one soil-forming factor is the parent material (earth materials) from which the soil develops; the other four soil-forming factors are

Answers

Answer 1

the other four soil-forming factors are Climate (cl) ,Organisms (o) ,Relief (r)

,Time (t)

What are the factors of soil formation?

Climate affects soil formation through temperature. Accelerate or decelerate a chemical reaction or biological activity. High precipitation forces mineral and organic constituents downward through the profile. This is a process known as leaching. Where annual precipitation is low, evaporation dominates and biological activity is low or non-existent.Plant and animal organisms are important determinants of soil formation. In certain situations, humans have had overwhelming influence on generated soils.Location within the landscape has a significant impact on soil development. Soil at the top of slopes can be subject to water erosion, while water can accumulate at the bottom of the terrain. The connection of soil on the slope is called a catena.The soil goes through stages of development. There are young soils and old or weathered soils. Deeply depleted soils dominate ancient plateaus in the tropics that have been exposed to weathering for very long periods of time. These are classified as FerralSols.Parent material is the geological mother material from which the soil is formed by weathering. Its composition affects the mineral content of the soil. Plants and organisms are sources of organic matter.

Learn more about factors of soil formation from the link below

https://brainly.com/question/1593669

#SPJ4


Related Questions

how weathering, erosion and sedimentation give rise to the morphology of sandy shores

Answers

Weathering, erosion and sedimentation give rise to the morphology of sandy shores by forming the erosion of sandstone rocks, and the deposition of sand.

Weathering is considered to be a process of water moving which is done  through the rocks and making them erosionate, flowing and moving to a river and sediments in the bottom of the sea or a river.

However, resistant to weathering and break down less easily than softer rocks. Sandy shores are said to be formed by erosion of sandstone rocks and deposition of sand by the sea. Thus, weathering, erosion and sedimentation tend to give rise to the morphology of sandy shores.

Hence, weathering is a process which tend to turn the bedrock into smaller particles which are called sediment.

To learn more about morphology here:

https://brainly.com/question/28173904

#SPJ4

PLEASE HELP WILL GIVE 20 POINTS, 5 STAR RATING, AND BRAINLIEST, PLEASE HELP ASAPPP!!!!!, if wrong will report and give a 0 rating on personal account. PLEASE HELPPPP!!!!!

Answers

Answer:

Expansion diffusion

Right from the test and from the answer key!

PLEASE GIVE BRAINLIEST THANK YOU!!!

PLEASE HELP, this was due yesterday i really need help

Answers

Answer:

ask your teacher to email you the  in docs to open them and then just answer the questions

this type of metamorphism tends to occur in regions where massive amounts of sedimentary or volcanic materials accumulate in a subsiding basin, pushing older rocks further into the interior. a. contact b. hydrothermal c. regional d. burial

Answers

Correct Option is D). Burial type/form of metamorphism has a tendency to arise in areas wherein large quantities of sedimentary or volcanic substances gather in a subsiding basin, pushing older rocks similarly into the interior.

Burial metamorphism happens while sediments are buried deeply sufficient that the warmth and strain purpose minerals to start to recrystallize and new minerals to grow, however does now no longer depart the rock with a foliated appearance. As metamorphic strategies go, burial metamorphism takes location at notably low temperatures (up to ~300 °C) and pressures (100s of m depth). To the unaided eye, metamorphic modifications might not be obvious at all.

Regional metamorphism refers to large-scale metamorphism, together with what occurs to continental crust alongside convergent tectonic margins (wherein plates collide). The collisions bring about the formation of lengthy mountain ranges, like the ones alongside the western coast of North America.

Learn more about metamorphism visit : brainly.com/question/14021434

#SPJ4

deposit of blanks in cold climates are evidence of continental drift show that anitartica was once near

Answers

Deposit of Coal in cold climates are evidence of continental drift show that Antarctica was once near

How do coal field is an example of continental drift ?

Coal deposits only mean that Antarctica could have been located on a part of the Earth that was once home to a great deal of life. This is because Antarctica once experienced a tropical climate. , leading to the assumption that it may have been close to the equator.Evidence from fossils, glaciers, and complementary coastlines help show how the plates once came together. Fossils tell us when and where plants and animals existed. The distribution of this fossil has led to the theory that the southern continent was once merged into a supercontinent called Gondwana.Coal beds in Antarctica show that Antarctica was once much warmer and contained large amounts of vegetation.

Learn more about Continental Drift from the link below

https://brainly.com/question/1986260

#SPJ4

Why is coral bleaching a problem?

Answers

Coral reefs act as natural barriers by absorbing the impact of storm surges and waves. Without them, we are forced to rely on artificial seawalls, which are more expensive, and more harmful to the environment to build.

Define the term coral bleaching?

Coral bleaching is important because, after these coral die, reefs hardly regenerate.

Coral populations are declining, making it difficult for them to reproduce and harming the entire reef ecosystems that support both people and wildlife. Some of the greatest biodiverse habitats on the world are supported by coral reefs. The species at the bottom of ocean food web are also supported by them. By destroying links with in food chain and denying some fish other crustacean species a location to reproduce and mature, bleached coral additionally exacerbates the overfishing problem. Anyone who depends on these creatures as their main source of money or protein will run into difficulties. Finally, reef tourism supports hundreds of jobs and generates billions of dollars annually.

Thus, everything is at danger because of bleached coral reefs that lack wonderful marine life.

To know more about the coral bleaching, here

https://brainly.com/question/12553366

#SPJ4

The distance between Newfoundland, Canada, and Ireland is roughly 3,320 kilometers. If the Mid-Atlantic Ridge is spreading at 4 cm/year (0.00004 km/year) in that area, how long ago did the Atlantic Ocean separate Canada from Ireland?​

Answers

83 million years. 3,320/ 0.00004= 83,000,000

Since the two places are 3320 km apart, and the Atlantic ridge is spreading 4 km or 0.00004 km each year I must do 3320÷0.00004 and get 83 million years since it is spreading 0.00004 km each year.

If the Mid-Atlantic Ridge is spreading at 4 cm/year (0.00004 km/year) in that area, then the Atlantic Ocean separates Canada from Ireland took 83 million years, that is 3,320/0.00004=83,000,000.

What is the Mid-Atlantic Ridge?

The Mid-Atlantic Ridge is a mid-ocean ridge located along the floor of the Atlantic Ocean, and part of the longest mountain range in the world. In the North Atlantic, the ridge separates the North American from the Eurasian Plate and the African Plate, north and south of the Azores Triple Junction respectively.

In the South Atlantic, it separates the African and South American plates. The ridge extends from a junction with the Gakkel Ridge northeast of Greenland southward to the Bouvet Triple Junction in the South Atlantic. Although the Mid-Atlantic Ridge is mostly an underwater feature, portions of it have enough elevation to extend above sea level, for example in Iceland. The ridge has an average spreading rate of about 2.5 centimetres (1 in) per year.

The Mid-Atlantic Ridge includes a deep rift valley that runs along the axis of the ridge for nearly its entire length.

Learn more about ridge, here:

https://brainly.com/question/20067486

#SPJ2

Trellis and annular drainage patterns are similar in that they are both structurally controlled. How do they differ? A trellis pattern follows ___.

Answers

An annular pattern follows curving layers around a centre location, and a trellis pattern follows one structure before cutting across a ridge and following another.

A stream is any body of moving surface water, from a small trickle to a powerful river. The drainage basin of a stream is the region from where the stream's water originates. Unless part of the water is able to traverse into a neighbouring drainage basin via groundwater movement, all precipitation (rain or snow) that falls within a drainage basin eventually flows into its stream.

The type of rock underlying and the structures inside that rock have a significant impact on the arrangement of tributaries within a drainage basin (folds, fractures, faults, etc.).

To know more about Rocks, click here:

https://brainly.com/question/19930528

#SPJ4

Wet igneous rock melts at a lower temperature than the dry version of that same rock because.

Answers

Wet igneous rock melts at a lower temperature than the dry version of that same rock because the addition of volatiles in "wet" rocks lowers their melting temperature.

What is volatiles?Volatiles include nitrogen, carbon dioxide, ammonia, hydrogen, methane, sulfur dioxide, water, etc.Volatiles are easily vaporizable substances present in magmas, such as H2O and CO2, whose vapor pressure is high enough that they accumulate in the gas phase that forms.Volatile means that a substance  boils at a low temperature and changes from a liquid to a gas phase. Substances that are gaseous at room temperature are highly volatile.They have high volatility. It can only be considered liquid when exposed to low temperatures or high pressure. Volatility is a statistical measure of the spread of returns for a particular security or market index. In most cases, the higher the volatility, the higher the security risk. Volatility is often measured using the standard deviation or variance between returns of the same security or market index.

To learn more about volatiles from the given link :

https://brainly.com/question/29394588

#SPJ4

What phase would be the earth appear to be in if you were standing on the moon at full moon?.

Answers

Phases of the moon are defined as changes in the shape of the moon that can be seen from the earth's surface. Based on these problems, the phase where we can see the full moon from the earth's surface is the full moon.

Explanation moon phase

Phases of the moon are defined as changes in the shape of the moon that can be seen from the earth's surface. The change in the shape of the moon is caused by the reflection of sunlight on different lunar surfaces. Each phase of the moon takes about a week, so all phases of the moon can occur for approximately 28 days.

The moon has several phases of shape change. Here are the different phases of the moon:

New moon, the position of the moon is located almost parallel to the earth and sun.The first quarter, the position of the moon at a certain angle to the sun and the earth.Full moon, ie the position of the moon is located almost parallel to the earth and the sun, with the position of the earth in the middle.The last quarter, like the first quarter, is the position of the moon at a certain angle to the sun and the earth.

Learn more about phases of the moon at : brainly.com/question/12676209

#SPJ1

The _______ environment represents the single largest habitat on Earth.

Answers

Answer:

deep sea floor is the correct answer

which of the following is NOT one of the 5 themes of geography?
a. Movement b. location c. people d. region

Answers

The 5 themes of geography people

What are the 5 themes of geography?

Location :- Most geographic studies start with knowing the location of a place. Position can be absolute or relative.Place :- A place represents the human and physical characteristics of a place.Human-environment interaction :- This topic discusses human adaptation and modification of the environment. Humans shape landscapes through their interactions with the land. This has both positive and negative effects on the environment.Movement :- People move - a lot! Moreover, ideas, fads, goods, resources, and communication are all travel distances. This theme examines movement and movement between regions of the worldRegions  :- divide the world into manageable units for geographic study. Regions have certain characteristics that unify them and can be formal, functional, or indigenous.

Learn more about themes of geography from the link below

https://brainly.com/question/14433647

#SPJ4

What happens when the s waves encounter the boundary between the lithosphere and asthenosphere?.

Answers

When the waves encounter the boundary Some of the wave energy bounces off the boundary and some passes through the boundary.

What is lithosphere-asthenosphere boundary?

Geophysicists refer to this border as the lithosphere-asthenosphere boundary (LAB), which denotes a mechanical distinction between the layers of the Earth's interior. Chemical and mechanical descriptions of the crust, mantle, and core of the Earth are both possible. Between the warmer, ductile asthenosphere and the lithosphere, which is Earth's cooler, more rigid lithosphere, is the lithosphere-asthenosphere boundary. Despite the fact that it is known to vary depending on the environment, the actual depth of the boundary is still up for discussion and research.

To learn more about lithosphere-asthenosphere boundary

https://brainly.com/question/13201285

#SPJ4

suppose that you were a researcher trying to understand how rising levels of atmospheric co2 might affect ragweed plants, and thus seasonal ragweed allergies. what questions, hypotheses, and predictions might you want to study? complete the flow chart by selecting the hypothesis and predictions that follow from the question you're trying to answer. not all labels will be used.

Answers

Increased atmospheric CO₂ levels can affect ragweed crops:

Hypothesis (1): CO₂ levels affect ragweed pollen productionPrediction (a): Plants grown at higher CO₂ levels produce more pollenHypothesis (2b): CO2₂ levels affect the concentration of allergen protein in ragweed pollenPrediction (c): Plants growing at higher CO₂ concentrations produce higher levels of allergens.

This question completes the diagram, let's see at the picture.

What is the difference between prediction and hypothesis?

Differences between hypotheses and predictions, including Hypotheses, are only temporary conjectures that can be tested by scientific methods, hypotheses must be logical and by facts. Whereas a prediction is a statement made in advance about what is expected to happen next, in the order of events.

Learn more about prediction and hypothesis here https://brainly.com/question/551449

#SPJ4

Why are seismologists interested in the possibility of the two faults being connected together?.

Answers

Seismologists are interested in the possibility of the two faults being connected because it can pose a risk of earthquakes with a larger magnitude.

What impact can be caused by connecting two faults?

According to the research result of seismologists which was published in an article on the official website of weather.com, the impact that can result from the connection of the two faults is the possibility of an earthquake with a larger magnitude at some point in the future. This refers to the findings of seismologists from the University of California Berkeley who have conducted research using satellite data for 20 years which later found that there are two Californian Fault Lines, especially the Calaveras Fault and Hayward Fault which are connected.

According to Estelle Cahussard, lead researcher at the University of California Berkeley, the connection of these two faults has the potential for an earthquake if a rupture occurs. It is more likely that an earthquake will occur in California´s Bay Area then it can also be felt in nearby cities. The possibility related to the magnitude of the earthquake magnitude when the two faults are connected depends on where the rupture goes so that it can result in around 7+ earthquakes.

Furthermore, research is carried out to estimate the magnitude of certain points along the fault line so that security preparations can be adjusted for the safety of people.

In conclusion, seismologists are interested in the possibility of the two faults being connected because it can pose a risk of an earthquake with a larger magnitude and further research is needed to make adjustments to security preparations to save people from the possibility of this disaster.

Read more about faults here:

https://brainly.com/question/25762503

#SPJ4

At which type of boundary do lithospheric plates collide? question 7 options: gravitational boundaries contour boundaries convergent boundaries convection boundaries

Answers

The correct answer is option C.

The lithospheric plates collide at the a convergent plate boundary.

What are convergent plate boundaries?

Convergent boundaries or convergent plate plate boundaries are the regions where two lithospheric plates or plate tectonics interact with each other.

The phenomenon of lithospheric plates collision occurs at the subduction zones where pone plate moves under the other plate.

In general, as a result of subduction trenches are formed which are several meters in depth.

To put it simply, when two plate tectonic converge with each other, the dense plate slides down the upper less dense plate and results in the formation of trenches also called dipping zones.

If you need to learn more about lithospheric plates click here:

https://brainly.com/question/28203855

#SPJ4

What happens due to divergent plate movement? question 2 options: mountain formation volcano eruption seafloor spreading earthquakes

Answers

Answer:

Volcano eruption and seafloor spreading

Rank the following in order to describe the formation of a natural bridge, placing the beginning event in top and the final event on bottom. 1.A meandering stream carves a curved canyon from a landscape.
2.Entrenched meanders are formed as the stream erodes into deeper layers of rock
3.The river erodes laterally to make rock between entrenched meanders thinner
4.The river cuts through ridges between meanders and alters its original path
5.A natural bridge is formed along with an abandoned meander

Answers

The correct rank in order to describe the formation of a natural building is

1.A meandering stream carves a curved canyon from a landscape, then

2.Entrenched meanders are formed as the stream erodes into deeper layers of rock, then

3.The river erodes laterally to make rock between entrenched meanders thinner, then

4.The river cuts through ridges between meanders and alters its original path, and then

5.A natural bridge is formed along with an abandoned meander

So, correct rank of statements is 1, 2, 3, 4, 5

There are the three dimensions that are involved in the planning of any mega project like the bridge. This is considered as the initial step towards the planning of structures, that would finally bring up with the project that would be advantageous to the community in all the aspects. The three dimensions are:

Scientific DimensionSocial DimensionTechnological Dimension

Hence, 1, 2,3,4,5 is the correct order to describe the formation of a natural bridge.

To know more about bridges, visit here:

https://brainly.com/question/540495

#SPJ4

mexico won its independence from spain in _. many people in the united states hoped that this development would mean better trade between the united states and settlements along the rio grande. in particular, american traders wanted to conduct trade with_

Answers

In 1821, Mexico reclaimed its independence from Spain. Many Americans believed that this development would improve commercial relations between their country and communities along the Rio Grande. American traders in particular desired to deal with Sante Fe.

The Treaty of Córdoba was signed on August 24, 1821, by Spanish Viceroy Juan de O'Donoj, approving a plan to transform Mexico into a sovereign constitutional monarchy. Iturbide was named the emperor of Mexico in 1822 since there had been no discovery of a Bourbon king to rule Mexico.

The Rio Grande (Rio Bravo), which forms the border between Mexico and the United States, rises at the Continental Divide in the San Juan Mountains of southern Colorado, United States, and flows through the center of New Mexico to the border between Texas and Chihuahua.

To learn more about Mexico

https://brainly.com/question/11374711

#SPJ9

Fossils present in ______ layers of rock are older, according to the principle of superposition.

Answers

Fossils present in lower layers of sedimentary rock are older, according to the principle of superposition.

According to the principle of superposition, in a sequence of sedimentary rocks that has not been distorted, each layer of rock is older than the layer above it and younger than the layer below it. As a result, the youngest rocks are at the top and the oldest rocks are at the bottom of a series.

One of the geological laws that geologists use to calculate the relative ages of rock strata or layers, is the law of superposition. According to this theory, rock layers are stacked or deposited one on top of the other. The bottom will have the oldest rock strata and the top will have the youngest.

For more questions like Fossils click the link below:

https://brainly.com/question/22197471

#SPJ4

walrus feed on ______.

Answers

Answer:

Clams, snails, mollusks, sea cucumbers, crabs,

Explanation

Answer:  shellfish, worms, crabs, etc. and perhaps some fishes.

Explanation:

They live in and on the beach so they eat what is closest to the shore.

Lithospheric plates move in the asthenosphere due to the rising and sinking of materials.

Answers

First, the decomposition of radioactive elements causes heat in the interior part of the Earth. Then heat moves to the core. After that, heat slowly rises to the mantle and creates a convection current. Then lithospheric plates move in the asthenosphere due to the rising and sinking of materials. And finally, the process repeats as a cycle. That is the correct order of how convection current happens.

What is Convection Theory?

Convection Theory was put forward by Arthur Holmes and Harry H. Hess and then further developed by Robert S. Dietz.

The evidence underlying the Convection theory is the result of research on the age of the seabed which proves that the farther from the mid-ocean ridge, the older the rock is. This means that there is a movement originating from the mid-oceanic ridge region in the opposite direction due to the influence of convection currents originating from the layer beneath the Earth's surface.

Other evidence is the presence of mid-oceanic ridges, such as the mid-Atlantic ridge and the Pacific-Atlantic ridge.

Learn more about Mid-Oceanic Ridge here brainly.com/question/24450451

#SPJ4

How do foreign recessions and depressions affect the Maquiladora industry?

Answers

Maquiladoras have not only become an increasingly significant component of the Mexican economy, they are also an important part of U.S. corporate strategy in producing competitively priced goods and services in the world marketplace.

Even though recessions and low-wage competition have changed the behavior of the industry in recent years, maquiladoras continue to shape regional trade along the U.S.-Mexico border.

What is Maquiladora industry?

The term “maquila” or “maquiladora” refers to a manufacturing facility that is a part of the maquiladora industry, a driving force in Mexico manufacturing. Maquiladora in Mexico first operated under a specific government program known as the Maquila Program, created in 1965 to facilitate industrialization on the United States-Mexican border.

A maquiladora is a low-cost manufacturing operation in Mexico that manufactures goods for export to the United States or Canada.

What is recession and depression?

A recession is widespread economic decline that lasts for at least six months. A depression is a more severe decline that lasts for several years. For example, a recession lasts for 18 months, while the most recent depression lasted for a decade. There have been 33 recessions since 1854.

Learn more about maquiladora industry here:

https://brainly.com/question/15022896

#SPJ1

As an astronaunt travels from the surface of the earth to a postion that is four times as far away from the center of the earth, the astronaut’s.

Answers

An Astronaut travels from the surface of the earth to a position that is four times as far away from the center of the earth, the astronaut’s mass remains same.

What is an Astronaut?An astronaut is a person who has been trained, equipped, and deployed by the manned space program to serve as a commander or crew member aboard a spacecraft. Although the term is generally reserved for professional space travelers, leaving the earth's surface, the term may apply to anyone traveling to space, including scientists, politicians, journalists, and tourists."Astronaut" strictly applies to all human space travelers, regardless of nationality. However, cosmonauts deployed by Russia or the Soviet Union are usually known  as cosmonauts. The relatively recent development of manned spaceflight  by China gave rise to  the term taikonaut, but its use is somewhat informal and its origins are unknown.Since 1961, 600 astronauts have gone to space. Until 2002, astronauts were sponsored and trained only by governments, either  military or private space agencies. His privately funded SpaceShipOne suborbital flight in 2004 created a new category of astronaut professional astronaut.

To learn more about Astronaut from the given link :

https://brainly.com/question/11244838

#SPJ4

he differences among the three types of seismic waves: p-waves, s-waves and surface waves with respect to the pattern of motion and speed. which one causes the greatest destruction to buildings? why?

Answers

The three types of seismic waves that cause the greatest damage to buildings are P waves, which have a high speed so they can damage buildings.

EEkplantion

Seismic waves are caused by the sudden movement of materials within the Earth, such as slip along a fault during an earthquake.

There are three basic types of seismic waves – P-waves, S-waves and surface waves. P-waves and S-waves are sometimes collectively called body waves.

Learn more about

seismic

Which of the following best describes the difference between differential stress and confining pressure?

a. Under confining pressures, the stresses on the sides are greater than the force of gravity. Stresses are the same on all sides for differential stress.
b. In differential stress, the stresses on the sides are greater than the force of gravity. Stresses are the same on all sides for confining pressure.
c. In differential stress, the force of gravity is higher than in confining stress.
d. Both confining pressure and differential stress have stresses applied to a rock in one direction, which is greater than the force of gravity as a whole.
e. In confining stress, the force of gravity is higher than in differential stress.

Answers

Using the concepts of pressure, we got that following best describes the difference between differential stress and confining pressure is option b) In differential stress, the stresses on the sides are greater than the force of gravity. Stresses are the same on all sides for the confining pressure.

Confining presssure = stress applied uniformly in all the directions Differential stress = unequally applied stress in different the directions.

In differential stress, the stresses on the sides are actually greater than the force of gravity. Stresses are the same on all sides for the confining pressure.

Hence, the option which  best describes the difference between differential stress and confining pressure is b)In differential stress, the stresses on the sides are greater than the force of gravity. Stresses are the same on all sides for confining pressure

To know more about pressure, visit here:

https://brainly.com/question/15175692

#SPJ4

What are rocks used for?​

Answers

Answer:

to find fossils I think hope Thia helps

8. folds are examples of deformation while faults or fractures are types of deformation. a. brittle, ductile b. ductile, brittle the axial trace (also known as fold axis) is the imaginary line that divides a fold in half. notice when the units are dipping away from each other they form a structure called an antiform. notice when the units on either side of the axial trace are dipping towards each other, they form a synform. 9. anticlines have the unit in the middle of the fold. a. oldest b. youngest 10. synclines have the unit in the middle of the fold. a. oldest b. youngest

Answers

b)Folds are examples ductile of deformation while faults or fractures are types brittle of deformation.

Folds are bends in rocks caused by compressional pressures. Tensional forces along which rock displacement occurs cause deformation. When compressional force is applied to ductile or flexible rocks, folding results.

Rocks folded into an arching upward and dipping away from the fold's center are called anticlines. The youngest rocks are draped over the oldest, which are located in the center of an anticline. An adome is a structure formed when rocks arch upward to form a circle. So the correct option is a.

A syncline is a fold in the ground where the oldest rocks are on the outside and the youngest rocks are on the inside. A basin is created when rocks bend downward in a circular pattern. So the correct option is b.

For more questions like Fold click the link below:

https://brainly.com/question/29416697

#SPJ4

To what extent do urban areas in lower income countries (LICs) or newly emerging economies (NEEs) provide social and economic opportunities for people?

Answers

Urban areas in lower income countries (LICs) or newly emerging economies (NEEs) provide social and economic opportunities for people. Consider the availability of work prospects in industries like manufacturing and construction, as well as in areas with access to healthcare, transportation, and education. Socially, metropolitan regions frequently provide better housing, sanitization practices, and utilities like water and electricity.

For instance, occupations and employment prospects are typically more plentiful, consistent, and reachable in metropolitan locations. In truth, those who are rich in society tend to perceive or have access to LIC's benefits more frequently. Consider the cost of living (which is greater in an urban location), the strain that an influx of people may place on infrastructures and employment possibilities, the prevalence of disease, and the quality and sanitation of the water supply. As a result, there is an increased level of social unrest, violence, and poverty.

Learn more about Social unrest here:

https://brainly.com/question/28000642

#SPJ1

what country is it from worldle guess the country

Answers

Answer:

India?

Explanation:

Correct Answer:
Denmark.

Explanation:
Denmark has three main islands: Funen (where the capital Copenhagen is situated), Zealand (most densely populated) and North Jutland Island. In this picture, we can see the three main islands and the mainland (where Denmark share a border with Germany).
Other Questions
What kind of transformation is illustrated in this figure?O rotationO dilationO translationO reflection Jeremy has 2 bags with 3 marbles in each bag Help.What would the graph look like if all of your classmatespoints were shown along with yours? what is the main driving force behind the use of all forms of technology, including social media, at work? beatrice invests $1,000 in an account that pays 5 percent simple interest. how much more could she have earned over a period of 10 years if the interest had compounded annually? group of answer choices $121.67 $117.09 $128.89 $135.97 $132.45 A cable exerts a constant upward tension of magnitude 1.38 104 N on a 1.20 103 kg elevator as it rises through a vertical distance of 2.50 m.(a)Find the work done by the tension force on the elevator (in J). J(b)Find the work done by the force of gravity on the elevator (in J). J the company buys coasters from one supplier. all amounts in accounts payable on december 1 are owed to that supplier. the inventory on december 1 consisted of 1,000 coasters, all of which were purchased in a batch on july 10 at a unit cost of $0.50. college coasters records its inventory using perpetual inventory accounts and the fifo cost flow method. what is the wavelength of 1.28x10^17HZ What is the wavelength (in nm) of the photon absorbed for a transition of an electron from initial=1 that results in the least energetic spectral line in theultraviolet series of the H atom? Round your answer to 4 significant figures. The product development team at hanson manufacturing has been developing a new idea for a faster production process. They have gone through the screening process and now, based on the product development process, the team is ready to undertake?. American expansionists supported imperialism because they believeda. they needed to stop foreigners from entering the USb. it would anger the progressives and stop their reformsc. it would allow the US to spread its superior cultured. they could force the Europeans out of Africa Write the condensed ground-state electron configuration of the transition metal ion mn2+. james madison: a. opposed the idea of a strong national government. b. urged an expansion of public liberty. c. constructed the constitution of the united states of america d. played no role at the constitutional convention. When his father died, decided to continue the war with the Greeks. He spent 10 years preparing his army and navy to who were known fo return to Greece. The Greeks, however, were prepared for the Persians to return. They united with the their military skill. After the Battle of vthe Persians lost and were forced to leave Greece. which of the following features of salmonella prevent it from being phagocytosed? which of the following features of salmonella prevent it from being phagocytosed? fimbriae invasins flagella Write a C++ program that creates a word-search puzzle game where the user should find the hidden words in a square array of letters. Your program should first read from the user their choice for the game: a) easy, b) medium, c) hard, d) exit the game. If the user selects easy, then the 6x6 puzzle, shown in Figure 1, will be generated and displayed to the user. If the user selects medium, then the14 x 14 puzzle shown in Figure 2 should be generated and displayed and lastly, if the user selects the hard choice, the program should generate a random puzzle, filling the square array of 20 x 20 using random characters/words. Then your program should repeatedly read from the user, a word to be searched for in the puzzle, the row and column number where the word starts from and which orientation to search for. The words can be searched vertically (top to bottom), horizontally (left to right), diagonally (upper left to lower right) and diagonally (upper right to lower left). The program should check if the column and row number given by the user are inside the puzzle (array) boundaries, otherwise should display an error message and ask the user to enter another position. For each word the user inputs, the 2program should display whether the word was found or not. The program should stop reading words when the user will press X and then the total number of found words will be displayed to the user.The program should repeatedly display the game menu until the user will select to exit the game Kyle is studying how language abilities change throughout childhood, and kelly is studying cognitive changes in late adulthood. Both kyle and kelly are conducting studies in which area of psychology?. Order these numbers from least to greatest.2.8, 2.5081, 1.935, 2.582.8 what was the purpose of the new deal? which fico credit score would represent the least risky borrower? multiple choice 400 825 625 550 700