Answer:
A
Explanation:
the boat does not have a force to counter act the boys it must give which means it moves cause it is one something that is not as dense as the boy (I THINK)
b) If 35 grams of copper (II) chloride react with 20 grams of sodium nitrate, how much sodium chloride can be formed? what is the limiting reactant ? what is the excessive reactant ?
Answer:
CuCl₂ is the excessive reactant and NaNO₃ the limiting reactant, 13.7g of NaCl can be formed.
Explanation:
Based on the reaction:
CuCl₂ + 2NaNO₃ → 2NaCl + Cu(NO₃)₂
To solve the problem we must convert the mass of each reactant in order to find limiting reactant as follows:
Moles CuCl₂ -Molar mass: 134.45g/mol-:
35g * (1mol / 134.45g) = 0.26 moles
Moles NaNO₃ -Molar mass: 84.99g/mol-:
20g * (1mol / 84.99g) = 0.235 moles
For a complete reaction of 0.235 moles of NaNO₃ there are required:
0.235 moles NaNO₃ * (1 mol CuCl₂ / 2 mol NaNO₃) = 0.118 moles CuCl₂
As there are 0.26 moles CuCl₂,
CuCl₂ is the excessive reactant and NaNO₃ the limiting reactantAs 2 moles of NaNO₃ produce 2 moles of NaCl, he moles of NaCl produced are: 0.235 moles NaCl. The mass is:
Mass NaCl -Molar mass: 58.44g/mol-:
0.235 moles NaCl * (58.44g / mol) =
13.7g of NaCl can be formedsomeone help me on these two 2
Answer:
Question 4 is- Solubility
Question 5 is- Suspension
Hopes this helps >:D
In this experiment it takes about 10 microliters of solution to produce a spot 1 cm in diameter. If the Co (NO3)2 solution contains about 6 g Co2+ per liter, how many micrograms of Co2+ ion are there in one spot? 1 microliter - 1E-6 L 1 microgram = 1E-6 g
If the Co (NO₃)₂ solution contains about 6 g Co₂+ per liter, then there are 60 micrograms of Co₂+ ions in one spot.
To calculate the number of micrograms of Co₂+ ions in one spot, we need to convert the given concentration from grams per liter (g/L) to micrograms per microliter (µg/µL) and then multiply it by the volume of the spot.
Given:
Volume of solution for one spot = 10 µL
Concentration of Co₂+ ions in the solution = 6 g/L
First, we need to convert the concentration from grams per liter to micrograms per microliter:
6 g/L = 6 × (1E+6) µg/L (since 1 g = 1E+6 µg)
= 6 × (1E+6) µg / (1E+6) µL (since 1 L = 1E+6 µL)
= 6 µg/µL
Now, we can calculate the number of micrograms of Co₂+ ions in one spot:
Number of micrograms of Co₂+ ions = Concentration of Co₂+ ions × Volume of solution for one spot
= 6 µg/µL × 10 µL
= 60 µg
Therefore, there are 60 micrograms of Co₂+ ions in one spot.
To learn more about solution here
https://brainly.com/question/5111459
#SPJ4
Explain why has a higher boiling point than NH3
Explanation:
Melting point = -33.34°cboiling point=77.73°cListen and select the one of two statements that corresponds to each drawing. October 28 11:59 PM 1 attempt remaining Grade settings External referencesVocabulary list Grammar explanation 136-139 Questions Modelo You see:Illustration of a girl in a record store with headphones on. You hear: a. Ella sale a bailar. / b. Ella oye música. You select: b
The statement that corresponds to the drawing of a girl in a record store with headphones on is " Ella oye música." The correct statement is B.
This means "She is listening to music" in English. The drawing depicts a girl wearing headphones while standing in a record store. This indicates that she is most likely listening to music rather than going out to dance, which is what statement a suggests.The correct statement is b, Ella oye música, which correctly describes what the girl in the drawing is doing. She is listening to music.To sum up, when presented with the drawing of a girl in a record store with headphones on, the statement that corresponds to it is "b. Ella oye música." This means "She is listening to music" in English.For more questions on music
https://brainly.com/question/25634632
#SPJ8
in a certain viscous (glycerine), incompressible flow field with zero body forces the velocity components are
u = ay - b(cy - y^2)
v = w = 0
where a, b, and c are constants. (a) Use the Navier-Stokes equations to determine an expression for the pressure gradient in the x direction, (b) For what combination of the constants a, b, and c (if any) will the shearing stress, r xyz, be zero at y = 0 where the velocity is zero?
(a) The expression for the pressure gradient in the x direction is given by -∂p/∂x = ρ(u∂u/∂x) - μ(∂[tex]^2u[/tex]/∂x[tex]^2)[/tex].
(b) The combination of constants a, b, and c
To determine the expression for the pressure gradient in the x-direction using the Navier-Stokes equations, we start by writing the x-component of the Navier-Stokes equation for an incompressible flow with zero body forces:
ρ(∂u/∂t + u∂u/∂x + v∂u/∂y + w∂u/∂z) = -∂p/∂x + μ(∂[tex]^2u[/tex]/∂[tex]x^2[/tex] + ∂[tex]^2u[/tex]/∂[tex]y^2[/tex] + ∂[tex]^2u[/tex]/∂[tex]z^2[/tex])
where ρ is the fluid density,
u, v, and w are the velocity components in the x, y, and z directions respectively,
t is time, p is pressure,
μ is the dynamic viscosity,
and (∂/∂x) and (∂[tex]^2/[/tex]∂[tex]x^2[/tex]) denote partial derivatives with respect to x.
Given the velocity components u and v provided, we can see that v and w are both zero. Therefore, the x-component of the Navier-Stokes equation simplifies to:
ρ(∂u/∂t + u∂u/∂x) = -∂p/∂x + μ(∂[tex]^2u[/tex]/∂[tex]x^2)[/tex]
Since the flow is steady (there is no time dependence) and we are interested in the expression for the pressure gradient (∂p/∂x), we can neglect the (∂u/∂t) term.
The equation then becomes:
ρ(u∂u/∂x) = -∂p/∂x + μ(∂[tex]^2u[/tex]/∂[tex]x^2[/tex])
Rearranging the terms, we get:
-∂p/∂x = ρ(u∂u/∂x) - μ(∂[tex]^2u[/tex]/∂[tex]x^2[/tex])
Now, let's address part (b) of the question. We are looking for a combination of constants a, b, and c that will make the shearing stress, τ[tex]_{xyz},[/tex] zero at y = 0 where the velocity is zero.
The shearing stress τ[tex]_{xyz}[/tex] is given by:
τ[tex]_{xyz}[/tex]= μ(∂u/∂y + ∂v/∂x)
Since v is zero and we are interested in the point y = 0, the expression simplifies to:
τ[tex]_{xyz}[/tex] = μ(∂u/∂y)
Evaluating this expression at y = 0, we have:
τ_xyz|y=0
= μ(∂u/∂y)|y
=0
Given u = ay - b(cy - [tex]y^2[/tex]), we can find (∂u/∂y)|y=0 by taking the partial derivative with respect to y and evaluating it at y = 0:
(∂u/∂y)|y=0
= a - b(c - 2y)|y
=0
= a - b(c - 0)
= a - bc
Therefore, for the shearing stress to be zero at y = 0, we need:
τ[tex]_{xyz}[/tex]|y=0
= μ(∂u/∂y)|y
=0
This implies that a - bc = 0, or a = bc.
In summary:
(a) The expression for the pressure gradient in the x direction is given by
-∂p/∂x = ρ(u∂u/∂x) - μ(∂[tex]^2u[/tex]/∂x[tex]^2)[/tex].
(b) The combination of constants a, b, and c
Learn more about Pressure Gradient at
brainly.com/question/30463106
#SPJ4
Write an essay about the harm ful effects of sunlight to people. Minimum of ten sentences cite some expale of possible
Answer: See explanation
Explanation:
The sun is a star that's made up of several gases. It is known to be the most vital source of energy to living things.
Despite the importance of the sun in our lives, it's still harmful when one is exposed to it. They rays of light that's given our by the sun can be harmful to us.
Being exposed to the sun can cause sunburn and this can result in the damage of skin cells and development of cancer. Also, sunlight can lead to early aging as the skin ages faster when one is exposed to the sun.
Furthermore, exposure to sunlight can lead to eye injuries the tissue in our eyes can be damaged by the UV rays. Lastly, it also brings about lowered immune system.
state what happens to the boiling point and freezing point of the solution when the solution is diluted with an additional 100. grams of h2o( ).
Diluting the solution with an additional 100 grams of water will increase the boiling point and decrease the freezing point of the solution.
When a solution is diluted with an additional 100 grams of water, the boiling point and freezing point of the solution will both be affected.
Boiling Point:
The addition of more water to the solution increases the total volume of the solution. As a result, the concentration of solute particles in the solution decreases. According to Raoult's law, the vapor pressure of the solvent above the solution is directly proportional to the mole fraction of the solvent in the solution.
With a decrease in the concentration of solute particles, the mole fraction of the solvent increases, leading to a decrease in the vapor pressure of the solution. As a consequence, the boiling point of the solution increases.
Therefore, when the solution is diluted with additional water, the boiling point of the solution will be higher compared to the original, more concentrated solution.
Freezing Point:
Similar to the boiling point, the addition of more water increases the total volume of the solution and decreases the concentration of solute particles. According to the colligative properties of solutions, such as the freezing point depression, a decrease in the concentration of solute particles leads to a decrease in the freezing point of the solution.
Hence, when the solution is diluted with additional water, the freezing point of the solution will be lower compared to the original, more concentrated solution.
For more such questions on Diluting visit:
https://brainly.com/question/24881505
#SPJ8
an object is placed 25 cm in front of a lens of focal length 20 cm. 60 cm past the first lens is a second lens of focal length 25 cm. how far past the 25-cm lens does the final image form?
When an object is placed at a distance of 25 cm from the lens of focal length 20 cm, the image formed is virtual, erect and enlarged.
A virtual image is an image that appears to be behind the lens, and it is formed by light rays that do not actually pass through it but appear to diverge from it. The image is erect because it is the same size as the object, and it is enlarged because it is closer to the lens than the object.
The image formed by the first lens acts as the object for the second lens. The second lens has a focal length of 25 cm, and the final image is formed 60 cm past the second lens. Using the lens formula, the position of the image formed by the first lens is given by: 1/f = 1/v - 1/u Where f is the focal length of the lens, u is the object distance from the lens and v is the image distance from the lens.
Using the values given, we have: 1/20 = 1/v - 1/25So, 1/v = 1/20 + 1/25 = 9/1000v = 1000/9 = 111.11 cmThis means that the image formed by the first lens is 111.11 cm behind the first lens.
This image acts as the object for the second lens, and we can use the same formula to find the position of the final image. Using the same formula, we have: 1/25 = 1/v' - 1/111.11So, 1/v' = 1/25 + 1/111.11 = 4.84/1000v' = 1000/4.84 = 206.61 cm. Therefore, the final image is formed 206.61 cm past the first lens.
To know more about object refer here: https://brainly.com/question/28727729#
#SPJ11
a. Calculate the pH of a 1.67 ×× 10–2 M solution of aminoethanol.
b. Calculate the OH– concentration in a 4.25 ×× 10–4 M solution of aminoethanol.
c. A weather system moving through the American Midwest produced rain with an average pH of 5.04. By the time the system reached New England, the rain it produced had an average pH of 4.67. How much more acidic was the rain falling in New England?
Difference of 0.37 represents a difference of 10^(0.37) = 2.28 times more acidity in the rain falling in New England than in the rain produced by the weather system moving through the American Midwest.
In order to calculate the pH of a 1.67 × 10–2 M solution of aminoethanol, we need to make use of the acid dissociation constant (Ka) of the acid H2A:H2A (aq) ⇌ H+ (aq) + HA– (aq)Ka = [H+][HA–] / [H2A]pH = pKa + log ([A–] / [HA])At equilibrium, [H2A] = [A–] + [H+]Aminoethanol is an amphoteric compound, and can act as both an acid and a base. When dissolved in water, it undergoes the following equilibrium:Aminoethanol + H2O ⇌ NH3+CH2CH2OH + OH–Applying the acid dissociation constant of water and simplifying the expression:NH3+CH2CH2OH ⇌ NH3+ + CH2CH2OH–Ka = Kw / KbKb = Kw / KaBases are defined as substances that accept protons (H+), so the conjugate base of aminoethanol is NH2CH2CH2O–:NH2CH2CH2OH + H+ ⇌ NH3+CH2CH2OHThe pKa of NH3+CH2CH2OH is 9.69, so the Kb of NH2CH2CH2O– can be calculated:pKa + pKb = pKw14.00 + pKb = 14.00Kb = 4.16 × 10–6The concentration of OH– can be calculated from the Kb value:Kb = [OH–][NH3+CH2CH2OH] / [NH2CH2CH2O–][OH–] = Kb[NH2CH2CH2O–] / [NH3+CH2CH2OH][OH–] = Kb[NH2CH2CH2O–] / [NH3+CH2CH2OH] = (4.16 × 10–6)(1.67 × 10–2) / (1.67 × 10–2) = 4.16 × 10–8pOH = –log[OH–] = –log(4.16 × 10–8) = 7.38pH + pOH = 14.00pH = 14.00 – 7.38 = 6.62The pH of the solution is 6.62.b. To calculate the OH– concentration in a 4.25 × 10–4 M solution of aminoethanol, we can use the same approach as in part a, but we need to use the concentration value given and solve for [OH–]:NH3+CH2CH2OH + H2O ⇌ NH3+ + CH2CH2OH–Kb = Kw / KaKb = [OH–][NH3+CH2CH2OH] / [NH2CH2CH2O–][OH–] = Kb[NH2CH2CH2O–] / [NH3+CH2CH2OH][OH–] = Kb[NH2CH2CH2O–] / [NH3+CH2CH2OH] = (4.16 × 10–6)(4.25 × 10–4) / (4.25 × 10–4) = 4.16 × 10–8pOH = –log[OH–] = –log(4.16 × 10–8) = 7.38pH + pOH = 14.00pH = 14.00 – 7.38 = 6.62The OH– concentration in the solution is 4.16 × 10–8 M.c. The difference in pH between the two rain samples is 5.04 – 4.67 = 0.37.The pH scale is logarithmic, so a difference of 1.0 in pH represents a tenfold difference in acidity. Therefore, a difference of 0.37 represents a difference of 10^(0.37) = 2.28 times more acidity in the rain falling in New England than in the rain produced by the weather system moving through the American Midwest.
Learn more about acidity here:
https://brainly.com/question/29796621
#SPJ11
Baby oil is _?_ and will not mix with water.
.Calculate ΔS°rxn for the following. 4 NH3 (g) + 5 O2 (g) à 4 NO (g) + 6 H2O (g)
Substance
S° (J/mol × K)
NH3 (g)
192.8
O2 (g)
205.2
NO (g)
210.8
H2O (g)
188.8
can this be explained step by step?
The standard entropy change for the given reaction is -1052.0 J/K. The entropy change of the reaction is negative, which indicates that the reaction is not spontaneous.
Given, Reaction: 4 NH3 (g) + 5 O2 (g) à 4 NO (g) + 6 H2O (g)SubstanceS° (J/mol × K)NH3 (g)192.8O2 (g)205.2NO (g)210.8H2O (g)188.8The formula for finding the standard entropy of reaction is as follows:ΔS°rxn = ΣS°products – ΣS°reactantsWhere, ΔS°rxn = Standard entropy changeS°products = Sum of the standard entropies of the productsS°reactants = Sum of the standard entropies of the reactants. For the given reaction, the standard entropy change is calculated by finding the difference between the sum of standard entropies of products and the sum of standard entropies of reactants.ΔS°rxn = ΣS°products – ΣS°reactants= [4(S°NO) + 6(S°H2O)] – [4(S°NH3) + 5(S°O2)]= [4(210.8) + 6(188.8)] – [4(192.8) + 5(205.2)]= 843.6 – 1895.6= -1052.0 J/K. Thus, the standard entropy change for the given reaction is -1052.0 J/K. The entropy change of the reaction is negative, which indicates that the reaction is not spontaneous.
In the given question, we are asked to calculate the standard entropy change, ΔS°rxn. The formula for finding the standard entropy of reaction is:ΔS°rxn = ΣS°products – ΣS°reactantsWhere, ΔS°rxn = Standard entropy changeS°products = Sum of the standard entropies of the productsS°reactants = Sum of the standard entropies of the reactants. By using this formula and substituting the values from the table, we get:ΔS°rxn = ΣS°products – ΣS°reactants= [4(S°NO) + 6(S°H2O)] – [4(S°NH3) + 5(S°O2)]= [4(210.8) + 6(188.8)] – [4(192.8) + 5(205.2)]= 843.6 – 1895.6= -1052.0 J/K. Thus, the standard entropy change for the given reaction is -1052.0 J/K.
know more about entropy
https://brainly.com/question/24278877
#SPJ11
It takes 242. kJ/mol to break a chlorine-chlorine single bond. Calculate the maximum wavelength of light for which a chlorine-chlorine single bond could be broken by absorbing a single photon. Be sure your answer has the correct number of significant digits.
The maximum wavelength of light required to break a chlorine-chlorine single bond is approximately 4.947 x 10⁻⁷ meters or 494.7 nm (nanometers), rounded to four significant digits.
We can use the relationship between energy, wavelength, and speed of light to determine the maximum wavelength of light necessary to break a chlorine-chlorine single bond.
The equation which gives the energy of a photon is:
E = hc/λ
where:
E is the photon's energy.
Planck's constant, h, is (6.626 x 10⁻³⁴ Js)
2.998 x 10⁸ m/s is the speed of light, or c.
λ is the wavelength of light
We are aware that a chlorine-chlorine single bond must be broken with 242 kJ/mol of energy. This can be changed to joules per molecule as follows:
[tex]242 kJ/mol = \frac{242 \times 10^3 J}{(6.022 \times 10^{23} molecules/mol)} \approx 4.015 \times 10^{-19} J/molecule[/tex]
The equation can now be rearranged to find the maximum wavelength:
λ = hc/E
Putting in the values:
[tex]\lambda = \frac {(6.626 \times 10^{-34} Js)(2.998 \times 10^8 m/s)}{(4.015 \times 10^{-19} J/molecule)}[/tex]
Calculating the result:
[tex]\lambda \approx 4.947 \times 10^{-7} meters[/tex]
Learn more about wavelength here:
https://brainly.com/question/30532991
#SPJ4
C.
Calculate the number of moles in 62g of CO2
Answer:
32÷5
I'm just tryna get points I'm sorry
goodluck tho❤
What was the purpose of using water/soap solution for one of the trials?
In one of the trials, the purpose of using water/soap solution was to compare the cleanliness of the hand with washing by water alone.
Hand washing is one of the simplest, most effective ways to avoid getting sick and prevent the spread of germs. Washing your hands with soap and water is still one of the most important steps you can take to avoid getting sick and to avoid spreading germs to others. The purpose of using water/soap solution for one of the trials was to compare the cleanliness of the hand with washing by water alone.The experiment involves two trials to investigate the effectiveness of soap and water in removing bacteria from hands. In one trial, the participant washed their hands with soap and water. While in the other trial, the participant washed their hands with water alone. After washing, their hands were pressed on a petri dish with culture medium to grow the bacteria. Then, the plates were placed in an incubator at 37°C for two days to grow bacteria. The soap and water solution are effective in removing bacteria from hands because the soap helps to lift dirt, grease, and microbes off skin and onto the surfaces of the lather, so that it can be rinsed away by water.
To know more about water/soap solution visit:
https://brainly.com/question/13844861
#SPJ11
read the research paper, "molecular anatomy of a trafficking organelle" 2006 cell vol 127; 831–846. the authors chose to examine synaptic vesicles. why these versus other types of vesicles?
The authors of the research paper "Molecular Anatomy of a Trafficking Organelle" (Cell, 2006, Vol. 127; 831–846) chose to examine synaptic vesicles due to their crucial role in neuronal communication and synaptic transmission.
Synaptic vesicles are specialized organelles found in neurons that store and release neurotransmitters, which are essential for transmitting signals between nerve cells. They play a vital role in synaptic transmission, a fundamental process underlying brain function. The authors likely chose to focus on synaptic vesicles because understanding their molecular anatomy and trafficking mechanisms is crucial for unraveling the intricate processes involved in neuronal communication.
By studying synaptic vesicles, researchers can gain insights into how these vesicles are formed, transported, and targeted to specific regions within neurons. Investigating the molecular components and mechanisms involved in synaptic vesicle trafficking can provide valuable knowledge about neuronal function, synaptic plasticity, and neurotransmission. Furthermore, studying synaptic vesicles can contribute to our understanding of various neurological disorders associated with synaptic dysfunction, such as Alzheimer's disease, Parkinson's disease, and epilepsy. Therefore, the choice to examine synaptic vesicles in this research paper was likely driven by their significance in neuronal physiology and their potential implications for understanding and treating neurological disorders.
Learn more about physiology here: https://brainly.com/question/30764374
#SPJ11
PLEASE
The energy released per gram of material is __________.
A
much larger in nuclear fusion reactions than in chemical reactions
B
much smaller in nuclear fusion reactions than in chemical reactions
C
the same amount in nuclear fusion reactions as it is in chemical reactions
D
insignificantly larger in nuclear fusion reactions than in chemical reactions
Answer:
The Answer is gonna be C. the same amount in nuclear fusion reactions as it is in chemical reactions
How might the idea of continental drift explain 300-million-old glacial grooves on four separate southern continents?
The idea of Continental drift explains the presence of 300-million-old glacial grooves on four separate southern continents as they were once joined together and subject to the same climate conditions.
The theory of Continental drift states that the continents were once joined together as a supercontinent called Pangaea and have since drifted apart. This movement has caused the formation of geological features and altered the climate of the earth. 300-million-old glacial grooves have been found on four separate southern continents. This suggests that the continents were once joined together and were subject to the same climate conditions at the time of the formation of these grooves. These continents could have been connected through land bridges or narrow passages, which allowed for the migration of flora and fauna. The movement of these landmasses could have been caused by tectonic activity, which can be linked to the theory of Continental drift.
In conclusion, the idea of Continental drift explains the presence of 300-million-old glacial grooves on four separate southern continents as they were once joined together and subject to the same climate conditions.
To know more about Continental drift visit:
brainly.com/question/903117
#SPJ11
2. What property of a gas molecule affect (increase/decrease) the speed at which it diffuses? A Temperature B Kinetic energy C Vibration D Brownian motion
The property of a gas molecule that affects the speed at which it diffuses is the kinetic energy (Option B).
Diffusion refers to the process of gas molecules spreading out and mixing with other molecules in a medium, such as air. The speed at which diffusion occurs is influenced by the kinetic energy of the gas molecules.
As temperature increases (Option A), the kinetic energy of gas molecules also increases. Higher kinetic energy means that the gas molecules move faster and collide more frequently with each other and with other molecules in the medium. These collisions promote the mixing and spreading out of the gas molecules, leading to faster diffusion.
Vibration (Option C) and Brownian motion (Option D) are related to the movement and behavior of particles but are not directly associated with the speed of diffusion. Vibration refers to the oscillation of particles around a fixed position, while Brownian motion refers to the random motion of particles due to collisions with surrounding molecules.
In summary, it is the kinetic energy, influenced by temperature, that primarily determines the speed at which gas molecules diffuse. Higher kinetic energy leads to faster molecular motion and more rapid diffusion.
Option B is correct.
For more such questions on kinetic energy visit:
https://brainly.com/question/7694005
#SPJ8
Why isn’t there a lunar eclipse every time Earth is in between the sun and the Moon?
Answer: Exploratorium Senior Scientist Paul Doherty explains why not—the orbit of the moon is tilted relative to the orbit of the Earth around the sun, so the moon often passes below or above Earth. At those times, it does not cross the line between the sun and the Earth, and therefore does not create a solar eclipse.
HOPE THIS HELPS
Considering the following precipitation reaction:
Pb(NO3)2(aq) + 2KI(aq) → PbI2(s) + 2KNO3(aq)
What is the correct net ionic equation?
A) 2(NO3)- (aq) + 2K+(aq) → 2KNO3
B) Pb2+(aq) + 2(NO3)- (aq) + 2K+ (aq) + 2I- (aq) → PbI2(s) + 2K+ (aq) + 2(NO3)- (aq)
C) Pb2+ (aq) + I2-(aq) → PbI2(s)
D) Pb2+ (aq) + 2I- (aq) → PbI2(s)
The correct net ionic equation for the given precipitation reaction is; Pb²⁺ (aq) + 2I⁻ (aq) → PbI₂(s). Option D is correct.
In the reaction, Pb²⁺ cations from lead nitrate (Pb(NO₃)₂) react with I- anions from potassium iodide (KI) to form solid PbI₂ (lead iodide). This is a precipitation reaction where the insoluble salt PbI₂ is formed.
Option A (2(NO₃)⁻ (aq) + 2K⁺(aq) → 2KNO₃) is not the correct net ionic equation because it represents the dissociation and reformation of the soluble salts potassium nitrate (KNO₃) and lead nitrate (Pb(NO₃)₂), but it does not include the formation of the insoluble PbI₂ precipitate.
Option B (Pb²⁺(aq) + 2(NO₃)⁻ (aq) + 2K⁺ (aq) + 2I⁻ (aq) → PbI₂(s) + 2K⁺ (aq) + 2(NO₃)⁻ (aq)) is not the correct net ionic equation because it includes the spectator ions (K⁺ and NO₃⁻) that do not participate in the actual formation of the precipitate.
Option C (Pb²⁺ (aq) + I₂⁻(aq) → PbI₂(s)) is not the correct net ionic equation because it represents a direct combination of Pb²⁺ and I⁻ ions to form PbI₂, but in the given reaction, the iodide ions come from potassium iodide (KI), not from I₂.
Hence, D. is the correct option.
To know more about net ionic equation here
https://brainly.com/question/15467511
#SPJ4
which of the following laboratory procedures best illustrates the law of conservation of mass? (assume the product of the reaction includes the mass of any unused reactants.
The laboratory procedure best illustrates the law of conservation of mass is Option c "Burning 2.4 g of Mg in an open crucible to produce 2 g of MgO and unused reactants"
What is the law of conservation of mass?According to the law of conservation of mass, within an isolated system, mass remains constant and cannot be generated or annihilated, but rather undergoes transformations from one state to another.
For instance, by subjecting 32 grams of sulfur (S) and 56 grams of iron (Fe) to heat, they combine to form 88 grams of iron sulfide (FeS) alongside any unreacted starting materials.
Hence, the cumulative mass of the reactants, namely 32 grams of sulfur and 56 grams of iron, adds up to 88 grams, which aligns with the combined mass of the resultant product.
In this manner, it becomes evident that mass is neither eradicated nor brought into existence; rather, it seamlessly converts from one manifestation to another.
Consequently, the example involving the heating of 32 grams of sulfur and 56 grams of iron to yield 88 grams of iron sulfide, along with any remaining unreacted substances, aptly exemplifies the principle of the conservation of mass.
Learn about the law of conservation of mass here https://brainly.com/question/15289631
#SPJ4
Complete question:
Which of the following laboratory procedures best illustrates the law of conservation of mass?
a. Calculating the number of atoms in 11 g of Na
Using 250 g of impure Cu to obtain 200 g of pure Cu
b. Heating 32 g of S and 56 g of Fe to produce 88 g of FeS and unused reactants
c. Burning 2.4 g of Mg in an open crucible to produce 2 g of MgO and unused reactants
How many moles are in 56 L of CO2?
Answer:
we have four moles in 56L of co2
Give the expected hybridization of the central atom for the following molecules or ions.
(a) NO3−
(b) CCl4
(c) NCl3
(d) NO2−
(e) OCN− (carbon is the central atom)
(f) SeCl2
The expected hybridization of the central atom varies depending on the molecular geometry of the molecule or ion.
(a) NO3− - sp2 hybridization
(b) CCl4 - sp3 hybridization
(c) NCl3 - sp3 hybridization
(d) NO2− - sp2 hybridization
(e) OCN− (carbon is the central atom) - sp hybridization
(f) SeCl2 - sp3 hybridization
(a) NO3−:
The central atom in NO3− is nitrogen (N). Nitrogen is bonded to three oxygen (O) atoms. The nitrogen atom forms three sigma bonds with the three oxygen atoms, resulting in a trigonal planar molecular geometry. In a trigonal planar geometry, the nitrogen atom is sp2 hybridized.
(b) CCl4:
The central atom in CCl4 is carbon (C). Carbon is bonded to four chlorine (Cl) atoms. The carbon atom forms four sigma bonds with the four chlorine atoms, resulting in a tetrahedral molecular geometry. In a tetrahedral geometry, the carbon atom is sp3 hybridized.
(c) NCl3:
The central atom in NCl3 is nitrogen (N). Nitrogen is bonded to three chlorine (Cl) atoms. The nitrogen atom forms three sigma bonds with the three chlorine atoms, resulting in a trigonal pyramidal molecular geometry. In a trigonal pyramidal geometry, the nitrogen atom is sp3 hybridized.
(d) NO2−:
The central atom in NO2− is nitrogen (N). Nitrogen is bonded to two oxygen (O) atoms and has one lone pair of electrons. The nitrogen atom forms two sigma bonds with the two oxygen atoms, resulting in a bent molecular geometry. In a bent geometry, the nitrogen atom is sp2 hybridized.
(e) OCN− (carbon is the central atom):
The central atom in OCN− is carbon (C). Carbon is bonded to an oxygen (O) atom, a carbon (C) atom, and has one lone pair of electrons. The carbon atom forms two sigma bonds with the oxygen and carbon atoms, resulting in a linear molecular geometry. In a linear geometry, the carbon atom is sp hybridized.
(f) SeCl2:
The central atom in SeCl2 is selenium (Se). Selenium is bonded to two chlorine (Cl) atoms and has two lone pairs of electrons. The selenium atom forms two sigma bonds with the two chlorine atoms, resulting in a bent molecular geometry. In a bent geometry, the selenium atom is sp3 hybridized.
The expected hybridization of the central atom varies depending on the molecular geometry of the molecule or ion. The hybridization determines the arrangement of the atomic orbitals and is related to the geometry of the molecule.
To know more about hybridization, visit:
https://brainly.com/question/28468454
#SPJ11
How many molecules of N204 are in 85.0 g of N2O4?
Answer:
5.56 × 10^23 molecules
Explanation:
The number of molecules in a molecule can be calculated by multiplying the number of moles in that molecule by Avagadro's number (6.02 × 10^23)
Using mole = mass/molar mass
Molar mass of N2O4 = 14(2) + 16(4)
= 28 + 64
= 92g/mol
mole = 85.0/92
= 0.9239
= 0.924mol
number of molecules of N2O4 (nA) = 0.924 × 6.02 × 10^23
= 5.56 × 10^23 molecules
Which elements are
considered "Noble Metals"?
Answer:
ruthenium (Ru), rhodium (Rh), palladium (Pd), osmium (Os), iridium (Ir), platinum (Pt), gold (Au), silver (Ag).
Explanation:
The term "Noble Metals" traditionally refers to a group of metals that are resistant to corrosion and oxidation in moist or chemically aggressive environments. The elements commonly considered noble metals are Gold, Platinum, Palladium, Palladium, etc.
Gold is perhaps the most well-known noble metal. It is highly resistant to corrosion and oxidation. Platinum is another widely recognized noble metal. It is extremely resistant to corrosion and has a high melting point.
Palladium is a noble metal that exhibits excellent chemical stability and resistance to corrosion.
To learn more about Noble Metals, follow the link:
https://brainly.com/question/15775417
#SPJ6
Thank you it means alot if you help :)!
Answer:
10.Semi-Solid
11.Liquid
12.Solid
13:Semi-Solid
Ionic bonding, covalent bonding and metallic bonding are similar in that all three result in atoms having octets and greater stability. However, they differ in terms of the types of atoms that participate and whether the electrons are transferred or shared. Describe how ionic, covalent and metallic bonding differ in terms of elements participating in each bond and the way electrons are distributed.
Answer:
ionic --complete transferring
covalent--- sharing of electron
metallic bonding--- occurs between free electrons and metal ions.
Explanation:
In ionic bond, the electrons transfer from one atom to another atom. The atom which loses electrons is known as donor whereas the atom which accept electrons is known as acceptor. In covalent bond, atoms share electrons mutually means both atoms donate their electrons and no one loses their electrons, it can only be shared. Metallic bonding refers to the type of bonding in which electrostatic attractive force present between free electrons and positively charged metal ions.
a sealed vessel contains 15 kpa chlorine and 89 kpa fluorine in addition to some helium. the total pressure is 205 kpa. what is the partial pressure of heium in kpa
When more than one gas is present in a container, each gas exerts pressure, which is known as partial pressure. The partial pressure refers to the pressure of any gas inside the container. The partial pressure of the helium in kpa is 101.
Partial pressure is the pressure that one gas in a gas mixture will exert if it occupies the same volume on its own. In a mixture, every gas exerts a particular pressure. The partial pressures of the various gases in a mixture of an ideal gas add up to its total pressure.
The overall pressure exerted by a mixture of gases is equal to the sum of the partial pressures, according to Dalton's law of partial pressures.
P total= P₁ + P₂ + P₃ …
Here,
205 = pf + pCl + pHe
pHe = 205 - (pf + pCl)
pHe = 205 - (89+15) = 101 kpa
To know more about partial pressure, visit;
https://brainly.com/question/16749630
#SPJ4
Determine whether aqueous solutions of the following salts are acidic, basic, or neutral:
(a) K2CO3
(b) CaCl2
(c) KH2PO4
(d) (NH4)2CO3
Can you show work that was used to find out of the compound was acidic, basic, neutral.
The aqueous solutions of the following salts are:
(a) [tex]K_2CO_3[/tex]: Basic
(b) [tex]CaCl_2[/tex]: Neutral
(c) [tex]KH_2PO_4[/tex]: Acidic
(d) [tex](NH_4)_2CO_3[/tex]: Acidic
(a) [tex]K_2CO_3[/tex]:
The cation, [tex]K^+[/tex] (potassium ion), is derived from a strong base (KOH), which does not hydrolyze in water. Therefore, it does not contribute to the acidity or basicity of the solution. The anion, [tex]CO_3^{2-[/tex] (carbonate ion), is derived from a weak acid [tex]H_2CO_3[/tex], which can hydrolyze in water.
The hydrolysis of [tex]CO_3^{2-[/tex] can be represented as follows:
[tex]CO_3^{2-} + H_2O[/tex] ⇌ [tex]HCO_3^- + OH^-[/tex]
Since the hydrolysis of [tex]CO_3^{2-[/tex] results in the formation of [tex]OH^-[/tex] ions, the solution will be basic.
(b) [tex]CaCl_2[/tex]:
Both the cation, [tex]Ca_2^+[/tex] (calcium ion), and the anion, [tex]Cl^-[/tex] (chloride ion), are derived from strong acids and bases (HCl and [tex]Ca(OH)_2[/tex]). As a result, they do not undergo hydrolysis in water. Therefore, the solution will be neutral.
(c) [tex]KH_2PO_4[/tex]:
The cation, [tex]K_+[/tex] (potassium ion), does not undergo hydrolysis in water. The anion, [tex]H_2PO_4^-[/tex] (dihydrogen phosphate ion), can hydrolyze in water.
The hydrolysis of [tex]H_2PO_4^-[/tex] can be represented as follows:
H2PO4- + H2O ⇌ [tex]HPO_4^{2-} + H_2PO_4^- + H_3O^+[/tex]
Since the hydrolysis of [tex]H_2PO_4^-[/tex] results in the formation of [tex]H_3O^+[/tex] ions, the solution will be acidic.
(d) [tex](NH_4)_2CO_3[/tex]:
Both the cation, [tex]NH_4^+[/tex] (ammonium ion), and the anion, [tex]CO_3^{2-[/tex] (carbonate ion), can hydrolyze in water.
The hydrolysis of [tex]NH_4^+[/tex] can be represented as follows:
[tex]NH_4^+ + H_2O[/tex] ⇌ [tex]NH_3 + H_3O^+[/tex]
Since the hydrolysis of [tex]NH_4^+[/tex] results in the formation of [tex]H_3O^+[/tex] ions, the solution will be acidic.
To learn more about Acidic follow the link:
https://brainly.com/question/14072179
#SPJ4