True because you can be precise with the same measurements but they can be not the correct area so
it should be TRUE
28
Aisha was preparing two cupcakes with the same
mass and volume in the same oven. In order to
determine the specific heat of the cupcakes, Aisha
measured the temperature of each one at four
different times. The graph below shows the changes
in temperature with time.
Answer:
Explanation:
I am sorry but the graph is not given
solid particles deposit at the base of a vessel why?
Answer: solid particles deposit at the base of the vessel because they are heavy compared to the liquid particles.
Explanation:
Name the following covalent molecules:
SeF
Answer:
do you mean DeF?
Explanation:
Water dissolves salt by the process of __ breaking down salt into ions forming a(n) __ solution which conducts electricity.
A. ionization, electrolyte
B. ionization, nonelectrolyte
C. dissociation, electrolyte
D. dissociation, nonelectrolyte
Answer:
b
Explanation:
B.................................................................
The elements from this section of the periodic table all belong to the same
A. Family
B. Group
C. Period
D. Valence
Plz help!!
Answer:
C. Period
Explanation:
The elements from this section of the periodic table belongs to the same period.
A period on the periodic table is a horizontal arrangement of elements according to their atomic number.
A group or family is the vertical organization of elements. Valence is the number of outer shell electrons an atom possess.Using the balanced reaction below, drag and drop the terms into the correct location to solve the following problem:
If 1.5 moles of ethanol (C2H5OH) react, how many moles of water will be formed?
2 C2H5OH + 7 O2 --> 4 CO2 + 6 H2O
Answer:
4.5 moles of H2O.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
C2H5OH + 3O2 —> 2CO2 + 3H2O
From the balanced equation above,
1 moles of C2H5OH reacted to produce 3 moles of H2O.
Finally, we shall determine the number of mole of H2O produced by the reaction of 1.5 moles of C2H5OH. This can be obtained as follow:
From the balanced equation above,
1 moles of C2H5OH reacted to produce 3 moles of H2O.
Therefore, 1.5 moles of C2H5OH will react to produce = 1.5 × 3/ 1 = 4.5 moles of H2O.
Thus, 4.5 moles of H2O will be produced.
How many mL of methanol would
you add to water to make 250.0 mL
of a 14.5% methanol solution (v/v%)?
Answer: 36.25
Explanation:
Answer:
36.25
Explanation:
The Law of Superposition allows us to determine:
a
which rock layers are the oldest
b
the relative age of layers of rocks and the fossils in them
c
the exact or absolute age of rock layers
d
a and b are correct
Answer:
d . a and b are correct
Explanation:
The law of superposition allows us to determine the age of rock layers and also that of the fossils within them.
The law of superposition states that "in an undeformed sequence of strata, the oldest rock layer is at the bottom and the youngest is on top".
Using this law, geochronologists can determine the relative ages of rock layers. The youngest layer will be found on top. The oldest at the bottom of the sequence. The arrangement of the layers and the fossils there in can also tell us about the ages of the fossils themselves.What is the shorthand configuration for Ca2+
1s2 2s 2p6 3s2 3p6
Explanation:
calcium has lost 2 electrons.
Which of the following is NOT a product of photosynthesis?
A. Glucose
B. Energy
C. Oxygen
D. Carbon dioxide
!!! EMERGENCY PLEASE ANSWER WITHIN THE FIRST MINUTE YOU SEE THIS !!!
Give the proper name for this compound formula, O2^2-:
A.) Oxide
B.) Oxygen
C.) Oxate
D.) Peroxide
Answer:
Its tetraoxygen
Explanation:
3. What type of particles move to create electicity?
Electrical energy is caused by moving particles that have a negative or positive charge. These charged particles are called electrons. The faster the electrons are moving, the more electrical energy they carry. Electrical energy commonly moves through a wire in an electrical circuit.
[tex]\huge\boxed{Electrons.}[/tex]
_____________________________________Explanation...Electrons are particles that move to create electricity. In other words, they are responsible for electric currents. Thus, the answer should be Electrons.
_____________________________________[tex]\boxed{Hope\;i\;helped!}\\\\\\\huge\boxed{Thanks,Plip.}[/tex]
Somebody knows a good explanation for quantic numbers in chemistry???
Answer:
No I don't.
Explanation:
LOL!!
What makes metals, in particular, good conductors of electricity?
A.
the ability of electrons to flow throughout the metal
B.
the absence of charged particles
C.
the high temperatures required to break metallic bonds
D.
the presence of positive and negative ions
Answer:
the answer is A(the ability of electrons to flow through out the metal)
What are the two main factoErosion by wind and water can move pieces of soil and rock.
As these materials settle on top of each other, they are pressed together, forming _______.rs in the mantle that contribute to the rock cycle
Answer:
purppurppurppurppurppurp
The total number of electrons in the outer shell of a sodium atom is?
A. 1
B.2
C.8
D.18
Answer:
1
Explanation:
outershell atoms of an element are also known as valency of that element
so the valency and number of elctron in the outershell of a sodium atom is +1.
hope this will help
mark me as brilliant
can you identify an atom without knowing numbers of neutrons in it?
Answer:
No
Explanation:
We cannot identify an atom without knowing numbers of protons in the atom.
The number of neutrons is the amount of neutrally charged particles in an atom. These subatomic particles occupy the dense nucleus with the protons.
To determine an atom, we use their atomic numbers. Atomic number is the number of protons in an atom. Protons are the positively charged particles in the atom. The periodic table of elements is arranged by the atomic number of an element.What is the percent change when an iodine atom (I) becomes an ion (I-)?
What is formed when two liquids are combined but do not mix?
Answer:immiscible
Explanation:
When two liquids combine to form a new liquid, we call the liquids “miscible.” When two liquids do not mix together and instead form layers, we call them “immiscible.” The chemical properties of the liquids will determine if they will mix or not.
The density of 25.0 g of silver is 10.5 g/cm^3. What's the density of 95.5 g of silver?
Answer:
10.5g/cm³
Explanation:
Since the density of the silver is 10.5g/cm³, any pure sample of silver will have the same value as the density of silver.
Density is the mass per unit volume of a substance.
It is an intrinsic property of matter and does not depend on the amount of matter it contains. Every unique sample of an element or substance will have the same density no matter how big or small they are. So, despite an increase in mass for the given substance, the density will still be the same.Did the chemical reaction absorb or release energy? How do you know?
Answer:
Explanation:
All chemical reactions involve energy. Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Endothermic reactions absorb energy, and exothermic reactions release energy. The law of conservation of energy states that matter cannot be created or destroyed.
The chemical reaction absorbs energy by comparing the energy received when bonds in the reactants are broken with the energy released when bonds in the products are formed. Exothermic is refers to chemical reactions that release the energy.
What is chemical reaction ?The term chemical reaction is defined as a process that leads to the chemical transformation of one set of chemical substances to another.
If heat is absorbed during the reaction,then the change in enthalpy is positive and if heat is released, then the change in enthalpy is negative.
All chemical reactions contain energy. But, not all chemical reactions release energy. In some chemical reactions, the energy is absorbed rather than released.
Thus, The chemical reaction absorbs energy by comparing the energy received when bonds in the reactants are broken with the energy released when bonds in the products are formed.
To learn more about the chemical reaction, follow the link;
https://brainly.com/question/3461108
#SPJ5
What is different about the rotation of Uranus?
the axis is vertical
there is no axis of rotation
the axis is pointing toward the sun
Answer:
Unlike the other planets of the solar system, Uranus is tilted so far that it essentially orbits the sun on its side, with the axis of its spin nearly pointing at the star. This unusual orientation might be due to a collision with a planet-size body, or several small bodies, soon after it was formed.
Explanation:
the axis is vertical
Answer:
The axis is pointing towards the sun!!!
Explanation:
How many kilojoules of heat energy are absorbed when 98.5 g of water are heated from 24.5 oC to 48.8 oC?
Answer:
10.01461 kilojoules of thermal energy are absorbed when 98.5 g of water is heated from 24.5 ° C to 48.8 ° C
Explanation:
Sensible heat is the amount of heat that a body absorbs or releases without any changes in its physical state (phase change) causing a change in temperature.
The equation that allows to calculate heat exchanges in this case is:
Q = c * m * ΔT
where Q is the heat exchanged by a body of mass m, constituted by a substance of specific heat c and where ΔT is the change in temperature.
In this case:
c=4.184 [tex]\frac{J}{g*C}[/tex]m= 98.5 gΔT= Tfinal - Tinitial= 48.8°C - 24.5°C= 24.3 °CReplacing:
Q= 4.184 [tex]\frac{J}{g*C}[/tex] *98.5 g* 24.3 °C
Solving:
Q=10,014.61 J
Since 1 J is equal to 0.001 kJ, then you can apply the following rule of three: if 1 J is equal to 0.001 kJ, then 10,014.61 J is equal to how many kJ?
[tex]kJ=\frac{10,014.71 J*0.001 kJ}{1 J}[/tex]
kJ=10.01461 kJ
10.01461 kilojoules of thermal energy are absorbed when 98.5 g of water is heated from 24.5 ° C to 48.8 ° C
What is the energy of a microwave photon that has a frequency of 9.86 x 1012 Hz?
Answer:
6.533 × 10^-21J
Explanation:
The energy of the microwave photon can be calculated using:
E = hf
Where;
E = energy of photon (J)
h = Planck's constant (6.626 × 10^-34 J/s)
f = frequency (9.86 x 10^12 Hz)
Hence, E = hf
E = 6.626 × 10^-34 × 9.86 x 10^12
E = 65.33 × 10^(-34 + 12)
E = 65.33 × 10^(-22)
E = 6.533 × 10^-21J
The energy of the microwave photon is
6.533 × 10^-21J
PLZ HELP
Select the correct answer from each drop-down menu.
Water pollution and air pollution in an area have been steadily increasing. What can students do to address these environmental hazards?
A. Pass Laws
B. Organize seminars
C. Create a tax collection
to educate other students about the deteriorating environmental conditions and the steps needed to
improve the area. Also, encourage other students to volunteer for workshops about
A. recycling and waste disposal
B. Poaching
C. Deforestation
Students can address water and air pollution by organizing seminars to raise awareness and educate others about the issues,
A. Organize seminars
B. recycling and waste disposal
Water pollution and air pollution are significant environmental hazards that require collective efforts to address. Students can play a crucial role in raising awareness and taking action to mitigate these issues. Here are the appropriate answers from the given options:
What can students do to address these environmental hazards?
A. Organize seminars
B. recycling and waste disposal
A. Organize seminars: Students can organize seminars or workshops to educate other students and the community about the deteriorating environmental conditions and the steps needed to improve the area. By sharing knowledge and information, students can raise awareness about the causes and impacts of water and air pollution, as well as the potential solutions to mitigate them. Seminars can provide a platform for experts, scientists, and environmentalists to share their expertise and inspire action.
B. Recycling and waste disposal: Encouraging other students to volunteer for workshops about recycling and waste disposal is an effective step toward addressing environmental hazards. By promoting proper waste management practices, such as recycling, composting, and reducing single-use plastics, students can contribute to minimizing pollution and conserving resources. These workshops can educate students on the importance of responsible waste disposal and provide practical tips and techniques to implement in their daily lives.
In summary, students can address water and air pollution by organizing seminars to raise awareness and educate others about the issues, as well as by promoting recycling and proper waste disposal practices. Through these actions, students can foster a culture of environmental stewardship and inspire positive change in their communities.
for more such question on pollution visit
https://brainly.com/question/22517940
#SPJ8
ASAP NEED HELP, WILL MARK BRAINLEST, WHEN ASKING A QUESTION I REPEAT DO NOT ASK IT IN THE ANSWER SECTION, THANKS FOR READING. (btw: You have to draw it, then take a picture or screenshot the answer as it cannot be answered via text)
Answer:
Look at the images/files below :) Hope it helps Have a great day!
Explanation:
Answer:
Its F S E F Hope this helped :D
Summary
How do different materials respond to heat?
Answer:
Conductors easily absorb heat and An insulator does not conduct heat well
Explanation:
what element is Column 1, period 3
Answer:
Sodium (Na)
Explanation:
The element on the periodic table at Column (group) 1, period 3 is Sodium (Na)
Sort the vocabulary word below. Make sure you have come to live session or watched the 5.03 recording. These words will be important to know for the rest of this unit.
Question 1 options:
This is a flow of electrons (such as the flow of electrons in a wire to light up a lamp).
These stop the electricity from flowing (think rubber and glass).
This is slowing the flow of electrons (the current) and where some of the electrons' energy gets converted into heat.
These allow electricity to flow easily through them (think copper and aluminum).
1.
Electric Current
2.
Resistance
3.
Conductor
4.
Insulator
(Sorry it's such a long question!)
Answer:
Electric Current
This is a flow of electrons (such as the flow of electrons in a wire to light up a lamp).
Insulator
These stop the electricity from flowing (think rubber and glass).
Resistance
This is slowing the flow of electrons (the current) and where some of the electrons' energy gets converted into heat.
Conductor
These allow electricity to flow easily through them (think copper and aluminum).
*20 points for anyone who can solve this!*
If the temperature of the water inside of the pressure cooker is greater than 104°C, and the water is still a liquid, then the pressure inside of the pressure cooker must be...
A) less than 1 atm
B) equal to 1 atm
C) greater than 1 atm