PLEASEEE HELPPPPP does anyone know these answers?

Answer:

Explanatio

Increasing the speed of the relative motion between the coil and the magnet – If the same coil of wire passed through the same magnetic field but its speed or velocity is increased, the wire will cut the lines of flux at a faster rate so more induced emf would be produced. 3)n:

Answer:easter

Explanation:

Answer:

Easter

Explanation:

did it on edge, and searched it up

Answer:

a.  (VL)R/ωL[1 - cos[ωt]]  = (10.84 V)[1 - cos[(487rad/s)t]]

b. 1.084 mV

Explanation:

a. Since it is a series circuit, the current in the inductor is the same as the current in the resistor.

Now, the voltage across the inductor vL = -Ldi/dt.

So, the current, i = -1/L∫vLdt.

Now, vL = −(12.0V)sin[(487rad/s)t] and L = 0.200 H

Substituting these into i, we have

i = -1/L∫vLdt

= -1/0.200H∫[−(12.0V)sin[(487rad/s)t]]dt.

= -[−(12.0V)]/0.200H∫[sin[(487rad/s)t]]dt.

= 60V/H∫[sin[(487rad/s)t]]dt

Integrating i, we have

i = 60V/H ÷ [(487rad/s)[-cos[(487rad/s)t]] + C

at t = 0, i(0) = 0

0 = 60V/H ÷ [(487rad/s)[-cos[(487rad/s)× 0]] + C

0 = 60V/H ÷ [(487rad/s)[-cos[0]] + C

0 = 60V/H ÷ [(487rad/s)[-1]+ C

C = 60V/H ÷ [(487rad/s)

So, i = 60V/H ÷ [(487rad/s)[-cos[(487rad/s)t]] + 60V/H ÷ [(487rad/s)

i =  60V/H ÷ [(487rad/s)[1 - cos[(487rad/s)t]]

i = (0.123A)[1 - cos[(487rad/s)t]] = VL/ωL[1 - cos[ωt]] where ω = 487rad/s and VL = 12.0 V and L = 0.200 H

So, the voltage across the resistor vR = iR where R = resistance of resistor = 88.0 Ω

So, vR = iR = VL/ωL[1 - cos[ωt]] × R = (VL)R/ωL[1 - cos[ωt]]

=  (0.123A)[1 - cos[(487rad/s)t]] × 88.0 Ω

= (10.84 V)[1 - cos[(487rad/s)t]]

b. vR at t = 2.00 ms = 0.002 s

So, vR = (10.84 V)[1 - cos[(487rad/s)(0.002)]]

= (10.84 V)[1 - cos[0.974]]

= (10.84 V)[1 - 0.9999]

= (10.84 V)(0.0001)

= 0.001084

= 1.084 mV

Answer:

W = 1750 J

Explanation:

It is given that,

Weight of a computer, F = 50 N

A student wants to keep it on the 5th floor which is 35 meters up.

We need to find the work done by her to drag her computer up the stairs. Let it is W. Using the formula of work as follows :

W = F d

Put all the values,

W = 50 N × 35 m

W = 1750 J

So, 1750 J of work is done by her to drag the computer up the stairs.

The 400-foot altitude limit was put in place for the sake of airspace safety, and there is a risk to country security as well as the privacy of citizens.

Unmanned aerial vehicles (UAVs), sometimes known as drones, are used for a variety of jobs, from routine to extremely dangerous. These robotic-looking planes can be seen practically everywhere, from delivering groceries to your home to rescuing avalanche victims.

The 400-foot altitude restriction was ultimately implemented for airspace safety. Given the breadth of the airspace above 400 feet, the likelihood of a drone colliding with a human aircraft is exceedingly remote, but the consequences might be disastrous.

Any aerial vehicle that uses software to fly autonomously or that may be controlled remotely by a pilot is referred to as a drone. Numerous drones come equipped with cameras to gather visual data and propellers to stabilize flying paths. Drone technology has been incorporated into industries like videography, search and rescue, agriculture, and transportation.

When in uncontrolled (Class G) airspace, your drone must be flown 400 feet above the ground or less.

To know more about drones:

https://brainly.com/question/27753670

#SPJ2

Answer:

A dump truck.

Explanation:

Inertia can be defined as the tendency of an object or a body to continue in its state of motion or remain at rest unless acted upon by an external force.

In physics, Sir Isaac Newton's first law of motion is known as law of inertia and it states that, an object or a physical body in motion will continue in its state of motion at continuous velocity (the same speed and direction) or, if at rest, will remain at rest unless acted upon by an external force.

Mathematically, it is given by the formula;

[tex] F = ma[/tex]

Where;

The inertia of an object such as a tractor trailer rig is greatly dependent or influenced by its mass; the higher quantity of matter in a dump truck, the greater will be its tendency to continuously remain at rest.

Hence, a dump truck would probably need the greatest force to overcome its inertia because it has more mass than all the other objects in the category. Also, the mass of an object is directly proportional to its inertia, as well as the force applied.

Answer:As one of Newton's Laws of Gravitational force The answer would Be a dump truck because it includes one of Newton's Laws of Gravitational force in the abstract Laws of gravity.

The complete question is as follows:

A cow is given a growth hormone  and then compared to another cow that  was not given a growth hormone. Both  cows were weighed at 2 years. What is the independent variable?

if the cow is given growth hormone or not  

weight of the cow

same cows  

type of growth hormone

Answer:

The correct answer is - if the cow is given growth hormone or no

Explanation:

The independent variable is here is if the growth hormone is given or not as the variable which is subject to change or manipulated during an investigation and affects the dependent variable is known as the independent variable.

Due to this independent variable manipulation the weight of the cows might be different which makes the weights as the dependent variable.

Answer:

Gravity acts on all objects in the universe.

Explanation:

Answer:

$30

Explanation:

Given that,

Power of a water heater, P = 2000 Watts

It is on for a total of 150 hours a month.

2000 Watts = 2 kW

Time, t = 150 hours

Energy used by the water heater is given by :

[tex]E=P\times t\\\\E=2\ kW\times 150\ h\\\\E=300\ kWh[/tex]

It is also mentioned that the cost is 10 cents per kWhr.

Since, $1 = 100 cents

10 cents = $0.1

So, the total cost for the month is :

Cost = 300 × 0.1

Cost = $30

So, the required cost is $30.

Answer:

yes

Explanation:

people still skateboard that is an easy question

Answer:

W = 0.49 N

τ = 0.4851 Nm

Force

Explanation:

The weight force can be found as:

W = mg

W = (0.05 kg)(9.8 m/s²)

W = 0.49 N

The torque about the pivot can be found as:

τ = W*d

where,

τ = torque

d = distance between weight and pivot = 99 cm = 0.99 m

Therefore,

τ = (0.49 N)(0.99 m)

τ = 0.4851 Nm

The pivot exerts a  FORCE on the meter stick because the pivot applies force normally over the stick and has a zero distance from stick.

Answer:

Examples include listening carefully to what someone is saying while ignoring other conversations in a room (the cocktail party effect) or listening to a cell phone conversation while driving a car. Attention is one of the most intensely studied topics within psychology and cognitive neuroscience.

Answer:

Average velocity = 5.9 km/ hr (or 1.64 m/s).

Explanation:

Velocity = [tex]\frac{displacement}{time}[/tex]

It is a vector quantity and has an SI unit of m/s.

Displacement = [tex]\sqrt{x^{2} + y^{2} }[/tex]

x = 5 km east

y = 6 km north + 4 km north

  = 10 km north

So that,

Displacement = [tex]\sqrt{5^{2} + 10^{2} }[/tex]

                       = [tex]\sqrt{25 + 100}[/tex]

                       = [tex]\sqrt{125}[/tex]

                       = 11.1803

Displacement = 11.18 km = 11180 m

Time = 1.9 hr = 6840 seconds

Average velocity = [tex]\frac{11.180}{1.9}[/tex]

             = 5.8842

Average velocity = 5.9 km/ hr

The average velocity is 5.9 km/ hr (or 1.64 m/s).

Complete Question

A rolling ball moves from [tex]x_1 = 8.0 \ cm[/tex] to [tex]x_2 = - 4.1 \ cm[/tex] during the time from [tex]t_1 = 2.9 s[/tex]  to  [tex]t_2 = 6.0s[/tex]

What is its average velocity over this time interval?

Answer:

The velocity is  [tex]v = 3.903 \ m/s[/tex]

Explanation:

From the question we are told that

    The first position of the ball is  [tex]x_1 = 8.0 \ cm[/tex]

    The second position of the ball is  [tex]x_2 = - 4.1 \ cm[/tex]

Generally the average velocity is mathematically represented as

       [tex]v = \frac{ x_1 - x_2}{t_2 - t_1}[/tex]

=>    [tex]v = \frac{ 8 - -4.1 }{ 6 - 2.9 }[/tex]

=>    [tex]v = 3.903 \ m/s[/tex]

A.)

Water is the name of the pure substance H₂O

B.)

Hydrogen and Oxygen are the compound of water

C.)

Yes, we can

D.)

This process known as Electrolysis

Answer:

s = 6.25 10⁻²² m

Explanation:

Polarizability is the separation of electric charges in a structure, in the case of the atom it is the result of the separation of positive charges in the nucleus and the electrons in their orbits, macroscopically it is approximated by

                p = q s

               s = p / q

let's calculate

              s = 1 10⁻⁴⁰ / 1.6 10⁻¹⁹

              s = 0.625 10⁻²¹ m

              s = 6.25 10⁻²² m

We see that the result is much smaller than the size of the atom, therefore this simplistic model cannot be taken to an atomic scale.

Answer:

b. 450 nm

Explanation:

The wavelength of light can be calculated by using the formula derived in Young's double slit experiment. The formula is as follows:

Δx = λL/d

Δx/2 = λL/2d

where,

Δx/2 = half distance between consecutive dark fringes = width of central maximum = 0.75 cm = 0.0075 m

λ =  wavelength of light = ?

L = Distance of Screen = 1.25 m

d = width of slit = 0.15 mm = 0.00015 m

Therefore,

0.0075 m = λ(1.25 m)/(0.00015 m)

λ = (0.0075 m)(0.00015 m)/2(1.25 m)

λ = 4.5 x 10⁻⁷ m = 450 nm

Thus, the correct option is:

b. 450 nm

Answer:

The momentum of the car is 3190.74 kgm/s

Explanation:

Given;

weight of the car, w = 1,356 N

velocity of the car, v = 83 km/h = 23.06 m/s

The mass of the car is given by;

m = w/g

where;

g is acceleration due to gravity = 9.8 m/s²

m = 1356 / 9.8

m = 138.367 kg

The momentum of this car is given by;

P = mv

P = (138.367 x 23.06)

P = 3190.74 kgm/s

Therefore, the momentum of the car is 3190.74 kgm/s

Answer:

33 Inches

Explanation:

The movement of the ant is sketched in the attached image. The ant moved from the 19-inch mark to 27-inch mark covering a distance of 13 Inches (27 - 19). Finally, it moved from the 27-inch mark to 7-inch mark covering a distance of 20 Inches (27 - 7).

Total Distance covered = 13 + 20 = 33 Inches.

Hence, the total distance the ant traveled is 33 Inches.

Answer:

You will be very glad to know that my preparation for HSC examination is very good. I have prepared myself for the HSC Examination 2015. I am confident that I will obtain very good marks in the examination. I have revised them several times and I am hopeful of obtaining distinction marks in all the subjects.

Explanation:

This is from Brainly hope this person helped you

Answer:

the answer is a time your welcome

Answer:

(1)

Explanation:

Answer:

s = 83.85 km

Explanation:

First we calculate the distance covered by car, while traveling at constant speed:

s₁ = v₁t₁

where,

s₁ = distance covered at constant speed = ?

v₁ = constant speed = 23 m/s

t₁ = time of travel at constant speed = 1 hr = 3600 s

Therefore,

s₁ = (23 m/s)(3600 s)

s₁ = 82800 m = 82.8 km

Now, we calculate the distance travelled in accelerated motion. First we use 1st equation of motion to find acceleration:

Vf = Vi + at₂

where,

Vf = Final velocity = 40 m/s

Vi = Initial Velocity = 30 m/s

a = acceleration = ?

t₂ = time = 30 s

Therefore,

40 m/s = 30 m/s + a(30 s)

a = 10 m/s/30 s

a = 0.33 m/s²

Now, we use 2nd equation of motion for distance:

s₂ = Vi t₂ + (1/2)at₂²

s₂ = (30 m/s)(30 s) + (1/2)(0.33 m/s²)(30 s)²

s₂ = 900 m + 150 m

s₂ = 1050 m = 1.05 km

So, the total distance covered was:

s = s₁ + s₂

s = 82.8 km + 1.05 km

s = 83.85 km

Answer:

10 seconds

Explanation:

Answer:

s = 1190.3 m = 1.19 km

Explanation:

First we find the acceleration by using first equation of motion:

Vf = Vi + at

where,

Vf = Final Velocity = 74.44 m/s

Vi = Initial Velocity = 36.96 m/s

a = acceleration = ?

t = time = 21.37 s

Therefore,

74.44 m/s = 36.96 m/s + a(21.37 s)

a = (74.44 m/s - 36.96 m/s)/21.37 s

a = 1.75 m/s²

Now, we use 2nd equation of motion to find distance covered (s):

s = Vi t + (1/2)at²

s = (36.96 m/s)(21.37 s) + (1/2)(1.75 m/s²)(21.37 s)²

s = 789.83 m + 400.47 m

s = 1190.3 m = 1.19 km

Answer:

0.585V

Explanation:

Given that:

B = 3.00 × 10-5 T

l = 75.0 m

v = 260 m/s

From Blv = emf between the wing tips

= 3.00 × 10-5 T × 75×260

= 117/200

= 0.585V

Hence, the emf between the wing tips is 0.585V

Answer:

I found "As nouns the difference between resultant and equilibrium is that resultant is anything that results from something else; an outcome while equilibrium is the condition of a system in which competing influences are balanced, resulting in no net change. is following as a result or consequence of something."

Explanation: