest wavelength in the electromagnetic spectrum.
Basically, as a result of radio waves having long wavelengths, they are mainly used in long-distance communications such as the carriage and transmission of data.
Generally, a fixed speed is used for the propagation of traveling waves and this speed is usually denoted with the variable "v" or sometimes "c."
Furthermore, if the waveform of a traveling wave is repeated every time at specific intervals T, it is referred to as periodic wave.
Mathematically, the period of a traveling wave is given by the formula;
[tex] Period = \frac {1}{T} [/tex]
Where;
T is the time measured in seconds.
Which one of the statements below is true about mechanical waves?
They must travel in empty space.
They can travel in a vacuum.
Both sound and light are examples of mechanical waves.
They require a medium to travel through.
Answer:
They require a medium to travel through.
Explanation:
Look at this attached photo
Answer:
C) Kinetic energy
Explanation:
Since the skateboarder is ALREADY going down the hill, he is using kinetic energy.
Kinetic energy is when you're moving and in motion
Two identical speakers are set some distance apart in a large open field. Both are producing sound, in unison, with a wavelength of 4 m. An observer wandering around the field notices that the sound is surprisingly loud at certain locations and unusually quiet at others. The observer concludes that this is the effect of interference between the two sources of sound waves. For each location, indicate which sort of interference would occur at that point.
Answer:
Constructive interference occurs at the surprisingly loud locations and destructive interference occurs at the unusually quiet locations.
Explanation:
This is because, constructive interference tends to combine the effects of the wave when they are in phase (that is, moving in the same direction), which thus amplifies the effect and produces surprisingly loud sounds at those locations, while destructive interference occurs when the waves are out of phase with each other(that is, move in opposite directions) and thus, their effects tend to cancel out thus producing locations of unusually quiet sounds.
Which of the following best describes
pollutants?
A. harmful substances in the air, water, or soil
B. radioactive particles that pass through the atmosphere
C. oxygen molecules that are released by plants
D. beneficial substances that increase overall health
Answer:
A. harmful substances in the air, water, or soil
hope my ans helps
be sure to follow me
stay safe
have a good day
What are the 3 least important cell parts and why
Answer:
The three main/basic parts of the cell are:
Cell Membrane (Plasma Membrane)
Cytoplasm
Nucleus
Explanation:
Each cell is surrounded by a lipid-rich Cell membrane (also called the Plasma Membrane) that forms a boundary between the cell and its environment.The membrane encloses the Cytoplasm, which includes all cell contents (except the Nucleus, in cells that have one). Cytosol is the fluid of Cytoplasm.Nucleus is the central part of an atom, and the process of milk production and secretion begins here; the organelle that contains DNA in eukaryotic cells.In many places on Earth, humans are responsible for the removal of grasses, shrubs, trees, and other plants with roots that hold soil in place. This activity is best described by which of the following? *
A) deforestation
B) urbanization
C) air pollution
D) rise in sea level
A horizontal force of 300.0 N is used to push a 145-kg mass 30.0 m horizontally in 3.00 s. Calculate the power developed.
Answer:
3 * 10³J/s
Explanation:
Given :
Force applied, F = 300 N
Distance, d = 30 m
Time, t = 3 seconds
Power, P = Workdone / time
Recall :
Workdone = Force * distance
Workdone = 300 N * 30 m = 9000 Nm
Workdone = 9 * 10³ J
Power = (9 * 10³ J) / 3s
Power = 3 * 10³J/s
What is being despited in this picture
Answer:
i am guessing for reflection but not so sure
What are the "Fundamentals of Economics?
Answer:
In business and economics, fundamentals represent the primary characteristics and financial data necessary to determine the stability and health of an asset. This data can include macroeconomic, or large-scale factors, and microeconomic, or small-scale factors to set a value on securities or businesses.
Explanation:
Answer found from:
https://www.investopedia.com/terms/f/fundamentals.asp#:~:text=In%20business%20and%20economics%2C%20fundamentals,value%20on%20securities%20or%20businesses.
NO LINKS PLEASE
At what speed do a bicycle and its rider, with a combined mass of 90 kg
k
g
, have the same momentum as a 1500 kg
k
g
car traveling at 4.0 m/s
m
/
s
?
Answer:
2
Explanation:
As air pressure decreases, what happens
to the density of the atmosphere?
A. increases
B. decreases
C. stays the same
D. not enough information to tell
Answer:
Increases
Explanation:
This is because if there are more gas particles available within a given area, the greater the air density. Therefore, the greater the air density, there will be more gas particles per unit volume. Which indicate that there are more air particles bombarding with a surface. Therefore, the air pressure increases as the air density increases and visa versa.
Kinetic energy is the energy of motion and increases with the speed of the wave.
a. True
b. False
Potential energy is the energy of gravitational pull on the wave.
a. True
b. False
A 10.0 kg gun applies a force of 250. N left on a 0.0200 kg bullet. What is the force on the gun? A. 5.00N B. 25.0N C. 12,500N D. 250.N
Answer:
The answer is D.250N.
Explanation:
Which of the following is an example of an electromagnetic wave?
a radio wave
a water wave
the oscillation of a spring
sound waves
Which of the following is a good way to look for jobs today?
1.Networking on LinkedIn
2.Checking the bulletin board at the local grocery store
3.Putting a résumé on a job hunting website
4.Searching the help wanted section in the newspaper
I think it's
1. Networking on LinkedIn
Please solve it.... Urgent
Answer:
a) ferromagnetic type, b) superconductor or ferromagnetic
Explanation:
In substances, magnetism is the result of the magnetic moments of the electrons in their orbits and of the spin.
These two let us take interacting magnetic between them, if the sum of these magnetic moments is maximum we have a material of the ferromagnetic type, which is represented in figure a, where all the magnetic moments are aligned in one direction and this type of material is a magnet permanent.
Figure b shows a material where the magnetic moments have a circular shape, so the total moment is zero.The type of substrate material can have several possibilities
* The most test is that the substrate material is a superconductor where the marked areas are the superconducting magnetic areas and the areas without spine are the normal areas
* Another possibility is that the material is ferromagnetic, that is, there are several magnetic sub-networks in different orientation, resulting in a random field, the material is not a permanent magnet
A form of oxygen with three atoms of
oxygen bonded together instead of two is
called what?
A. triple oxygen
B. ozone
C. oxygen-3
D. trioxygen
Answer:
ozone, letter b
ozone is basically an allotrope of oxygen having three atoms instead of two.
Which one of the statements below is true about mechanical waves?
They must travel in empty space.
They can travel in a vacuum.
Both sound and light are examples of mechanical waves.
They require a medium to travel through.
Answer:
Both sound and waves
Explanation:
Thank me later
help its due in 13 minutes!!!!
Answer:
sedimentary rock formed over a long period of time. small pieces of rock called sediments are carried away and deposited in layers. over time more and more layers of sediments form, pressing down on the layers below. the weight of the layers squeezes the sediments together during the process know as compaction. as the water is squeezed out, crystals form. the sediments stick together. this process is called cementation
A vector is
In English
Once a scientific theory is formed, there is no further investigation needed.
True
False
In rectilinear motion, motion depends on a?
Answer:
The object moving in a straight path is called linear or rectilinear motion.
An object is said to be in rectilinear motion if it changes its position,along a straight line path.
Explanation:
example: A car moving in a straight road.
A jet moving straight in air
Refracts light to form an image on the lining of your eyeball?
Answer:
In a healthy eye, the cornea bends or refracts light rays so they focus precisely on the retina in the back of the eye. The back of the eye is lined with a thin layer of tissue containing millions of photoreceptor (light-sensitive) cells. This is the retina, where light rays focus into an upside-down image.
Explanation:
A 2 kg brick is moving at a speed of 3 m/s. What is the kinetic energy of the brick?
Explanation:
it's generally proven that the formula for kinetic energy is k. e = ½mv²
= ½×2×3
=3
if one stand of DNA reads as AATTCCGGATCG, what would the opposite strand bases be?
A ball with a weight of 70 N hangs from a string that is coiled around a 3 kg pulley with a radius of 0.4 m. Both the ball and the pulley are initially at rest. The rotational inertia of the pulley is 0.5mr2 and the ball is released from rest. Calculate the ball's velocity after it falls a distance of 2 meters.
Answer:
v = 6.195 m / s
Explanation:
For this exercise we can use the conservation of energy, for the system formed by the ball and the pulley
starting point. Higher before releasing the system
Em₀ = U = M g h
final point. When the ball has lowered h = 2
Em_f = K = ½ M v² + ½ I w²
the energy is preserved
Em₀ = Em_f
M g h = ½ M v² + ½ I w²
angular and linear velocity are related
v = w r
w = v / r
indicate that the moment of inertia is
I = ½ m r²
we substitute
M g h = ½ M v² + ½ (½ m r²) (v/r) ²
½ v² (M + [tex]\frac{1}{2}[/tex] m) = M g h
v² = [tex]2gh \ \frac{M}{M + \frac{m}{2} }[/tex]
let's calculate
v = [tex]\sqrt{ 2 \ 9.8 \ 2 \ \frac{70}{70 + 1.5} }[/tex]
v = 6.195 m / s