please help !! A golf ball is hit into the air from a platform located 6 meters above the ground. The graph represents the height above the ground of the golf ball as a function of time.

Part A: What is the maximum height, in meters, the golf ball reaches before hitting the ground? (blank) meters

Part B:Which of the following statements describe the golf ball? Select TWO that apply.

A.)At 0 seconds, the golf ball is on the ground.

B.)The golf ball is in the air for a total of 4 seconds.

C.)The golf ball is at a height of 6 feet 2 seconds after it was hit.

D.)Between 1 and 3 seconds, the ball is falling towards the ground.

Answer:

64 square cm

Step-by-step explanation:

(I pulled this out of the comments in case someone else needs this answer. Easier to see as an answer than as comments in the app)

Area 2 is easier, so we’ll start with that one. Area of a rectangle is length x width.

8 x 6 = 48 square cm

Area 1 is a triangle, so the formula is 1/2(base)(height). The height of the triangle is 8, because it’s the same as the base of the rectangle. The base of the triangle is 4, because we can subtract the 6 from the rectangle from the total side length of 10. Does that make sense?

So 1/2 (4)(8)= 1/2(32) = 16 square cm

Then we add 16 + 48 = 64 square cm

Answer:

Step-by-step explanation:

X-intercept means y-coordinate of 0:

6x +2×0 = 12

6x = 12

  x = 2         ← x-coordinate

Y-intercept means x-coordinate of 0:

6×0 + 2y = 12

2y = 12

  y = 6         ← y-coordinate

Answer:

Yes, the fraction are equivalent

Step-by-step explanation:

Fraction shaded by candy = 2/4

Fraction shaded by Hershel = 1/2

If candy's fraction of 2/4 is reduced to it's lowest term ;

2 /4 = 1 /2 ; we also obtain the same fraction obtained by Hershel.

Hence, 2/4 is equivalent to 1/2

Adding a single subject that is way above the median to a sample with a very large sample size is likely to have a minimal impact on the overall distribution and statistics of the sample.

When the sample size is very large and the distribution of the statistic is approximately normal, the Central Limit Theorem states that the distribution of the sample mean approaches a normal distribution, regardless of the underlying population distribution. This means that the sample mean is less sensitive to individual extreme values.

If a single subject is added to the sample that is way above the median, it will have a relatively small effect on the overall sample mean. This is because the impact of a single extreme value diminishes as the sample size increases.

When adding a single subject that is way above the median to a sample with a very large sample size, the effect on the overall distribution and statistics of the sample is expected to be minimal. The large sample size ensures that the sample mean remains robust and less influenced by individual extreme values. Therefore, the addition of a single subject with a very high value is unlikely to significantly alter the characteristics of the sample distribution or the calculated statistics such as the mean or standard deviation.

To know more about median , visit

https://brainly.com/question/26177250

#SPJ11

A one-sided significance test gives a P-value of .02. From this we can conclude that we can reject the null hypothesis with 98% confidence.

Here’s why: In statistical hypothesis testing, the p-value is the probability of obtaining a test statistic at least as extreme as the observed value, assuming that the null hypothesis is true. If the p-value is less than or equal to the significance level (α), the null hypothesis can be rejected. Conversely, if the p-value is greater than the significance level, there is insufficient evidence to reject the null hypothesis. Since a one-sided significance test was performed, we are only interested in the probability that the test statistic will fall in one tail of the distribution.

Thus, the p-value is the probability of obtaining a test statistic as extreme as the observed value in one tail of the distribution. If the p-value is .02, this means that there is a 2% chance of obtaining a test statistic as extreme or more extreme than the observed value if the null hypothesis is true. Since the p-value is less than the standard significance level of .05, we can reject the null hypothesis with 98% confidence. This is because we can be 98% confident that the true population parameter falls in the alternative hypothesis range.

know more about null hypothesis

https://brainly.com/question/30821298

#SPJ11

Using the Trapezoidal Rule with n = 12, the approximation is T12 = -15.6667. Using the Midpoint Rule with n = 12, the approximation is M12 = -92. Using Simpson's Rule with n = 12, the approximation is S12 = -155.7778. So T12 =-15.6667, M12 =-92, S12 = -155.7778.

To approximate the integral using numerical methods, we'll use the Trapezoidal Rule, Midpoint Rule, and Simpson's Rule with n = 12.

Using the Trapezoidal Rule, the approximation is given by:

T12 = h/2 * [f(a) + 2(f(x1) + f(x2) + ... + f(x11)) + f(b)]

where h = (b - a)/n and xi represents the equally spaced points between a and b.

Using the Midpoint Rule, the approximation is given by:

M12 = h * [f(x1/2) + f(x3/2) + ... + f(x23/2)]

where xi/2 represents the midpoints between xi-1 and xi.

Using Simpson's Rule, the approximation is given by:

S12 = h/3 * [f(a) + 4(f(x1) + f(x3) + ... + f(x11)) + 2(f(x2) + f(x4) + ... + f(x10)) + f(b)]

Now, let's calculate the approximations:

For T12:

h = (2 - 4)/12 = -1/3

T12 = (-1/3)/2 * [4 + 2(4 + 2 + ... + 4) + 2]

T12 = -1/6 * [4 + 2(4*11) + 2]

T12 = -1/6 * [4 + 88 + 2]

T12 = -1/6 * 94

T12 = -15.6667

For M12:

h = (2 - 4)/12 = -1/3

M12 = (-1/3) * [4 + 4*3 + 4*5 + ... + 4*23]

M12 = -1/3 * [4 + 12 + 20 + ... + 44]

M12 = -1/3 * [4 + 12 + 20 + ... + 44]

M12 = -1/3 * 276

M12 = -92

For S12:

h = (2 - 4)/12 = -1/3

S12 = (-1/3)/3 * [4 + 4*4 + 2(4 + 4*3 + 4*5 + ... + 4*11) + 2(4 + 4*2 + 4*4 + ... + 4*10) + 2]

S12 = (-1/9) * [4 + 16 + 2(4 + 12 + 20 + ... + 44) + 2(4 + 8 + 16 + ... + 40) + 2]

S12 = (-1/9) * [4 + 16 + 2(276) + 2(220) + 2]

S12 = (-1/9) * 1402

S12 = -155.7778

Therefore, the approximations are:

T12 = -15.6667

M12 = -92

S12 = -155.7778

To know more about Trapezoidal Rule refer here:

https://brainly.com/question/30401353#

#SPJ11

Im pretty sure the answer is A but if not then it is C

This is bcuz B doesn’t make sense because the graph doesn’t say anything close to 100 rides and D doesn’t make sense either.

Hope this helped.

Answer:

$5829.57

Step-by-step explanation:

Annually compounding interest formula: [tex]PV(1+i)^t[/tex]

5000(1+.0525)^3

5829.567266

which rounds to: 5829.57

Answer:

y = $2.80x

Step-by-step explanation:

Based in the information given :

Cost per gallon = $2.80

Number of gallons = x

The total cost, y which is the total cost of x gallons of gas will be :

Cost per gallon * number of gallons

$2.80 * x

Hence,

y = $2.80x

Answer:

I don't know how to do it the subject

The mean absolute deviation in the given situation, where the average number of text messages students send is within 100 messages of the mean of 500 messages per day, can be calculated.

Mean absolute deviation (MAD) measures the average distance between each data point and the mean of the data set.

In this case, the average number of text messages sent by students is 500 messages per day.

Since the average is within 100 messages of the mean, we can assume a range of 400 to 600 messages.

To calculate the MAD, we need to determine the deviation of each data point from the mean. In this case, the deviations can range from -100 to 100 messages.

Since the data points are evenly distributed around the mean, the sum of these deviations will be zero.

However, to calculate the absolute deviation, we take the absolute values of the deviations.

Considering the range of -100 to 100 messages, the absolute deviations for each data point would be 100, 99, 98, ..., 2, 1, 0, 1, 2, ..., 98, 99, 100.

The average absolute deviation would be the sum of these absolute deviations divided by the total number of data points, which is 201 (from -100 to 100 inclusive).

Therefore, the mean absolute deviation in this situation is the average of these absolute deviations, which can be calculated as (100 + 99 + 98 + ... + 2 + 1 + 0 + 1 + 2 + ... + 98 + 99 + 100) / 201.

To learn more about mean absolute deviation visit:

brainly.com/question/32035745

#SPJ11

4020

you're supposed to multiply the length value by 1760

:P

A The null and alternative hypotheses in this case are:

Null hypothesis: H_o: μ ≥ 11

Alternative hypothesis: H_A: μ < 11

B We have statistically significant evidence to conclude that the setting results in less than 11% kernels unpopped.

C The t-statistic is -2.94.

d) The p-value is 0.004.

a) In this case, the company has made a Type I error. This is when the null hypothesis is rejected, even though it is true. In this case, the company would be rejecting the hypothesis that the setting results in less than 11% kernels unpopped, even though it is actually true. The consequence of this would be that the company would be losing money on refunds for popcorn that is not actually defective.

b) In order to answer this question, we need to calculate the t-statistic and the p-value.

The t-statistic is calculated as follows:

t = (x - μ) / (s / √n)

Substituting these values into the formula for the t-statistic, we get:

t = (6.7 - 11) / (3.5 / √8)

= -2.94

The p-value is the probability of obtaining a t-statistic that is at least as extreme as the one we observed, assuming that the null hypothesis is true. In this case, the p-value is 0.004.

c) The t-statistic is -2.94.

d) The p-value is the probability of obtaining a t-statistic that is at least as extreme as the one we observed, assuming that the null hypothesis is true. In this case, the p-value is 0.004.The p-value is 0.004.

Learn more about hypothesis on

https://brainly.com/question/606806

#SPJ4

Answer:

174.95

Step-by-step explanation:

Volume=πr^2h

3.142 * (4.5÷2)^2 *11

=174.95

A triangle with a 90° angle is called a right triangle.

Option B is the correct answer.

A triangle is a 2-D figure with three sides and three angles.

The sum of the angles is 180 degrees.

We can have an obtuse triangle, an acute triangle, or a right triangle.

We have,

Acute triangle:

The angle is less than 90 degrees.

Right triangle:

The angle is 90 degrees.

Equilateral triangle:

All sides of the triangle are equal.

Isosceles triangle:

Two sides of the triangle are equal.

Thus,

A triangle with a 90° angle is called a right triangle.

Learn more about triangles here:

https://brainly.com/question/25950519

#SPJ3

Answer:

62

Step-by-step explanation:

divide lang yan.piste kasi bat kailangan 20 letters

Answer:

la respuesta es la D

Step-by-step explanation:

la velocidad es constante

The result of 5,626 divided by 62 is approximately 90 with a remainder of 48.

To calculate the division of 5,626 by 62, you can use long division. Here are the steps:

          90

   ______________

62 | 5,626

      - 4,96

        -----

          1,66

          1,55

          ----

            110

             62

            ----

             48

Therefore, the result of 5,626 divided by 62 is approximately 90 with a remainder of 48.

Learn more about division click;

https://brainly.com/question/2273245

#SPJ1

The type I error occurs when the null hypothesis is rejected, but in reality, the null hypothesis is true. In this case, the null hypothesis is "Carmin believes that her chemistry exam will only cover material from chapters four and five." The correct statement that corresponds to the type I error is option C: "Carmin believes that her chemistry exam will only cover material from chapters four and five when, in fact, it will not cover material only from chapters four and five."

A type I error is a false positive result, where the null hypothesis is incorrectly rejected even though it is true. In this scenario, if carmin believes that her chemistry exam will only cover material from chapters four and five, but in reality, the exam includes additional material beyond chapters four and five, it would be a type I error. Option C describes this situation, where Carmin believes the exam will cover only chapters four and five, but it actually includes material from other chapters.
Options A, B, and D do not correspond to a type I error because they either describe the correct belief or a different scenario where the null hypothesis is true.Therefore, option C represents the type I error in this context.

learn more about null hypothesis here

https://brainly.com/question/19263925



#SPJ11

The equation of the line that passes through (-8, 6) and parallel to the line whose equation is 8x - 3y -4 = 0, is 3y - 8x + 46 = 0

First, we shall obtain the slope of the line. Details below:

8x - 3y -4 = 0

Rearrange the equation with y as the subject, we have

8x - 4 = 3y

y = 8x/3 - 4/3

Thus,

Slope (m₁) = 8/3

Recall,

Slope of parallel lines are equal.

Thus,

The slope of line, is given as:

m₂ = m₁ = 8/3

Now, we shall obtain the equation of line. Details below

y - y₁ = m₂(x - x₁)

y - 6 = 8/3(x - (-8))

y - 6 = 8/3(x + 8)

Multiply through by 3

3(y - 6) = 8(x + 8)

Clear bracket

3y - 18 = 8x - 64

Rearrange

3y - 8x - 18 + 64 = 0

3y - 8x + 46 = 0

Thus, the equation of line is 3y - 8x + 46 = 0

Learn more about coordinate geometry:

https://brainly.com/question/20712656

#SPJ4

Answer: answer is D

Step-by-step explanation:

because science is more important than life

Answer:

The correct option is;

3. Theories need to undergo peer-review

Step-by-step explanation:

Within the scientific community, a theory has to be peer-reviewed by subject matter experts before it can be normally considered a valid theory. The peer-review process is one in which another scientific expert on the subject analyze, study, and repeat the experiments in the same conditions as stated in a publication submitted to a journal as a theory. The peer-review process aims to confirm the theory. A discovery which survives the peer review process will be considered a scientific theory and can then be expanded upon.

Answer:

[tex] V_1 : V_2= 2197 : 729[/tex]

Step-by-step explanation:

Let the volumes of both the spheres be [tex] V_1, \:V_2[/tex] and their radii be [tex] r_1, \:r_2[/tex] respectively.

[tex] \huge r_1 : r_2= 13 : 9[/tex] (given)

[tex] \implies\huge \frac{r_1}{r_2}= \frac{13}{9}.....(1)[/tex]

[tex] \huge \frac{V_1}{V_2}=\frac{\cancel {\frac{4}{3} \pi} r_1^3}{\cancel {\frac{4}{3} \pi} r_2^3}[/tex]

[tex] \huge \frac{V_1}{V_2}=\frac{ r_1^3}{r_2^3}[/tex]

[tex]\huge \frac{V_1}{V_2}=\bigg(\frac{ r_1}{r_2}\bigg) ^3..... (2)[/tex]

From equations (1) & (2), we have:

[tex]\huge \frac{V_1}{V_2}=\bigg(\frac{13}{9}\bigg) ^3[/tex]

[tex] \huge \frac{V_1}{V_2}=\frac{2197}{729}[/tex]

[tex] \huge \therefore V_1 : V_2= 2197 : 729[/tex]

Thus, the ratio of the volumes of two spheres would be 2197 : 729.

Answer:

2197:729

hope it helps

please mark brainliest

The position function becomes s(t) = 2t³ + 2t² + 9t + 8. Finally, we substitute t = 15 into the position function to obtain the particle's position at time t = 15:s(15) = 2(15)³ + 2(15)² + 9(15) + 8 = 3378. The particle's position at time t = 15 is 3378 units.

Given, the acceleration of the particle is a(t) = 12t + 4 and the particle's position and velocity at t = 0 are s(0) = 8 and v(0) = 9 respectively. To find the particle's position at time t = 15, we need to integrate the acceleration function and use the initial conditions to determine the constants of integration as follows: Integrating the acceleration function yields the velocity function:v(t) = ∫a(t) dt = ∫(12t + 4) dt = 6t² + 4t + C where C is the constant of integration. Using the initial condition that v(0) = 9, we have:9 = 6(0)² + 4(0) + C => C = 9.

Therefore, the velocity function becomes: v(t) = 6t² + 4t + 9 Now, we integrate the velocity function to obtain the position function as follows: s(t) = ∫v(t) dt = ∫(6t² + 4t + 9) dt = 2t³ + 2t² + 9t + D where D is the constant of integration. Using the initial condition that s(0) = 8, we have:8 = 2(0)³ + 2(0)² + 9(0) + D => D = 8Therefore, the position function becomes: s(t) = 2t³ + 2t² + 9t + 8Finally, we substitute t = 15 into the position function to obtain the particle's position at time t = 15:s(15) = 2(15)³ + 2(15)² + 9(15) + 8 = 3378. Therefore, the particle's position at time t = 15 is 3378 units.

know more about velocity function,

https://brainly.com/question/29080451

#SPJ11

Answer:

Step-by-step explanation:

The work done by an object can be found by using the formula

workdone = force × distance

From the question we have

workdone = 4.5 × 5

We have the final answer as

Hope this helps you

28.26 sq. Ft is the area of the table top

Answer:

$1.25

Step-by-step explanation:

10/8 =1.25

Answer:

$1.25

Step-by-step explanation:

just divided 10 with 8

In the given problem, we start by deriving expressions for the marginal propensity to consume (MPC), average propensity to consume (APC), marginal propensity to save (MPS), and average propensity to save (APS) using the consumption function and income function.

Deriving expressions for MPC, APC, MPS, and APS:

Using the consumption function C = C₁ + bY and the income function Y = C + S, we can derive the following expressions:

MPC (Marginal Propensity to Consume) = ΔC / ΔY

APC (Average Propensity to Consume) = C / Y

MPS (Marginal Propensity to Save) = ΔS / ΔY

APS (Average Propensity to Save) = S / Y

Deducing expressions for MPS and APS:

Given the consumption function C = 50 + 0.5Y, we can deduce the expressions for MPS and APS as follows:

MPS = ΔS / ΔY = Δ(Y - C) / ΔY = 1 - MPC

APC = C / Y = (50 + 0.5Y) / Y

APS = S / Y = (Y - C) / Y = 1 - APC

Confirming MPS > APS:

To confirm that MPS is greater than APS, we evaluate them at Y = 20:

MPS = 1 - MPC = 1 - 0.5 = 0.5

APC = C / Y = (50 + 0.5 * 20) / 20 = 52.5 / 20 = 2.625

APS = 1 - APC = 1 - 2.625 = -1.625

Since APS is negative and MPS is positive, it is evident that MPS > APS.

Derivatives of the given functions:

a) AC = Q² - 20Q + 120

The derivative of AC with respect to Q is: d(AC)/dQ = 2Q - 20

b) TR = 50Q - Q²

The derivative of TR with respect to Q is: d(TR)/dQ = 50 - 2Q

Determining intervals of increase or decrease:

a) AC = Q² - 20Q + 120

The quadratic function AC has a positive coefficient for the quadratic term (Q²), indicating a U-shaped curve. It opens upward, which means it is increasing for Q values less than the vertex of the parabola (Q = 10) and decreasing for Q values greater than the vertex.

b) TR = 50Q - Q²

The quadratic function TR has a negative coefficient for the quadratic term (Q²), indicating a downward-opening parabola. It is decreasing for all values of Q.

In summary, we derived expressions for MPC, APC, MPS, and APS using the consumption function and income function. We confirmed that MPS > APS by evaluating them at a given income level.

Learn more about quadratic function here:

https://brainly.com/question/18958913

#SPJ11

The vector [1, 1, 1]ᵀ as it is symmetrical to the ordinary vector. Thus, "[1, 1, 1]T" serves as the foundation for the line p.

We can rewrite the plane's equation as a matrix equation to find the matrix A whose nullspace matches the given plane. The plane's equation is as follows:

x - 4y + 3z = 0

We can revise it in lattice structure as:

Where [A] is a 1x3 matrix and [x, y, z]T is a column vector, [A] = [0]. The rows of the matrix [A] will serve as the equation's coefficients for x, y, and z due to the equation's homogeneity and linearity.

As a result, matrix A is:

[A] = [1, -4, 3] We must solve the equation A * x = 0, where x is a column vector, in order to determine the nullspace's basis. For this situation, we really want to address:

We can represent it as a system of equations: [1, -4, 3,] [x, y, z]T = [0].

x - 4y + 3z = 0

To track down the reason for the nullspace, we settle the arrangement of conditions and express the arrangement concerning boundaries. Let's figure out the system:

x = 4y - 3z

Picking y = t (a boundary), we can revamp the arrangement as:

The nullspace of matrix A is spanned by the vector [4, 1, 1]T, so "[4, 1, 1]T" serves as the foundation for the nullspace of A. Since x = 4t, y = t, and z = t,

Presently, to find the reason for the line p⊥ that is opposite to p, we know that any vector in p⊥ is symmetrical to any vector in p. Hence, the reason for p⊥ can be found by finding a vector that is symmetrical to the ordinary vector of p (which is [1, - 4, 3]ᵀ).

We can pick the vector [1, 1, 1]ᵀ as it is symmetrical to the ordinary vector. Thus, "[1, 1, 1]T" serves as the foundation for the line p.

To know more about matrix equation refer to

https://brainly.com/question/27572352

#SPJ11

Answer:

we don't have any wasted metal and everything goes perfectly. In the real world, waste is inevitable.

Answer:18

Step-by-step explanation:3^3 times 2